The natural barrier system surrounding the geological repository for high-level radioactive waste plays a crucial role in preventing or delaying the leakage of radionuclides. Therefore, the natural barrier should ensure low permeability to prevent groundwater flow into the engineered barrier system throughout the repository’s lifetime. Crystalline rock, considered as the host rock for the geological repository in Korea, exhibits low intact rock permeability, but the crystalline rock often contains the multiple discontinuities due to its high brittleness that can allow the unexpected fluid flow. Therefore, the long-term hydraulic behavior of the discontinuity should be characterized while considering additional thermal, mechanical, and chemical effects. In comparison to thermal, hydraulic, and mechanical processes, the chemical processes on the discontinuities progress relatively slowly, resulting in limited researches to include these chemical processes. This research introduces mechanisms the involving coupled thermal-hydraulic-mechanicalchemical processes focusing on the rough fracture surfaces and asperities. The chemically-induced changes in mechanical and hydraulic properties are described based on pressure solution and precipitation concepts. A comprehensive review of laboratory tests, field tests, and numerical simulations is conducted related to the chemically-induced coupled processes in fractured rock. Laboratory tests, in particular, concentrate on microscopic changes in fracture asperities induced by pressure solution to analyze chemically-induced aperture changes. The TOUGHREACT, an integral finite difference method program for thermal-hydraulic-chemical simulations, is generally employed to model the chemical response of pressure solution and precipitation on fracture surfaces. The TOUGHREACT includes a module to describe effective porosity and permeability changes based on the modified cubic law, so the real-time change of the fracture permeability can be reflected during the flow simulation. Considering the coupled thermal-hydraulic-mechanicalchemical processes of discontinuity, it becomes evident that the chemical processes under repository conditions (long-term, high temperature, and high pressure) can disturb the hydraulic performance of the natural barrier, so further research is required to characterize the chemically-induced coupled processes for assessing the long-term performance of the natural barrier system.

The compacted bentonite buffer is a key component of the engineered barrier system in deep geological repositories for high-level radioactive waste disposal. Groundwater infiltration into the deep geological repository leads to the saturation of the bentonite buffer. Bentonite saturation results in bentonite swelling, gelation and intrusion into the nearby rock discontinuities within the excavation damaged zone of the adjacent rock mass. Groundwater flow can result in the erosion and transport of bentonite colloids, resulting in bentonite mass loss which can negatively impact the long-term integrity and safety of the overall engineered barrier system. The hydro -mechanicalchemical interactions between the buffer, surrounding host rock and groundwater influence the erosion characteristics of the bentonite buffer. Hence, assessing the critical hydro-mechanicalchemical factors that negatively affect bentonite erosion is crucial for the safety design of the deep geological repository. In this study, the effects of initial bentonite density, aperture, discontinuity angle and groundwater chemistry on the erosion characteristics of Bentonil WRK are investigated via bentonite extrusion and artificial fracture experiments. Both experiments examine bentonite swelling and intrusion into simulated rock discontinuities; cylindrical holes for bentonite extrusion experiments and plane surfaces for artificial fracture experiments. Compacted bentonite blocks and bentonite pellets are manufactured using a compaction press and granulation compactor respectively and installed in the transparent extrusion cells and artificial fracture cells. The reference test condition is set to be 1.6 g/cm3 dry density and saturation using distilled water. After distilled water or solution injection, the axial and radial expansion of the bentonite specimens into the simulated rock discontinuities are monitored for one month under free swelling conditions with no groundwater flow. Subsequent flow tests are conducted using the artificial fracture cell to determine the critical flow rate for bentonite erosion. The intrusion and erosion characteristics are modelled using a modified hydro-mechanicalchemical coupled dynamic bentonite diffusion model and a fluid-based hydro-mechanical penetration model.

Molten salt reactor (MSR) uses fluoride or chloride based molten salt as a coolant of the system, and fuel materials are dissolved in the molten salt, therefore it can be act as both coolant and nuclear fuel. A few issues have arisen from early-stage research and development program of MSR from Oak Ridge National Laboratory, including corrosion of structural materials and fission product management. For investigating the effect of additives on corrosion of structural materials, Mg(OH)2 and MgCl2*6H2O are added into the NaCl-MgCl2 eutectic salt. Prepared chloride salt is injected into the autoclave in the glove box, as well as corrosion coupons for candidate structural materials for molten chloride salt reactor, SS316, Alloy 600, and C-276 are also prepared. The temperature is set as 700°C. After 500 h corrosion experiment, the samples are taken out from the autoclave, and they are analyzed with scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). SS316 samples show weight loss with all salt conditions, while Alloy 600 and C-276 show weight gain after the corrosion experiment.

Globally, the operation of nuclear power plants results in the production of a tremendous quantity of spent nuclear fuel. The methods for handling spent nuclear fuel can be categorized into three: storage, direct disposal and recycling. A technology designed to recycle accumulated spent nuclear fuel is pyropocessing. In pyroprocessing, various fission products (FPs) such as C-14, H-3, I-129 and Cs-137 are generated. Among these FPs, technetium (Tc-99) is a gaseous nuclear isotope with a long half-life and high mobility in the form of TcO4 - in aqueous solutions, making it essential to capture strictly in order to prevent radioactive contamination of the environment. In previous studies, ion-exchange or adsorption using MOFs (Metal Organic Frameworks) have been used to remove Tc-99. These methods, however, involve separation in aqueous solutions, not in the gaseous state. In this study, we developed a CaO-based adsorbent for capturing Re as a surrogate for radioactive Tc-99. Isopropyl alcohol (IPA) was employed as a pore-forming agent during the preparation of the adsorbents, and its effects on characteristics and adsorption performance were investigated. The size of the pores were analyzed from nitrogen (N2) adsorption isotherm analysis and mercury (Hg) intrusion curves. As a result, it was confirmed that the addition of IPA had a significant impact on the formation of macro-pores. Furthermore, this macroporous structure was found to enhance the adsorption performance of Re.

Zircaloy-4 is utillzed in nuclear fuel rod cladding due to its strength and corrosion resistance. However, it can undergo deformation over time, known as creep, which poses a safety risk in reactors. Furthermore, hydrogen absorption during reactor operation can alter its properties and affect creep rates. Previous research suggests a trend in which hydrogen concentration corelates unidirectionally with creep rates, either increasing or decreasing as the concentration rises. This trend can also be observed in EPRI’s creep model, EDF-CEA Model-3. However, recent literature has suggested that creep behavior may vary depending on the state of hydrogen presence. Therefore, it has become evident that creep behavior can be influenced not only by hydrogen concentration but also by the state of hydrogen presence, whether it is in a solid solution state or precipitated as hydrides. Our study aimed to compare creep behavior in specimens with hydrogen concentrations below and above solubility limits. We fabricated Zircaloy-4 plate specimens with varying hydrogen concentrations and conducted creep tests. The results revealed that specimens below the solubility limit exhibited decreasing creep rates as hydrogen concentration increased, while those above the limit displayed increasing creep rates. This investigation confirms that the state of hydrogen presence significantly impacts creep behavior within Zircaloy-4 cladding. As part of our additional research plans, we intend to conduct creep tests on the material based on its orientation, whether it is in the rolling direction (RD) or the transverse direction (TD). We also plan to perform creep tests on ring specimens. Additionally, for the ring specimens, we aim to evaluate how creep behavior differs between the cold-worked stress-relieved (CWSR) condition and the recrystallized annealed (RXA) condition achieved through high-temperature heat treatment.

This study analyzes the seismic response of traffic light poles, considering soil-foundation effects through nonlinear static and time history analyses. Two poles are investigated, uni-directional and bi-directional, each with 9 m mast arms. Finite element models incorporate the poles, soil, and concrete foundations for analysis. Results show that the initial stiffness of the traffic light poles decreases by approximately 38% due to soil effects, and the drift ratio at which their nonlinear behavior occurs is 77% of scenarios without considering soil effects. The maximum acceleration response increases by about 82% for uni-directional poles and 73% for bi-directional poles, while displacement response increases by approximately 10% for uni-directional and 16% for bi-directional poles when considering soil-foundation effects. Additionally, increasing ground motion intensity reduces soil restraints, making significant rotational displacement the dominant response mechanism over flexural displacement for the traffic light poles. These findings underscore the importance of considering soil-foundation interactions in analyzing the seismic behavior of traffic light poles and provide valuable insights to enhance their seismic resilience and safety.

비건 화장품 시장이 급성장하는 가운데, 소비자의 환경 및 윤리적 가치 지향이 강화되고 있지 만, 이에 관한 연구는 제한적이다. 본 연구는 비건 화장품의 구매의도에 영향을 주는 소비자의 가치 인식과 환경 동기, 그리고 지각된 장벽 간의 관계를 분석하였다. 300명의 비건화장품 사용 경험이 있는 여성을 대 상으로 PLS-SEM 분석을 진행한 결과, 금전적 가치, 사회적 가치, 브랜드 가치, 감정적 가치, 품질 가치, 그리고 환경 지식이 구매의도에 큰 영향을 주는 것으로 확인되었다. 조절 효과 분석에서는 이미지 장벽과 가치 장벽이 중요한 요인으로 나타났다. 중요도-성능 지도 분석을 통해, 감정적 가치가 비건 화장품의 구 매의도를 강화하는 전략적 결정에 중요한 핵심 요인으로 드러났다. 본 연구는 비건 화장품 시장의 경쟁력 강화와 지속 가능한 소비 태도 활성화에 대한 이론적 및 실무적 기여를 제공한다.

본 연구의 목적은 시각정보로 양안시와 단안시 사용 시 Y-Balance Test(YBT) 수행이 YBT 절 대도달거리, 수행점수와 압력중심 변인을 통하여 동적균형에 미치는 영향을 알아보고자 하였다. 연구의 대 상자로 20-30대 성인 18명(연령: 23.17±1.72 년, 신장: 172.46±9.84 cm, 체중: 73.39±11.44 kg 다리 길이: 88.89±5.69 cm)이 연구에 참여하였다. 양안 및 단안 사용으로 동적 균형 측정을 위하여 YBT를 통 하여 절대도달거리, 종합점수, COP 변인들을 좌우발에서 측정하여 결과를 도출하였다. 연구결과로 YBT 시 후외측, 후내측, 종합점수에서 단안 차단(좌우 눈 차단)이 양안 사용보다 절대도달거리 및 종합점수가 높게 나타났다. COP 결과로, 전방 및 후내측 도달 시 차이가 나타나지 않았지만, 후외측 도달 시 전후 COP 속도에서 왼발은 단안 차단이 양안시 보다 전후 COP 속도가 느리게 나타났고, COP 속도에서 왼발 은 단안 차단이 양안시 보다 COP 속도가 느리게 나타났다.

호장은 마디풀과에 속하는 다년초로 우리나라를 포함한 동아시아에서 잘 자생한다. 호장근은 호장의 뿌리로 항염증과 진경제로 사용되어 왔으며 유효성분으로 emodin을 포함하고 있다. 피부의 표피는 자극, 해로운 물질을 차단하고 수분 증발을 방지함으로써 체내를 보호하는 중요한 역할을 한다. 본 연구에 서는 호장근과 그 유효성분인 emodin이 피부 장벽과 보습능에 미치는 영향에 대해 평가하고자 하였다. 먼 저 호장근은 ABTS+ radicals을 우수하게 제거함으로써 항산화 효능이 뛰어남을 확인하였다. 다음으로, 실 시간 중합연쇄효소반응을 통해 각질형성세포의 분화에 중요한 역할을 하는 filaggrin의 유전자 발현을 비교 한 결과, 호장근과 emodin에 의해 농도-의존적으로 filaggrin mRNA 발현이 증가하였다. 또한, 호장근과 emodin은 히알루론산 합성에 중요한 역할을 하는 HAS-2 mRNA 발현을 유의하게 증가시키는 것으로 나 타났다. 종합적으로, emodin을 유효성분으로 포함하는 호장근은 피부 장벽 강화와 보습능 증강을 위한 기 능성 화장품 소재로서 활용될 수 있을 것으로 기대된다.

본 연구는 청년세대의 상대적 박탈이 사회적 이슈로 떠오르고 있음에 도 불구하고 관련된 사회적 논의와 학문적 연구가 제대로 이루어지지 못 하고 있다는 비판에 기반하고 있다. 이에 20~30대 청년을 대상으로 온라 인 설문조사로 데이터를 수집하여 위계적 회귀분석방법으로 청년세대의 상대적 박탈감에 영향을 주는 요인을 파악하였다. 연구 결과 및 논의를 다음과 같이 제시하고자 한다. 첫째, 한국 사회의 청년세대는 분배의 불 공정성에 기반해 상대적 박탈감을 체감하는 것으로 나타났다. 사회적 환 경과 맞물려 더욱 두드러지게 나타나는 분배공정성의 특성상, 공정하지 못한 분배구조로 인해 피해를 받고 있다는 청년세대의 상대적 박탈감 인 식은 일면 당연한 모습으로 해석된다. 둘째, 평등에 대한 인식이 분배공 정성과 결합한 상호작용의 효과로 상대적 박탈감을 낮추는 요인으로 작 용함을 알 수 있었다. 이와 같은 결과는 사회적 평등이 공정성을 강화시 키는 요소로 작용할 수 있음을 보여줌과 동시에 공정성의 다차원적 요인 에 평등이 포함될 수 있음을 보여주는 것이다. 결론적으로, 사회적 자원 에 대한 접근의 평등과 공정함을 제도로 보장하고 공평한 자원 분배 정 책 등이 최우선의 청년정책으로 마련되어져야 할 것이다.

본 연구는 성인 학습자의 노후 준비도가 노인부양의식에 미치는 영향요인을 파악하기 위함이며, 2023년 4월 13일부터 6월 29일까지 K 사이버대학교 성인 학습자 147명을 분석대상으로 삼았다. 수집된 자료는 분산분석, 단별량 및 다 별량 회귀분석, 상관관계 분석을 사용하였다. 분석결과 성인 학습자의 노후준비 도 영향요인 차이는 성별, 연령별에서 차이가 나타났고(p<0.05), 노후 준비도 에 따른 노인 부양의식 요인에 미치는 영향은 성인 학습자들의 경우 더욱 관심을 갖고 있는 것으로 나타나 통계적으로 유의한 것으로 나타났다 (P<0.05). 노후 준비도와 노인부양의식과의 상관관계에서는 결정계수 R값 은 경제적 부양요인과 정서적 부양요인(0.717), 신체적 부양요인(0.779)은 관계성이 높게 나타났다. 이는 노후준비를 어떻게 하느냐에 따라서 노인부 양의식과 노후의 삶이 영향을 미치고 있어 철저한 사전 노후준비와 긍정적 인 노인부양의식에 대한 변화 유도, 그리고 종합적이고 기초적인 유용한 자료 로 활용하는 데 함의가 있다.

본 연구는 노인을 대상으로 가족응집성과 생활만족도의 관계를 알아보 고, 가족응집성과 생활만족도의 관계에서 적극적 스트레스 대처의 매개 효과를 살펴보는 것을 목적으로 한다. 이를 위해 만 65세 이상의 노인 286명을 대상으로 경로분석과 부트스트래핑을 실시하였다. 분석결과 첫 째, 노인의 가족응집성은 적극적 스트레스 대처와 생활만족도에 통계적 으로 유의미한 영향을 미쳤다. 둘째, 노인의 적극적 스트레스 대처는 생 활만족도에 유의미하였다. 셋째, 노인의 가족응집성과 생활만족도의 관계 에서 적극적 스트레스 대처의 역할을 살펴본 결과 매개효과가 있음을 검 증하였다. 이상의 결과를 바탕으로 논의와 후속연구 제언을 하였다.

Korean melon (Cucumis melo L.) is an environment in which most farming work can affect the increase in musculoskeletal diseases, and the stems are attracted to the ground in order to grow no-heating cultivation. In this study, growth and productivity were compared according to the type of high-bed. The narrower the surface area at the bottom of the high-bed, the faster the initial growth, which was advantageous. The bed is which the height if 70 cm, the surface temperature has risen due to the increase in direct solar radiation inflow since April, requiring side light blocking to block the inflow of solar radiation. In terms of fruit quality, the 200 cm width treatment had higher fruit sugar content and better hardness than the 160 cm treatment. From April to September, the total yield was 6.8 kg/plant of treatment A, 8.7 kg/plant of treatment B, 5.8 kg/plant of treatment C, treatment B mainly 50% higher than treatment C, and 27% higher than treatment A. Therefore, the bed form suitable for Korean melon high bed is 200 cm wide, 40 cm high between the surface and the bed, and the surface of the passage between the beds is 30cm high from the ground to the bed.

High-strength low-alloy steel is one of the widely used materials in onshore and offshore plant engineering. We investigated the alloying effect of solute atoms in α-Fe based alloy using ab initio calculations. Empirical equations were used to establish the effect of alloying on the Vicker’s hardness, screw energy coefficient, and edge dislocation energy coefficient of the steel. Screw and edge energy coefficients were improved by the addition of V and Cr solute atoms. In addition, the addition of trace quantities of V, Cr, and Mn enhanced abrasion resistance. Solute atoms and contents with excellent mechanical properties were selected and their thermal conductivity and thermal expansion behavior were investigated. The addition of Cr atom is expected to form alloys with low thermal conductivity and thermal expansion coefficient. This study provides a better understanding of the state-of-the-art research in low-alloy steel and can be used to guide researchers to explore and develop α-Fe based alloys with improved properties, that can be fabricated in smart and cost-effective manners.

This study was conducted to investigate optimal conditions for cutting propagation of the strawberry cultivar “Sulhyang” through the collection methods of cuttings (runners tips), leaf number of cuttings, and cutting time. Cuttings were collected from the mother plant in the nursery bed (MP) and plants after fruit harvest (HP); the leaf number of cuttings was 0, 1, and 2, and the cutting time was at one-week intervals from June 4 to July 9. The survival rates for MP and HP cuttings were notably high, reaching 99.5% and 98.7%, respectively, but no significant difference was found. The number of roots were higher in MP cuttings, and there was no significant difference in crown and leaf growth. The fruit yields were 419.2 and 428.4 g, for MP and HP cuttings, respectively. The survival rates according to leaf number of cuttings were 98.1% and 98.3% for 1 and 2 remaining leaves, respectively, and remarkably lower at 25.3% for no remaining leaves. The root numbers were 26.0 and 26.3 for 1 and 2 remaining leaves, respectively, compared with 23.5 for no remaining leaves, with no significant differences in crown and leaf growth. The fruit yields were 424.4 and 421.5 g for 1 and 2 remaining leaves, respectively, and 396.7 g for no remaining leaves. The survival rates according to cutting time was over 97.2% in all cutting time without any difference in each treatment. The root, shoot, and crown of the nursery plant before planting showed the best growth in the cuttings on June 4 and 11, resulting in the highest fruit yields of 433.3 and 426.4 g, respectively, with the lowest yields at 384.5 g for cutting time on July 9. Both MP and HP materials proved suitable for strawberry cuttings. The optimal leaf number for cuttings was at least 1, and the optimal cutting time in Gyeongnam area was evaluated as around June 4-11.

PURPOSES : This study aims to examine actual cases of providing detour information in accidental situations such as traffic accidents and road construction through a VMS installed on national highways in metropolitan areas with alternative routes, as well as cases of simultaneously providing travel time information on parallel paths such as national and regular highways. For each case, we analyzed whether the provision of VMS traffic information leads to route changes and substantial effects. METHODS : To analyze traffic changes on the main and detour roads based on the detour information provided on traffic accidents in actual cases, the traffic volume and speed on the accident day were compared with those on the same days and at the same time of the day (regular days) based on the VDS data of the main and detour roads. Cases providing more detour information on road construction were investigated by examining three time periods: one week from construction initiation and one week before and after the construction period (regular days). The traffic volume and speed on the main road were compared based on the VDS data, and those on the detour road were compared based on data made available by private entities. Regarding the cases of simultaneously providing drivers with comparative information on travel time over parallel sections of national and regular highways, traffic situation changes in highways were analyzed in the following special traffic control periods (New Year's Day, NY Day), during which congestion is expected due to heavy traffic: before and after the provision of comparative information for 2015 New Year's Day and 2016 NY Day. RESULTS : The detour rate related to route changes based on the detour information for traffic accidents was 35%. On the detour route, the traffic volume increases as traffic from the main road is absorbed. However, the average travel speeds did not differ significantly. When further detour information regarding a road construction project was provided, the detour rate from the main road was 21%. The travel speeds were similar, except on the first day of construction. Almost no changes were observed in the first section of the detour. The speed slightly decreased in the second section but did not significantly hinder the traffic flow. When comparative traffic time information on parallel routes (national highways and expressways) was provided, the traffic volume increased to some extent after the report was provided for every case. However, the data frequency rate in the 5-min unit, which was still under the congestion speed standard (40 km/h), decreased. This indicates that traffic congestion was significantly relieved. CONCLUSIONS : Previous studies on detour rates or route changes based on VMS traffic information have focused on VMS instruments on expressways. Although their estimates were based on simulated situations, this study used actual VMS installed on national highways. In addition, this study utilizes the existing case records of national highway ITS centers, covering traffic situation monitoring, measures for accidental situations, etc., in regular times or special traffic control periods, as well as statistical data, including ITS real-time traffic information. The analysis results of this study accurately represent situations on actual roads and can be utilized to analyze future ITS operation and installation project effects.

기존의 합성 항산화제를 대체하기 위하여 천연물질 유래 항산화제인 파프리카 추출물을 돈육 패티에 이용하였다. 본 연구에서는 항산화제를 첨가하지 않은 돈육 패티(C), 합성 항산화제인 아질산염을 첨가한 돈육 패티(NC), 파프리카 추출물을 5 mg 첨가한 돈육 패티(T1), 파프리카 추출물을 10 mg 첨가한 돈육 패티(T2)를 제작하여 실험을 실시하였다. 돈육 패티는 7 ℃ 냉장 온도에서 0일 및 7일간 저장하였으며, pH, 육색, 가열 감량, 지방산패도, 및 카르보닐함량을 비교하였다. C에 비해 모든 처리구에서 낮은 pH와 가열 감량을 보였다(p < 0.05). 처리구에서 낮은 명도와 높은 적색도 값을 나타냈다. 또한 합성 항산화제인 아질산염 첨가구보다 파프리카 추출물 첨가한 돈육 패티에서 높은 적색도를 나타냈다(p < 0.05). 모든 처리구에서 저장기간이 증가할수록 카르보닐함량과 지방산패도는 증가하며, 저장 7일째 처리구에서 낮은 카르보닐함량과 지방산패도 를 보였다(p < 0.05). 특히 저장 7일째, 합성 항산화제인 아질산염을 첨가한 돈육 패티에서 가장 낮은 지방산패도를 보였다. 파프리카 추출물 또한 지방산패도를 낮추며, 파프리카 추출물 첨가량이 높을수록 더 크게 지질산화를 억제하였다. 따라서, 돈육 패티에서 파프리카 추출물을 첨가하면 돈육 패티의 산화를 억제할 수 있음을 확인했다. 또한 파프리카 추출물의 첨가량을 조절함으로써 아질산염과 유사한 항산화능을 지님을 확인하여 천연 항산화제로서의 가능성을 확인하였다.

In this study, in order to develop a method to efficiently inject essential nutrients necessary for plant growth into wood chips, which are simply used as soil covering materials in the agriculture, landscaping and horticultural industries, the atmospheric pressure dipping method and the vacuum pressure impregnating method are used to improve the plant nutrients injectability and impregnation amount were comparatively analyzed. Nutrient ingredients and 8 major heavy metal contents of wood chips injected with nutrients were analyzed, and soil covering effects were examined by covering wood chips injected with nutrients on soil. Comparing the dipping method and the vacuum pressure impregnation method, it took about 48 hours or more to inject 1,500 g or more of the nutrient aqueous solution into 1 kg of wood chips in the dipping method, but the vacuum pressure impregnation method could be impregnated in about 5 minutes. Components of the impregnated nutrients were detected in proportion to the diluted concentration. As a result of covering the wood chips developed in this study on soil, they showed weakly acidic pH, and the heat insulation and moisturizing effects during the winter season were evaluated to be superior to those of uncovered soil. In the future, wood chips impregnated with nutrients are expected to contribute to the more efficient use of waste wood resources and the long-term supply of nutrients essential for plant growth, reducing excessive use of chemical fertilizers and reducing costs.

본 연구는 수분함량과 미생물 첨가제가 알팔파 사일리지의 발효특성과 사료가치에 미치는 영향을 알아보기 위해 수행되었다. 알팔파는 개화 10% 시기에서 수확되었으며 수분 함량(M60, M50, M40 및 M30)이 60, 50, 40 및 30%일 때 각각 이용하였다. 1500g을 샘플링한 후, 증류수 10mL을 첨가한 미첨가구(NAD)와 Lactococcus lactis 와 Pediococcus pentosaceus의 혼합물을 증류수(0.1g/10mL)에 1.5 x 1010cfu/g 농도로 희석한 후 접종한 미생물 균주 첨가구(ADD)를 3개월 및 6개월 발효하였다. 수분 및 미생물 첨가제에 따른 연평균 알팔파의 조단백, 중성세제 불용성 섬유 및 산성세제 불용성 섬유에서 차이가 없었다(p>0.05). 모든 발효기간에서 pH는 ADD의 M40에서 가장 낮았다(p<0.05). NAD 처리구에서는 젖산이 M50에서 가장 높았고(p<0.05), ADD 처리군에서는 M40 시험구에서 젖산이 가장 높았다(p<0.05). NAD와 ADD의 M60은 젖산 함량이 다른 수분 함량들에 비해 가장 낮으며(p<0.05) 낙산이 유일하게 검출되었다. 미생물군집의 상대적 풍부도는 ADD 처리구의 M40과 M50에서 Homo LAB (Enterococcus, Lactiplantibacillus, Lacticaseibacillus, Lactococcus, Pediococcus)의 비율이 가장 높았고, Clostridium은 M60에서 가장 높았다.

목적 : 본 연구는 소셜네트워크서비스(Social Network Service; SNS) 이용 여부에 따른 장애인의 장애수용, 우울, 자아 존중감과 삶의 만족도를 비교하고 SNS를 이용하는 장애인의 삶의 만족도에 장애수용, 자아존중감, 우울, SNS 활용도가 어떠한 영향을 미치고 있는지 알아보고자 한다. 연구방법 : 본 연구는 한국장애인개발원의 장애인삶 3차 패널조사(2020년)를 활용하였다. SNS 이용 여부에 따른 장애인 의 장애수용, 우울, 자아존중감, 삶의 만족도를 비교하기 위해서 독립표본 t-검정을 실시하였다. SNS를 이용하는 장애 인의 삶의 만족도와 장애수용, 우울, 자아존중감, SNS 활용도의 상관관계를 분석하기 위해서 피어슨 상관분석을 실시하 였다. SNS를 이용하는 장애인의 삶의 만족도에 영향을 주는 요인을 분석하기 위해서 다중회귀분석을 실시하였다. 결과 : SNS를 이용하는 장애인이 이용하지 않은 장애인보다 장애수용, 자아존중감, 삶의 만족도는 높고 우울은 낮은 것 으로 나타났으며, SNS를 이용하는 장애인의 삶의 만족도는 장애수용, 우울, 자아존중감, SNS 활용도, 삶의 만족도와 상 관관계를 보였다. 또한, SNS를 이용하는 장애인의 삶의 만족도에 영향을 주는 요인으로는 성별, 우울, 자아존중감, SNS 활용도로 나타났다. 결론 : SNS는 장애인의 삶의 만족도에 긍정적인 영향을 미치는 것을 확인하였다. 따라서, 장애인의 삶의 만족도를 높이 기 위해 SNS의 접근성과 활용성을 높일 수 있는 중재 전략과 보조기기의 개발이 필요할 것으로 보인다.