이 논문은 한국 쇠고기 시장을 대상으로 도매 단계와 소매 단계에 초점을 맞추어 유통업자들의 시장지 배력 정도를 측정하였다. 다양한 유통 채널상에 존재하는 가격들을 보면 유통비용 외에 추가적인 가격 차 이가 있음을 보게 되는 데 이러한 비용을 넘는 가격 차이가 시장지배력을 보여주는 것으로 볼 수 있다. 연별 가격과 물량 자료를 이용하여 도매 단계와 소매 단계에서 유통상인들의 시장지배력을 측정하였다. 추정 결과를 보면, 소매단계는 완전경쟁에서 멀리 떨어져 있음을 알 수 있고, 도매단계는 상대적으로 완 전경쟁에 가까운 것으로 나타났다.

The present study was performed to determine beneficial effects of donkey meat extract supplementation (15 and 30 mg/kg B.W.) on streptozotocin (STZ) induced diabetic rat. Rump muscle of donkey was extracted by boiling in water for 3 hrs and supplemented to STZ induced diabetic rats for 6 weeks. Feed and water intake of STZ induced diabetic rats were higher than those of normal rats, while no significant difference was found in DME treated rats as compared to the rats in control group. STZ-induced diabetic rats did not improved their body weight as compared to that of rats in the control group. However, blood glucose level of 30 mg DME supplemented rats was found to be significantly reduced after 4 weeks of supplementation (p<0.05) when compared to the control animals. Administration of DME did not show any improving effect on serum lipids (HDL-cholesterol, total cholesterol, and triglyceride). No significant changes were noticed in terms of weight of all the visceral organs of animals fed on DME except liver. It is therefore, concluded that supplementation of DME with dose of 30 mg/B.W. resulted in decreased blood glucose levels, however, blood lipid profile of diabetic rats, having more than 400 mg/dl glucose level, did not change.

This study was carried out to elucidate changes in milk production, milk components and milk product properties as influenced by organic and conventional farming system. Milk production in transient organic feeding was lower by 7.6% than that in conventional feeding and also milk fat, milk protein content, solids not fat and somatic cell count were lower than conventional farming system. But, milk lactose content in transient organic feeding was higher than that in conventional feeding. Ca and Fe content in milk in organic feeding tended to be higher compared to conventional feeding. Linoleic acid and unsaturated fatty acids in milk in organic feeding was higher than those in conventional feeding and properties of milk products were improved in organic milk compared to conventional milk.

We investigated the effect of glutathione supplementation on feed intake, body weight gain, velvet antler yields and economics of elk yearling. Fourteen elk yearlings were divided into 2 groups. Seven yearlings in each group (control and treatment) were fed with 1.5-2.5 percent body weight (%BW) of concentrate feed for elk, voluntary intake of hay as roughage and 6 mg/kg body weight (KBW) of glutathione. The results were as follows. Average daily gain (ADG) for control elk yearlings for first 1.5 month was 0.46 kg, while that of glutathione supplemented was 0.55 kg. Although glutathione fed group had higher ADG compared to control group (p<0.05), ADG after 1.5 month showed no difference. In spring, daily DM intake per elk yearlings was 3.98 and 4.24 kg for control and glutathione supplemented groups, respectively. The statistical differences in feed intake between two groups were not observed. However, feed intake tends to increase in glutathione fed group. Production of velvet antlers for elk yearlings were 911±256 and 1066±357 g for control and glutathione supplemented groups, respectively. Statistical difference between two groups was not observed due to the high variation. In economic analysis, additional 109,110 KRW per head for the cost of glutathione resulted in 2 percent higher revenue index due to the increased antler production. In conclusion, feeding glutathione to elk deers effectively increased DM intake and ADG of elk yearlings. Glutathione supplementation in feed might increase velvet antler production as well as ADG.

본 연구에서는 MR 감쇠기와 FPS를 사용하여 구성된 스마트 스카이브릿지를 제안하였으며 스마트 스카이브릿지로 연결된 인접건물의 지진응답 제어성능을 분석하였다. 이를 위하여 스마트 스카이브릿지로 연결된 10층과 20층 구조물을 예제 구조물로 선택하였고 근거리 (near fault) 및 원거리 (far fault) 지진의 특성을 가지는 El Centro 지진과 Kobe지진을 사용하여 시간이력해석을 수행하였다. 스마트 스카이브릿지블 효과적으로 제어하기 위해서 퍼지논리제어기를 개발하였으며 퍼지논리제어기를 최적화하기 위하여 다목적 유전자알고리즘을 사용하였다. 최적화결과 10층 건물의 지진응답과 20층 건물의 지진응답 사이에는 상충관계 (trade-off)가 있는 것을 알 수 있었고 다목적 유전자알고리즘을 통해서 두 건물의 지진응답 제어에 대한 퍼지논리제어거의 파레토 해집합을 구할 수 있었다. 수치해석결과 본 연구에서 제안한 스마트 스카이브릿지를 사용하면 연결된 건물의 지진응답을 효율적으로 저감시킬 수 있는 것을 알 수 있었다.

We have studied methods to save Si source during the fabrication process of crystalline Si solar cells. One way is to use a thin silicon wafer substrate. As the thickness of the wafers is reduced, mechanical fractures of the substrate increase with the mechanical handling of the thin wafers. It is expected that the mechanical fractures lead to a dropping of yield in the solar cell process. In this study, the mechanical properties of 220-micrometer-solar grade Cz p-type monocrystalline Si wafers were investigated by varying saw-damage etching conditions in order to improve the flexural strength of ultra-thin monocrystalline Si solar cells. Potassium hydroxide (KOH) solution and tetramethyl ammonium hydroxide (TMAH) solution were used as etching solutions. Etching processes were operated with a varying of the ratio of KOH and TMAH solutions in different temperature conditions. After saw-damage etching, wafers were cleaned with a modified RCA cleaning method for ten minutes. Each sample was divided into 42 pieces using an automatic dicing saw machine. The surface morphologies were investigated by scanning electron microscopy and 3D optical microscopy. The thickness distribution was measured by micrometer. The strength distribution was measured with a 4-point-bending tester. As a result, TMAH solution at 90˚C showed the best performance for flexural strength.

A diamond-like carbon (DLC) film deposited on a WC disk was investigated to improve disk wear resistance for injection molding of zirconia optical ferrule. The deposition of DLC films was performed using the filtered vacuum arc ion plating (FV-AIP) system with a graphite target. The coating processing was controlled with different deposition times and the other conditions for coating, such as input power, working pressure, substrate temperature, gas flow, and bias voltage, were fixed. The coating layers of DLC were characterized using FE-SEM, AFM, and Raman spectrometry; the mechanical properties were investigated with a scratch tester and a nano-indenter. The friction coefficient of the DLC coated on the WC was obtained using a pin-on-disk, according to the ASTM G163-99. The thickness of DLC films coated for 20 min. and 60 min. was about 750 nm and 300 nm, respectively. The surface roughness of DLC films coated for 60 min. was 5.9 nm. The Raman spectrum revealed that the G peak of DLC film was composed of sp3 amorphous carbon bonds. The critical load (Lc) of DLC film obtained with the scratch tester was 14.6 N. The hardness and elastic modulus of DLC measured with the nano-indenter were 36.9 GPa and 585.5 GPa, respectively. The friction coefficient of DLC coated on WC decreased from 0.2 to 0.01. The wear property of DLC coated on WC was enhanced by a factor of 20.

To estimate the mesh selectivity of monofilament and multifilament gill net for Marbled sole, Pleuronectes yokohamae, the field testes were carried out 12 times with five different mesh sizes (86.6, 101.0, 121.2, 137.7, 151.5mm) in the western sea of Korea, 2007-2009. The master curve of selectivity was estimated by the extended Kitahara's method. In the field testes, the total number of species and catch were 26 and 987, respectively. The catch number of marbled sole was 728 and occupied 73.8% in total catch. The optimum values of l/m for 1.0 of retention probability in monofilament and multifilament gill net were estimated 0.288 and 0.307, respectively and l/m was estimated to be 0.189, 0.203, 0.213, 0.222 and 0.230 in case of monofilament gill net and 0.171, 0.191, 0.205, 0.216 and 0.227 in case of multifilament gill net when the retention probability were 0.1, 0.2, 0.3, 0.4 and 0.5, respectively. The 0.5 selection range of multifilament gill net was wider about 1.5 times than that of monofilament gill net according as multifilament gill net was 0.216 and monofilament gill net was 0.148. So the multifilament gill net has a low selectivity than that of the monofilament gill net. To estimate the optimum mesh size on first maturity length 19.5cm of marbled sole, the retention probability value of 0.1 was adopted in consideration of using the gill net for marbled sole at present. The optimum mesh size were estimated to be 103.2mm and 114.0mm in monofilament gill net and multifilament gill net, respectively, on first maturity length 19.5cm of marbled sole.

최근 선박의 좌초 및 추돌사고로 인한 해상오염이 심각해짐에 따라 선박의 조종성능에 대한 관심이 고조 되고 있는 가운데 IMO에 서는 Resolution MSC.137을 채택함으로서 조종성능에 대한 국제적인 기준이 강화 되었다. 선박의 조종성능을 향상시키기 위해서는 여러 가 지 방법이 있으나 본 연구에서는 타의 양력 증가가 조종성능 향상에 얼마나 기여하는지를 알아보고자 한다. 조종성능 평가 방법으로 수치 시 뮬레이션을 이용하였고, 대상선형은 공시선형인 Mariner Class Vessel로 하였다. 조종성능 평가 방법은 선회 시험과 Zig-Zag 시험을 수행 하였고, 고 양력 타의 적용은 수학모델에서 타와 관련된 동유체력 미계수의 값을 양력 증가에 따라 변화 시켜 조종성능의 변화를 예측하였다.

본 연구는 덕유산국립공원 남 북사면 산림 식생을 TWINSPAN으로 분류하고 DCCA ordination으로 분석한 결과, 남사면에서는 신갈나무군락, 졸참나무군락, 굴참나무군락, 소나무군락, 서어나무군락, 층층나무군락 및 들메나무군락으로 구분되었으며, 북사면에서는 신갈나무군락, 졸참나무군락, 소나무군락, 서어나무군락, 물박달나무군락, 층층나무군락, 들메나무군락, 거제수나무군락, 구상나무군락 및 주목군락으로 구분되었다. 사면별 중요치를 남사면에서는 103개 조사구를 대상으로, 북사면에서는 137개 조사구를 대상으로 분석한 결과 신갈나무가 남 북사면 모두에서 높은 중요치를 보였고 남사면에서는 신갈나무 다음으로 소나무, 졸참나무, 굴참나무, 쪽동백나무, 당단풍 순으로 나타났다. 북사면에서는 신갈나무 다음으로 들메나무가 높은 값을 나타냈고, 당단풍, 졸참나무, 서어나무, 층층나무, 까치박달, 철쭉꽃 순으로 나타났다. 남 북사면에서 군락 간에는 종조성 및 생태적 특징에 다소 차이가 있는 것으로 조사되었다. DCCA ordination 분석한 결과 해발고도와 수분요소가 남 북사면에서 모두 군락의 분포와 상관이 높은 것으로 나타났고 그 외에 남사면에 서는 T-N, O.M., Ca 양료와 pH가 비교적 높은 상관관계를 보였으며, 북사면에서는 Ca 양료와 pH도 비교적 높은 상관관계를 보였다.

There have been many efforts to modify and improve the properties of functional thin films by hybridization with nano-sized materials. For the fabrication of electronic circuits, micro-patterning is a commonly used process. For photochemical metal-organic deposition, photoresist and dry etching are not necessary for microscale patterning. We obtained direct-patternable SnO2 thin films using a photosensitive solution containing Ag nanoparticles and/or multi-wall carbon nanotubes (MWNTs). The optical transmittance of direct-patternable SnO2 thin films decreased with introduction of nanomaterials due to optical absorption and optical scattering by Ag nanoparticles and MWNTs, respectively. The crystallinity of the SnO2 thin films was not much affected by an incorporation of Ag nanoparticles and MWNTs. In the case of mixed incorporation with Ag nanoparticles and MWNTs, the sheet resistance of SnO2 thin films decreased relative to incorporation of either single component. Valence band spectral analyses of the nano-hybridized SnO2 thin films showed a relation between band structural change and electrical resistance. Direct-patterning of SnO2 hybrid films with a line-width of 30 μm was successfully performed without photoresist or dry etching. These results suggest that a micro-patterned system can be simply fabricated, and the electrical properties of SnO2 films can be improved by incorporating Ag nanoparticles and MWNTs.

Epithelioid hemangioma is an unusual, which was at first described as angiolymphoid hyperplasia with eosinophilia (ALHE) in 1969 and misinterpreted as the same disease with Kimura’s disease. But now it represents a distinctive vascular tumor, a different entity with those inflammatory conditions. Here, we present a case of epithelioid hemangioma appearing as a diffuse gingival nodular mass in 33‐year‐old male who had suffered from the idiopathic sharp pain of left mandible area previously and later extended to left maxillary region, therefore the gingival lesion was clinically estimated as malignancy associated with neural invasion. CT images revealed the soft tissue mass restricted to left maxillary gingiva without infiltration to underlying maxillary alveolar bone. Histologically, the circumscribed soft tissue mass consist of solid sheets of epithelioid to spindled cells, expressing reactivity for neither cytokeratin AE1/3 nor HMB‐45, but for CD31, endothelial cell marker. Therefore, the lesion was pathologically diagnosed as epithelioid hemangioma. Diagnostic evaluation for the neurologic symptoms of the patient revealed the trigeminal neuralgia, accompanying with the present epithelioid hemangioma incidentally. Awareness of epithelioid hemangioma should be emphasized not to be misdiagnosed as malignant disease like an invasive squamous cell carcinoma, malignant melanoma, or angiosarcoma. Proper evaluation and interpretation for neural symptom may lead to the correct differential diagnosis and therapeutic intervention

Facial numbness restricted to the distribution of the mental nerve(mental neuropathy) is called "numb chin syndrome". The clinical importance of this syndrome is associated with first recognition of involvement of malignant diseases. The malignant neoplasm with numb chin syndrome show rapid progression and high mortality. We present a 43-year-old female who had been treated by radiotherapy for precursor T-cell leukemia/lymphoma involving the central nervous system( CNS) previously and later developed mental nerve invasion without central nervous system recurrence. MRI images revealed the CNS tumor mass remitted, and there was no identified peripheral nervous system(PNS) involvement including the mental nerve invasion, nevertheless the patient complained of consistent numbness and pain on right mandibular area. This is the first case of precursor T-cell leukemia/lymphoma accompanying mental nerve invasion without recurrence for central nervous system. Proper interpretation for mental neuropathy may lead to the prompt diagnosis and therapeutic intervention.

철근콘크리트 건축물에서 비내력벽(Masonry Infill Walls)은 내부 칸막이벽이나 중저층 규모의 건물 외벽에 흔히 사용된다. 그렇지만 대부분의 경우에 비내력벽은 비구조체이므로 구조설계시 건물의 모형화에서 무시된다. 따라서 본 연구에서는 비내력벽을 보편화된 모형화 방법인 등가의 대각 압축 스트럿(Equivalent Diagonal Strut)으로 고려하여 비내력벽의 유무에 따른 저층 철근콘크리트 건축물의 전체적인 지진거동의 양상을 평가하고자 하였다. 해석결과로 비내력벽을 고려하면 시스템의 추가적인 강도 및 강성을 확보하여 층간변위비를 줄일 수 있으나 진동주기가 짧아져서 설계단계에서 고려한 지진하중보다 큰 하중을 받게 된다. 연약층이 있는 모델의 경우에는 기둥에 소성거동이 집중됨을 알 수 있으며 부분적인 붕괴가 전체 시스템의 붕괴 원인의 가능성을 가진다.

The purpose of this study examines women in 20s∼30s who start applying adult makeup and are sensitive to cosmetics and makeup techniques to understand the influence of overseas cosmetic brands’ personality on their preference to provide overseas cosmetic brands with unique personality marketing resources. The following summarize the findings of this study: first, overseas cosmetic brands’ personality factors were aesthetics, performance, interest, competency, and boldness. Second, among imported brands, the most preferred brand was Christian Dior, followed by Bobbi Brown, Chanel, SK-Ⅱ, and Estee Lauder. Third, the subjects preferred Chanel when they perceived its aesthetics, performance, and competency and Christian Dior when they perceived its aesthetics and performance and did not perceive its boldness as much. They preferred Estee Lauder when they perceived its aesthetics and competency and Bobbi Brown when they perceived its aesthetics, performance, and competency and did not perceive its boldness as much. In case of SK-Ⅱ, they preferred it when they perceived its aesthetics, performance, interest, and competency.

The purpose of this study was to investigate the appropriate water content in high omega-3 fatty acid Saury nuggets for the desirable texture. The approach was made with adding water and onion at various levels (0~20%). The main ingredients of the nuggets included saury mince, mild pizza cheese, and hydrated textured soy protein concentrate. The formulated products were molded (dia. 4.5, thickness 1.5 cm, 20 g), lightly battered, and flash fried for 4 min. at 160℃, and then frozen until tested. The frozen nuggets were cooked at 165℃ and subjected to sensory evaluations, texture analysis, and water content analysis during warming (0~60 min), as well as assessments of acid, peroxide, and TBA values (during 10 days of storage at 24℃). In the sensory evaluation, preference for texture was highest in the nuggets made with a 15% onion level. The hardness of the nuggets increased with increasing onion level. Moisture content was highest in the nuggets made with a 20% water level. Changes in hardness during warming (0~60 min) of Saury nuggets containing various water and onion levels increased in nuggets made with the 20% water level. The acid, peroxide, and TBA values of the Saury nuggets made with herbs and oriental herbal extracts decreased up to 10 days of storage.

The purpose of this paper is to investigate into the meaning of the New Brutalism sensed in the late church buildings of the Swedish architect Sigurd Lewerentz (1885-1975). St Mark's (1956-64) and St Peter's (1962-66) churches, his grand finale designs, have a unique architectural vocabulary of rough brickwork. The brick treatment is the basis on which Reyner Banham (1966) discussed him concerning the New Brutalism, and the point that this research focuses on. This paper explores the brutalist character of the buildings from two aspects - interpretational level of individual buildings and historical level of a broader view. First, the character of two churches could be interpreted with the phrase of 'play between brutality and sacredness'. The rough surface of brick and mortar in the buildings symbolises brutality and the vault of their chapels' ceiling sacredness. And the two characteristics meet and play on the rough vault surface. Second, in the historical point of view, this paper argues that the buildings made a giant leap for Swedish modern architecture, which had been at a deadlock owing to the compromising attitude of the New Empiricism since 1940s. And the Swedish New Empiricism (or the New Humanism), spread to Britain as "Welfare State architecture" after World War II, brought about reaction of the young British architects such as the Smithsons and became the background that made the new brutalist mood. However, considering that the term of the New Brutalism was first used in Sweden by Hans Asplund, Lewerentz's brutalist late churches - which seemingly had nothing to do with the British nor the Corbusian lineage - are also meaningful in that they confirmed the tendency in its homeland. In conclusion, this paper argues that St Mark's and St Peter's churches with the brutalist characteristics should be regarded as crucial buildings not only in Lewerentz's personal career but also in Swedish and international architectural history.