From the test results, it was found that the compressive strength and the resistance of chloride ion penetration were evaluated the slag content of the concrete for bridge pavement. Compressive strength test results showed that initial strength was decreased as slag replacement ratio increased. The chlorine ion penetration performance increased with increasing strength.

The effect of loading on chloride penetration into concrete is evaluated in this study. It is found that the chloride pene- tration rates for OPC concrete and blast furnace slag BFS concrete under the tensile stress were increased by 29% and 77%, respectively. The diffusion coefficient of FA and BFS concrete was lower than that of conventional concrete without BFS, no loads and stress states. Under tensile stress, the diffusion coefficient for FA and BFS, plain concrete showed higher values with increasing stress. The influence of specific surface area on the diffusion coefficient was investigated. As a result, the larger the specific surface areas of BFS are the lower diffusion coefficients. This tendency was more pronounced under the high stress conditions. The chloride penetration depth was distributed uni- formly when no stress was applied. However, in the case of tensile loading, the diffusion depth was not distributed uni- formly, and showed prominent characteristics. This result indicates that analysis using average values of chloride pene- tration depth is not proper under load conditions.

The chloride penetration characteristics of concrete exposed to the marine environment were evaluated by chloride migration coefficient and the surface chloride content, and characteristics of the marine environment such as spray zone and tidal zone are considered. 요

From the test results, it was found that the compressive strength and the resistance of chloride ion penetration were evaluated the slag content of the concrete for bridge pavement. Compressive strength test results showed that initial strength was decreased as slag replacement ratio increased. The chlorine ion penetration performance increased with increasing strength.

This study was carried out to investigate the effect of no-tillage on sequential cropping supported from recycling of first crop ridge on the growth of pepper plant and physical properties of soil under green house condition.1. Degree of crack on soil by tillage and no-tillageSoil cracks found in ridge and not found in row. At five months of tillage, crack number and crack length in length ridge were 3 and 37~51 cm in tillage. Maximum width and maximum depth in length ridge were 30 mm and 15.3cm in tillage. Crack number and crack length in width ridge were 7.5 and 7~28 cm in tillage. Maximum width and maximum depth in width ridge were 29 mm and 15.3 cm in tillage. At a year of no-tillage, crack number and crack length in length ridge were 1.0 and 140~200 cm in tillage. Maximum width and maximum depth in length ridge were 18 mm and 30 cm in a year of no-tillage. Crack number and crack length in width ridge were 11 and 6~22 cm in a year of no-tillage. Maximum width and maximum depth in width ridge were 22 mm and 18.5 cm in a year of no-tillage. Soil crack was not found at 2 years of no-tillage in sandy Jungdong series (jd) soil. Soil crack was found at 7 years of no-tillage in clayish Jisan series (ji) soil.2. Penetration resistance on soilPenetration resistance was increased significantly at no-tillage in Jungdong series (jd). Depth of cultivation layer was extended at no-tillage soil compared with tillage soil. Penetration resistance of plow pan was decreased at 1 year of no-tillage compared with than tillage soil. Penetration resistance was linearly increased with increasing soil depth at tillage in Jisan series (ji). Penetration resistance on top soil was remarkably increased and then maintained continuously at no-tillage soil.3. Drainage and moisture content of soilMoisture content of ridge in top soil was not significant difference at both tillage and no-tillage. Moisture content of ridge in 20 cm soil was 14% at no-tillage soil and 25% at tillage soil.4. Change of capacity to retain water in soilCapacity to retain water in top soil was not significant difference at 1 bar both tillage and no-tillage. Capacity to retain water in soil was slightly higher tendency in 1 year and 2 years of no-tillage soil than tillage soil. Capacity to retain water in soil was increased at 15 bar both tillage and no-tillage. Capacity to retain water in subsoil was slightly higher tendency at 1 bar and 3 bar in 2 years of no-tillage than tillage soil and a year of no-tillage soil.

The Chloride ion penetration resistance of Engineered cementitious composite using surface coating material was evaluated in this study. The test results showed that the amount of chloride ion of surface coated specimens were decreased approximately 22 % lower than that of plain specimens

Submerged concrete is subjected by water pressure. Unfortunately, there is a definite lack of well-established research to deal with the effect of permeability on chloride penetration in concrete. This study developed new modeling to predict chloride penetration in submerged concrete subjected to various water pressures.

본 논문에서는 철근 콘크리트 단면에서 동시에 진행되는 중성화와 염화물 침투에 의해 진행되는 내구성 문제에 대해 서로 다른 콘 크리트의 특성과 주변 환경의 영향을 매개변수 분석을 통해 수행하였다. 이를 위해 콘크리트의 미세 공극 구조의 변화 및 중성화와 염소이온 투 과의 상호 화학반응이 직접 지배방정식 형태로 고려된 최신 모델을 사용하여 이 복합작용의 분석을 수행하였다. 이산화탄소, 염소이온, 열 및 수분의 복합적인 이동이 직접 고려되었다. 문헌상의 실험 데이터를 분석하여 모델의 입력변수를 결정하고 계산의 편의성을 증진시켰다. 이 모 델을 상용유한요소 프로그램인 COMSOL의 사용자 모듈형태로 개발 하였다. 이 상호작용에 영향을 미치는 물-바인더비 (w/b), 골재-바인더비 (a/b), 플라이에쉬 함량, CSH 함량, 콘크리트 초기공극률 등을 정량적으로 분석하였다. 결과에 의하면, 중성화와 염소이온 침투의 상호작용은 다양한 재료 물성치에 영향을 받는다.

In this study, ends of reinforced concrete bridge damaged by the chloride attack was experimentally investigated. The effect of the lateral gradient was low. The results of this study will be used as a guideline for bridge maintenance to investigation of the characteristics of chloride penetration.

최근 인공지반녹화가 주변 생활공간의 쾌적화, 에너지 절약효과, 도시 미관의 환경개선 등의 장점을 갖고 있어 콘크리트 위에 녹화 공간 조성이 증가하고 있다. 이에 따라 건축공사 표준 시방서, 건축물 녹화 설계기준 등에서는 방수층의 수밀안정성 확보를 위해 일정 품질 이 상의 방근층 설치를 규정하고 있으나, 실제 우리나라의 많은 현장은 방수층 위에 누름콘크리트 타설 후 인공녹화를 시행하고 있는 실정이다. 이에 본 연구에서는 방근층을 시공하지 않은 현장을 대상으로 지표를 설정하였으며, 누름콘크리트의 균열에 따른 식물의 뿌리가 균열부로 침 입 및 관통하여 누름콘크리트 하단부의 아스팔트 방수시트에 미치는 영향을 평가하였다.

In this study, chloride penetration of calcium leached concrete according to mineral admixture ratio were compared with OPC. From the results, it showed that chloride diffusion coefficient in calcium leached concrete were increased as calcium leaching period increase. However, the chloride diffusion coefficient of BFS case showed the better resistance than Fly Ash case. And, the distribution of chloride diffusion coefficient was significantly changed by calcium leaching period.

콘크리트 표면의 상태에 따라 염화물은 증가 또는 감소하게 되며 이는 철근부식 및 내구수명에 매우 중요한 인자가 된다. 콘크리트의 내구성 저하를 방지하기 위해 표면함침과 같이 많은 표면강화 기술이 개발되었으나 이중 콘크리트 구조와 확산계수의 시간의존성을 고려한 염화물 해석방법은 매우 제한적이다. 본 논문에서는 표면 강화된 이중구조 콘크리트에 대해 시간의존성 확산계수를 도입하여 염화물 해석기법을 제안하였으며, 역해석을 통하여 기존의 실험결과와 비교하였다. 2년간 비말대, 해수중, 조석대 상태에 노출된 표면 함침된 콘크리트 시편에 대해 표면염화물량과 확산계수를 도출하고 Life-365에서 제안한 확산계수 식과 비교 분석하였다. 시간의존성을 고려한 결과 비말대 시편의 오차는 0.28에서 0.20 수준으로, 조석대 시편은 0.29에서 0.11 수준으로, 해수중에서는 0.54에서 0.40 수준으로 오차가 감소함을 알 수 있었다. 또한 Life365에서 사용되는 확산계수식을 사용할 경우, 과다한 확산계수로 인해 상대오차가 커지고 높은 침투깊이(e)와 낮은 확산계수비(D1/D2)를 필요로 함을 알 수 있다.

This study is the study of the chlorine ion penetration resistance of the study of the natural durability enhancement materials that can reduce cracking of the concrete. The durability enhancement materials of natural were substituted 10%, 20%, 30% of cement, the results were confirmed excellent chlorine ion penetration resistance as the more increasing the natural durability enhancement.

As a result of strength test on FA and BFS, FA concrete showed higher increase of strength compared to OPC, when FA4000 and FA5000 were mixed 30%, respectively. For BFS concrete, those mixed with 30% and 50% of BFS8000, respectively, showed higher or equivalent strength compare to OPC. As a result of test of chloride penetration on FA and BFS, diffusion coefficients of concrete mixed with 30% FA4000 and FA5000, respectively, showed to restrain average 6.5% of diffusion coefficient compared to OPC. And in case of BFS concrete, those mixed with BFS6000 and BFS8000, restrained diffusion of chloride ions 253% and 336%, respectively, compared to OPC. Therefore, Mixing 50% of BFS was most efficient in order to maximize restraint of chloride penetration according to metathesis of large amount.

원위치에서 공학적 정수의 산정을 위하여 지반특성에 따라 표준관입실험(SPT), 동적 콘관입실험(DCPT), 정적 콘관입실험(SCPT) 등 다양한 실험방법들이 적용되어 왔다. SPT 및 DCPT의 경우 실험방법이 간단한 반면 결과의 신뢰도는 낮으며, SCPT의 경우 실험결과의 신뢰성은 높으나, 대상현장에 따라 관입장비의 적용에 한계가 있어 왔다. 본 연구에서는 계장화된 동적 콘관입기(Instrumented Dynamic Cone Penetrometer, 이하 IDCP)를 개발하여 CPT의 적용이 어려운 현장의 지반특성을 파악하고자 하였다. IDCP는 원추형 선단부와 연결롯드, 그리고 두부로 구성되어 있으며, 선단부 및 두부에는 변형률계와 가속도계를 설치함으로써, 각 부분에서의 힘, 속도, 변위, 그리고 전달된 에너지를 측정할 수 있도록 하였다. IDCP의 관입을 위한 해머 및 관입장비는 대상현장에 따라 SPT 및 DCPT와 동일한 방식으로 적용되었다. IDCP를 이용한 실내 및 현장적용 실험결과, 동적관입에 따라 측정된 선단의 저항력은 두부로부터 선단으로 전달된 에너지의 손실에 대한 영향없이 대상지반의 강도분포를 우수하게 나타내고 있음을 보여주었다. 본 논문에서 개발된 IDCP는 기존 실험법의 한계점을 보완함으로써, 현장적용성이 우수하고, 정량적인 강도분포의 도출이 가능한 지반조사장비로 활용될 수 있을 것으로 예상된다.

This study examined dynamic and characteristics and chloride penetration of concrete mixed with large amount of FA and BFS, which are considered for positive application to construction fields with purpose of long-tern durability of concrete structures. As a result of strength test on FA and BFS, FA concrete showed higher increase of strength compared to OPC, when FA4000 and FA5000 were mixed 30%, respectively. For BFS concrete, those mixed with 30% and 50% of BFS8000, respectively, showed higher or equivalent strength compare to OPC. As a result of test of chloride penetration on FA and BFS, diffusion coefficients of concrete mixed with 30% FA4000 and FA5000, respectively, showed to restrain average 6.5% of diffusion coefficient compared to OPC. And in case of BFS concrete, those mixed with BFS6000 and BFS8000, restrained diffusion of chloride ions 253% and 336%, respectively, compared to OPC. Therefore, Mixing 50% of BFS was most efficient in order to maximize restraint of chloride penetration according to metathesis of large amount. For relation between compression strength and diffusion coefficient of FA and BFS concrete, as strength increased, diffusion coefficient decreased. In this study, when mixing FA and BFS to concrete for long-run durability and restraint against chloride penetration, for FA, mixing it to concrete with less or equivalent 30% of replacement rate was most efficient. And for BFS, as fineness was higher and mixing it to concrete with less or equivalent 50% of replacement rate, there were results of higher strength compared to OPC and more efficient restraint of chloride ions.

콘크리트용 무기계 방수제는 내부 막을 형성하지 않기 때문에 무기계 방수제의 침투깊이 정량적으로 평가하기 어렵다. 그러나 무기계 방수제의 침투깊이 평가는 일관된 침투효율을 확보하는데 있어서 매우 중요한 평가지표 중 하나이다. 따라서 본 논문에서는 콘크리트용 무기계 방수제의 침투깊이 측정방법을 고안하였으며, 고안된 침투깊이 측정방법을 통하여 기존 무기계 방수제의 침투깊이를 평가하였다. 실험결과 고안된 무기계 방수제의 침투깊이 측정방법을 통하여 평가된 침투깊이는 90% 이상의 신뢰성이 있는 것으로 나타났다.

In the attempt to predict life time in a concrete, some modified pore structure in concrete was taken accounted to a diffusion modelling. As a result, total length coming from MIP and LTM methods was somewhat inconsistent with corresponding value from profiling. The reason was assumed that overestimated surface chloride content and penetration length with unaccurate determination of continuous pores.

Traditionally main driving force of chloride penetration in concrete have been regarded as diffusion, however, large construction such as tunnel elements and foundations for bridges can be placed on large sea water depths where the water pressure is fairly different from the pressure in the splash zone. Moreover, hydrostatic pressure increases in proportional to measured depth from the surface of water because of the increasing weight of water exerting downward force from above. In this study, new experiment method to estimate chloride penetration of concrete under water pressure is introduced. When the life length for such a concrete structure on a large sea water depth is estimated using the normally used models, the concrete test specimen

현재, 기능성 화장품 성분의 피부흡수에 대한 연구 보고가 부족하며, 인체에서의 in vivo 피부 흡수는 거의 보고된 바 없다. 본 연구에서는 in vivo 라만 분광 피부 측정기를 이용하여 대표적 기능성 화장품 8종 성분의 인체 표피 투과 데이터를 수집 및 분석하고, 이를 in vitro 결과와 비교하여 주요 성분의 피부 흡수 자료를 확보하였다. 그리고 본 연구에 사용한 성분의 피부 투과도 측정한 결과를 보면, in vitro 평가에서 ascorbyl-2-glucoside, retinol, retinyl palmitate, 그리고 kojic acid가 우수한 피부 투과율을 보였으며, in vivo 평가에서는 retinol, vitamin C, 그리고 arbutin 이 우수한 것으로 나타났다. 반면, In vitro 평가와 in vivo 평가에서 가장 우수한 투과율을 보인 성분은 각각 ascorbyl-2-glucoside와 retinol이었다. 이러한 차이점은 in vitro평가의 경우 무모생쥐 모델의 피부를 모두 관통하는 물질을 평가하였고, 라만 분광 피부 측정기의 경우는 표피의 각질층을 평가하였으므로 물질의 특성에 따라서 표피 및 진피층의 영향에 민감할 수 있기 때문인 것으로 판단된다. 그리고 대부분 물질의 투과 장벽은 각질층이므로 각질층에서 물질 이동을 살펴보는 것이 의미 있다고 생각된다. 결론적으로, 본 연구에서는 라만 분광 피부 측정기를 이용하여 대표적 기능성 화장품 성분의 피부 흡수에대한 기초적인 자료를 확보하였으며, 따라서 이들 자료는 추후 많은 연구에 활용될 수 있을 것으로 생각된다.