A literature review on the effects of high temperature and radiation on radiation shielding concrete in Spent Fuel Dry Storage is presented in this study with a focus on concrete degradation. The general threshold is 95℃ for preventing long-term degradation from high temperature, and it is suggested that the temperature gradient should be less than 60℃ to avoid crack generation in concrete structures. The amount of damage depends on the characteristics of the concrete mixture, and increases with the temperature and exposure time. The tensile strength of concrete is more susceptible than the compressive strength to degradation due to high temperature. Nuclear heating from radiation can be neglected under an incident energy flux density of 1010 MeV·cm-2·s-1. Neutron radiation of >1019 n·cm-2 or an integrated dose of gamma radiation exceeding 1010 rads can cause a reduction in the compressive and tensile strengths and the elastic moduli. When concrete is highly irradiated, changes in the mechanical properties are primarily caused by variation in water content resulting from high temperature, volume expansion, and crack generation. It is necessary to fully utilize previous research for effective technology development and licensing of a Korean dry storage system. This study can serve as important baseline data for developing domestic technology with regard to concrete casks of an SF (Spent Fuel) dry storage system.

In this study, prediction of later-age compressive strength of ultra-high strength concrete, based on the accelerated strength of concrete cured in hot water was investigated. Comparing other acceleration method, hot water curing method is relatively easy and intuitive to use in the real construction site. The amount of time for evaluation of the concrete strength using the hot water curing method in KS and JIS is too long to predict the strength of the ultra-high strength concrete that are used in the tall building structure. For that reason, curing temperature of 40, 50, 60˚c 3 levels were examined to shorten the amount of time for the evaluation of the strength. As a result, the feasibility of the three days hot water curing method was confirmed.

As architectures have recently become high-risers and mega-structured, stable high strength products have been ensured. Accordingly, use of precast concrete accouplement has been increased in order to facilitate air compression and rationalize construction. Since external rising by the steam heating and internal rising by the accumulation of cement hydration heat for the temperature of members, precast concrete members with large cross-section used for high-rise mega-structure's columns and beams may exhibit different temperature history compared to the precast concrete members for wall and sub-floor with relatively small cross-sections. Therefore, this study aims to elucidate the characteristics of temperature history of mass concrete members cast with high-strength concrete for precast concrete application. In this study, large cross-sectional precast concrete mock-up, unit cement quantity, and temperature histories in manufacturing precast concrete member under different curing condition were inclusively investigated.

In this study, the behavior and ductility characteristics of fiber reinforced concrete was experimentally conducted under high and low temperature conditions. The results showed that the ductility index was increased with temperature increase.

본 연구에서는 양생조건이 다른 압축강도 90 MPa 수준의 고강도 콘크리트 부재의 휨거동 실험을 수행하였다. 실험변수는 정상 및 저온 양생 조건, 인장 철근량 및 콘크리트 압축강도 수준 등을 고려하였다. 8개의 보 부재를 제작하여 휨 실험을 수행하였으며 균열 간격, 하중-처짐 관계, 하중-변형률 관계 및 연성지수를 파악하였다. 실험결과는 철근량이 증가함에 따라 균열 개수는 증가하고 균열간격은 감소하는 경향 을 나타내며, 콘크리트 강도가 높을수록 균열개수가 줄어들기는 하지만 그 효과는 철근량보다는 상당히 작은 것을 알 수 있었다. 설계기준에서 제안된 평균 균열 간격 식과 비교한 결과, 실험결과가 제안식의 결과보다 약간 크게 나타났으나, 제안식은 콘크리트 강도 및 양생조건을 반영 하지 못하는 문제점이 있다. 정상 양생된 부재들의 연성지수는 3.36~6.74이며, 저온 양생된 부재들의 연성지수는 1.51~2.82으로 나타나, 저온 양생된 부재들의 거동은 정상 양생된 부재들에 비해서 연성도지수가 저감됨을 확인하였으며, 본 연구와 기존 연구의 연성지수를 비교한 결과, 고강도 콘크리트 부재의 연성지수는 선행연구의 보통강도 콘크리트의 연성지수 보다 크게 나타났으나, 더 구체적인 결과를 파악하기 위해서 는 추가연구가 필요하다고 판단된다.

The degradation of concrete exposed to high temperature was evaluated by applying ultrasonic pulse velocity evaluation method which is one of the nondestructive tests of concrete. As a result, it is difficult to distinguish compressive strength of concrete and estimate residual compressive strength of concrete. However, it was confirmed that the higher the heating temperature, the lower the compressive strength and ultrasonic velocity of the concrete.

The purpose of this study is to evaluate salt attack durability of the concrete structure which has experienced the fire. Mechanical properties and chloride ion diffusivity of concrete specimens were measured after 2 hours heating at 200℃, 400℃, 600℃, 800℃. FEM analysis was conducted to predict the life expectancy of RC structure using the property values by a series of experiment.

This study examined the effect of outside temperature on the properties of high-strength concrete to determine conditions for four-season construction. With 20 ℃ as the reference temperature, 20, 30, and 40 ℃ were set as hot weather conditions, and 5, -10, and –20 ℃ as cold weather conditions. Properties as the effect of outside temperature on compressive strength of high-strength concrete was studied.

Concrete has been recognized as a material which is resistant to the high temperature, but chemicophysical property of concrete is changed by the high temperature. So, mechanical properties of concrete may be reduced. Therefore, concrete is evaluated mechanical properties for safety inspection. However, research of ultrasonic pulse method is not much. Therefore, the purpose of this study is to Non-Destructive Test of 30, 70, 110MPa concrete exposed high temperature using ultrasonic pulse velocity.

In this study, In this study, Simulation using COMSOL Multiphysics thermal flow program of A company was carried out for thermal diffusion analysis according to depth of concrete exposed to high temperature. As a result of the analysis, it was found that the thermal diffusivity decreased with the depth and the temperature difference decreased with the heating time.

The purpose of this study is to evaluate salt attack durability of the concrete structure which has experienced the fire. Mechanical properties and chloride ion diffusivity of concrete specimens were measured after 2 hours heating at 200℃, 400℃, 600℃, 800℃. FEM analysis was conducted to predict the life expectancy of RC structure using the property values by a series of experiment

This study examined the effect of outside temperature on the properties of high-strength concrete to determine conditions for four-season construction. With 20 ℃ as the reference temperature, 20, 30, and 40 ℃ were set as hot weather conditions, and 5, -10, and –20 ℃ as cold weather conditions. Properties as the effect of outside temperature on compressive strength of high-strength concrete was studied.

Concrete has been recognized as a material which is resistant to the high temperature, but chemicophysical property of concrete is changed by the high temperature. So, mechanical properties of concrete may be reduced. Therefore, concrete is evaluated mechanical properties for safety inspection. However, research of ultrasonic pulse method is not much. Therefore, the purpose of this study is to Non-Destructive Test of 30, 70, 110MPa concrete exposed high temperature using ultrasonic pulse velocity.

초고강도 콘크리트를 이용한 부재의 내화 성능을 검토하기 위해서는 실제부재 단위의 시험에 의한 평가가 요구되고 있다. 그러나 실제부재 실험을 하기 위해서는 재하 능력이 큰 시험 장비가 필요하기 때문에, 재료 모델을 이용한 해석적 연구를 통해 내화 성능을 평가하고 있다. 본 연구에서는 80, 130 및 180 MPa의 초고강도 콘크리트를 대상으로 고온 가열시의 변형 특성을 실험적으로 평가하고 초고강도 콘크리 트에 대한 기존 변형 모델의 적용을 검토했다. 그 후, 최소 제곱법에 의해 실험 값과 기존의 변형 모델을 적용한 계산 값의 누적 오차가 가장 작 은 상수 값을 도출하고 초고강도 콘크리트에 적용 할 수 있는 변형 모델을 제시했다.

The thermal properties of high temperature cementitious thermal storage material were investigated in this paper. Ordinary portland cement was used as basic binder and the effect of the replacement of slag was investigated.

In this study, strain properties of high strength concrete (HSC) have been evaluated at elevated temperature. To evaluate the strain behaviour of HSC at elevated temperatures, ø100 × 200 mm cylindrical specimens of HSC with compressive strengths of 80, 130 and 180 MPa concrete were heated to 700 °C at a rate of 1 °C/min. As a results, Total strain of HSC was showing shrinkage with compressive strength increasing.

The mechanical and thermal properties of high temperature aluminate cementitious thermal storage material were investigated in this paper. Alumina cement was used as basic binder and the effect of the replacement of fly ash, silica fume, calcium sulfo aluminate and graphite for alumina cement was investigated.

Recently, the use of high strength concrete is increasing in order to increase of high-rise building. High strength concrete has properties that are weak in fire. In severe case, buildings have risk of collapse owing to occur spalling. For these reasons, the authors think it is required to conduct various study about thermal and mechanical properties of high strength concrete in fire. This study analyze thermal and mechanical properties of high strength concrete at elevated temperature to use composite fibers mixed method which is one of method to prevent spalling.

This study is a basic studies for estimating the temperature history of the concrete after a fire. In this study measured the carbonation depth after fire resistance tests. As a result, according to the existing fire damage diagnostic methods, carbonation depth must be than 5cm. However, the actual measured carbonation depth was 1.5 ~ 3.3cm.