검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 50

        3.
        2022.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Hydrogen infrastructure, for instance, such as hydrogen stations, supply chain network, is important in society of hydrogen economy. Special alloy are frequently used to prevent the hydrogen embrittlement in hydrogen vehicles, semiconductor factories and so on. Because special alloy including Monel material has high strength and high hardness, it is known as the hard-to-cut or roll material. This paper aims to investigate the characteristics and safety on bearing and shaft, which consist of key parts of rolling unit, through structural analysis. As the results, it showed that the bearing was weaker than shaft. Further the bearing was safe up to 20.4 ton, which was about 2 times of maximum of roller reaction force in case of considering as static load. However, the bearing was safe up to 10.2 ton in case of considering as repeated load.
        4,000원
        4.
        2022.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Damages by jellyfish are occurring frequently around the world. Among them, accidents caused by jellyfish stings are serious enough to cause death. So we designed a jellyfish blocking net and analyzed its stability to prevent sting caused by jellyfish entering the beach. To this end, the dynamic behavior of the jellyfish blocking net according to the current speed (0.25-1.0 m/s) and the net type (50, 100 and 150 mm) on the upper part of the blocking net was modeled using the mass spring model. As a result of simulations for the model, the horizontal tension (horizontal component of the mooring tension) of the mooring line increased with the decrease in the mesh size on the upper part of the blocking net at all current speeds, but exceeded the holding force at high tides faster than 0.5 m/s and exceeded the holding force at all current speeds at low tide. Therefore, the jellyfish blocking nets showed poor stability overall. The depth of the float line had a little difference according to the upper mesh size and increased lineary proportional to the current speed. However, the float line sank too much to block the incoming jellyfish. These analysis results helped us find ways to improve the stability of the jellyfish blocking net, such as adjusting the length of the mooring line and improving the holding power. Therefore, it is expected that this technology will be applied us various underwater structures to discover the weaknesses of the structures and contribute to increasing the stability in the future.
        4,500원
        5.
        2021.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Butterfly valves have been used to control the flow rate of various fluids in many industries because it have unique manageability compare to other valves. However, when a defect occurs due to the failure of the backlash of the power transmission part and the pin breakage of the butterfly valve due to the absence of the design capability of the valve, it is difficult to analyze the cause and maintain it. In this paper, a study was conducted to secure the reliability of the valve by performing structural analysis and analysis using a 3D model of the product to manufacture a high-quality valve.
        4,000원
        6.
        2020.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Recently, drones are widely used for various purposes. Among them, it has long been used for military purposes. A drone is an effective asymmetrical power that can strike opponents at low cost. On the other hand, Jammer to subdue drones are also being developed and put into practical use. In this study, a study was conducted to ensure that the weapon system was equipped with an additional Jammer at low cost, and to respond to threats to small drones and drones, by securing an shock resistance t through the transient response analysis of the shooting impact.
        4,000원
        7.
        2020.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 논문에서는 유한요소해석을 이용하여 흉요추 후방 고정술의 고정분절 변화에 따른 척추 안정성을 평가하였다. 이를 위해 추간판, 인대, 추간관절(Facet joint) 등을 포함한 정상 흉요추(T10–L4)의 유한요소모델을 구축하였으며, 문헌으로 보고된 재료물성치를 부여하였다. 한편, L1을 병변 부위로 가정하였으며, L1-L2, T12-L2, T12-L1-L2 총 3가지 종류의 후방 고정술을 흉요추 유한요소모델에 구현하고 전방 굽힘, 후방 굽힘, 측면 굽힘, 축 회전의 하중 조건을 부여하였다. 시리즈 유한요소해석을 통해 고정분절에 따른 척추경 나사못, 척추골, 추간판의 변형량, 등가 응력, 운동 범위, 모멘트를 계산하였으며, 그 결과를 바탕으로 척추 안정성을 평가하였다.
        4,000원
        10.
        2019.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The pipe for water supply is essential part among SOC (Social Overhead Capital) fields. Pipe for water supply is mainly damaged by deterioration of pipe, earthquake, ground sinking and so on. The leakage of water have been led to enormous economical loss in our country. The purpose of this study was to investigate the structural stability of flexible joint for relaxing impact due to earthquake and ground sinking. For this purpose, flexible joint was simulated using tensile load and internal pressure. As the results, flexible joint for structural stability was needed the tensile load of below 3 ton and internal pressure of below 60 kgf/cm2. However, it is considered that real flexible joint should be applied more high safety factor than that of simulation result because of combined stress.
        4,000원
        11.
        2019.05 구독 인증기관 무료, 개인회원 유료
        Recently, automobile washing methods have been carried out using steam of high temperature and high pressure instead of water. Therefore, it is necessary to secure the structural stability of the steam tank. In this study, it is necessary to reduce the weight of the steam tank by reducing the thickness of the existing steam tank by about 25%. The safety of the product design was verified through simulation to ensure the robustness of the product by securing the structural stability and fatigue analysis at high temperature and pressure of the steam tank according to the weight reduction. For newly developed products compared to existing models.
        4,000원
        12.
        2018.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this study, we investigated the dynamic stability of the system and the semi-analytical solution of the shallow arch. The governing equation for the primary symmetric mode of the arch under external load was derived and expressed simply by using parameters. The semi-analytical solution of the equation was obtained using the Taylor series and the stability of the system for the constant load was analyzed. As a result, we can classify equilibrium points by root of equilibrium equation, and classified stable, asymptotical stable and unstable resigns of equilibrium path. We observed stable points and attractors that appeared differently depending on the shape parameter h, and we can see the points where dynamic buckling occurs. Dynamic buckling of arches with initial condition did not occur in low shape parameter, and sensitive range of critical boundary was observed in low damping constants.
        4,000원
        13.
        2018.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 해수 중 유체력에 의한 인공어초의 활동 및 전도를 평가하기 위한 간편하고 효율적인 사용자 중심의 전산 프로 그램(SCAR program)을 개발하였다. 개발된 전산 프로그램은 인공어초의 안정성 평가 공식인 모리슨(Morison) 식을 기반으로 델파이(Delphi) 코드 및 그래픽 사용자 인터페이스(GUI, Graphic User Interface) 방식을 적용하였다. 개발된 SCAR 프로그램은 학부 및 대학원 과정, 실제 현 장 전문가들의 수산구조물(인공어초 또는 수중구조물 등) 설계 및 안정성 평가에 널리 적용 가능할 것으로 판단된다.
        4,000원
        14.
        2018.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The aim of this paper is to clarify the structural stability of 30m fly(maximum working radius of 30m) and telescopic boom with composition. In order to reduce the weight and insulate, the boom of special vehicle has a 3-stage telescopic boom of DOMEX960, pocket part of acetal, 2-stage refracting boom of ATOS80, insulation boom of glass fiber composition and effector. In this process, CATIA is applied to create 3D modeling, then ANSYS are performed the structural analysis. The structural analysis is performed for a case where the thickness of the insulating boom of the ATOS 80 is 7[㎜] and the thickness of the insulating boom of the FRP material is 15[㎜] and 16[㎜].
        4,000원
        15.
        2017.04 구독 인증기관·개인회원 무료
        Sewerage age more rapidly than other facilities, leading to the destruction of the pipeline. Therefore, the replacement of old sewer pipes through long-term construction is costly. In order to solve this problem, this study investigated the ferronickel based sewer pipe with improved chemichal resistance and durability from concrete rigidity pipe. ABAQUS was used as the finite element analysis program and the load was calculated by the method given in the sewage facility standard. Therefore, the results of this study can be referenced in the design and construction of sewer pipes.
        16.
        2016.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 고체추진기관의 2차원 축대칭 FSI 해석에서 CSS 및 ISS 기법의 수치 안정성을 고찰하였다. 이를 위하여 CSS 및 ISS 기법을 2차원 축대칭 FSI 수치해석 알고리즘에 구현한 프로그램을 작성하고, 이를 ACM 및 BCM 고체추진기관의 복합거동 해석에 사용하였다. 해석 결과들을 비교 분석하여 ISS 기법이 고체추진기관 FSI 해석의 수치 안정성 개선에 효과적인지 검토하였다. 연구결과, ISS 기법을 적용한 FSI 해석은 시스템 시간간격이 작아질수록 수치적 수렴성을 보이며, CSS 기법과 다르게 시간이 진행되어도 수치해의 진동이 발산하지 않는 것을 확인할 수 있었다. 이를 통하여 ISS 기법을 사용하면 ACM 및 BCM의 FSI 해석에 CSS 기법을 이용할 시 나타나는 수치 불안정성을 개선할 수 있음을 확인하였다.
        4,000원
        18.
        2015.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The purpose of this study is to analyze the structural stability of pavement due to water infiltration at the road with infiltration trench as using the FEM(finite element analysis). Five cases for FEM is divided considering the amount of rainfall and rain duration time. The results of FEM show that the more rainfall in a short period time is faster the change of moisture content. Also, it is the proportional relationship between and changing area of moisture content of more than 40% due to rainfall. Case 3 and 4 are necessary to check the installation of infiltration trench because of moisture content of more than 40%, recovery time of initial moisture content, and changing area of more than 40%. Case 1,2, and 5 have no a significant effect on road pavement structure due to lower moisture content and shorter duration time of higher moisture content.
        4,900원
        19.
        2014.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        해상 교량, 고층건물이나 라이저와 같은 세장 주상체의 설계 및 시공이 늘어남에 따라 높은 유속에 대한 동적 안정성 검토의 중요성이 부각되고 있다. 특히 교량구조물은 장대화와 함께 경량화가 진행되었고 지진, 바람 등과 같은 동적 하중에 대해서 진동하기 쉬운 구조물의 특징을 가진다. 구조물 주위를 흐르는 공기에 의해 추가적인 공기력들이 발생하게 되고 이로 인해 공기 흐름장과 물체의 운동 사이에 상호작용을 가져오게 되고 부가적으로 발생된 공기력이 음(-)의 감쇠력으로 유입 풍향에 직각방향인 진동에 작용하여 갤로핑(galloping)등과 같은 자발진동을 발생시킨다. 본 논문에서는 가상경계법을 이용하여 사각 단면, 팔각단면, 모서리가 둥근 사각단면 및 양쪽 모서리가 절단된 형태의 사각단면에 대하여 유동해석을 실시하고 Glauert-Den Hartog가 제시한 방법으로 단면에 대한 갤로핑 불안정성의 발생 가능성을 평가하였다.
        4,000원
        20.
        2012.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study aims to analyze the performance of a submersible fish cage which was designed for developing an economical cage system can be applied in korean aquaculture environment easily. To analyze the performance of the designed cage a model test was carried out. In the test, inclination changes of the upper frame and mooring tensions of model cage were measured during the submerging and surfacing motion in still water and wave condition (period: 2s, wave height: 0.1, 0.2, 0.3m). As a result, in the still water condition the model cage kept horizontal balance and inclination degree of the upper frame was about 1˚. In the wave condition, the model cage showed bilateral symmetric up-and-down motion but the average inclination degree of the upper frame was about 0˚. When the model cage reached at a depth of 1m, the up-and-down motion of the cage was decreased by 12% compared with that of at the surface (period 2s, height 0.3m). In the same wave condition, the maximum and average line tension under the bottom position were about 8% and 11% respectively compared with that of at surface.
        4,200원
        1 2 3