PURPOSES : Recently, interest in radioactive accidents has increased due to domestic and international nuclear power plant accidents. In particular, local residents' concerns are increasing due to safety issues such as radioactive leaks at the Hanbit Nuclear Power Plant in South Korea. As Gwangju Metropolitan City is not included in the emergency planning area set by the Nuclear Safety and Security Commission, there are significant limitations to establishing disaster prevention measures for nuclear power plant accidents. Considering the Fukushima and Hanbit nuclear power plant accidents, the improvement of Gwangju Metropolitan City's radioactive leak accident response manual is urgently required. This study aimed to establish disaster prevention measures to respond to nuclear power plant accidents in Gwangju Metropolitan City in the event of a Hanbit Nuclear Power Plant accident and to improve resident protection measures by estimating the arrival time of radioactive materials and radiation dosage through a nuclear power plant accident simulation. Additionally, we aimed to supplement the on-site action manual for radioactive leaks at the Hanbit Nuclear Power Plant. METHODS : This study focused on establishing disaster prevention measures centered on Gwangju Metropolitan City in the event of a major accident such as a radioactive leak at the Hanbit Nuclear Power Plant. Simulations were conducted assuming a major accident such as a radioactive leak, measures to improve resident protection were established by calculating the arrival time of radioactive materials and radiation dosage in the Gwangju area in the event of a nuclear power plant accident, and on-site response action manuals were supplemented in response to a radioactive leak. RESULTS : This study considered the concerns of local residents due to the Fukushima nuclear power plant accident and the Hanbit nuclear power plant failure, conducted a simulation to derive the impact on Gwangju Metropolitan City, and examined the effectiveness of an on-site response manual for radioactive leaks to derive improvement measures. CONCLUSIONS : In the event of an accident at the Hanbit Nuclear Power Plant in Gwangju Metropolitan City, insufficient portions of the on-site response action manual should be supplemented, and close cooperation with local governments within the emergency planning area should be ensured to respond to radioactive disasters. Therefore, based on the revised on-site response action manual for radioactive leaks, close cooperation and a clear division of roles among local governments will enable effective resident protection measures to be implemented in the event of a radioactive disaster.

When a fire breaks out in a distribution center, it causes a lot of damage. And the most casualties are caused by Fire accidents. Therefore, training for fire prevention should be mandatory at the distribution center. Also, the contents of education should be different in room temperature warehouses and low temperature warehouses. Fire education in low-temperature warehouses should be more emphasized. This is because many fires occur in low-temperature warehouses. In this study, a study was conducted to determine the important order of training hours and contents for fire prevention education according to the type of distribution center. The importance of time and content for safety education in all types of warehouses did not differ significantly. It was first decided that safety prevention training should be conducted periodically in all types of warehouses

Since 2024, small business are also going to be ruled under the Serious Accident Punishment Act. As the scope of the law expands, the small logistics companies are required to pay more attention on preventing serious accidents on the field. Freight vehicle accidents can cause personnel accidents and cargo accidents which are the two serious accidents that the Serious Accident Punishment Act is trying to prevent. The purpose of this research are to study the factors that cause the serious accidents that happens in the small logistics companies and to suggest preventive. The results of the study shows that fall prevention is the top-priority and then driving experience, safety management, and cargo driving hours. However, the gaps between the evaluation values of each are not huge, which means all the preventives are significant.

Construction industry is considered as one of the most high-risk industries for work-related injuries and fatalities, accounting for more than half of fatalities in Korea. Advanced countries have recognized the critical role of designers in preventing construction accidents and have established regulations on design for safety. In line with this, the Korean government have also implemented regulations that require owners and designers to review the safety of design outcomes. However, it has been observed that designers face challenges in identifying hazards and integrating design solutions at the design stage mainly due to their shortage of required knowledge and skills. This study aimed to examine design solutions that can be applied to prevent fall accidents in the construction industry, and to establish a relationship between these solutions and fatal fall accidents occurred over the past three years in Korea. This study also analyzed the relationships of four variables (construction type, cost, work type, and fall location) with design solutions. The results indicated that all four variables have significant relationships with design solutions, with fall location showing the strongest relationship. The design solutions and their relationships with fatal fall accidents identified in this study can be utilized in identifying hazard and integrating design solutions to ensure design for safety.

Recently, virtual reality (VR) and augmented reality (AR) technologies are attracting attention as core technologies in the era of the 4th industrial revolution. These virtual and augmented reality technologies are being used in a variety of industries, including the construction industry, healthcare industry, and manufacturing industry, to innovate in communication and collaboration, education and simulation, customer service and reinvention of the customer experience. In this paper, VR-based experiential safety education was conducted for workers of shipbuilding companies in Ulsan city, and for them, the educational effectiveness such as immersion, site applicability, safety accident prevention, education satisfaction, overall performance, and safety behavior in VR-based safety experience education were measured. In addition, we examined whether the immersion of VR-based safety experience education affects site applicability, safety accident prevention, educational satisfaction, overall performance, and safety behavior. Furthermore, it was analyzed whether site applicability plays a mediating role in the relationship between immersion and safety accident prevention. As a result, it was found that the immersion of VR-based safety experience education affects site applicability, safety accident prevention effect, education satisfaction, overall performance, and safety behavior, and that site applicability mediates between immersion and safety accident prevention. Based on these results, we suggests a direction for the development of VR-based contents in the field of safety and health and the transformation of safety and health education in the future.

Artificial intelligence (AI) has been applied to most industries by enhancing automation and contributing greatly to efficient processes and high-quality production. This research analyzes the applications of AI-based automobile accident prevention systems. It deals with AI-based collision prevention systems that learn information from various sensors attached to cars and AI-based accident detection systems that automatically report accidents to the control center in the event of a collision. Based on the literature review, technological and institutional changes are taking place at the national levels, which recognize the effectiveness of the systems. In addition, start-ups at home and abroad as well as major car manufacturers are in the process of commercializing auto parts equipped with AI-based collision prevention technology.

한국선원통계연보에 따르면 2016년 기준 선원의 직무상 재해율 6.02%는 고용노동부에서 발행한 2016년 산업재해 현황분석에 따른 육상노동자 평균재해율 0.49%보다 12.3배 높은 것으로 나타나 선내 안전·보건과 관련한 사고율이 심각한 수준이다. 2006년 해사노동협약에는 규정 제4.3조, 제3.1조 및 제1.1조에 선원의 재해와 관련하여 선내 안전·보건 관련 규정을 두고 회원국에서 이행하도록 하고 있으며, 우리나라 선원법에서도 제78조부터 제83조까지 동 협약 제4.3조, 제3.1조 및 제1.1조 수용을 위한 법적 근거를 마련하였다. 특히, 선원법 제79조에서는 협약의 요구사항인 선내 안전·보건 및 사고예방 기준을 해양수산부장관이 정하여 고시하도록 되어 있다. 그러나 협약의 요구사항을 선원법 개정을 통해 법으로는 수용하였으나 선내 안전·보건 및 사고예방 기준의 제정과 같이 실제 이행이 되지 않고 있어 선원의 재해율이 협약이 이행되기 전과 비교하여 개선이 되지 않고 있다. 따라서 이 논문은 선원의 재해율 감소를 위한 하나의 방안으로 해사노동협약 규정 제4.3조에서 요구하는 선내안전보건기준의 법적 성질을 선박소유자의 안전배려의무를 중심으로 살펴보고 그 이행 및 집행을 위한 제도적 개선사항을 제안하였다.

정부와 안전보건공단에서는 건설현장의 안전사고를 줄이기 위하여 감독․점검, 기술지도, 재정지원 등의 산업재해예방 활동을 지속적으로 수행하여 왔다. 하지만, 전체 산업의 사고사망만인율과 재해율이 전반적으로 감소 추세에 있는 반면에, 건설업의 사고사망만인율 및 재해율은 2014년 이후 오히려 증가 추세에 있다. 특히, 2016년 재해통계를 기준으로 전체 건설업 재해자의 약 70%가 공사금액 20억 미만의 소규모 건설현장에서 발생하였다. 이러한 소규모 건설현장의 재해를 줄이기 위해서는 현재의 산업안전보건법 상의 소규모 건설현장 산업안전보건관리체제와 고용노동부 및 안전보건공단에서 수행하고 있는 소규모 건설현장재해예방 사업에 대한 실효성을 파악하고 개선할 필요가 있다. 현 산업안전보건관리체제에서는 건축공사 기준으로 120억 이상인 공사인 경우 안전관리자를 의무 선임하도록 되어 있으며 3억에서 120억 미만 공사의 경우 재해예방지도기관의 기술지도를 받도록 되어 있다. 또한, 안전보건공단에서는 민간위탁기관을 지정하여 3억 미만 건설공사의 안전관리를 지원하고 있으며, 클린사업장 조성지원사업을 통해 20억 미만 소규모 건설현장의 추락재해예방을 위해 시스템 비계, 사다리형 작업발판 및 안전방망 등의 설치 비용을 지원하고 있다. 본 연구에서는 공사금액별 재해통계 및 안전관리자 선임관련 제도를 분석하여 안전관리자 선임 대상을 현행 건축공사 120억 이상인 공사에서 단계적으로 50억까지 확대할 것을 제안한다. 설문조사와 전문가 의견을 수렴하여 재해예방지도기관의 기술지도 영역을 조정하고 실효성을 강화하기 위한 방안을 수립하고, 클린사업장 조성지원사업의 사업 확대 요구 및 개선사항을 도출한다.

Among the industrial disasters caused by drop, ladder related drop disasters are occurred the mostly. The victims are occurred continuously. This study analyzed current situation of industrial disasters for recent 10 years(2005~2014) and compared・analyzed statistics of death disasters of ladder by workplace scale, age, occupation, employment type, working content, scarred area, etc. in detail. This study suggested direction of safety standard modification for ladder that is an original cause material of many drops, direction of safety training strengthening of small-scaled workplace, and safety model based on disaster statistics and should contribute to reduction of disaster rate for ladder working.

선박의 해양사고로 유출된 대량의 기름유출로 인한 해양오염 피해규모는 매우 심각하다. 국제해운 역사에 기록되는 대형 해양오염사고의 대부분은 유조선으로 인해 발생하였으며, 이러한 사고로 인해서 연안국들의 해양환경은 파괴되고 어자원은 오염되어 피해주민들이 생계유지의 어려움을 겪는 등 경제적 손실은 이루 말할 수 없이 크다 하겠다. 선박으로 인한 해양오염을 방지하고 해양환경을 보호하기 위한 목적으로 1954년 제정된 OILPOL협약은 기국의 관할권을 보장하고 항만국의 개입을 최소한으로 제한시켰다. 그러나 국제무역과 세계 선복량의 지속적인 성장과 함께 선박의 해양사고로 인한 오염이 경제 그리고 환경에서 예측할 수 없을 만큼의 막대한 피해를 유발시킴에 따라 연안국과 항만국은 관할권을 확대시키고자 노력하였다. 이러한 시대적 요구와 현실적인 문제점을 해결하기 위한 노력으로 1973년 IMO의 MARPOL73/78협약이 제정되었고 1958년 해양법협약 보다 진보된 해양오염방지에 관한 연안국과 항만국의 관할권이 반영된 1982년 UN해양법협약이 제정되었다. 그러나 이러한 국제협약과 달리 외국적 선박의 항만국 통제 집행에 있어서 일방적으로 국내법을 적용함으로써 국제협약의 관할권과 일치되지 않는 집행이 발생하고 있다. 또한, 외국적 선원을 상대로 한 재판과정에서 신병을 확보하기 위한 목적으로 UN해양법협약에 따라 부과되는 보석금이 과도하게 부과되거나 오랜 기간 억류되는 사례가 발생하는 경우도 있다. 따라서 이 논문에서는 외국적 선박의 해양오염사건 분석을 통해서 국가 관할권과 선원의 인권문제와 관련된 국제법적 쟁점을 도출하고 이를 개선하기 위한 방안을 제시하고자 한다.

Due to increased demand for remodeling and repair in construction market in recent year, the usage of horse scaffold is increasing in the indoor finish works. Injuries related horse scaffold are mainly caused by poor installation or of careless handling of scaffold. Approximately 300 workers are injuried at construction site every year, it is accounting for about 1.5% of the total construction sector and has increased on a year-to-year trends. But the main contents between national standards and speccifications related to the manufacture and usage of horse scaffolds are mutually inconsistent, In particular, the rules on occupational safety and health standards are the basis for the prevention of industrial injuries, there is no explicit application being made to the horse scaffold commonly used on construction sites. The purpose of this study was to analye the manufacture and usage situations in order to reduce construction injuries that occur at the horse scaffolds. It will be utilized the results of the analysis as the basis data for unifying the major domestic standards and specifications associated with the manufacture and usage of horse scaffold.

This study of small ＆ Medium-Sized construction sites construction disaster prevention technology conduction-site visits from the map results report by the inspector on-site advice and technical guidance for the analysis of deficiencies and potential construction of disaster revealed the potential factors causing an accident as follows. As a results, Should not be a once a month visits. Therefore should be changed at least twice a month to help prevent accidents of this system is to be judged.

Safety accident rate of small-medium construction site is high. because of lack of safety management system, lack of safety management capacity, lack of investment for safety, Owner's insufficient awareness about safety. In order to improve this, Currently in Occupational Safety and Health Act, Construction site of amounts more than 300 million won less than 120 billion (architectural),150 billion won(civil) mandatory subject to the technical guidance on construction accident prevention. Context of construction accident causes with construction accident rate relationship analysis and case analysis of technical guidance, through a survey of stakeholders in the technical guidance drawn the problems of the construction accident prevention technical guidance system and ways to improve on this.

Weight training to prevent industrial accidents and make system at the base will be a industrial safety and health education systems. But listening to the education personnel joined in disaster prevention may not be easy to give a big effect on industry if you don't mind. Modern variety of sectors and complex operations are being made. This is industrial sites are various workers involved, and varied tasks are carried out, counselor.