PURPOSES : The purpose of this study was to quantitatively evaluate the variability of LiDAR performance indicators, such as intensity and Number of Point Cloud(NPC), according to various environmental factors and material characteristics. METHODS : To consider the material characteristics of road safety facilities, various materials (Reference Material(RM), reflective sheet, matte sheet, granite, plastic, and rubber) were used in a darkroom, and the performance indicators of LiDAR were repeatedly measured in terms of changes in the measurement distance, rainfall, and angle of observation. RESULTS : In the case of standard reflective materials, the intensity measurement value decreased as the measurement distance and rainfall increased. The NPC showed a tendency to decrease as the measurement distance increased, regardless of rainfall intensity. For materials with high-intensity values, it was found that rainfall intensity and color had negligible effect on the change in intensity compared with the measurement distance. However, for materials with low-intensity values, it was found that the measurement distance, rainfall intensity, and color all had a significant effect on the change in intensity. CONCLUSIONS : For materials with high-intensity values, it was found that rainfall and color had negligible effect on change in intensity compared with the measurement distance. However, for materials with low-intensity values, the measurement distance, rainfall, and color all had a significant effect on the change in intensity value.

PURPOSES : Experimental findings pertaining to the mechanical properties of calcium aluminate cement (CAC)-based repair mortars incorporated with anhydrite gypsum (AG) are described herein. METHODS : To prepare the mortars, three different levels of AG were adopted and the ratio of water–cementitious materials was fixed at 0.50. For comparison, mortar composed of ordinary Portland cement was prepared. The fluidity, setting time, compressive and bond strengths, absorption and surface electric resistivity of the mortars were measured at predetermined periods. RESULTS : The incorporation of AG increases the fluidity but decreases the setting time of the CAC-based repair material system. However, the AG in the CAC mixes does not effectively enhance the compressive strength of the mortars owing to the decreased formation of CA hydrates, such as CAH10 and C2AH8. Meanwhile, the mortar with 10% AG shows excellence absorption. CONCLUSIONS : The mechanical properties of CAC based-mortars rely significantly on the amount of AG incorporated. However, further studies regarding the microstructure and durability of CAC-AG repair mortars must be conducted to obtain the optimal mixture.

PURPOSES : In this study, a system is investigated and developed to remove fog by injecting air onto a road using high-pressure air generated by turbo blowers installed on both edges of the road without using artificial chemicals. METHODS : A test device was constructed on a scaled road measuring 5 m long. A 225 kW class turbo blower was used to supply air. An air injection nozzle was installed to allow high-pressure air supplied from the turbo blower to be sprayed vertically from the edge of the road and horizontally from the surface of the road. Ten micro humidifiers were used to generate fog. RESULTS : Experimental results show that when ground fog occurs on the road, spraying air only in the vertical direction cannot effectively remove the fog. However, when vertical and horizontal nozzles are used simultaneously, both ground fog and flowing fog are removed effectively. CONCLUSIONS : A system for removing fog by spraying air jet is constructed, and fog is generated using a micro humidifier. Results from the fog removal performance test show that the system effectively removes fog.

PURPOSES : This study is performed first to define the aging of road facilities and to analyze the effects of environmental factors on the deterioration of median barriers. METHODS : The aging of road facilities is defined using an analytical hierarchy process (AHP). The first stage is associated with the period, facilities, and maintenance, whereas the second stage is associated with the details. The effects of environmental factors on the deterioration are analyzed by measuring the carbonation depth and compression strength. Two regions, i.e., Gangwon and Busan, are compared separately. Top, middle, and bottom samples are analyzed for both regions. RESULTS : Based on the result of the AHP analysis, weights for period (0.220), function (0.410), and maintenance (0.370) are derived. The average carbonation depths are 11.12 and 9.78 mm for Kangwon and Busan, respectively. The estimated values of compressive strength at Gangwon are 19.7 MPa (Wonju), 24.7 MPa (Samcheok A), and 25.9 MPa (Samcheok B), 20.2 MPa (Haeundae), 23.8 MPa (Yeongdo), and 29.5 MPa (Nam). CONCLUSIONS : The aging of road facilities is associated with subpar functionality and durability. Furthermore, the median barriers constructed in the Gangwon region deteriorated more significantly than those in the Busan region owing to environmental factors. In addition, the bottom samples are more affected by aging than the top samples.

PURPOSES : This study attempts to reveal the limitations of the current asset valuation methods for road infrastructure, based on national accounting standards. We proposed novel asset valuation methods, namely; the nearly land price and ratio-based method(NLP&R), and the consumption-based depreciation method(CBD). In addition, we verified the possibility of application through the research on the road network of Daejeon Metropolitan City. METHODS : This study proposes a novel re-evaluation method for road facilities. Regarding land, the authors proposed calculating the asset value, using the arithmetic average of the publicly announced land price of nearby land, located on both sides of the road section. For structures, a consumption-based depreciation(CBD) method that reflects the current condition level of structures was proposed. RESULTS : Owing to the application of the evaluation method for the current guidelines, land value was evaluated at 0.84-8.12 trillion won, pavement value at 8.75 trillion won, tunnel value at 0.26 trillion won, and bridge value at 2.09 trillion won. Owing to the application of the novel evaluation method proposed in this study on road facilities of Daejeon City, land value was estimated at 6.96 trillion won, tunnel value at 0.28 trillion won, and bridge value at 2.40 trillion won. CONCLUSIONS : We discovered that four current evaluation methods for land prices have some limitations that were over-or underestimated. However, in the case of the novel evaluation method proposed in this study, the value of land assets was estimated at 6.96 trillion won, by applying the nearly land price and ratio-based method. The road pavement was evaluated at approximately 8.75 trillion won, by applying the newly calculated re-procurement cost per unit in 2019. Bridges and tunnels using the new evaluation method were evaluated to be higher than the existing evaluation methods, because the current damaged condition of the facilities was reflected in the valuation. It was concluded that the proposed method is more objective and reliable than the current evaluation methods.

PURPOSES: This study aims to evaluate the resistance to chemical attack of combined organic and inorganic hybrid mortars as the repair materials (i.e., HRM mortar) used for concrete road facilities through a comparison with mortars made from cement repair materials (i.e., IRM mortar). METHODS: Inorganic materials used as a binder and two mineral fillers were adopted to produce HRM mortars. The ratio of the main resin versus the hardener was fixed at 2:1. For comparison, IRM mortars made of cement repair materials were also manufactured. The mortars were exposed to chemical solutions, such as NaCl, MgSO4, Na2SO4, and H2SO4, with the same concentration of 5% after 7 days of curing. The compressive strength, compressive strength loss, mass ratio, and relative bulk density of the mortar samples exposed to the chemical solutions were measured at predetermined periods. In addition, a scanning electron microscope observation was performed to evaluate the microstructures and the products formed by the chemical reaction of the mortar samples. RESULTS : As a result, the resistance to chemical attack of the HRM mortars was found to be much better than that of the IRM mortars, regardless of the types of attacking sources. This finding implies that HRM is a highly promising and versatile material because of its excellent resistance to chemical attack. CONCLUSIONS: The application of the combined organic and inorganic hybrid mortars is a possible option for repair of concrete road facilities exposed to aggressive environments.

PURPOSES: The objective of this study is to evaluate the durable performance of combined organic and inorganic hybrid mortar as repair material (HRM mortar) for concrete road facilities via comparison with that of cement repair materials (IRM mortar). METHODS : To produce HRM mortars, inorganic materials as binder and 2 mineral fillers were adopted. The ratio of main resin versus hardener was fixed at 1:2. For comparison, IRM mortars made with cement repair materials were also manufactured. Compressive, flexural, and bonding strengths were measured at predetermined periods. For durability assessment, the scaling resistance, freezing & thawing resistance, rapid chloride penetration resistance, and acid attack resistance of those mortars were experimentally monitored. RESULTS: The durability performances of HRM mortars, especially with respect to freezing & thawing, rapid chloride penetration and acid attack, were identified to be much better than those of IRM mortars. This result implies that HRM is a highly promising and versatile material because of its excellent durability. CONCLUSIONS: It is concluded that the application of the combined organic and inorganic hybrid mortars is possibly an option for the repair of concrete road facilities exposed to aggressive environments.

PURPOSES : The objective of this study is to evaluate the performance of combined organic and inorganic hybrid mortar used as repair materials (UM mortar) for concrete road facilities by comparison with cement repair materials (RM mortar). METHODS: In order to produce UM mortar, four different levels of inorganic materials were adopted and the ratio of main resin to hardener was fixed at 1:2. For comparison, RM mortar made with cement repair materials was also produced. Fluidity, strength characteristics, length change, and freezing-thawing resistance of the mortars were measured at the predetermined periods. In addition, the microstructures of the mortars was performed on the 28-day mortar samples to examine the properties of the interfacial transition zone (ITZ). RESULTS : It was observed that the mechanical properties, except for compressive strength, and freezing-thawing resistance of UM mortars were much better than those of RM mortar. Furthermore, showing a densified ITZ properties on the UM mortars from the microstructural observation, the usage of UM mortars exhibited a beneficial effect on the enhancement of mortar properties. CONCLUSIONS: It is concluded that the application of combined organic and inorganic hybrid mortars is a possible option for the repair of deteriorated concrete road facilities.

PURPOSES :The purpose of this study is to perform a reliability analysis of the proposed wind load combination which governs the design of support structures of subsidiary road facilities, and to evaluate whether the target reliability of the design is satisfied.METHODS :The statistical estimation method is applied and the design period of the support structure is used to obtain the statistical property of the wind load. In addition, the statistical properties of the strength of support structures are obtained from a literature review and simulation study. Actual support structures are designed by the proposed load combination and are used as the examples to examine if the target reliability is obtained.RESULTS :The result of the reliability analysis performed by using the statistical properties of load and resistance for the support structure in this study indicates that the proposed wind load combination satisfied the target reliability index of the design. Also, the convenience of the design is achieved by adopting the same design wind velocity given in the bridge design code by applying the wind velocity ratio defined for the design period of the support structure.CONCLUSIONS :It is presented that the design using the wind load combination proposed in this study achieved the target reliability index and the design wind load for different design periods can be conveniently defined by applying the velocity ratio proposed in this study.

Recently, the damage caused by typhoons and strong winds frequently displayed according to world climate change tends to be increasing. In the case of soundproof / windproof wall installed on the road, frequent occurrence does function for damage due to strong wind. As a result, in this study, strong wind fragility evaluation was performed to predict the degree of damage of strong winds of soundproof / windproof walls. We were conducting research focusing on the destruction mode in which the overall destruction of the sound barrier caused by the destruction of the aluminum frame occurs. Three node bending experiments were conducting for grasping the material properties of a soundproof wall aluminum frame that is currently being constructed on a road. Based on the results of this experiment, the resistance performance of the target structure was calculated, the frame breakage was selected as the limit state, and the wind load acting on the simplified soundproof wall model was measured using the Monte Carlo model model technique to measure.From now on, through the additional study, it will be necessary to proceed with a more accurate evaluation of the safety against strong windsof the soundproof wall structure using the vulnerability evaluation execution and the setting of the limit state.This study is expected to be the basic data of the study on prediction technique of wind - induced damage of soundproofing and windshield walls in the future.

PURPOSES: An conventional method for electric power generation is converting thermal energy into mechanical energy then to electrical energy. Due to environmental issues such as global warming related with CO2 emission etc., were the limiting factor for the energy resources which resulting in extensive research and novel technologies are required to generate electric power. Thermal energy harvesting using thermoelectric generator is one of energy harvesting technologies due to diverse advantages for new green technology. This paper presents a possibility of application of the thermoelectric generator、s application in the direct exchange of waste solar energy into electrical power in road space. METHODS : To measure generated electric power of the thermoelectric generator, data logger was adopted as function of experimental factors such as using cooling sink, connection methods etc. Also, the thermoelectric generator、s behavior at low ambient temperature was investigated as measurement of output voltage vs. elapsed times. RESULTS: A few temperature difference between top an bottom of the thermoelectric generator is generated electric voltage. Components of an electrical circuit can be connected in various ways. The two simplest of these are called series and parallel and occur so open. Series shows slightly better performance in this study. An installation of cooling sink in the thermoelectric generator system was enhanced the output of power voltage. CONCLUSIONS : In this paper, a basic concepts of thermoelectric power generation is presented and applications of the thermoelectric generator to waste solar energy in road is estimated for green energy harvesting technology. The possibility of usage of thermoelectric technology for road facilities was found under the ambient thermal gradient between two surfaces of the thermoelectric module. An experiment results provide a testimony of the feasibility of the proposed environmental energy harvesting technology on the road facilities.

PURPOSES : The purpose of this study is to assess removal efficiency of non-point pollutants and applicability for non-point pollutant reduction facilities by conducting the demonstration project operation. METHODS : In order to analyze removal efficiency of non-point pollutants for facilities such as a grassed swale, a small constructed wetland, a free water surface wetland, a horizontal sub-surface flow wetland, and a sand filtration, the field data including specifications of facilities, rainfall, inflow and runoff rainfall effluent etc. was acquired after occurring rainfall events, and the acquired data was analyzed for removal efficiency rate to assess road non-point pollutants facilities using event mean concentration (EMC) and summation of load (SOL) methods. RESULTS: The results of analyzing rainfall effluent, non-point pollutant sources showed that total suspended solid (TSS), chemical oxygen demand (COD), biochemical oxygen demand (BOD), total nitrogen (TN), total phosphorus (TP), chrome (Cr), zinc (Zn), and lead (Pb) can be removed through non-point pollutant reduction facilities by 60.3% ~ 100%. Especially removal efficiency of TSS, COD and BOD is relatively higher than removal efficiency of other non-point pollutant sources in all kind of non-point pollutant facilities. CONCLUSIONS : Based on the result of this study, even though natural type of non-point pollutant reduction facilities for roads occupy small areas comparing with drainage basin areas, most of non-point pollutant sources would be removed through the facilities.

This study carried out real car crash simulation of composite post structures for road facilities. The effects of different material properties of composites for various parameters are studied using the LS-DYNA finite element program for this study. In this study, the existing finite element analysis of steel post structures using the LS-DYNA program is further extended to study dynamic behaviors of the structures made of various composite materials. The numerical results for various parameters are verified by comparing different models with displacements and stress distribution occurred in the post and car.

선진국의 기본 요건들 중 하나는 잘 정비된 교통인프라라 할 수 있을 것이다. 이러한 교통안전시설에 대해 해외에서는 각종 교통안전시설에 대해 객관적인 상태평가를 기초로 하여 시설을 관리하는 자산관리(Asset Management)측면에서 시설을 관리하고 있는 추세이다. 이 중 도로관련 각종 안전시설은 매우 다양하며, 기능 또한 매우 중요하기 때문에 이들에 대한 설치 규정 및 지침을 제정하고 있다. 그러나 설치기준 및 지침이 있음에도 불구하고, 각 시설이 기준에 부합되게 설치되지 않아 오히려 도로이용자에게 불편함 뿐 아니라, 안전에도 악영향을 끼치고 있다. 본 연구에서는 다양한 도로안전시설 중 도로의 설계(운영)속도 및 기하구조에 따라 설치 간격 및 높이들이 규정화 되어있는 시설에 대해 라인스캔카메라를 이용, 이를 신속하게 측정 가능한 영상분석 모델을 개발하였다. 또한 이를 체계적으로 분석할 수 있는 프로그램을 개발하여 현장에 적용하였으며, 그 결과 매우 정확하게 시설의 크기와 설치간격을 신속하게 측정할 수 있었다.