우수농산물관리제도(GAP)는 농산물의 안전성을 확보하기 위하여 농산물의 생산단계부터 수확 후 포장단계까지 위해요소를 관리하는 기준이며, 또한 GAP제도는 농산물을 안전하게 생산하는 제도일 뿐 아니라 환경에 미치는 위해요소를 관리하는 제도로도 그 기능을 수행할 것으로 기대되고 있다. 그리고 소비자에게 안전하고 위생적인 농산물을 공급할 수 있는 위해관리 시스템이다. 본고에서는 시설원예농산물 가운데서 특히 생식용으로 소비가 증가하고 있는 파프리카 및 딸기를 대상으로 재배농가의 GAP의 이행실태를 현장조사를 통하여 분석하고, 향후 시설원예 농가의 GAP 이행 수준을 제고시키기 위한 방향을 제시하고자 한다.

2008년에 개최되었던 APEC EDNET 에서는 제 4차 교육장관회의에서 다룰 의제로 ' 21 세기 핵심역량과 기술 성취’로 정하고， 회원국들의 공통적인 의견을 모아 앞으로 관심을 가지고 진행하여야 할 교육 의제에 대하여 심도 있는 논의를 진행하였다. 수학과 과학 영역은 APEC 회원국들이 관심을 가지고 국가적 차원에서 투자하고 교육 정책을 지속적으로 강화해야 한다는 측면에서 가장 중요하게 논의되고 있는 영역 중 하나로，APEC 회원국들 간에도 수학과 과학 영역의 중요성에 대해서는 일치된 견해를 가지고있다. 이에， 본 연구에서는 첫째， APEC 교육 협력과 관련하여 우리나라 수학·과학 영역에서 중점 추진하고 있는 분야를 제시하고，둘째，APEC 에서 논의 된 사항을 중심으로향후 수학·과학 영역에서 추진하여야 할 주요 과제에 대하여 구체적으로 논의하였으며，셋째，APEC 교육 협력을 위한 최근의 수학·과학 교육 정책 방향을 제시하였다. 마지막으로，우리나라의 교육 현황을 비추어 앞으로 우리나라에서 취할 수 있는 전략과 대책을제시하고，특별히 APEC 수학·과학 교육 정책의 향후 방향에 대한 논의와 시사점을 제안하였다.

The cultural characteristics and antibacterial activities of Cordyceps militaris and Paecilomyces tenuipes were compared. The mycelial growth was the highest on MCM (Mushroom Complete Medium) for C. militaris and on YMA (Yeast Malt Agar) for P. tenuipes. But the mycelial density on MMM (Mushroom Minimal Medium) was lower than other on media. The optimum mycelial growth was observed at 25℃. C. militaris was low mycelial growth when it was transferred over 5 times generation. The carbon source for the optimum mycelial growth was fructose of monosaccharide, maltose of disaccharide and dextrin of polysaccharide. The calcium nitrate of organonitrogen was found the best mycelial growth on C. militaris, while the sodium nitrate observed to be well for mycelial growth on P. tenuipes. The ammonium tartrate was observed to be the best among the inorganonitrogen used for mycelial growth. Antibacterial activities were found out just C. militaris against Bacillus cereus of Gram (+).

Eight Bacillus thuringiensis strains activated against mosquito larva were compared their characterization. Spherical-shaped parasporal inclusion of B. thuringiensis subsp. tohokuensis CAB167 was observed by phase-contrast microscopy and scanning electron microscopy. LC₅₀ values of B. thuringiensis subsp. tohokuensis CAB167 against Culex pipiens molestus, Culex pipiens pallens, and Aedes aegyti were 173, 190 and 580 ng/㎖, respectively. B. thuringiensis subsp. tohokuensis CAB167 had a parasporal inclusion containing 4 major protein components, for example, 135, 80, 49 and 28-kDa by SDS-PAGE. Otherwise, after trypsin digestion of parasporal inclusion, SDS-PAGE was showed new protease-resistant peptides at 72 and 63-kDa. Activated toxins of isolated CAB167 were different from other reference strains on a serological by immuno-diffusion test.

본 연구는 ARCS의 학습동기모델 전략(주의집중, 관련성, 자신감, 만족감)을 중학교 환경교과서의 [환경보존]단원에 적용하기 위하여 다른 수업 방식과 비교한 것이다. 이를 위하여 부산광역시에 소재하는 중학교 2학년 135명에게 적용하기 위하여 학생들을 수업전략에 따라서 그룹으로 나누었다. 첫 번째 그룹은 전통주의 방식에 의한 수업을 받는 학생들로 구성되어 있었으며, 두 번째는 구성주의 수업방식을 받는 학생, 세 번째는 ARCS전략을 사용한 구성주의 수업

Recently, technology growth and globalization of the market bring the age of knowledge based economy. These competitive environment require that the firms should cooperate among industry, academia, and institute. Cooperation between firms and universities for research and development is one of the most important business strategy in improving their business competences. This paper studied the factors of the firm involvement in the cooperation between firms and universities for technology development. To analyze the involvement factors, the data of 'R&D activity survey' of Ministry of Science and Technology(MOST) were used. Based on results of the analysis, 6 factors such as firm size, the years of firms, ratio of the researchers, the ratio of collaborative investments, the ratio of new product development, and the number of property right were significant. As the technology cooperation get flourished, the results of this research is expected to play a meaningful role as an basic data for developing the cooperation between industry and academia policy for technology development.

In this study, the most effective salting-out effect has been examined in terms of application of various inorganic salts (NaCl, Na₂S0₄, NaHSO₃) using Alkali impregnated filter-Headspace-GC/FID. Five various VFAs (propionic acid (99.5%), r-butyric acid (99%), butyric acid (99%), i-valerie acid (99%), valerie acid (99%)) have been used. VFAs have been analyzed by adding 30%, 70%, 100%, 150%, 200% of different inorganic salts with HS-GC/FID. The efficiency of salting-out effect was obtained from the values of peak area in chromatogram. The most effective salting-out effect for applired inorganic salts was observed at 100% saturation. It was confirmed NaHSO₃ for salting-out effect was the best among inorganic salts. In addition, NaHSO₃ showed more efficiency of salting-out effect than NaCl as molecular weight of VFAs increases.

In this study, simple preprocessing method for the analysis of headspace phase has been examined. The odor causing components were verified from the analysis of amine species emitted from squid waste. The concentrations of odor causing chemical components were confirmed in terms of four different sample treatments (treatment at 60℃, sonification, pressure treatment, addition of microorganism). HS-autosampler/GC/FID has been used for the analysis of chemical components and standard material addition method was utilized for quantification. The analysis results indicated that the major odor causing amine compounds emitted from squid waste were DMA and TMA. In addition, it was confirmed TMA showing higher malodor concentration predicted was relative malodor causing chemical component. Sonification and pressure treatment reduced the production of DMA and TMA by lowering the activity of microorganisms, while the addition of microbial accelerated the metabolism of microorganisms leading to the increased production of DMA and TMA.

It is very important to evaluate the priority of prevention factors and strategies in order to minimize industrial accident. It provides decisive information for accident prevention and safety management. Therefore, this paper proposes evaluation method of the priority through statistic testing with prevention factors and strategies by the cause analysis of cause and effect models. Especially, this paper uses priority matrix criterion to justify application of rank and objectivity. This paper is based on the results of a questionnaire of workers and managers who are engaged by real manufacturing and construction industries with less than 300 workers in the central region of Korea, where most of the fatal accidents have happened. Finally, the result provides one way to implement safety management for industrial accident prevention.

본 논문은 유색아스팔트 혼합물에 사용된 안료가 유색아스팔트 혼합물 성능에 미치는 영향에 대한 시험 및 분석결과이다. 안료 입자 크기는 필러의 입자에 비하여 매우 미세하기 때문에 배합설계시 필러 량의 조절이 필요하다. 현행의 배합설계를 조사한 결과 필러의 투입량에 관계없이 배합설계시 골재중량의 약 2%를 투입하고 있는 것으로 조사되었다. 안료의 투입은 필러의 양을 증가시키는 것으로 아스팔트 혼합물의 공극관련 인자(공극률 및 VMA)에 영향을 주어 매우 불안정한 혼합물을 구성하게 된다. 이러한 영향은 포장의 공용성과 파손에 밀접한 관련이 있으며 역학 성능(간접인장강도, 회복탄성계수, 수분 민감도 및 크리프) 저하를 초래하는 것으로 시험결과 발견되었다.

Since korea must get 5.2% reduction of green gas emission and insecurity of economic impact is on the increase due to unstable oil market, the demands of energy saving techniques are increasing. In this paper, we investigate necessity of development of enormous energy used cleanroom energy saving techniques furthermore we also investigate the adoption of dependability management system to develop the energy saving cleanroom development process.

Recently, product-reliability and process-reliability in product development processes has been regarded as an important issue in many manufacturers. TRIZ which is theory for inventive solving is required to obtain reliability of each process. To solve the technological problems, TRIZ provides problems can be occurred in product development processes as a contradiction matrix based on 40 creative invention principles with alternatives for physical and technological contradiction. This paper suggests the method for inventive solving to ensure the reliability assurance of product development processes based on TRIZ.