Fusarim oxysporum에 의한 덩굴쪼김병은 수박 재배에 큰 피해를 일으키는 중요한 병이다. 이 병을 방제하기 위해 덩굴 쪼김병 저항성 박 대목을 이용하는 것이 가장 좋은 방법이다. 본 연구는 박 덩굴쪼김병 저항성 자원을 선발할 수 있는 방법을 확립하기 위해 수행하였다. 효과적인 접종법을 개발하기 위해 접종 후 온도(15, 20, 25, 30°C), 접종 농도(1 X 105, 5 X 105, 1 X 106 and 5 X 106 conidia･mL-1), 접종 시기(파종 7, 10, 13, 16일 후)를 조사하였다. 박 덩굴쪼김병을 접종하였을 때 접종 후 배양 온도나 파종 후 접종 시기의 영향이 적었다. 그러나, 덩굴쪼김병에 저항성인 박의 경우 접종농도가 높을수록 발병이 심하게 나타났다. 따라서, 박 덩굴쪼김병에 대한 효과적인 접종법으로 파종 10일 된 유묘 뿌리를 1 X 105 - 1 X 106 conidia･mL-1 농도로 30분간 접종한 후 감염되지 않은 토양에 옮겨 심고 25°C에서 3주 동안 재배하는 것을 제안한다.

Carbon supports for dispersed platinum (Pt) electrocatalysts in direct methanol fuel cells (DMFCs) are being continuously developed to improve electrochemical performance and catalyst stability. However, carbon supports still require solutions to reduce costs and improve catalyst efficiency. In this study, we prepare well-dispersed Pt electrocatalysts by introducing titanium dioxide (TiO2) into biomass based nitrogen-doped carbon supports. In order to obtain optimized electrochemical performance, different amounts of TiO2 component are controlled by three types (Pt/TNC-2 wt%, Pt/TNC-4 wt%, and Pt/TNC-6 wt%). Especially, the anodic current density of Pt/TNC-4 wt% is 707.0 mA g−1 pt, which is about 1.65 times higher than that of commercial Pt/C (429.1 mA g−1 pt); Pt/TNC-4wt% also exhibits excellent catalytic stability, with a retention rate of 91 %. This novel support provides electrochemical performance improvement including several advantages of improved anodic current density and catalyst stability due to the well-dispersed Pt nanoparticles on the support by the introduction of TiO2 component and nitrogen doping in carbon. Therefore, Pt/TNC-4 wt% may be electrocatalyst a promising catalyst as an anode for high-performance DMFCs.

In this study, the uniformity of the horizontal velocity and the temperature of each zone were investigated by computerized analysis method to divide the drying room into three multi - rooms to ensure the uniformity of flow inside the forced convection hot air dryer. The internal structure of the drying room of the dryer was modeled using Solidworks. In order to control the flow of hot air circulating in the drying chamber, the possibility of controlling the horizontal flow inside the drying room was verified by using a perforated plate, a guide vane, and a vertical plate. From the results of the flow visualization in the drying room, it was understood that the internal flows of the dryer models 1, 2 and 3 change from ununiform flow to uniform flow. From the analysis of velocity and temperature fluctuation, the results of the analysis of the dryer model 3 satisfied the design conditions.

In this study, a white smoke reduction simple prediction model of white smoke reduction heat exchange system was developed by using EES. In order to verify the reliability of the EES model, it was compared with the computational results. The developed EES predictive model was used to calculate the temperature and absolute humidity of the mixed SA and EA according to the change of cooling water capacity, flow rate ratio of SA/EA, and SA inlet temperature. The difference between final temperature and absolute humidity at the outlet of the mixer calculated by computational analysis and EES was within 1.4% and 3.6%. As the cooling water capacity and the inlet flow rate ratio increased, and as the inlet air temperature decreased, the temperature and absolute humidity of the mixer decreased. The most influential factor in the white smoke reduction effect among the design variables of the white smoke reduction heat exchange system was the flow rate ratio of SA/EA.

보이지 않는 힘으로도 불리는 잠수함은 수중에서 활동하는 은밀성을 장점으로 대함전, 대잠전 및 핵심표적 타격 등의 임무를 수행하는 전략 수중 무기 체계로 심해에서 높은 수압을 견디며 작전을 수행할 수 있어야 한다. 이러한 관점에서 잠수함 압력 선체는 잠항 깊이에 상응하는 외부 수압에 저항하는 가장 중요한 체계로서 누수, 화재, 충격 및 폭발과 같은 위험으로부터 안전성을 확보함으로써 생 존성을 높임과 동시에, 작전 수행 능력을 유지할 수 있게 해주는 강도를 확보하고 있어야 한다. 이를 위해서는 잠수함 압력 선체의 구조 형상 설계가 초기에 수행되는 것이 합리적이다. 특히, 함미 원추부 구조물과 압력선체 평형부 및 함미 비압력선체를 연결하는 함미 트랜 지션 링의 경우, 설계된 잠수함에 따라 다양한 형상을 띄고 있다. 본 구조물 설계를 위해서는 응력 흐름과 연결성을 고려한 설계뿐만 아 니라 복잡한 형상이 기인한 구조물 제작 투입 시수 증가로 인한 원가 상승 또한 검토해야 한다. 따라서, 본 연구에서는 4가지 서로 다른 형상을 갖는 함미 트랜지션 링에 대해서 비선형 유한요소해석을 통한 구조 강도 검토와 더불어 함미 트랜지션 링 형상 복잡도에 따른 작 업 일수 및 자재비 검토를 통해 경제성 측면에서의 적정성 검토를 수행하였으며, 검토된 4가지 형상 중 가장 합리적인 잠수함 함미 트랜 지션 링 형상을 제안하였다.

The prediction of Jominy hardness curves and the effect of alloying elements on the hardenability of boron steels (19 different steels) are investigated using multiple regression analysis. To evaluate the hardenability of boron steels, Jominy end quenching tests are performed. Regardless of the alloy type, lath martensite structure is observed at the quenching end, and ferrite and pearlite structures are detected in the core. Some bainite microstructure also appears in areas where hardness is sharply reduced. Through multiple regression analysis method, the average multiplying factor (regression coefficient) for each alloying element is derived. As a result, B is found to be 6308.6, C is 71.5, Si is 59.4, Mn is 25.5, Ti is 13.8, and Cr is 24.5. The valid concentration ranges of the main alloying elements are 19 ppm < B < 28 ppm, 0.17 < C < 0.27 wt%, 0.19 < Si < 0.30 wt%, 0.75 < Mn < 1.15 wt%, 0.15 < Cr < 0.82 wt%, and 3 < N < 7 ppm. It is possible to predict changes of hardenability and hardness curves based on the above method. In the validation results of the multiple regression analysis, it is confirmed that the measured hardness values are within the error range of the predicted curves, regardless of alloy type.

The performance of Li-ion hybrid supercapacitors (asymmetric-type) depends on many factors such as the capacity ratio, material properties, cell designs and operating conditions. Among these, in consideration of balanced electrochemical reactions, the capacity ratio of the negative (anode) to positive (cathode) electrode is one of the most important factors to design the Li-ion hybrid supercapacitors for high energy storing performance. We assemble Li-ion hybrid supercapacitors using activated carbon (AC) as anode material, lithium manganese oxide as cathode material, and organic electrolyte (1 mol L−1 LiPF6 in acetonitrile). At this point, the thickness of the anode electrode is controlled at 160, 200, and 240 μm. Also, thickness of cathode electrode is fixed at 60 μm. Then, the effect of negative and positive electrode ratio on the electrochemical performance of AC/LiMn2O4 Li-ion hybrid supercapacitors is investigated, especially in the terms of capacity and cyclability at high current density. In this study, we demonstrate the relationship of capacity ratio between anode and cathode electrode, and the excellent electrochemical performance of AC/LiMn2O4 Li-ion hybrid supercapacitors. The remarkable capability of these materials proves that manipulation of the capacity ratio is a promising technology for high-performance Li-ion hybrid supercapacitors.

This study investigated the effect of temperature deviation on the water-holding capacity, tenderness, lipid oxidation, and color stability of Korean Hanwoo (韓牛) beef during long-term aging. The striploins (M. longissimus lumborum) were aged for 56 days at 2±1oC (T1), 2±2oC (T2), or 2±3oC (T3). Drip loss and cooking loss were higher (p<0.05) in T3 than in T1 on day 56. The Warner-Bratzler shear force value was similar for all treatments during aging times. On day 56, the content of 2-thiobarbituric acid reactive substances was higher (p<0.05) in T3 as compared to T1. The CIE L* and b* values were similar for all treatments, but the a* value was lower (p<0.05) in T3 than in T1 on the last day. These findings indicate that high temperature deviation adversely affects the water-holding capacity, lipid oxidation stability, and color stability of Hanwoo beef during long-term aging.

본 연구에서 국내 어류 분류군별 체형비 (Fineness Ratios; FR)를 분석한 결과 일부 잉어과와 납자루아과, 꺽지과, 검정우럭과 등의 어류 체형비가 상대적으로 낮았고, 그 외 분류군별 어류의 체형비는 4.5 이상으로 대부분 유영력이 뛰어난 것으로 나타났다. 유영성 어류를 대상으로 체장-체고 비에 따른 서식지 선호를 분석한 결과 크게 3가지 어종타입은 구분되었다. 유영력이 낮은 납자루-붕어형은 체형비는 2.1∼3.3 범위이며, 유선형의 비율을 가지는 피라미-참 갈겨니형은 체형비가 3.7∼5.2 범위였다. 은어-누치형은 체장이 체고의 5배 이상으로 유영력이 뛰어난 형태를 가지고 있었다. 어류 체형비에 따른 서식지 유형을 구분하면 붕어- 납자루형은 흐름이 완만한 소 (Pool habitat)형태의 서식지를 선호하는 어종 우세하였고, 반면 피라미-참갈겨니형, 은어-누치형의 경우 유속이 빠른 여울형서식지 (Riffle habitat) 를 선호하는 어종들로 구성되었다. 조사기간 동안 어도를 이용한 어류의 상대풍부도를 분석한 결과, 대부분의 어종들이 피라미-참갈겨니, 은어-누치형에 속하는 유영성이 높은 어류들로 확인되었다. 어도 내 유속이 0.5∼1.0 m s-1 범위에서 이용 어종의 FRs는 4.5∼5.0 범위로 나타나 대부분 유영성 어종들이 어도를 주로 이용하는 것으로 나타났다.

본 연구는 가야산 포천 계곡의 생태관광 자원 활용을 목적으로 현존 환경요인과 군집유형의 관계를 식물사회학적으로 분석하여 적절한 식생 관리 방안을 제시하기 위해 수행하였다. 조사결과, 가야산 포천 계곡에서 다음과 같은 5개 유형의 군집이 조사되었다. 소나무-신갈나무군락, 졸참나무-굴참나무군락, 일본잎갈나무-졸참나무군락, 소나무-밤나무군락, 갯버들- 달뿌리풀군락으로 나타났다. 졸참나무-굴참나무군락은 다시 조사지에 따라 2가지의 하위군락으로 나타났다. 조사지 식생을 대상으로 생태관광자원 활용과 건전한 자연식생 유지를 위해 다음과 같은 식생관리방안을 제안하는 바이다. 나타난 식물군집 의 교목층에 대한 인위적인 관리는 철저히 배제하여 현존식생을 유지하도록 하며, 금후 시간 경과에 따라 관목층에서 생육하는 교목성 수종이 아교목층 이상으로 성장하였을 때, 숲 관리 등의 인위적 관리를 실시하여 기존 식생구조를 최대한 유지하도록 한다. 연구 대상지의 생물다양성을 높이기 위해 관목층 이하 층위에서 특정 종의 우점을 배제하고 다양한 식물종이 우점도를 유지할 수 있도록 인위적인 관리를 지속적으로 실시한다.

본 연구는 2018년 7월 20일부터 2018년 8월 1일까지 안산시 단원구에 위치한 화랑유원지 오토캠핑장의 집수정에서 연구를 실시하였으며, 조사지점은 기법별로 대조지점, 천적지점, Bti 지점을 선정하였다. 서식처 환경 분석 및 채 집된 저서성 대형무척추동물을 대상으로 종조성, 군집분석, 상관성 분석, 유사도 분석을 실시하여 잔물땡땡이, Bti 가 저서성 대형무척추동물에 미치는 영향을 파악하였다. 서식처 환경 분석 결과, 수질항목은 지점간 유의한 차이는 없는 것으로 분석되었으며 (p>0.05), 하상구조 및 식물군 락이 유사하여 서식처 특성에 의한 종조성의 차이는 적을 것으로 판단된다. 조사시간 동안 총 11목 22과 38종 4,818 개체가 출현하였으며, 천적지점은 대조지점과 비교적 유사한 종조성을 나타내는 것으로 분석되었다. 반면 Bti 지점은 다른 지점에 비해 단순한 종조성을 나타내었으며, 파리목의 종수 및 개체수가 가장 빈약한 것으로 분석되었다. 군집 분석 결과, 조사기간 동안 Bti 지점에서 불안정한 군집양상을 나타내었으며, 천적지점은 비교적 안정적인 군집양상을 나타내는 것으로 분석되었다. 파리목과 모기유충을 대상으로 수질과의 상관성 분석을 실시한 결과, 파리목과 기온, 수온은 음의 경향성을 나타내었으며, 모기유충과 기온은 - 0.610*, 수온은 -0.674*로 유의한 음의 상관성을 나타내는 것으로 분석되었다 출현종을 대상으로 유사도 분석을 실시한 결과, 대조지점과 천적지점은 조사시기별 61.11~ 73.68%, Bti 지점은 30.77~56.00%의 유사도를 나타내어 천적지점에 비해 대조지점과 유사도가 낮은 것으로 분석되 었다. 본 연구는 단기간의 연구 결과로 습지유형 등을 고려 하여, 다양한 환경에서 생물학적 모기유충 방제 기법이 저서성 대형무척추동물에게 미치는 영향에 대한 장기적인 연구가 필요할 것으로 판단된다.

풍혈지는 특수한 국소적인 저온 환경으로 인해 북방계 식물들이 온대지역의 해발고도가 낮은 지대에서도 분포 하는 것을 가능하게 한다. 본 연구는 한반도 주요 풍혈지 15개소에 대한 선태식물 종조성을 밝히고, 종다양성의 패턴분석 및 식물지리학적 중요성을 고찰하고자 한다. 풍혈지의 선태식물상 조사결 과, 59과 138속 226종 2아종 5변종의 총 233분류군으로 확인되었다. 이 가운데 북방계 선태식물은 검정이끼, 담뱃대이끼, 된서리이끼, 수풀이끼, 겉창발이끼 등이 풍혈지에서 생육하고 있었다. 국내 (남한)에서 발견된 미기록종은 14 분류군, 한반도에서 발견된 미기록종은 7분류군이었다. 지소별 유사도 분석결과, 환경 특성이 유사한 지소끼리 유사도 지수가 높게 나타남에 따라 각 풍혈지별 선태식물의 종조성은 지형과 미소 기후의 특성을 잘 반영하고 있는 것으로 판단된다. 풍혈지는 최후빙하기의 한반도의 기후, 식생 환경을 이해할 수 있는 직접적인 증거를 보유한 서식지 (피난처)이지만 풍혈지의 식생은 어떠한 보호조치도 없이 인위적으로 훼손되고 있다. 풍혈지의 생물학적인 가치와 보전의 필요성을 인식하고 체계적이고 합리적인 관리방안이 마련되어야 할 것이다.

Additively manufactured metallic components contain high surface roughness values, which lead to unsatisfactory high cycle fatigue resistance. In this study, high cycle fatigue properties of selective laser melted Ti-6Al- 4V alloy are investigated and the effect of dry-electropolishing, which does not cause weight loss, on the fatigue resistance is also examined. To reduce the internal defect in the as-built Ti-6Al-4V, first, hot isostatic pressing (HIP) is conducted. Then, to improve the mechanical properties, solution treatment and aging are also implemented. Selective laser melting (SLM)-built Ti64 shows a primary α and secondary α+β lamellar structure. The sizes of secondary α and β are approximately 2 μm and 100 nm, respectively. On the other hand, surface roughness Ra values of before and after dry-electropolishing are 6.21 μm and 3.15 μm, respectively. This means that dry-electropolishing is effective in decreasing the surface roughness of selective laser melted Ti-6Al-4V alloy. The comparison of high cycle fatigue properties between before and after dry-electropolished samples shows that reduced surface roughness improves the fatigue limit from 150 MPa to 170 MPa. Correlations between surface roughness and high cycle fatigue properties are also discussed based on these findings.

본 논문에서는 OpenSees 프로그램을 이용한 콘크리트 교량의 지진취약성 분석 방법에 대한 고찰을 제시한다. 교각 및 휨 부재 분산 비선형(distributed plasticity) 요소를 적용한 해석모델을 활용하여 지진에 대한 응답을 구하고 이를 통계적으로 처리하여 확률론적 지진취약성 분석을 수행한다. 응답 통계는 세기가 같은 지진파의 집단을 단계별로 scaling하는 stripe 방 법과 다양한 세기를 가진 지진파 집단을 선정하는 cloud방법을 적용하고 이 두 방법에 의한 분석결과의 차이를 비교한다. 한계 상태에는 교각의 휨변형과 교좌장치의 변위를 기준으로 산정한 다단계 한계상태를 적용하고, 여러 가지 한계상태를 취합한 시스템 취약성을 도출한다. 지진응답의 통계적 처리 방법과 교량의 손상 정의가 지진취약성 곡선에 주는 영향을 고찰한다.

Asthma is a chronic diseases that restricts the air passage ways and which is thought to be caused by several factors such as genetics, obesity, mVOC, air pollution, allergens, and fungi. Domestic information on fungi in the indoor air in the houses of asthma patients in the spring and fall is rarely available. Thus, this study was carried out to investigate fungal concentration and diversity. Air samples were collected from the houses of 6 asthma patient in April and October of 2017 located in Seoul and Gyeonggi Provinces using an impaction method. The average concentrations of suspended fungi in the indoor air at the houses of adult asthma patient in October exceeded the 500 CFU/m3 level recommended by the Enforcement Managements of the Indoor Air Quality Control Act. A total of 70 fungi were isolated and identified. Four genera and 11 species were from the April sampling and 10 genera and 27 species were from the October sampling. Among the identified fungi, five species, Arthrinium marii, Penicillium austrosinicum, Penicillium concavorugulosum, Penicillium exsudans and Penicillium johnkrugii were found to be unrecorded species in Korea. The known properties of all identified fungi and the morphological and molecular characteristics of the five unrecorded species were described.

In this study, 38 residents of the Jeonnam areas in Korea were assessed for their level of exposure to VOCs. The aim was to understand the difference in levels of indoor, outdoor, and personal exposure to VOCs (benzene, toluene, ethylbenzene) and a health effect assessment was conducted to determine whether there was any fatal cause from carcinogenic or non-carcinogenic elements from case and control group. Personal exposure to benzene showed a higher distribution than indoor and outdoor concentrations, and it was found that the average concentration of the case group was higher than that of the control group in all indoor, outdoor, and personal exposures. With regard to benzene, in the CTE, RME, and Monte-Carlo analysis, all subjects in the case group were seen to exceed the lifetime cancer risk of 10−6 defined by the US EPA and in the RME analysis the control group subjects were also seen to exceed the lifetime cancer risk of 10−6 defined by the US EPA. In the case of toluene, ethylbenzene on the CTE, RME, and Monte-Carlo analysis, the non-carcinogenic standard of 1 was not exceeded.

This study was carried out to investigate the effect of the feeding method of total mixed fermentation (TMF) and concentrate feed on the growth performance, carcass and meat characteristics of late fattening Hanwoo steers. Twenty-four Hanwoo steers were used in this study. The control group was fed with concentrate feed + rice straw from the growing to the late fattening period, while the T1 group was fed with TMF from the growing to the early fattening period and concentrate feed + rice straw for the late fattening period. The T2 group was fed with TMF from the growing to the late fattening period. The average daily gain (ADG) and feed conversion ratio (FCR) were not different between the treatment and control group. Serum cholesterol and high density lipoprotein (HDL) cholesterol concentrations were higher in the T2 groups than in the control group (p<0.05). The yield grade and quality grade were not different between the treatment and control group. The lightness of longissimus muscle was higher in the T1 group than in the control and T2 groups (p<0.05). Poly-unsaturated fatty acid (PUFA) of longissimus muscle was increased in the T2 groups than in the control group. Therefore, the method of feeding TMF and concentrate feed could have a positive effect on the lightness and fatty acid composition of longissimus muscle without affecting the growth and carcass grades of Hanwoo steers.

This study was conducted to investigate the effect of whole crop rice based TMR on the meat quality of Korean Native Cattle (Hanwoo). Sixteen Hanwoo steers (average 8 months old) were divided into the control group (commercially marketed TMR) and the WCR-TMR group (whole crop rice based TMR). Feeding trials were carried out up to 30 months of age, and after slaughter, the strip loin were collected and analyzed for meat quality. There were no significant differences in proximate compositions of Hanwoo (P>0.05), and crude protein, crude fat and crude ash were 19.51∼20.23 %, 11.53∼11.35 % and 1.10∼1.12 %, respectively. There was no significant difference in water holding capacity and cooking loss between treatments (P>0.05), but it was slightly lower in the control group. Among the various functional components in meat, β-carotene was not detected, but α-tocopherol was significantly higher in WCR-TMR group and vitamin A content in control (P<0.05). The a*-value in the meat color index decreased significantly with longer storage period in the control group, whereas the WCR-TMR fed group showed no significant difference (P>0.05) according to the storage period. There were no difference between the treatments in the TBARS (2-Thiobarbituric acid reactive substances) value used as an indicator of lipid oxidation and in fatty acid content. But the control group had high myristic acid content, whereas the WCR-TMR supplemented group showed higher oleic acid and linoleic acid content. In conclusion, feeding of WCR based-TMR increased the α-tocopherol content, which is a functional ingredient in meat, and the other components were not significantly different from the control. Therefore, it was judged that there was no significant difference between WCR based and conventional TMR in meat quality characteristics.

This study was carried out to investigate the effect of mountain grazing on growth performance and carcass characteristics of Hanwoo steers. Thirty two Hanwoo steers were randomly assigned. Control were fed concentrate + forage until 30 month of age. Treatment1 were fed concentrate + forage after mountain grazing from 8 to 13 months. Treatment2 and 3 were fed concentrate + forage after mountain grazing from 8 to 17 months. Hanwoo steers on Treatment 1 and 2 were slaughtered at the same age (30 months) as the control, and Hanwoo steers on Treatment 3 were slaughtered at 31 months. The average daily gain (ADG) were higher in the control than in the other treatments during the growing period (p<0.05). Carcass back fat thickness was thicker in the TRT 3 and marbling score was higher in the TRT 1 than in the other treatments; however, the differences were not statistically significant. There was no difference in the meat composition and shear force of the longissimus muscle according to the mountain grazing. However, the yellowness (b) of fat colors were significantly lower in the control than in the TRT 1 and TRT 2 (p<0.05). The effect of grazing on fatty acid composition was not constant. In conclusion, mountain grazing could reduce meat color without affecting the growth and meat quality of Hanwoo steers, and further research on the quality, yield and intake of grassland would be needed.