순환여과양식시스템(RAS)은 사육수를 여과하여 재사용하며 고밀도로 사육하는 양식 방법으로 수질관리 및 소독이 매우 중요하다. 병원체로 인한 질병 발생을 예방하고 수질 개선에 도움을 주기 위하여 최근 코로나 방전 플라즈마 처리수(plasma water, PW)를 이용한 사육수 소독법이 제안되었다. 본 연구에서는 플라즈마 발생장치를 설치한 순환여과시스템(처리구, PW system) 과 설치하지 않은 순환여과시스템(대조구, No PW system)에서 40일 동안 틸라피아를 사육하 면서 수질 변화 및 어체의 성장을 조사하였다. 이를 위해 10일 마다 물을 채수하여 UV 투과율 과 일반 세균 수 변화를 측정하였고 틸라피아의 성장지표, 생존율 및 조직학적인 차이를 분 석하였다. UV 투과율 실험 결과 처리구와 대조구는 실험 시작 시에(0일) 각각 74.1%, 74.8%를 나타냈으며, 40일째에 처리구는 91.8%로 증가한 반면 대조구는 65.2%로 감소하여 수중 유기 물 감소 효과를 확인하였다. 일반 세균 수는 40일에 이르러 처리구(101.69 CFU/ml)에서 대조구 (103.25 CFU/ml) 보다 유의하게 감소하였다(p<0.05). 틸라피아 성장차이 조사 결과 처리구는 대조구에 비해 총 증중량이 유의하게 높았으며(p<0.05), 다른 성장지표도 처리구가 상대적으로 높았으나 통계적으로 유의한 차이는 아니었다(p>0.05). 또한 처리구는 100%의 생존율을 보였 으며, 조직학적으로 대조구와 차이가 나타나지 않았다. 따라서 플라즈마 처리수는 순환여과양 식시스템 내 어류의 성장과 건강에 해를 끼치지 않고 수질 개선에도 효과가 있을 것으로 기대 된다. 그러나 현장 적용 시에는 탈기수조의 설치 등 주의사항을 충분히 고려하여야 할 것이다.

Dishwashing tools such as sponges, scourers, and dishcloths are known to harbor dense and diverse microbial communities, including pathogenic bacteria. In this study, the potential of corona discharge plasma jet (CDPJ) as a disinfectant was tested to improve the hygienic quality of dishwashing tools. For the simulation of microbial contamination, selective pathogenic bacteria (Escherichia coli O157:H7, Staphylococcus aureus, and Pseudomonas putida) were inoculated on selected dishwashing tools (dishcloth, sponge, and scourer) at concentrations of 6.55 to 8.77 log CFU/cm 2 . CDPJ generated at 20 kV voltage and 1.5A current was used for decontamination, whereas a sample-to-electrode distance of 25 mm was maintained during the treatment. Following CDPJ treatment for 5 min, the viable counts of E. coli O157:H7, S. aureus, and P. putida were reduced by 4.30-4.56, 3.71-4.78, and 3.50-3.83 log, respectively. The rates of inactivation were varied among the pathogens, decreasing in the order E. coli O157:H7 > S. aureus > P. putida. Among tested kinetic models, namely log-linear, log-linear with shoulder, and Weibull models, the log-linear with shoulder model was found to be the most suitable model to explain the CDPJ inactivation of the pathogens. In conclusion, CDPJ can be used as a potential sanitizing agent for dishwashing tools.

Benzo[α]pyrene (BaP), a carcinogenic polycyclic aromatic hydrocarbon, is ubiquitous in nature. It is generally found in heat-treated foods like roasted sesame seeds. BaP degradation has attracted attention due to the recalcitrant nature of BaP. In this study, corona discharge plasma jet (CDPJ) was used to degrade BaP on glass slides and in food materials. The plasma discharges were generated using air as working gas under atmospheric pressure conditions and at different currents (1.00, 1.25, and 1.50 A). Optimal BaP degradation was observed upon using CDPJ generated at 1.50 A current and at 15 mm sample-to-electrode distance (STED). Under these conditions, initial BaP concentration on slides was reduced maximally by 87.09% in 30 min. The degradation kinetics were well-fitted by Weibull tail model compared with others. In food commodities (roasted sesame and perilla seeds), the average levels of BaP degradation ranged between 32.96-45.90% following CDPJ treatment for 30 min.

Electrolyzed water (EW) has been regarded as a new sanitizer by food industry. In this study, EW was used for perilla leaves sanitization. The optimum EW was produced at flow rates of brine and water of 100 mL/min and 300 mL/min, respectively. By soaking in EW only, the initial microbial counts of aerobic bacteria were reduced by 1.73 log(CFU/g), while 1.94 log(CFU/g) reduction was noted by using EW soaking followed by CDPJ treatment. In similar manner, counts of yeasts and molds were reduced by 1.83 and 2.06 log(CFU/g); coliform were reduced by 1.13 and 1.3 log(CFU/g), respectively. Combination of EW and CDPJ was more effective for microbial reduction. EW treatment did not affect sensory properties, instrumental color characteristics. However, it was observed that total phenolics and DPPH radical scavenging activity of perilla leaves were significantly increased with EW soaking time.

In this study, the use of corona discharge plasma jet (CDPJ) for the improvement of hygienic quality of semi-dried mackerel pike (Gwamegi) was investigated. Different microbial contaminants, namely aerobic and marine bacteria, coliform bacteria, Staphylococcus aureus and yeasts and mold, were detected in the range 4.2-6.2 log CFU/g in Gwamegi samples. The CDPJ generated using 20 kV DC and at 58 kHz frequency was used for the treatment of Gwamegi for 0-10 min. The bacterial contaminants were inactivated in the range of 1.9-3.3 log CFU/g on the treatment for 10 min. Additionally, yeasts and mold were inactivated by 3.2 log CFU/g. The inactivation pattern fitted well to the first-order kinetics model. The CDPJ treatment for 10 min did not exert statistically significant changes (P > 0.05) in pH, moisture content, water activity, peroxide value, acid value and volatile basic nitrogen content of Gwamegi in comparison to untreated control samples. On the contrary, significant changes (P < 0.05) were noted in color and thiobarbituric acid reactive substances levels upon the CDPJ treatment. However, the CDPJ-treated Gwamegi samples displayed better sensory properties in terms of appearance, visual color, and flavor as compared to controls.

Hydrogen sulfide (H2S) emitted from various sources is a major odorous compound, and non-thermal plasma (NP) has emerged as a promising technique to eliminate H2S. This study was conducted to investigate lab-scale and pilot-scale NP reactors using corona discharge for the removal of H2S, and the effects of relative humidity, applied electrical power on reactor performance and ozone generation were determined. A gas stream containing H2S was injected to the lab-scale NP reactor, and the changes in H2S and ozone concentration were monitored. In the pilotscale NP experiment, the inlet concentration and flow rate were modified to determine the effect of relative humidity and applied power on the NP performance. In the lab-scale NP experiments, H2S removal was found to be the 1st-order reaction in the presence of ozone. On the other hand, when plasma reaction and ozone generation were initiated after H2S was introduced, the H2S oxidation followed the 0th-order kinetics. The ratio of indirect oxidation by ozone to the overall H2S removal was evaluated using two different experimental findings, indicating that approximately 70% of the overall H2S elimination was accounted for by the indirect oxidation. The pilotscale NP experiments showed that H2S introduced to the reactor was completely removed at low flow rates, and approximately 90% of H2S was eliminated at the gas flow rate of 15 m3/min. Furthermore, the elimination capacity of the pilot-scale NP was 3.4 g/m3·min for the removal of H2S at various inlet concentrations. Finally, the experimental results obtained from both the lab-scale and the pilot-scale reactor operations indicated that the H2S mass removal was proportional to the applied electrical power, and average H2S masses removed per unit electrical power were calculated to be 358 and 348 mg-H2S/kW in the lab-scale and the pilot-scale reactors, respectively. To optimize energy efficiency and prevent the generation of excessive ozone, an appropriate operating time of the NP reactor must be determined.

Non-thermal techniques for microbial decontamination in foods are becoming more promising. This work aims to evaluate suitability and effectiveness of corona discharge plasma jet (CDPJ) for the inactivation of microbial contaminants of dried squid shreds. CDPJ was generated at 20 kV DC and at 58 kHz frequency. Upon the CDPJ treatment for 3 min of the shreds, bacterial contaminants namely aerobic, marine and Staphylococcus aureus were inactivated by 2.0, 1.6, and 0.9 log units, respectively. Also, a 0.9 log reduction of yeasts and molds contaminants was observed. The inactivation pattern fitted well to the pseudo-first-order model rather than first-order kinetic model. The CDPJ treatment did not exert statistically significant (P>0.05) changes in color characteristics and volatile basic nitrogen content of the shreds, as compared to untreated controls. In contrast, the moisture and thiobarbituric acid reactive substances levels were significantly (P<0.05) altered by the plasma exposure. However, the treatment exerted no significant (P>0.05) impact on the sensory characteristics of the shreds. The CDPJ was found effective for bio-decontamination of real-world samples of dried squid. This technology can readily be applied to commercial dried squid processing.

Different pathogenic microorganisms have been reported to cause sprouts-associated outbreaks. This work aimed to evaluate the effect of corona discharge plasma jet (CDPJ) on disinfection of the natural bio-contaminants of broccoli seed and also studied the plasma effect on sprout seed germination rate and physico-chemical properties of sprouts. Aerobic bacteria, molds and yeasts, B. cereus, E. coli, Salmonella spp. were detected on the broccoli seed surface. After 0-3 min treatment using CDPJ, the detected microorganisms were reduced in the range of 1.2-2.3 log units. Inactivation patterns were better explained using pseudo-first-order kinetics. The plasma treatment of seeds up to 2 min exhibited positive effects on the germination rate and the seedling growth. The physico-chemical and sensory characteristics of sprouts were unaffected due to the CDPJ treatment of their respective seeds. The CDPJ can potentially be used for microbial decontamination of broccoli seeds.

코로나방전플라즈마제트(CDPJ) 생성장치를 제작하여 조업특성을 조사하고 비가열살균기술로서의 활용가능성을 탐색하고자 E. coli를 대상으로 살균성능을 조사하였다. CDPJ장치는 전력공급장치, 변압기, 전극, 송풍기, 시료처리부 등 다섯 부분으로 구성하였다. 전압 10.0-20.0 kV의 직류전기를 10.0-45.0 kHz 구형파 펄스형태로 텅스텐리드 전극에 투입함으로써 코로나방전 플라즈마를 생성하고 동시에 전극사이로 강한 공기를 주입함으로써 하부방향으로 토출하는 플라즈마제트를 생성하였다. CDPJ 처리는 플라즈마 토출구 하부에 처리대상 물체를 위치하고 일정시간 처리하는 방식으로 시행하였다. 주파수를 높일수록 다량의 전류가 유입되었고, 비례하여 전력소비량도 증가하였다. 플라즈마 생성을 위한 임계전류는 1.0 A, 임계주파수는 32.5 kHz이었으며, 1.5 A 이상 40.0 kHz 이상에서 안정적인 플라즈마제트가 생성되었다. 플라즈마제트의 길이는 전류에 따라 증가하였고, 2분 이하 처리 시 대상물체의 표면온도 상승은 25oC를 하회하였다. E. coli 살균력은 전류세기에 비례하여 증가하였고, 전류 1.5 A에서 1분간 CDPJ처리에 의해 4.5 log 이상의 살균효과를 보였으며, 살균패턴은 2단계 1차 반응으로 확인되었다.

The biodiesel production characteristics in a pulsed-corona plasma reactor has been investigated through parametric tests. Transesterification of rapeseed oil together with camelina oil was done with the change of such variables as voltage of power, molar ratio, KOH catalyst and temperature. The energetic electrons emitted from pulsed-corona plasma has contributed to the enhancement of yield on rapeseed oil in short time (15 min). The higher yield on camelina oil was observed in 5 min. The optimal parameters were shown as the voltage of 23 kV, the molar ratio of 5/1, the content of KOH catalyst of 0.6 wt% and the temperature of 28℃ under the rotating rate of spark gap of 900 rpm.

본 연구에서는 상온에서 정방성 조성인 Pb0.9888Sr0.012(Zr0.52Ti0.48)O3계 세라믹스를 소결 후 직류전계 및 코로나를 이용하는 방법으로 소결시편을 분극한 후 분극방법에 따른 시편의 압전특성을 조사하였으며, 열화현상을 평가하기 위한 방법으로 시편의 내부응력의 차이를 조사하였다. 이 결과 코로나 분극방법은 직류분극에 비하여 30˚C정도 저온에서도 최대 Kp값을 얻을 수 있었으며 열화현상이 천천히 진행되었고 절연파괴가 발생하지 않는 등의 장점이 관찰되었다. 그러나 Kp값은 직류분극의 경우가 코로나 분극에 비하여 약 9~10%정도 높은 값을 나타내었다.

Rapid industrial development has led to a serious problem of pollution in the industrial sector. With the increasing social need for environmental protection, research on air pollution prevention equipment for reducing pollutants in industrial processes is actively being undertaken. The deterioration of existent, installed facilities, their increased emission rates, and the strengthening of the effluent quality standards make complying with permissible emission standards difficult. In fact, installing new electric precipitators or complementing existent facilities is inevitable. The expansion and complementation of the installed electrical precipitators have led to improvements in dust collection efficiency, shorter working times, and lower costs. Because of its easy installation and simple manufacturing process, the production method with the discharge electrode of an electric precipitator is widely used. The following conclusions were reached by classifying discharge electrodes into four types based on the production method and mutually comparing them by their dust collection efficiency. None of the four types used in this study were damaged by impact. However, we were able to confirm some strain from the compression sites of both type A and type B. Both type B and type C are expected to have greater dust collection efficiencies than the other models due to their large vibration transmissibility. Moreover, the high vibrational energy is expected to cause rapping damage during its operation. Particularly, in the case of type B, some of the strain was found at the end of the compression site. The coupling schemes of both type C and type D are out of vibration transmissibility. On the other hand, the ability to maintain straightness and solidity of the side is regarded as outstanding and stable. Type D has outstanding on-site workability, considering the presence of locking, structural stability, and work conditions. From these experiments, we determined that type C is the most ideal connection method of discharge electrode, considering its construction period of renovation. Type C is inferior to type D with regard to on-site workability. However, type C has outstanding dedusting transmission with regard to the straightness, solidity maintenance, and vibration of shearing stress.