순환골재를 사용한 철근콘크리트 부재에서 휨강도에 비하여 전단성능 저하가 문제점으로 제기되고 있다. 이를 해결하기 위한 방법으로 강섬유를 콘크리트 보강재로 사용할 수 있다. 본 연구에서는 순환골재를 사용한 SFRC 보의 전단실험을 통하여 강도 및 변형 특성을 파악하고자 하였다. 주요 실험변수는 강섬유 혼입률(0, 0.5%, 1%), 순환골재 치환율(0%, 100%), 전단경간비(a/d = 1, 2) 등이다. 실험결과 실험에 의한 전단강도는 강섬유의 혼입률이 증가할수록 전단경간비가 작아질수록 증가하였다. 강섬유 1% 혼입한 순환골재의 경우 일반 골재에 비해 최대전단내력이 1.77~6.25% 증가한 반면에 강섬유 0∼0.5% 혼입한 실험체에서는 일반골재에 비해 순환골재가 24.2%∼49.2%의 전단강도가 저하되었다. 이를 볼 때 1% 강섬유 보강에 의하여 순환골재 사용에 따른 강도 저하를 방지하는데 크게 기여하는 것을 알 수 있다.

이 연구는 유공보강근의 형상에 따른 철근콘크리트 유공 보의 전단저항성능을 평가하기 위하여 4체의 실험체를 제작하여 전단실험을 수행하였다. 실험의 주요변수는 유공의 유무, 유공보강 유무, 유공 보강근의 형상으로 하였으며, 제안 유공 보강근은 시공성을 고려하여 사각형과 마름모형이 혼합된 나선형 형태이다. 실험결과, 이 연구에서 제안된 유공보강근은 유공 주변의 균열을 효과적으로 제어하여 실험체의 전단력 향상에 효과적임을 확인하였다. 또한 현행설계기준은 유공 보강근을 배근한 실험체의 실험결과를 과소평가하는 것으로 나타났다.

The joints in this construction are formed through the bonding shear evaluation method during the placement of ultra-high-performance concrete (UHPC). The evaluation items include push-off tests for homogeneous UHPC + UHPC. The experimental samples comprised a monolithic placement as the baseline, two levels for the separated placement according to the compression strength of concrete, and five levels for the interface treatment. The bonding shear performance for the homogeneous UHPC + UHPC construction linearly increased with the width and depth of the grooves used for the interface treatment. The increase in the number of grooves and their cross-sectional areas only slightly influenced the bonding shear performance. The optimal interface treatment method for the homogeneous UHPC + UHPC construction grooves was at least 30 mm.

Effect of confining pressure on the shear strength of ultra-high-performance fiber-reinforced concrete (UHPFRCs) was investigated using a new shear test setup. Different confining pressures were applied and maintained to the specimens prior to shear testing. The shear strength of UHPFRCs was obviously sensitive to the confining pressure: the higher confining pressure produced higher shear strength. The confined shear strength could be expressed as a function of unconfined shear strength, confining pressure, and tensile strength.

This research is about design optimization and performance evaluation for composite PC slabs using improved horizontal shear connectors. As a result of the tests, the improved shear connectors show structural performance even when they are placed only in the required section.

Recently, the demand for large diameter piles has been rapidly increased in order to secure the allowable bearing capacity of pile foundation due to the increase of large structures such as high rise buildings. In this study, to improve the shear capacity of a conventional PHC pile, a large diameter composite PHC pile strengthened by in-filled concrete and shear reinforcement was manufactured. All the piles were tested according to the shear strength test method of Korean Standard. As a result of the shear test, the F-type piles which are produced without shear reinforcement occurred abrupt horizontal cracks after flexural and inclined shear cracks occurred. On the contrary, the FT-type piles which are produced with shear reinforcement exhibited stable flexural and inclined shear cracks uniformly over the entire pile without abrupt horizontal cracks. Furthermore, the maximum load of the large diameter composite PHC pile improved to 2.9 times in the F series, and more than 3.3 times in the FT series compared to the conventional PHC pile. This result indicated that FT-type piles had excellent composite behavior due to the shear reinforcement and effectively prevented the unstable growth of inclined shear cracks.

This research is an application of SHCC (Strain harding Cementitious Composite) in concrete shear wall system in order to improve the structural performance of conventional shear walls. Based on experimental loading results, it was observed that the developed SHCC shear walls showed improved strength as well as enhancements in controlling of bending and shear cracks.

In this study, experiment and analysis of high-strength bolt connection under shear fatigue loading was conducted to evaluate reduction of axial force of bolt. Three type of bolt size and initial axial force were applied to specimens. As a results, it was observed that the reduction ratio of axial force, and that would be used to additional parametric study.

In this study, MR(Magneto-Rheological) Grease fluid was developed for compensating the settling phenomena of MR(Magneto-Rheological) fluid which is widely used in semi-active control system. In order to characterize the settling phenomena of the MRG fluid, the experimental comparison was conducted. The control performance assessment of the MRG fluid was also evaluated. As a result, it was verified that the MRG fluid have the sufficient performances to use as a material for semi-active control device.

The purpose of this study is to establish a reasonable analytical method for the estimation of overall behavior characteristic from cracking to yielding of rebar and crushing of concrete and seismic performance of reinforced concrete shear wall with high-strength reinforcing bar. A total of 8 specimens of reinforced concrete walls which have constant aspect ratio and a variety of variables such as reinforcement ratio, reinforcement yielding strength, reinforcement details, concrete design strength, section shape and whether lateral restraint hoop were selected and the analysis was performed by using a non-linear finite element analysis program (RCAHEST) applying the proposed constitutive equation by the authors. The mean and coefficient of variation for maximum load from the experiment and analysis results was predicted 1.04 and 8%. The mean and coefficient of variation for displacement corresponding maximum load from the experiment and analysis results was predicted 1.17 and 19% respectively. The analytical results were predicted relatively well the fracture mode and the overall behavior until fracture for all specimens. These results are expected to be used as basic data for application of high-strength reinforcing bar to design codes in the future.

This study was made to examine the motion characteristics according to the reinforcement of the reinforcement length and stiffener reinforcement for shear reinforcement to the foundation structure reinforced with shear reinforcement steel plate. Experimental study was made after specimen was installed on the ground as the same as in the practical site. Reinforcement lengths of the steel for shear reinforcement are divided into 1,000 mm, 1,200 mm and 1,400 mm in the specimen and as for reinforcement method of the stiffener, 4 stiffeners with interval of 100mm reinforced with the same materials as the shear reinforcement were manufactured for the experiment. Considering result of the experiment, it is expressed that no effect of the stiffener reinforcement was found and regarding the reinforcement length of shear reinforcement material the crossed point of the two converted lines of the value that the shear force is expressed in the bearing power in the expanded dangerous section and the value that the shear capacity receivable by the reinforcement materials in the dangerous section is proposed as effective reinforcement length.

In this study, experiment and analysis of high-strength bolt connection under shear fatigue loading was conducted to evaluate reduction of axial force of bolt. Three type of bolt size and initial axial force were applied to specimens. As a results, it was observed that the reduction ratio of axial force, and that would be used to additional parametric study.

In this study, MR(Magneto-Rheological) Grease fluid was developed for compensating the settling phenomena of MR(Magneto-Rheological) fluid which is widely used in semi-active control system. In order to characterize the settling phenomena of the MRG fluid, the experimental comparison was conducted. The control performance assessment of the MRG fluid was also evaluated. As a result, it was verified that the MRG fluid have the sufficient performances to use as a material for semi-active control device.

This study has been suggested a model for the in-plane shear behavior of High-Performance Cement-free Fiber Composite Panels under biaxial stress states. The analytical model is verified by comparison of the analytical results with the experimental results for biaxial shaer test of Cement-free Fiber Composite Panels.

This study is, when we pour the concrete, doing bonding shear performance evaluation to search the influence about an adhesive interface by a generated cold joint with a retardation time. In conclusion, this experiment shows that the higher a compressive strength of the concrete is, the higher a reduction ratio of the bonding shear strength is, and the instance of a none agitation and a compaction with 15 minutes of a retardation time are the lowest influence in a whole of the results; each of the reduction ratio of the bonding shear strength is approximately 4.5%.

The capacity of post-installed anchor used in joining of new and old concretes structures is dominated by shear force of steels. Thus, too many anchors are required to demonstrate the reinforcement effects. In this study, a new ring anchor with high-shear resistance capacity is presented. This study evaluated that shear capacity by concrete strength and beam width through nonlinear analysis.

The purpose of this study is to apply performance-based seismic design guideline to high-rise shear wall building. According to PEER TBI Guideline, the building is evaluated whether it satisfies the performance objectives which is to be capable of elastic response under Service Level shaking having a return period of 43years and to withstand Maximum Considered Earthquake shaking with prevention collapse.

Recently, studies of eco-friendly construction materials have been increased. For this reason, this paper presents the material properties of steel fiber reinforced slag concrete. Direct shear, flexural, and CMOD tests were conducted to determine the shear and flexural contribution of steel fiber.

중공슬래브는 슬래브의 자중을 감소시킴으로써 콘크리트 하중을 제어하여 수직 구조 부재 하중 및 지진 하중의 양을 감소시키는 바닥구조시스템이다. 중공슬래브는 슬래브의 자중을 획기적으로 줄일 수 있지만 슬래브 내부의 중공부로 인하여 휨 및 전단강도가 감소하기 때문에 구조 성능의 예측이 매우 중요하다. 중공슬래브에 관한 국내외의 많은 연구에도 불구하고 일방향 중공슬래브의 전단보강에 따른 전단강도에 관한 연구는 많이 이루어지지 않고 있다. 따라서 본 연구에서는 전단보강 유무에 따른 일방향 중공슬래브의 파괴양상 분석과 산정식의 전단강도와 실험값의 전단강도의 비교를 통하여 일방향 중공슬래브의 전단보강의 필요성에 대해 검증하고자 한다.