Fecralloy coating layer with large surface area is suitable for use as a filter media for efficient removal of hot gaseous pollutants exhausted from combustion processes. For uniform preparation of a Fecralloy coating layer with large surface area and strong adhesion to substrate, electrospray coating and thermal treatment processes are experimentally optimized in this study. A nano-colloidal solution with 0.05 wt% Fecralloy nanoparticles is successfully prepared. Optimized electrospraying conditions are experimentally discovered to prepare a uniform coating layer of Fecralloy nanocolloidal solution on a substrate. Drying the electrospray coated Fecralloy nano-colloidal solution layer at 120oC and subsequent heating at 600oC are the best post-treatment for enhancing the adhesion force and surface roughness of the Fecralloy coating layer on a substrate. An electrospray coating system, consisting of several multi-groove nozzles, is also experimentally confirmed as a reasonable device for uniform coating of Fecralloy nano-colloid on a large area substrate

This study investigated the effect of high concentration of free ammonia on microalgal growth and substrate removal by applying real wastewater nitrogen ratio. To test of this, the conditions of free ammonia 1, 3, 6, 9, 12, 15 mg-N/L are compared. After 3 days of incubation, algal growth of Chlorella vulgaris and carbon removal rate are respectively lower in the reactors of FA 12, 15 mg-N/L compared to the others. This indicates that the high concentration of free ammonia, in this case, above 12 mg-N/L, has negative effect on algal growth and metabolic activity. Also, high concentration of free ammonia causes the proton imbalance, ammonium accumulation in algae and has toxicity for these reasons. So, we have to consider free ammonia in applying the microalgae to wastewater treatment system by the way of diluting wastewater or controlling pH and temperature.

Spent mushroom substrate (SMS) has generally been used for the manufacture of animal feed and production of bio fuel. Limited research has been conducted in the utilization of SMS as a co-material for composting. Therefore, the main purpose of this study was to evaluate the feasibility of composting vegetable waste mixed with various ratios of SMS (30, 40, and 50%). The results showed that the C/N ratio decreased when both sawdust (from 22.0~28.8 to 17.7~20.4) and SMS (from 18.5~19.5 to 12.7~16.8) were applied for composing, owing to increased contents of nitrogen. A maturity test conducted using mechanical (Solvita) and germination tests revealed that both sawdust (92.0~101.9%) and SMS (87.8~89.2%) satisfied a criteria of maturity standard (70%). A correlation analysis between compost maturity and its chemical properties revealed that the C/N ratio and pH were the most dominant parameters for compost maturity. Overall, SMS could be utilized as a compost material and especially, vegetable waste mixed with SMS could provide sufficient nutrients for crop growth.

This study was conducted to investigate the effects of Kojongsi persimmon peels as a mushroom substrate on antioxidant activity of Pleurotus eryngii. The Pleurotus eryngii was growth on the medium with 0, 5, 10, 15, 20, 30, 40, 50% Kojongsi persimmon peels. The Pleurotus eryngii was extracted into ethanol and their antioxidant activities were analyzed. The total polyphenol content was highest in the 20% Kojongsi persimmon peels treatment (40±0.38 mg of gallic acid equivalents/100 g) than 0% Kojongsi persimmon peels treatment (21 ±0.18 mg of gallic acid equivalents/100 g). The 20% Kojongsi persimmon peels treatment showed better DPPH scavenging activity (36.81±0.23% at 1 mg/ml), ABTS scavenging activity (39.03±0.10% at 1 mg/ml) and reducing power (0.3±0.10% at 1 mg/ml) than 0% Kojongsi persimmon peels treatment and another extract ones. Overall, total polyphenol content and antioxidant activities of extracts from Pleurotus eryngii was increased dose dependently and 20% Kojongsi persimmon peels treatment was showed better total polyphenol content and antioxidant activities than 0% Kojongsi persimmon peels treatment and another extract ones.

Sawdust bag cultivation was performed to understand the effect of different sawdust substrate (Quercus mongolica, Q. acutissima, Q. serrata, Q. aliena, and Q. variabilis) on the eight variety of shiitake (Poongnyunko, SANJO 701, Mori 436ho, Sanlim 10ho, Chilha 6ho, Yoogiro, Baekwhahyang, Charmaram). After inoculation, sawdust substrate block (2 kg) was cultivated at 22°C for 120 days. During the production period, the temperature was adjusted to 18°C and the relative humidity at 90%. The yield was calculated based on the fruit bodies from the first, second and third flush. As results, Poongnyunko yielded 455 g on the substrate, Q. serrata, 378 g on Q. aliena, and 333 g on Q. variabilis. Chilha 6ho yielded 304 g on Q. mongolica and Charmaram yielded 245 g on Q. acutissima. The average weight of mushrooms from Charmaram was 40-45 g on all five substrates and Q. variabilis was the best among them. In terms of phenotypic characteristics, Chilha 6ho was generally better than the others. Charmaram, Poongnyunko, Sanlim 10ho also had good characteristics. Mori 436ho, Yoogiro, Baekwhahyang developed for log cultivation showed lower yield compared to the varieties for sawdust bag cultivation. Keywords : Lentinula edodes (Shiitake), Querqus spp., Saw-dust bag culture, Yield

The Kojongsi persimmon peels is byproduct after production of dried persimmon. This study was conducted to investigate optimal mixing ratio of Kojonsi persimmon peels as a substrate for cultivation of Pleurotus eryngii. The primary nutritive material of substrate for Pleurotus eryngii was corncob, soybean meal, beet pulp, ground corn and bran. Five to forty percent of persimmon peels were mixed with primary nutritive materials as new substrate. The chemical properties of substrate mixed with Kojongsi persimmon peels was similar to the mixture without Kojongsi persimmon peels in T-C, T-N, C/N ratio, and other nutrients. Mycelial growth time on medium with 5 to 30% persimmon peels was similar to the control without persimmon peels as 27 days but that on medium with 40% and 50% persimmon peels was delayed for 10 days. The time of pinhead formations in medium with 5 to 30% persimmon peels was 12 days, the growth time to harvest was 6 days. These results were similar to those of the control without persimmon peels. The sizes of pileus of treatments with 5 to 30% persimmon peels were tend to be smaller compared with the control. The length of stipe of 10% persimmon peels treatment was 80 mm which was shorter than that of the control with 120 mm.

Graphene has shown exceptional properties for high performance devices due to its high carrier mobility. Of particular interest is the potential use of graphene nanoribbons as field-effect transistors. Herein, we introduce a facile approach to the fabrication of graphene nanoribbon (GNR) arrays with ~200 nm width using nanoimprint lithography (NIL), which is a simple and robust method for patterning with high fidelity over a large area. To realize a 2D material-based device, we integrated the graphene nanoribbon arrays in field effect transistors (GNR-FETs) using conventional lithography and metallization on highly-doped Si/SiO2 substrate. Consequently, we observed an enhancement of the performance of the GNRtransistors compared to that of the micro-ribbon graphene transistors. Besides this, using a transfer printing process on a flexible polymeric substrate, we demonstrated graphene-silicon junction structures that use CVD grown graphene as flexible electrodes for Si based transistors.

Dy3+ and Eu3+-codoped SrWO4 phosphor thin films were deposited on sapphire substrates by radio frequency magnetron sputtering by changing the growth and thermal annealing temperatures. The results show that the structural and optical properties of the phosphor thin films depended on the growth and thermal annealing temperatures. All the phosphor thin films, irrespective of the growth or the thermal annealing temperatures, exhibited tetragonal structures with a dominant (112) diffraction peak. The thin films deposited at a growth temperature of 100 oC and a thermal annealing temperature of 650 oC showed average transmittances of 87.5% and 88.4% in the wavelength range of 500-1100 nm and band gap energy values of 4.00 and 4.20 eV, respectively. The excitation spectra of the phosphor thin films showed a broad charge transfer band that peaked at 234 nm, which is in the range of 200-270 nm. The emission spectra under ultraviolet excitation at 234 nm showed an intense emission peak at 572 nm and several weaker bands at 479, 612, 660, and 758 nm. These results suggest that the SrWO4: Dy3+, Eu3+ thin films can be used as white light emitting materials suitable for applications in display and solid-state lighting.

The influence of NiCrAlY bond coating on the adhesion properties of an Fe thermal coating sprayed on an Al substrate was investigated. By applying a bond coat, an adhesion strength of 21MPa was obtained, which was higher than the 15.5MPa strength of the coating without the bond coat. Formation of cracks at the interface of the bond coat and the Al substrate was suppressed by applying the bond coat. Microstructural analysis of the coating interface using EBSD and TEM indicated that the dominant bonding mechanism was mechanical interlocking. Mechanical interlocking without crack defects in the coating interface may improve the adhesion strength of the coating. In conclusion, the use of an NiCrAlY bond coat is an effective method of improving the adhesion properties of thermal sprayed Fe coatings on Al substrates.

양파 정식기 작업에 적합한 상토 개발을 위해 원예용 유기질 주재료(피트모스, 코이어)의 적합성을 조사했다. 유기질 재료를 무기질 재료(황토 등)와 혼합하여, 묘 출현율, 생육 및 기계정식 적응 특성 등을 조사하였다. 조사 결과 피트모스 혼합 처리구, 코이어 혼합 처리구 모두 묘 출현율, 생육 및 상토 용적밀도에서 유사했으나, 피트모스 혼합 처리구가 코이어 혼합 처리구에 비해 더 높은 상토 응집성을 보였다. 피트모스 혼합 상토의 높은 응집성은 양파 묘 정식 시 뿌리부 무게 증가 등의 효과를 가져와서 정식기 작업 효율성을 증진시키는데 도움을 줄 수 있을 것이라고 생각된다. 이러한 이유로, 양파 정식기 작업에 적합한 상토 개발 시 피트모스를 유기질 주재료로 선정하는 것이 적합하다고 최종 판단하였다.

20 μm의 얇은 폴리에스터(polyester) 부직포 상에 폴리술폰(polysulfone) 고분자 지지체를 제조하였다. 폴리아미드 계면 중합이 일어날 폴리술폰 표면에 폴리 실록산 층이 형성될 수 있도록 실란 화합물을 중합하여 폴리실록산 지지체를 제조하였다. 얻어진 복합막 지지층에서 MPD 수용액과 TMC 유기용액을 계면 중합을 실시한 결과 정삼투 분리용 복합박막을 얻을 수 있었다. FE-SEM을 이용하여 지지층의 구조가 sponge-like 구조임을, EDX를 통하여 폴리실록산이 표면에 한하여 분포됨을 확인하였으며 1 M NaCl 유도용액하에서의 FO-mode 유량 이 79.2 - 117 LMH로 향상되었으며 RSF값은 2.12 - 7.97 GMH로 유지함을 확인할 수 있었다.

비순환식 고형배지경에서 배액이 토양과 지하수 오염을 발생시키는 문제를 해결하고자 그동안 연구된 데이터를 바탕으로 배액 최소화 재배방식을 확립을 위해 본 연구는 토마토 코이어 수경재배농가 시설에서 FDR 센서, 적산일사량 센서 및 타이머를 이용하여 토마토를 재배하며 급배액량, 생육 및 생산량을 비교하였다. 정식 후 88일까지 일일 식물체당 평균 급액량은 처리구에 따른 큰 차이가 없었다. 하지만 정식 후 88일 이후 107일 까지 TIMER, FDR, IR 제어구 각각의 일일 식물체당 평균 급액량은 IR(2125mL) > TIMER(2063mL) > FDR(1983mL) 수준이었고 108일부터 120일 까지는 IR(2000mL) > TIMER(1664mL) > FDR(1500mL) 수준 이었다. 배액률은 TIMER 제어구의 경우 5~12%, FDR 센서 제어구의 경우 0~7%, IR 제어구의 경우 12~19% 수준으로 IR > TIMER > FDR 순이었다. 정식 후 88일 이후부터는 FDR과 IR 제어구가 급액량에 상이한 결과를 보였는데, 이는 재배 후기 즉, 5월 20일 이후 (정식 후 94일) 누적일사량의 증가로, IR 제어구에서는 급액이 증가된 반면 FDR 센서 처리구는 적심 이후 30일이 경과된 6월 2일경부터 IR 제어구 보다 일일 급액량이 평균 500mL 적게 공급된 결과이다. 식물체 생육 및 상품과 수량도 급액방식에 따른 통계적 유의차는 없었지만, 당도는 FDR 처리구에서 TIMER 처리구에 비해 약 11%, IR 처리구에 비해 약 18% 높았다.

To minimize cultivation costs, prevent insect-pest infestation, and improve the production efficiency of thermophilic mushrooms, plant substrates obtainedfrom local areas in Cambodia were used for production of both spawn and mushrooms. In this experiment, different sawdusts different organic wastes and grain ingredients and analyzed for improvement of spawnproduction efficiency. Four thermophilic mushroom species, Pleurotus sajor-caju (oyster mushroom, Sambok), Ganoderma lucidum (deer horn shaped), Auricularia auricula (ear mushroom), and Lentinula edodes (shiitake), were used to identify efficient new substrates for spawn and mushroom production. Although the mycelia in the rubber tree sawdust medium showed a slightly slower growth rate (10.9 cm/15 days) than mycelia grown in grains (11.2 cm/15 days in rice seeds), rubber tree sawdust appeared to be an adequate replacement for grain spawn substrates. Th findings indicate that rubber tree sawdust, sugarcane bagasse, and acaciatree sawdust supplemented with rice bran and calcium carbonate could be new alternative the substrates for . Although sugarcane bagasse and rubber tree sawdust showed similarly high biological efficiencies (BE) of 60% and 60.8%, respectively, acacia tree sawdust exhibited relatively a low biological efficiency of 22.4%. However, it is expected that acacia sawdust has potential for the mushroom cultivation when supplemented with currently used sawdust substrates in Cambodia, because of its relatively low price. The price of the sawdust (20 kg sawdust= 6500 Riel or 1.6 USD) currently used was 6.5 times higher than the price of acacia sawdust (201000 Riel or 0.25 )USD). Therefore, utilization for acacia sawdust for mushroom cultivation could become feasible as it would reduce by producing costs of mushrooms in rural areas of Cambodia.

In this study, we investigated the effect of annealing conditions on the ferromagnetic resonance(FMR) of yttrium iron garnet (Y3Fe5O12, YIG) thin film prepared on gadolinium gallium garnet (Gd3Ga5O12, GGG) substrate. The YIG thin films were grown by rf magnetron sputtering at room temperature and were annealed at various temperatures from 700 to 1000 ˚C. FMR characteristics of the YIG thin films were investigated with a coplanar waveguide FMR measurement system in a frequency range from 5 to 20 GHz. X-ray diffraction(XRD) and X-ray photoelectron spectroscopy(XPS) were used to characterize the phase formation, crystal structure and composition of the YIG thin films. Field dependent magnetization curves at room temperature were obtained by using a vibrating sample magnetometer(VSM). The FMR measurements revealed that the resonance magnetic field was highly dependent on the annealing condition: the lowest FMR linewidth can be observed for the 800 ˚C annealed sample, which agrees with the VSM results. We also found that the Fe and O composition changes during the annealing process play important roles in the observed magnetic properties.

산느타리버섯 ‘호산’, ‘화산’ 품종을 대상으로 강원도농 업기술원에서 개발한 배지와 농가에서 사용하는 배지를 가지고 수확후배지 첨가율에 따른 생육 및 수량특성 조사 결과, 강원도에서 개발한 배지에서는 호산품종에서는 대조구에 비해 수량 차이가 거의 없었고, 화산에서는 20% 까지 수량이 증가하였다. 농가에서 사용하는 배지에서는 호산품종은 20%까지 수량 차이가 없었고 30%에서 다소 적어진 것으로 나타났다. 화산품종에서는 첨가율이 높을 수록 수량이 점차 떨어지는 경향이 나타났다. 이 시험연 구를 통해 산느타리버섯 수확후배지를 20%까지 재사용한 다면 생산비 절감 뿐만 아니라 폐배지 폐기처리 비용 절 감 등 농가소득에 기여할 것으로 여겨진다.

본 연구는 잎새버섯 병 재배시 적합한 배지조성비율을 구명하고자 수행되었다. 배지조성은 참나무톱밥: 옥수수피: 건비지를 건물중량 비 율로 T1처리(67:11:22), T2처리(68:15:17), T3처리(74:14:12)의 3처리를 두고 시험한 결과, 발이율은 T1처리에서 72.6%, T2처리에서 72.1%로 두 처리 간 유의적 차이가 없었으나 T3처리에서는 65.8%로서 다른 두 처리에 비하여 낮았다. 이병률은 T2처리에서 4.1%, T3처리에서 3.7%인데 비하 여 T1처리에서는 9.8%로 가장 높았다. 수확률은 T1처리 에서 64.1%, T3처리에서 63.6%인데 비하여 T2처리에서 는 70.5%로 가장 높았다. 병당 자실체 중량은 T1처리에 서 85.5 g, T2처리에서 83.3 g으로 두 처리 간 유의적 차 이가 없었으나 T3처리에서는 72.4 g으로 다른 두 처리에 비하여 낮았다. 입병 수 10,000병 기준으로 재배 시 수량은 T2처리에서 587 kg으로 T1처리 및 T3처리에 비하여 각각 7% 및 28%가 높았다. 따라서 잎새버섯 병재배 시 적합한 배지조 성비율은 건조중량비율로 참나무톱밥: 옥수수피: 건비지 가 68:15:17인 것으로 나타났다.

We report on the succesful fabrication of ZnO nanorod (NR)-based robust piezoelectric nanogenerators(PNGs) by using Cu foil substrate. The ZnO NRs are successfully grown on the Cu foil substrate by using all solutionbased method, a two step hydrothermal synthesis. The ZnO NRs are grown along c-axis well with an average diameterof 75~80 nm and length of 1~1.5 µm. The ZnO NRs showed abnormal photoluminescence specrta which is attributedfrom surface plasmon resonance assistant enhancement at specific wavelength. The PNGs on the SUS substrates showtypical piezoelectric output performance which showing a frequency dependent voltage enhancement and polarity depen-dent charging and discharging characteristics. The output voltage range is 0.79~2.28 V with variation of input strain fre-quency of 1.8~3.9 Hz. The PNG on Cu foil shows reliable output performance even at the operation over 200 timeswithout showing degradation of output voltage. The current output from the PNG is 0.7 µA/cm2 which is a typical out-put range from the ZnO NR-based PNGs. These performance enhancement is attributed from the high flexibility, highelectrical conductivity and excellent heat dissipation properties of the Cu foil as a substrate.

Hypocreales entomopathogenic Beauveria bassiana and Metarhizium anisopliae are well-known biological control agents worldwide and have high potential in industrialization. However their thermo-susceptibility limits long-term storage under high temperature conditions and high insecticidal activity after application to target pests. Herein we isolated highly virulent isolates, B. bassiana JEF006 and JEF007 and M. anisopliae JEF003 and 004, and produced in three grains, as substrates for solid cultures, followed by thermotolerance assays to compare the potential of the three substrates. The JEF isolates were exposed to dry and wet heat at 50°C and overall conidia were more stable under dry heat condition rather than wet heat. Of the three grains, Italian millet was superior to the other grains in the production of thermotolerant conidia. Additionally Italian millet did not severely aggregated, which enabled air to penetrate into the substrate well compared to the sorghum and millet. JEF isolates were more thermotolerant when they were kept in oil conditions. The conidia of JEF 007 and 003 wild type and AtMT-based generating random mutants were subjected to SDS-PAGE. A significant relationship between conidial thermotoelrance and detected proteins was observed. This work suggests that Italian millet can be used as an effective substrate to produce more thermotolerant conidia, thus maintaining viability for long times under unfavorable environment and biological activity against target pests.