This experiment was carried out in experiment field at Hoengseong from March to July 2015 to evaluate the seed productivity and feed value of oats (Avena sativa L.) according to the difference of seeding date. The experiment was arranged randomized complete design with three replications. The treatments were consisted of three seeding dates (12, 22 March and 2 April). The emergence and heading of oat showed a tendency to accelerate as the seeding date was delayed while the number of days taken for the flowering after the heading remained unchanged. The plant height, panicle length, number of culm, and number of panicle all tended to decrease with the delay of seeding date. The seed yield showed a significant difference with 3.55 ton/ha in 12 March and 2.38 ton/ha in 2 April (p<0.05). The dry matter yield also showed significantly different in 12 March and 2 April which were 6.57 ton/ha and 4.56 ton/ha, respectively (p<0.05). The feed value measured as CP (crude pretein), NDF (neutral detergent fiber), ADF (acid detergent fiber) and DMD (dry matter digestibility) showed no difference according to the seeding date. In the case of RFV (relative feed value), a decrease with the delay of seeding date was observed but only an insignificant difference (p>0.05). As the purpose of this study was not production of roughage but that of the seed, cultivation was in the full-ripe period, hence a relatively low feed value. In conclusion, it is considered that the appropriate seeding date for a spring cultivation of oats for the purpose of seed production in Hoengseong is in early March regarding growth characteristics, seed yield, and feed value.

본 연구는 2014년 7월부터 2015년 9월까지 제주 한국마 사회 제주육성목장(해발 450m) 시험포장에서 여름 동안 생산성이 유지될 수 있는 남방형 목초를 도입하여 재배에 이용하기 위하여 Bermudagrass 품종(Cynodon dactylon (L.) Pers. : Giant, Cheyene, Mohawk, Panchero Frio, Common) 과 Bahiagrass 품종(Paspalum notatum : TifQuik, Tifton 9, Argentine), 그리고 Teff grass(Eragrostis tef : Tiffany) 품종 의 생육특성 및 건물 수량을 평가하기 위하여 실시하였다. 실험설계는 품종을 처리로 10처리 3반복 난괴법으로 배치 하였다. 1차년도 1차 수확은 8월 31일, 2차 수확은 9월 21일이며 2차년도 1차 수확은 7월 22일, 2차 수확은 8월 14 일, 3차 수확은 9월 11일로 성장단계를 고려하여 수확하였 다. 1차년도 남방형 품종의 건물 수량은 Teff grass의 Tiffany가 산파와 조파 각각에서 2.59와 2.00Ton/ha로 가 장 높은 건물수량을 나타내었으며, Bermudagrass의 Common이 산파에서 1.21Ton/ha로 다년생 남방형 목초 중 가장 높은 수량을 나타내었다. 2차년도 남방형 품종의 건물 수량은 Bahiagrass의 Tifton9이 산파에서 15.06Ton/ ha로 가장 높은 수량을 나타내었으며 Bahiagrass의 Tifquik이 산파에서 14.68Ton/ha로 두 번째로 높은 수량을 나타내었다. 조단백질 함량은 Bahiagrass의 Argentine이 19.75%로 가장 높게 나타났으며 NDF 함량은 Bermudagrass 의 common이 61.69%로 가장 높은 것으로 나타났다. 한해 에 의한 피해의 경우 대부분의 Bermudagrass 품종의 경우 에 동절기 적응성이 떨어졌으나 Bahiagrass의 Tifton 9 품 종의 경우 한해에 대한 피해를 거의 받지 않았으며 출현, 내병성, 내습성, 도복성은 품종 간 차이가 거의 없었으며 Teff grass의 Tiffany이 도복과 습해에 의한 피해가 나타났다. 이상의 결과를 종합해 볼 때 제주지역에서 Bermudagrass와 Bahiagrass의 일부 품종은 월동할 수 있어 여름철 조사료자 원으로 활용이 가능하지만, 품종 간 내한성 능력과 재생능 력이 다르므로 이를 고려하여 품종을 선택할 필요가 있다.

본 연구는 농후사료의 급여수준을 달리하여 제주산마 에게 급여하는 경우에 체중 변화, 장내 미생물 조성 및 혈액성상의 변화에 미치는 효과를 구명하기 위하여 수행 되었다. 공시축으로 24-36개월의 제주산마(제주마×더러브 렛) 14두를 공시하였으며, 농후사료의 급여수준을 체중의 1.5%(5두), 2%(4두)와 2.5%(5두)로 급여하여 봄과 겨울 증 체율 및 혈액 특성과 생리적 변화를 조사하였다. 봄에 총 증체량은 1.5%, 2%, 2.5% 급여한 처리구에서 12.6kg, 21.5kg, 29.0kg, 겨울에 총 증체량은 21.6kg, 28.0kg, 42.6kg을 나타냈고, 일당 증체량은 봄에는 0.23kg, 0.39kg, 0.54kg, 겨울에는 0.40kg, 0.52kg, 0.79kg을 나타내어 체중의 2.5%를 섭취한 구에서 높은 경향을 나타내었다. 내독 소는 농후사료 과다 섭취에 의해 그람음성균의 세포벽에 서 방출되는 물질로 봄에 시행한 시험에서 3주차 때 농 후사료를 체중의 2%와 2.5%를 급여한 처리구에서 유의 적으로 낮은 결과를 나타내었으나(p<0.05) 이후에는 점차 모든 처리구에서 수치가 비슷해져 적응하는 경향을 보여 모든 처리구가 농후사료 급여에 적응하는 경향을 보였다. 봄에 실시한 실험에서 8주차에 분 pH는 농후사료를 체 중의 1.5%, 2%, 2.5% 급여한 처리구에서 각각 6.2, 5.8, 5.7로 나타나 농후사료를 체중의 2%와 2.5%를 급여한 처 리구에서 유의적으로 낮은 결과를 나타내었다(p<0.05). 직장온도는 겨울에 실시한 실험에서 8주차에 농후사료를 1.5%, 2%, 2.5%. 급여구에서 각각 37.8℃, 37.9℃, 38.4℃ 를 나타내어 농후사료 2.5% 급여구에서 직장온도가 유의 적으로 높은 수치를 나타내었다(p<0.05). 분내 미생물에 서는 셀룰로오스와 탄수화물(구조 탄수화물) 분해에 관여 하는 미생물로 알려진 Fibrobacter가 체중의 1.5% 급여했 을 경우 총 미생물군에서 2.49%를 차지하였고, 2%와 2.5% 급여구에서는 각각 1.42%와 1.09%를 차지하여 농후 사료 급여량이 증가할수록 유의적으로 감소하는 경향을 보였다. 결론적으로 농후사료 2.5%의 급여가 비육마 사육 방법으로 활용할 수 있을 것으로 사료된다.

WC-CrC-Ni coatings were prepared by nine processes of the Taguchi program with three levels for the four spray parameters: spray distance, flow rates of hydrogen and oxygen, and powder feed rate. The optimal coating process (OCP) was oxygen flow rate of 38 FMR, hydrogen flow rate of 53 FMR, powder feed rate of 25 g/min, and spray distance of 7 inches. Hardness of 1150 Hv and porosity of 1.2 %, were obtained by OCP; these are better results compared with the highest 1033 Hv and the lowest 1.5% porosity obtained by nine processes of the Taguchi program. Friction coefficient of the WC-CrC-Ni coating decreased from 0.36 ± 0.07 at 25 oC to 0.23 ± 0.07 at 450 oC. These values were smaller than those of the EHC (electrolytic hard chrome) plating at both temperatures due to lubrication from the oxide debris. The wear trace and wear depth of the coating are smaller than those of the EHC at both temperatures. Pitting was not found in the WC-CrC-Ni coating sample, while it did appear in the EHC sample.

본 연구는 방사무늬김(Pyropia yezoensis) 사상체의 생장에 대한 단색광의 영향을 연구하기 위해 blue light(480 ㎚), green light(550 ㎚), yellow light(600 ㎚) and red light(730 ㎚)에서 방사무늬김(P. yezonesis)의 유리 사상체를 배양한 후 colony 직경, chlorphyll a 함량, 각포자낭 형성률을 측정하여 생장특성을 비교 분석하였다. 그 결과, colony 직경과 chlorophyll a 함량이 480(blue light) ㎚에서 각각 2,472.6±27.0 ㎛ and 1.55±0.03 mg g.dw-1로 최대값이 나타났고 각포자낭 형성률 역시 37.87±1.08 %로 blue light에서 최대값으로 확인되었다. 따라서 blue light는 다른 단색광(green, yellow, red light)에 비해 김 사상체의 성장 및 성숙을 촉진하는 데에 효과적으로 작용하며, 본 연구결과 는 향후 김의 실내 양식 기술 개발에 활용될 수 있을 것이라 사료된다

Foreign materials with a variety of types and sizes are found in food; thus, extraordinary efforts and various analytical methods are required to identify the types of foreign materials and to find out accurate causes of how they unintentionally enter food. In this study, human, cow, pig, mouse, duck, goose, dog, and cat were chosen as various types of animal hairs because they can be frequently incorporated into food during its production or consumption step. We morphologically analyzed them using stereoscopic, optical, SUMP method, and scanning electron microscopes, showing differences in each type. In addition, X-ray fluorescence spectrometer (XRF) was used to analysis chemical compositions (11Na~92U, Mass%) of samples. As a result, we observed that mammalian hairs were mainly composed of sulfur. Organic compounds of samples were further analyzed by fourier transform infrared spectroscopy (FT-IR) that can compare spectra of given materials; however, this method did not show significant differences in each sample. In this study, we suggest a rapid method for the identification of the causes and types of foreign materials in food.

This study was undertaken to evaluate the quality characteristics and antioxidant characteristics of commercially available mixed grains in Korea. The quality characteristics of mixed grain products studied were the mixing ratio, water binding capacity, water solubility, swelling power, and pasting characteristics. The antioxidant characteristics assessed the total polyphenol, flavonoid contents, DPPH and ABTS radical scavenging activities. The mixing ratio of commercially available mixed grain products consisted of 5~25 kinds of grains, with maximum products containing 15-grain products. The water binding capacity, water solubility, and swelling power in commercially available mixed grain products were 99.83~122.83%, 6.91~39.26% and 7.76~86.92%, respectively. The peak, trough, breakdown, final and setback viscosity were 31.53±20.17 RVU, 25.24±13.22 RVU, 6.29±7.43 RVU, 50.27±25.84 RVU and 18.74±8.68 RVU, respectively. Total polyphenol and flavonoid contents were 817.14~2,524.29 μg GAE/g and 06.36~1,099.09 μg CE/g, respectively. The DPPH and ABTS radical scavenging activities were 31.91~151.70 mg TE/100 g and 28.09~119.92 mg TE/100 g, respectively. Products with high phenol content and radical scavenging activity were found to contain greater proportion of brown rice, colored rice, barley and soybean.

The purpose of this study is to evaluate the clinical and radiographic features of Bisphosphonate-related osteonecrosis of the jaws(BRONJ). The clinical and radiographic features of 27 patients diagnosed with BRONJ from 2008 to 2012 were evaluated on the basis of the charts and panoramic radiographs and cone beam computed tomographs. As for clinical features, the following contents were evaluated; type of dental treatments before occurrence of BRONJ, the cause of taking bisphosphonate medicine, undergoing dental treatment, interval between dental treatments and symptom expression. As for radiological features, location of BRONJ, size of bone destructions and sclerosing of the surrounding bone, locational relationship between mandibular canal and inferior border of bone destruction, and effect on the maxillary sinus. In clinical features, extraction was done in 18 patients(66.7%), as the most common dental treatment before occurrence of BRONJ. The most common cause of taking bisphosphonate medicine was osteoporosis(20 pateints, 70.4%). The patients treated during bisphosphonate administration was 17(63.0%). The interval between dental treatments and symptom in the most patients(14 patients, 51.8%) was within 1 month. In radiological features, sequestrum was seen in 11 patients(40.7%) and bony sclerosing in 15(55.6%). The mean width of sclerosing was 32.9±12.4mm and mean height 17.5±4.4mm. Bone destruction invaded to inferior border of mandibular canal in 88.2%(15 among 17 mandibles),. Maxillary sinusitis was diagnosed in 57.1% among the evaluated maxillae(4 among 11 maxillae). In diagnosing BRONJ, clinicians should be cautious about medical history of patients and have well-knowledge of radiographic features.

The purpose of the study was to simplify standard HACCP manual for improving the on-site applicability and increasing the implementation rate of HACCP program for small- and medium-sized dairy farms (SMDF). A survey was carried out in 32 SMDFs using a structured questionnaire. The results indicated that the number of workers had a positive correlation with HACCP certifications (p < 0.05). Most of HACCP non-certified farms (66.7%) were run by two workers with 40-60 cows and milking yields of 1,000-1,500 L per day. Major drawbacks for dairy farmers to implement current HACCP system were the difficulties in daily recording and facility management (40%). On the basis of the survey results, it was suggested that the development of on-site standard HACCP manual and user-friendly record chart with O/X checklist were the most urgent factors to increase HACCP implementation rate. In addition, the alternative third party service for microbial and chemical tests could also be accompanied for small-sized dairy farms.

This study was conducted to develop an agent-based computing platform enabling simulation of on-farm produce contamination by enteric foodborne pathogens, which is herein called PPMCS (Preharvest Produce Microbial Contamination Simulator). Also, fecal contamination of preharvest produce was simulated using PPMCS. Although Agent-based Modeling and Simulation, the tool applied in this study, is rather popular in where socio-economical human behaviors or ecological fate of animals in their niche are to be predicted, the incidence of on-farm produce contamination which are thought to be sporadic has never been simulated using this tool. The agents in PPMCS including crop, animal as a source of fecal contamination, and fly as a vector spreading the fecal contamination are given their intrinsic behaviors that are set to be executed at certain probability. Once all these agents are on-set following the intrinsic behavioral rules, consequences as the sum of all the behaviors in the system can be monitored real-time. When fecal contamination of preharvest produce was simulated in PPMCS as numbers of animals, flies, and initially contaminated plants change, the number of animals intruding cropping area affected most on the number of contaminated plants at harvest. For further application, the behaviors and variables of the agents are adjustable depending on user’s own scenario of interest. This feature allows PPMCS to be utilized in where different simulating conditions are tested.

We have investigated the washing method of as-synthesized CdSe/ZnS core/shell structure quantum dots (QDs) and the effective surface passivation method of the washed QDs using PMMA. The quantum yield (QY%) of assynthesized QDs decreases with time, from 79.3% to 21.1%, owing to surface reaction with residual organics. The decreased QY% is restored to the QY% of as-synthesized QDs by washing. However, the QY% of washed QDs also decreases with time, owing to the absence of surface passivation layer. On the other hand, the PMMA-treated QDs maintained a relatively higher QY% after washing than that of the washed QDs that were kept in toluene solution for 30 days. Formation of the PMMA coating layer on CdSe/ZnS QD surface is confirmed by HR-TEM and FT-IR. It is found that the PMMA surface coating, when combined with washing, is useful to be applied in the storage of QDs, owing to its long-term stability.

This paper is concerned with a test method that can be used to investigate the parameters of the Johnson-Cook constitutive model. These parameters are essential for accurately analyzing material behavior under impact loading conditions in numerical simulation. Ti-6Al-4V alloy (HCP crytal structure) was used as a specimen for the experiments. In the 10−3-103/ s strain rate range, three types of experimental methods (convention, compression and tension) were employed to compare the differences using MTS-810, SHPB and SHTB. Finite element analysis results when applying these parameters were displayed along with the experiment results.

In order to prevent secondary pollution of tap water, corrosion characteristics are investigated, and corrosion index are calculated using LI and LR to manage corrosiveness. As targeted water treatment plants from 2014 (July, once) to 2015 (July and October, 2 times), 70 plants are selected by making a division for each area and water system. (treated water samples, n=240, raw water samples, n=72). In result of pH analysis, treated water was lower than raw water to 7.12, and 7.29, respectively. LI were investigated in the order of Seomjin river, Nakdong river, Han river, Geum river, to -2.08, -1.24, -1.11, -1.10 (at raw water), and -2.18, -1.59, -1.51, -1.35 (at treated water), respectively. In case of water quality goal value (LI = -1) in Japan as control of corrosiveness, management object was investigated about 83.3%.

Recently, advanced metering infrastructure (AMI) has been recognized as a core technology of smart water grid, and the relevant market is growing constantly. In this study, we developed all-in-one smart water meter of the AMI system, which was installed on the test-bed to verify both effectiveness and field applicability in office building water usage. Developed 15 mm-diameter smart water meter is a magneto-resistive digital meter, and measures flow rate and water quality parameters (temperature, conductivity) simultaneously. As a result of the water usage analysis by installing six smart water meters on various purposes in office building water usage, the water usage in shower room showed the highest values as the 1,870 L/day and 26.6 liter per capita day (LPCD). But, the water usage in laboratory was irregular, depending on the many variables. From the analysis of the water usage based on day of the week, the water usage on Monday showed the highest value, and tended to decrease toward the weekend. According to the PCA results and multivariate statistical approaches, the shower room (Group 3) and 2 floor man’s restroom sink (Group 1-3) have been classified as a separate group, and the others did not show a significant difference in both water use and water quality aspects. From the analysis of water usage measured in this study, the leak or water quality accident did not occur. Consequently, all-in-one smart water meter developed in this study can measure flow rate and water quality parameters (temperature, conductivity) simultaneously with effective field applicability in office building water usage.

Gas hydrate (GH)-based desalination process have a potential as a novel unit desalination process. GHs are nonstoichiometric crystalline inclusion compounds formed at low temperature and a high pressure condition by water and a number of guest gas molecules. After formation, pure GHs are separated from the remaining concentrated seawater and they are dissociated into guest gas and pure water in a low temperature and a high pressure condition. The condition of GH formation is different depending on the type of guest gas. This is the reason why the guest gas is a key to success of GH desalination process. The salt rejection of GH based desalination process appeared 60.5-93%, post treatment process is needed to finally meet the product water quality. This study adopted reverse osmosis (RO) as a post treatment. However, the test about gas rejection by RO process have to be performed because the guest gas will be dissolved in a GH product (RO feed). In this research, removal potential of dissolved gas by RO process is performed using lab-scale RO system and GC/MS analysis. The relation between RO membrane characteristics and gas removal rate were analyzed based on the GC/MS measurement.

Sewer condition assessment involves the determination of defective points and status of aged sewers by a CCTV inspection according to the standard manual. Therefore, it is important to establish a reliable and effective standard manual for identifying the sewer defect. In this study, analytic reviews of the CCTV inspection manuals of the UK, New Zealand, Canada and South Korea were performed in order to compare the defect codes and the protocols of condition assessment. Through this, we also established the standardized method for defect code and revised the calculation method of assigning the condition grade. Analyses of the types and frequencies of sewer defects that obtained by CCTV inspection of 7000 case results, showed that the joint defect and lateral defect were the most frequent defects that occurred in Korea. Some defect codes are found to be modified because those did not occur at all. This study includes a proposed new sewer defect codes based on sewer characteristics.

Phytoplankton community is one of the important factors for the management of aquatic environment due to generation of varying toxins by harmful algal species. This study was performed to examine the phytoplankton community structure (PCS) in the midstream of Geum River (GR) from January 2014 to December 2015. The water sampling was performed in five stations on 2014, and three stations on 2015. Subsequently, the morphological identification was performed by microscopic observation in laboratory condition. As results, total 265 species were identified and it was comprised of 40.8% of Bacillariophyceae, 9.1% of Cyanophyceae, 44.5% of Chlorophyceae, and the others (4.9%). During the investigation period, total average standing crop of phytoplankton was 12,948 cells mL-1, and it was comprised of 7,702 cells mL-1 of Bacillariophyceae, 2,821 cells mL-1 of Cyanophyceae, 2,121 cells mL-1 of Chlorophyceae, and 305 cells mL-1 of others. To verify which tributaries of upstream area influence on PCS of midstream of GR, the phytoplankton standing crops of two stations including Mihocheon (MH) and Gapcheon (GC) were examined on 2014, and compared to result of on 2015. The results were shown that the MH station had more similar phytoplankton standing crops with midstream of GR than GC station. The relationship between environmental parameters and phytoplankton dynamics was studied at the investigated station. As results, whereas water temperature and total phosphorus were represented the positive correlation, N/P ratio was remarkably exhibited negative correlation. From the results, it is suggested that the PCS of midstream of GR was more affected by MH station than GC station, and the changes of temperature, phosphorus concentration, and N/P ratio may be important factors on the PCS formation of midstream of GR.

This study was conducted to evaluate the possibility of expanding the usage of whole crop silage from beef cattle and dairy cow to hogs and chickens. For this purpose, a crushing device was developed to crush whole crop silage. The crushed silage was sealed, and analyzed for its feed value. The silage varieties used for the experiment included Saessal barley and Geumgang wheat. Whole crop barley and wheat were crushed in the crushing system as a whole without separating stems, leaves, grains, etc.. When the crushed whole crop silages (CWCS) were analyzed, full grain, grains above 10 mm in size, grains 5～10 mm in size, and grains below 5 mm in size accounted for, 20%, 4%, 27%, and 49 %, respectively. In order to facilitate the fermentation of CWCS, inoculated some fermenter into each CWCS sample (barley or wheat). As control, another set of sample was not inoculated. Crude protein (CP), ether extract (EE), crude fiber (CF), neutral detergent fiber (NDF), acid detergent fiber (ADF), lignin, cellulose content, total digestible nutrient (TDN), and relative feed value (RFV) of fermenter-inoculated Saessal barley were 2.45 %, 1.61%, 8.95%, 16.94%, 9.52%, 1.01%, 8.51%, 81.38%, and 447.5%, respectively. The CP, EE, CF, NDF, ADF, lignin, cellulose content, TDN, and RFV in the other sample of Saessal barley without inoculation of fermenter were 2.57%, 1.62%, 9.61%, 18.25%, 10.13%, 1.10%, 9.04%, 80.90%, and 412.9%, respectively. The CP, EE, CF, NDF, ADF, lignin, cellulose content, TDN, and RFV of fermenter-inoculated Geumgang wheat sample were 2.43%, 1.27%, 10.99%, 19.49%, 11.23%, 1.46%, 9.77%, 80.03%, and 382.6%, respectively. The CP, EE, CF, NDF, ADF, lignin, cellulose content, TDN, RFV of the other set sample of Geumgang wheat sample without the inoculation of fermenter were 2.28%, 1.44%, 10.08%, 18.02%, 10.44%, 1.26%, 9.18%, 80.65%, and 416.9%, respectively. The TDN and RFV content in the fermenter-inoculated Saessal barley were 81.38% and 447.5%, respectively, while the one in the fermenter-inoculated Geumgang wheat were 80.03% and 382.6% respectively. When the feed value of whole crop barley and wheat silage without crushing process was compared to the feed value of whole crop barley and wheat silage made from crushing system, the latter appeared to be higher than the former. This could be due to the process of sealing the crushed silage which might have minimized air content between samples and shortened the golden period of fermentation. In conclusion, these results indicate that a crushing process might be needed to facilitate fermentation and improve the quality of silage when making whole crop silage.

This study compared the stability of odor compounds in three different types of polymer sampling bags. Tedlar, PET (polyethylene terephthalate) and aluminized polyester bag were used. A sample was collected from the interior of a new automobile which was parked in an outdoor parking lot. It was found that the Tedlar bag showed lower stability for odor active compounds than the PET bag. Meanwhile, the PET bag had good stability for odor compounds compared to the aluminized polyester bag. The PET bag showed a stability for the molecules smaller than toluene that was comparable to the canister, but showed a lower recovery for molecules bigger than C7. The FID signal of the sample in the PET bag was reduced by 1.7times after 3days storage compared to 24 h storage. The number of detected odor active compounds was reduced by half, and odor intensity was also decreased by 2~3 degrees. Considering the factors of repeated use, usability and price, a PET bag covered with a black plastic bag was the most appropriate approach for odor sampling in an automobile interior.