Chelate resin is a resin that has an exchange group which can form chelates with various metal ions. It shows higher selectivity for metal ions than ion exchange resin and can selectively remove characteristic metal ions. In an aqueous solution containing metal ions, chelate resin can adsorb specific metal ions, and the separated chelate resin can desorb the adsorbed metal ions by changing temperature or pH, so chelate resin has the advantage of being reusable. Chelate resin has been used industrially as an adsorbent to adsorb and separate heavy metal ions in wastewater, and is also used for the purpose of recovering precious or rare metals contained in industrial wastewater or industrial waste. Against this background, there is a need to develop chelate resins with higher adsorption capacity. Acrylic fiber is defined as a man-made fiber made from a linear synthetic polymer with fiberforming ability consisting of more than 85% acrylonitrile. It is a man-made fiber that is often used as a substitute for wool because it has good thermal insulation properties like wool and is warm and soft to the touch. It is a fiber rich in cyano groups due to its high content of acrylonitrile, and has the advantage of being able to be used as a variety of functional fibers through modification of cyano groups. In this study, the amination reaction of acrylic fiber was performed using diethylenetriamine, and the adsorption characteristics for metal ions were evaluated according to the reaction conversion rate. In order to improve the amination efficiency, 400 kGy was irradiated using a 2.5 MeV electron beam accelerator, and through this, the crosslinking rate of acrylic fiber was able to be improved up to 80%. Water and ethanol were used as cosolvents for the amination reaction in a ratio of 60/40 vol/vol, respectively, and a reaction yield of 178% was obtained after 120 minutes of reaction. Using the chelate resin prepared in this way, the adsorption performance for metal ions was evaluated through Atomic Absorption Spectrometry analysis.

High level radioactive waste (HLW) final disposal repository is faced thermos-hydro-mechanical - radioactive condition because it is placed over 500 m in depth and waste emits decay heats for decades. Repository will be operated around 100 years and will be closed after all the wastes are disposed. The integrity of engineered barriers including buffer, backfill, concrete plug and canister and natural barrier (natural rock mass) will be stood during operating periods. Monitoring sensors for concrete and rock mass is conducted using piezo based sensors such as accelerometer or acoustic emission (AE) sensors. Typical accelerometer for harsh conditions is commonly expensive and data/power cable can be a potential groundwater inflow and nuclide outflow path. The fiber optic accelerometer whose data and power cable are united and has limited volume. Therefore, it can be a potential alternative sensor of piezo based sensors. The temperature limits and accelerated tests for fiber optic sensors are conducted. Most of sensors gives a malfunction around 130°C. The results of these experimental tests give a possibility of communications in compacted bentonite buffer and will be utilized for the design of monitoring systems for the repository.

During PIV (Physical Inventory Verification), the IAEA has been inspecting the CANDU-Type spent fuels using an optical fiber-based scintillation detector. KINAC has developed a new verification instrument to deal with problems of the existing one such as low sensitivity, heavy and large dimension, and inconvenience-in-use. Our previous studies focused on how to develop the new instrument and had not included its performance tests. Field tests were carried out recently at Wolsung unit 4 to evaluate performance of the existing and new instruments. The objective of this paper is to discuss background noise produced in the optical fiber signal cable itself. The verification equipment for the CANDU-type Heavy Water Reactor spent fuels uses a scintillation detector to bond a scintillation material to the end of an optical signal cable. At this time, the radiation signal obtained by a data acquisition system is the signal generated from the scintillator (p-terphenyl organic scintillator) and the optical signal cable ; The signal produced in the optical cable itself is background noise to degrade the spent fuel verification equipment. To characterize the background radiation noise, the spent fuel bundles at Wolsung Unit 4 were measured using the optical fiber cable without the radiation scintillator. This signal is generated by reaction of the optical cable and the radiation emitted from the spent fuel. From experimental results, it was observed that the background noise signal of the optical cable increased as the optical cable went down in the downward direction, because the cable length irradiated by the radiation increased with the optical cable area in the spent fuel storage pool. Difference in the background noise signal was dependent on the location of the vertical direction and the signal of the new optical cable was up to about 5 times higher than that of the existing cable. While, the new cable has the cross-section area about 3.2 times larger than the old cable. Our past studies showed that total signal amplitude – sum of signals generated from the scintillator and optical fiber - of the new verification instrument was at least about 15 times greater than that of the existing one. Considering the total signal and background noise signal, from this measured results, it was confirmed that the scintillator characteristics – in particular, light output and decay time – has a dominant impact on the signal sensitivity of the newly developed instrument. More details will be discussed at the conference.

PVA 섬유 보강 시멘트 복합체는 매우 복잡한 미세구조를 가지고 있으며, 재료의 거동을 정확히 평가하기 위해서는 미세구조 특성 을 반영하여 실제 실험과 시너지효과를 내며 효율적인 재료 설계를 가능하게 하는 해석 모델의 개발이 중요하다. PVA 섬유 보강 시멘 트 복합체의 역학적 성능은 PVA 섬유의 방향성에 큰 영향을 받는다. 그러나 마이크로-CT 이미지로부터 얻은 PVA 섬유의 회색조 값 을 인접한 상과 구분하기 어려워, 섬유 분리 과정에 많은 시간이 소요된다. 본 연구에서는 섬유의 3차원 분포를 얻기 위하여 0.65μm3 의 복셀 크기를 가지는 마이크로-CT 이미지 촬영을 수행하였다. 학습에 사용될 학습 데이터를 생성하기 위해 히스토그램, 형상, 그리 고 구배 기반 상 분리 방법을 적용하였다. 본 연구에서 제안된 U-net 모델을 활용하여 PVA 섬유 보강 시멘트 복합체의 마이크로- CT 이미지로부터 섬유를 분리하는 학습을 수행하였다. 훈련의 정확도를 높이기 위해 데이터 증강을 적용하였으며, 총 1024개의 이미지 를 훈련 데이터로 사용하였다. 모델의 성능은 정확도, 정밀도, 재현율, F1 스코어를 평가하였으며, 학습된 모델의 섬유 분리 성능이 매 우 높고 효율적이며, 다른 시편에도 적용될 수 있음을 확인하였다.

이 연구는 코르크보드를 보강하여 건축부재 및 놀이기구의 안전부재 등으로 폭넓게 활용할 것을 목적으로 코르크보드의 중층에 금속, 유리섬유, 탄소섬유를 삽입하여 보강한 3종의 코르크복합보드를 제조하였고, 코르크복합보드의 수분흡수에 따른 치수안정성 및 접착층 박리성능을 조사하였다. 코르크복합보드의 흡수율은 0.37% - 0.45%의 범위에 있었고, 코르크보드에 비해 0.61배 - 0.74배의 낮은 값을 나타내었다. 코르크복합보드의 두께팽창률은 0.92% - 1.58%의 범위에 있었고, 코르크보드 보다 1.4 - 2.4배의 높은 값을 나타내었다. 그러나 이 값들은 일반 목질보드보다 현저히 낮았고, KS규격의 12%이하를 하회하는 것이 확인되었다. 코르크복합보드의 준내수 및 내수침지박리시험후의 접착층박리율은 0%로 전혀 접착층의 박리가 일어나지 않아 우수한 내수성을 나타내었고, 흡수율과 흡수두께팽창률은 상온침지에 비해 다소 증가하였으나, 목질보드에 관한 KS규격을 하회하는 우수한 치수안정성을 나타내는 것이 확인되었다.

The cucumber flower does’t seem to be supplying enough nectar and pollen to the natural enemies. Among the natural enemies that can be used in the cucumber greenhouse, especially Orius laevigatus may require flower nectar and pollen for settlement and reproduction. In our previous study, we selected basil as a natural enemy banker plant. Using this, the effect of thrips control in cucumber greenhouse was examined. The major pests of cucumber in 2023 were Aphis gossypii, Frankliniella occidentalis, Thrips palmi and Trialeurodes vaporariorum. A. gossypii occurred most frequently, and the next occurred pests were F. occidentalis and T. palmi. The densities of O. laevigatus remained stable on basil banker plants. After releasing O. laevigatus and adding the basil banker plants, the densities of T. palmi were kept low at less than 3 per leaf, and the densities of F. occidentalis were kept low at less than 10 per 3 flowers but increased slightly since late May. As a result, the density of thrips during cucumber cultivation was effectively suppressed after the use of natural enemies.

The use of hanging scaffolding for exterior wall painting and cleaning in building construction and maintenance carries the inherent risk of fall accidents. While periodic rope replacement is crucial for preventing accidents resulting from rope breakage, current regulations lack specificity in determining appropriate disposal period for fiber ropes. This study analyzed the tensile strength of the most commonly used PP fiber ropes with different diameters (16 mm, 20 mm) in the domestic construction industry. Additionally, the effect of outdoor exposure was examined by measuring the tensile strength of new ropes and ropes exposing to outdoor conditions for 30 days and 90 days. The results showed that the new ropes and those exposed to outdoor for 30 days met the KS (Korean Standards) criteria for tensile strength. However, a significant decrease in tensile strength was observed in ropes exposed to outdoor for 90 days compared to both the new ropes and those exposed for 30 days. Furthermore, the ropes exposed for 90 days did not meet the KS criteria. These findings indicate the degradation of PP fiber ropes due to UV (Ultra Violet) radiation, highlighting the importance of considering this factor when determining the replacement period for fiber ropes used in scaffolding work.

본 연구에서는 PVA(Poly Vinyl Alcohol)섬유와 GO(Graphene Oxide)를 혼입한 섬유보강 콘크리트(FRC)의 역학적 특성 을 평가하고자 하였다. GO와 PVA 섬유를 동시에 혼입한 FRC 각각의 재료를 단일로 사용하였을 때보다 기대효과가 다소 미흡 하였지만, 각 재료의 하이브리드화로 인장강도가 개선되면서 PVA 섬유 혼입률 0.1∼0.3%과 GO 혼입률 0.025%에서 우수한 효 과를 얻을 수 있었다. 특히 PVA 섬유는 0.3%로 혼합하였을 때 부작용을 최소화하면서 최대의 효과를 보였지만, 적절한 GO 배 합비를 조절할 필요가 있으며 FRC내 GO와 PVA 섬유의 최적배합을 구하기 위한 추가적인 연구가 필요할 것으로 사료된다.

This study aimed to predict the shelf life of black soybean Sunsik to develop a functional labeling system for the product. The Arrhenius equation was used to calculate the shelf life by examining alterations in the dietary fiber and calcium levels of black soybean Sunsik stored at 25, 35, and 50°C for 0, 6, and 12 months. Dietary fiber and calcium analyses were performed according to the experimental methods specified in the Food Code of the Ministry of Food and Drug Safety. Both black soybean Sunsik (BS) and black soybean Sunsik containing nondigestible maltodextrin and calcium lactate (BSN) exhibited an upward trend in dietary fiber content after 12 months of storage, compared to their initial levels. During storage, the phytate in Sunsik degraded, releasing cations that facilitated the formation of new cross-links between pectic acid and middle lamella, which ultimately increased dietary fiber content. Conversely, the calcium contents of both BS and BSN decreased with prolonged storage. Based on these findings, the expected shelf life of BS and BSN was calculated as 15.65 and 28.34 months, respectively.