Correlations between in-flight particle, splat and coating microstructure of thermally sprayed Ni20Cr were investigated. Flame spray and arc spray systems were employed for spraying Ni20Cr powder and Ni20Cr wire, respectively. The results showed that the arc spray process produced a broader size distribution for both in-flight particles and splats compared to flame process. Flower-like splat morphology was obtained from the arc spray whereas a pancake-like splat was obtained by flame spray. Ni20Cr coating sprayed by arc process had a denser microstructure, lower porosity and better adhesion at the interface.

For attaining optimum fatigue resistance of PM steels, high density levels are necessary. In this work, sintered steels Fe-1.5%Mo-0.6%C and Fe-1.5%Cr-0.2%Mo-0.6%C were produced with density levels of 7.1 to . Ultrasonic fatigue testing with 20 kHz was performed in push-pull mode up to 10E9 cycles. It was shown that the fatigue endurance strength is strongly improved by higher density levels, but also higher sintering temperatures are beneficial. The Cr-Mo steels proved to be superior to the plain Mo alloyed, due to a more favourable as-sintered matrix microstructure.

Crack initiation and short crack propagation was studied on the polished notched surfaces of Cr-Mo prealloy sintered steels with 7.35 sintered density. An ultrasonic resonance test system operating in push-pull mode at 20 kHz and R=-1 was used. It showed that crack initiation took place in several places, small cracks growing oriented to the local pore structure rather than to stress orientation. Their growth rate is markedly higher than the corresponding one of long cracks. Finally, several microcracks join to form a dominant crack.

Mechanical alloying using high-energy ball mill and subsequent spark plasma sintering (SPS) process was applied to Al-Fe-Cr and Al-Fe-Mo powder mixture to investigate effects of Cr and Mo addition on thermal stability of Al-Fe, and thereby to enhance its thermal stability up to . Various analytical techniques including micro-Vickers hardness test, SEM, TEM, X-ray diffractometry and corrosion test were carried out. It was found that addition of Cr and Mo to Al-Fe system played a role of grain growth inhibitor of matrix Al and some precipitates such as during SPS and subsequent heat treatment. The inhibition of grain growth resulted in increased Vickers hardness and thermal stability up to comparing to those of Al-Fe alloy system.

The uniquely large dimensions of Giant radio galaxies (GRGs) make it possible to probe for stringent limits on total energy content, Faraday rotation, Alfven speeds, particle transport and radiation loss times. All of these quantities are more stringently limited or specified for GRG's than in more 'normal' FRII radio sources. I discuss how both global and detailed analyses of GRG's lead to constraints on the CR electron acceleration mechanisms in GRG's and by extension in all FRII radio sources. The properties of GRG's appear to rule out large scale Fermi-type shock acceleration. The plasma parameters in these systems set up conditions that are favorable for magnetic reconnection, or some other very efficient process of conversion of magnetic to particle energy. We conclude that whatever mechanism operates in GRG's is probably the primary extragalactic CR acceleration mechanism in the Universe.

조명의 량에 따라 눈의 시감효율은 추상체와 간상체에 의해 파장에 따라 2 개의 함 수로 이루어진다. 렌즈를 투과한 광의 세기는 흡수 파장에 의존하고， 최종 비시감도 의 추정방법은 시감도와 렌즈의 투과율 세기의 곱으로 표현된다. 렌즈의 시감도 평가 방볍은 CIE의 스펙트럼 함수 적분 값인 면적 (So) 과 렌즈의 투과율 스펙트럼에 따른 분광 최종 비시감도의 함수 적분 값인 면적 (SI) 의 비로 표현할 수 있다 기ω 써… 시 시 R 리 때 %ι 一때 마씨 ”llJτ|4 -- 〔이휴 = Qμ 분광 비시감도(ß)값은 Yellow, Pink, Blue 및 Green 캉라 렌즈에서 각각 159.28, 123.60, 106.07 빚 58.60 값을 갖는다.

수경 재배된 케냐프의 중금속 축적량 및 제거량을 파악하고 서로의 관계를 도출하기 위하여 Cd, Cu, Cr, Ni 및 Zn이 포함된 반응조에 노출시켰다. 대상식물의 최적성장을 위한 pH, DO, 전도도 및 영양염의 농도조절은 액체비료를 이용하여 조정하였다. 8일의 수리학적 체류시간을 적용했을 때 Cr, Cd, Cu, Ni 및 Zn의 제거율은 각각 90.5%, 80.5%, 66.1%, 71.1% 및 79.4%였고 그 농도는 각각 2.34에서 0.54 mg