With changing dietary trends, active research is underway to substitute rice flour for wheat flour, commonly added to various processed foods. This study aimed to explore whether Baromi2, a floury rice incorporated in the production of Sujebi, can effectively replace wheat flour at appropriate levels based on its physicochemical and cooking characteristics. Baromi2 was categorized based on particle size (100, 140, and 200 mesh) and added in proportions of 10% and 20% relative to the weight of wheat flour. As the amount of Baromi2 increased, the protein and lipid content of the mixed flour also increased. Simultaneously, the dough strength decreased as the noodles became thinner, reducing hardness, gumminess, and chewiness. Additionally, a decrease in particle size increased peak viscosity and breakdown viscosity, whereas setback viscosity decreased. When Baromi2 was added at a 10% ratio, it displayed a low cooking loss, demonstrating desirable characteristics for Sujebi and was considered the most suitable proportion for production. These results provide foundational data for developing various rice-processed products using Baromi2, contributing to expanding consumption and enhancing utility.

This study evaluated the physicochemical characteristics of wheat-flour mixed powders and cooking properties of Sujebi based on the addition of ‘Baromi2’ rice flours for increased expansion of rice consumption. The addition rates at which a roll surface sheet was formed were selected as 0, 10, 20, 30, and 50% based on preliminary experiments with 0-90% addition rates of ‘Baromi2’. Results of physicochemical characterization showed that increasing the addition ratio of ‘Baromi2’ rice flour resulted in increased crude ash and crude fat levels, however crude protein and total starch decreased. The L*-value (lightness) increased with increasing addition ratio of ‘Baromi2’ rice flour; in contrast, a*-value (redness), b*-value (yellowness), and particle size decreased. Results of RVA showed that increasing the addition ratio of ‘Baromi2’ rice flour increased the peak, breakdown, and setback. Regarding textural properties, hardness and chewiness values were significantly reduced with increasing addition ratios of ‘Baromi2’ rice flour. Based on these results, a blending ratio of 20% or less of ‘Baromi2’ is considered suitable for producing Sujebi, and this result serves as basic data for the development of processed rice flour products using ‘Baromi2’.

This study investigated the physicochemical properties of protein-fortified rice flour by mixing rice flour (RF) with untreated and fermented plant proteins. Fermented faba bean protein concentrate (FMFP) and chickpea flour (FMCF) were prepared by solid-state fermentation of faba bean protein concentrate (UTFP) and chickpea flour (UTCF) using Bacillus subtilis. FMFP and FMCF exhibited higher crude protein, reducing sugar and starch contents more than their counterparts. The increased rate of essential and branched-chain amino acids in FMFP and FMCF exceeded that of crude protein. Adding plant proteins to RF decreased swelling power (SP) and increased solubility in RF-UTFP and RF-FMFP mixtures, while SP and solubility increased in RF-UTCF and RF-FMCF mixtures. All RF-plant protein mixtures showed higher gelatinization temperature and lower gelatinization enthalpy than RF. Thermal gelation was found in all RF-plant protein mixtures, but the RF-FMCF mixture may form weak and unstable gel structures. The increase in pasting viscosity was minimal for the RF-UTFP and RF-FMFP mixtures but more pronounced for the RF-UTCF and RF-FMCF mixtures. Overall, FMFP may be a potential protein source to supplement the protein deficiency in RF with minimal changes in RF-based foods’ rheological and textural properties.

To develop quality-improved bakery products, the influence of the partial replacement of wheat flour by Artemisia princeps leaf powder (APP) on the quality characteristics of cookies, including antioxidant activities, was investigated. Studies were carried out to evaluate the addition of different percentages of APP on the quality characteristics of cookies prepared by incorporating APP (1-4%) into wheat flour. The incorporation of APP significantly affected the cookies’ physicochemical parameters and sensory acceptance attributes. Such incorporation at different levels significantly reduced moisture content while increasing the cookie dough’s density (p<0.05). The spread ratio, loss rate, L*, and b* values of the cookies decreased, but their hardness and a* value increased significantly with increasing levels of APP substitution (p<0.05). 2,2-Diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azino-bis-3-ethylbenzthiazoline- 6-sulphonic acid (ABTS) radical scavenging activities were significantly increased (p<0.05) with higher APP substitution and were well-correlated. Hedonic sensory results showed that cookies fortified with 2% APP generally received satisfactory and acceptable acceptance scores. Consumers seemed to prefer the cookie texture in terms of chewiness when the samples were softer and lighter but less reddish, whereas taste acceptance may be a dominant factor in overall acceptability.

This study aimed to apply rice flour Baromi 2 (B2) varieties developed by the Rural Development Administration in low-sugar baguette products. To achieve this, baguettes were produced using B2 at 10%, 20%, and 30% levels. As the content of B2 increased, the mixing time decreased, and the dough became sticky. Additionally, the dough fermentation ability was reduced. The finished products showed no significant difference in the external structure with varying B2 contents. However, the crust color containing B2 was darker than that of the control. In color value, the L* value decreased as the amount of added B2 increased, while the a* value and b* value increased. Furthermore, the sensory evaluation revealed that baguettes with a higher amount of B2 had a softer crumb and a crunchy crust, and with 20% substituted for B2, the sample obtained the highest score. From these results, it has been determined that B2 can substitute for up to 20% of wheat flour in bakery products.

Because of recent reports about phosphine resistance problem, development of effective fumigation method to control grain pests became very important. In this study, a chemical treatment, ethyl formate fumigant treatment, and a physical treatment, atmospheric control, were attempted as alternative solutions to this problem. In this study, for CA(Controlled atmosphere) treatment, 99.999% nitrogen was used to create a hypoxic condition with less than 5% oxygen, and for EF, the treatment concentration was 10 mg/L to 80 mg/L. As a result of the study, in CA single treatment, adult insects showed a mortality rate of less than 10% even after 2 weeks of treatment, and pupae and larvae showed a mortality rate 71% and 34%, but eggs showed a mortality rate of 100%. In EF single treatment, adults and larvae showed a 100% mortality rate at 80 mg/L, but eggs showed a 50% mortality rate and pupae were not affected. Considering the results, CA single treatment is not suitable for controlling Tribolium castaneum because of long treatment period, and in the case of EF single treatment, additional researches on longer treatment time is needed.

Insect eggshell and cuticle/exoskeleton play vital roles in protecting them from natural environmental stresses. However, these chitinous cuticular extracellular matrices must be degraded at least in part during embryo hatching and molting/ecdysis periods to accommodate continuous growth all the way to the adult stage. In this study, we investigated the functional importance of groups I and II chitinases, TcCHT5 and TcCHT10, in the turnover of chitinous cuticle during both embryonic and post-embryonic development in Tribolium castaneum. RNAi and TEM analyses revealed that TcCHT10 is required for digestion of chitin in the serosal cuticle for embryo hatching as well as in the old cuticle during post-embryonic molts including larval-pupal and pupal-adult metamorphosis. TcCHT10 appears to be able to substitute for TcCHT5 in all these vital physiological events except for the pupal-adult molting in which TcCHT5 is indispensable for complete digestion of chitin in the old pupal cuticle.

This study aimed to establish the optimal conditions for producing gluten-free noodles by varying the amount of pregelatinized rice flour added to the regular rice flour and investigating their quality characteristics. With an increase in the amount of added pregelatinized rice flour, the brightness of the noodles decreased, and the color became more yellow both before and after cooking. Adding pregelatinized rice flour to the noodles also increased hardness, elasticity, chewiness, stickiness, and adhesiveness. The textures of the two groups of samples (PR-10 and PR-15) were similar to that of the control, indicating comparable structural characteristics. Furthermore, the absence of gluten made it inherently challenging to form gluten-free noodles. Still, adding pregelatinized rice flour improved the processability of the dough, leading to better noodle formation. An optimal addition of 15% pregelatinized rice flour was deemed suitable for optimal noodle formation in gluten-free noodles. This study established blending conditions using pregelatinized rice flour to improve the poor processability of gluten-free noodles. The findings are expected to be valuable for the industry’s future development of gluten-free processed food.

This study investigated the quality characteristics of madeleines prepared using varying amounts of roasted black soybean flour (RBF). The RBF was used to substitute 0% (control group), 20% (RBF-20 group), 40% (RBF-40 group) and 60% (RBF-60 group) of weak flour (WF) in the manufacture of madeleine. The substitution of WF with RBF showed decreased the pH but increased the sugar concentration of the batter (p<0.01). Low lightness (L) and low yellowness (b) were observed in the experimental groups at high ratios of RBF substitution (p<0.05). The experimental groups of madeleines showed higher hardness and chewiness than the control group (p<0.001). The principal component analysis of the RBF- 60 experimental group, which had the highest proportion of RBF, showed that it had relatively strong characteristics with respect to “darkness”, “soybean odor”, “sesame odor”, “grains odor”, “savory flavor”, “sweetness”, “black soybean taste”, and “moistness”. The acceptance test results, showed that the RBF-20 experimental group was similar to the control group with respect to “odor acceptance”, “taste acceptance”, and “texture acceptance”. Thus, this study confirmed the possibility of using RBF for the preparation of madeleines.