For important structures such as nuclear power plants, In-Structure Response Spectrum (ISRS) analysis is essential because it evaluates the safety of equipment and components installed in the structure. Because most structures are asymmetric, the response can be affected by eccentricity. In the case of seismically isolated structures, this effect can be greater due to the difference between the center of mass of the structure and the center of rigidity of the isolator layer. Therefore, eccentricity effects must be considered when designing or evaluating the ISRS of seismically isolated structures. This study investigated the change of the ISRS of an isolated structure by assuming accidental eccentricity. The variables that affect the ISRS of the isolated structure were analyzed to see what additional impact they had due to eccentricity. The ISRS of the seismically isolated structure with eccentricity was amplified more than when there was non-eccentricity, and it was boosted more significantly in specific period ranges depending on the isolator’s initial stiffness and seismic intensity. Finally, whether the displacement requirement of isolators can be applied to the variation of the ISRS due to eccentricity in the design code was also examined.

In this study, complaints from visitors in the science museum satisfaction survey were categorized into four primary factors and ten sub-factors. This categorization aimed to provide recommendations for enhancing the Geochang Wolseong Space Creative Science Museum as an illustrative case study. Futhermore, the study examimed the relative importance of each factor by surveying 90 science museum visitors. The following results are obtained. Firstly, it was evident that the Geochang Wolseong Space Creative Science Museum requires urgent improvement. Certainly, in the primary factors, issues related to the utilization environment emerged as the most significant sources of dissatisfaction, while in the sub-factors, the adequacy of fees was identified as the most prominent concern. Secondly, through the result of the IPA (Importance-Performance Analysis) of the complaint factors, four primary issues were identified as top priorities for consideration: fare adequacy, lack of convenient facilities, in sufficient publicity, and a lack of distinctiveness compared to similar facilities. Lastly, when analyzing the relationship between complaints and overall satisfaction, factors related to human service, environment, and educational content had negative effects. In contrast, factors associated with science museum operation exhibited a different trend, suggestinga structural impact relationship with the overall impact of complaints.

췌장암은 항암화학요법의 발전에도 불구하고 여전히 예후가 좋지 않으며, 5년 생존율은 13.9%에 불과하다. 저자들은 61세 여성 환자에서 고식적 항암화학요법 후 췌장암에 대한 완전관해가 이루어진 증례를 보고하는 바이다. 환자는 1개월 동안의 소화불량과 2 kg의 체중 감소 증상을 호소하여 내원하였고, 컴퓨터 단층촬영 검사에서 췌장 머리 부위에 18 mm 크기의 종괴가 확인되었다. 혈액검사 결과에서 간 기능 검사는 정상이었으나, CA 19-9 및 CEA 수치가 각각 3,965 U/mL와 38.2 ng/mL로 상승되어 있었다. 조직 획득을 위해 내시경초음파 유도 세침흡인조직검사를 시행하였고, 병리학적 검사 결과 췌장선암으로 확인되었다. 양전자 방출 단층촬영 및 췌장 자기공명영상을 포함한 추가적인 평가를 통해 간의 6번째 분절과 복막하부 림프절에 전이성 종괴가 확인되었다. 최종적으로, 환자는 4기 췌장암으로 진단되었다. 환자에게 보존적 화학요법으로 폴피리녹스 투여하였고, 치료 1년 후 잔여 종양은 사라졌다. 이후 수술 치료를 시행하였고, 현재 보조 항암화학요법을 시행중이다. 전이성 췌장암에서 항암화학요법으로 완전관해를 이룬 사례는 매우 드문 증례이기에 문헌고찰과 함께 보고하는 바이다.

The effects of punching treatment on mycelial culture and fruiting body productivity were investigated in a new Lentinula edodes cultivar, “Jadam”, in sawdust medium for the stable production of oak mushroom. As the punching volume and number increased, the weight loss rate and color difference increased and the L value decreased. After spawn inoculation, the sawdust medium temperature and CO2 concentration reached their highest values at 33 and 19 days of incubation, respectively. The O2 concentration showed the lowest value on the 14th day of incubation, which was the opposite pattern to the CO2 concentration. As the punching volume and the number increased, the medium temperature and O2 concentration increased, and the CO2 concentration decreased. Higher punching volumes and numbers resulted in higher temperatures and lower CO2 concentrations. The best fruiting body yield was 5 × 70 mm - 30 (punching diameter × depth - number), and the total yield after three cycles was 644.7 g.

A new spore-less cultivar Lentinula edodes ‘Daedam’ was bred from monokaryotic strains of ‘LE15401-24’ and ‘LE192118-10’. The optimum temperature for mycelial growth of ‘Daedam’ on potato dextrose agar was 22~25oC. Total cultivation period of the new cultivar, from inoculation to its first harvest, was 134 days, similar to that of the control cultivar ‘Hwadam’. Total yield of ‘Daedam’ was 222g per 3kg substrate, and was lower than that of control cultivar(266.0g). The fruiting body of ‘Daedam’ had a thick and small pileus and a longer stem compare to control cultivar. As a result of a analyzing the productivity of ‘Daedam’ on the different substrate types, the biological efficiency was 26.7% in the 1.2kg cylindrical substrate(CS), which was higher than that of the 3kg rod-type substrate(RS). 'Daedam' had a similar yield compared to 'Hanacham' in first fruiting body production, but the cultivation period was 40 days shorter. Therefore, 'Daedam' can only harvest fruiting bodies once, it is thought that it can be used as spore-less oak mushroom cultivar for short-term cultivation instead of 'Hanacham' in mushroom farms.

This study was conducted to reduce the phenomenon of the biased cultivation of certain mushroom varieties and to develop a competitive variety of Pleurotus nebrodensis. We have collected and tested characteristics of genetic resources from domestic and overseas varieties since 2015. We bred the domestic variety ‘Boram’. The optimal temperature was 26~29oC for mycelial growth and 15~18oC for fruit body growth temperature. This variety was similar to the control variety (Uram) in terms of the number of cultivation days and yield per bottle. The shape of the new cultivar was round, whereas that of the control group was spatula-like. The yield was 181.1 g/bottle, which was statistically similar to that of the control variety. When incubating the parent and control varieties, the replacement line was clear. Moreover, polymerase chain reaction analysis of mycelial DNA resulted in different band patterns between the parent and control varieties, confirming the hybrid species.

Light plays an important role in fruit-body development and morphology during Pleurotus spp. cultivation. To understand the effects of light color on fruit-body properties, we evaluated the fruit-body characteristics of Pleurotus spp. varieties cultivated under blue, red, and purple LED light sources. The main results are as follows: The overall fruit-body shape showed differences depending on the color of the LED light. The fruit-bodies of mushroom cultivated under blue and purple light were generally similar to the mushroom shapes typically produced, while those of mushroom cultivated under green light were abnormally shaped, probably due to the absence of effective light source. The average cap lightness of mushrooms cultivated under blue, green, and purple LED lights was 57.0, 57.4, and 59.4, respectively. The average cap lightness of all varieties except Wonhyeong1ho and Hwang-geumsantari cultivated under the three LED light sources were statistically significantly different (P<0.05). The cap redness varied significantly depending on the LED lighting and variety. Only Gonji7hoM, the cap color mutant of Gonji7ho, showed negative cap redness values under all three LED light sources. Among the eight varieties excluding Gonji7ho, the highest cap redness was observed when cultivated under the blue LED. The average harvest weight of the varieties cultivated under purple, blue, and green LED light were 68.0, 58.3, and 50.1 g, respectively. The yield of Gonji7ho, the mushroom variety with the highest yield, cultivated under blue, green, and purple LED light were 92.8, 77.1, and 98.6 g, respectively. The earliness when grown under the purple, blue, and green LED lights were 5.3, 5.8, and 5.8 days, respectively. Among the varieties, six, three, and two cultivars showed the shortest earliness under the purple, green, and blue LED, respectively. The fruit-body lengths were 66.4, 51.8, and 46.8 mm when cultivated under green, purple, and blue lights, respectively. These results are expected to serve as a foundation for producing mushrooms with traits demanded in the market.

The influence of MgO addition on the densification and microstructure of alumina (Al2O3) was studied. Compacted alumina specimens were manufactured using ball-milling and one-directional pressing followed by sintering at temperatures below 1700oC. Relative density, shrinkage, hardness, and microstructure were investigated using analytical tools such as FE-SEM, EDS, and XRD. When the MgO was added up to 5.0 wt% and sintered at 1500oC and 1600oC, the relative density exhibited an average value of 97% or more at both temperatures. The maximum density of 99.2% was with the addition of 0.5 wt% MgO at 1500oC. Meanwhile, the specimens showed significantly lower density values when sintered at 1400oC than at 1500oC and 1600oC owing to the relatively low sintering temperature. The hardness and shrinkage data also showed a similar trend in the change in density, implying that the addition of approximately 0.5 wt% MgO can promote the densification of Al2O3. Studying the microstructure confirmed the uniformity of the sintered alumina. These results can be used as basic compositional data for the development of MgOcontaining alumina as high-dielectric insulators.

The oyster mushroom is a widely cultivated edible mushroom in Korea. It is a regionally specialized crop in Gyeonggi-do, where 68% of the national production is produced. The present study was conducted to develop a new, highquality cultivar with stable cultivation. ‘Manseon’ is a new variety of oyster mushroom suitable for bottle culture. It was produced by mating monokaryons isolated from ‘HB-18’ and ‘P15159-16’. The optimal temperature for ‘Manseon’ mycelial growth was 26–29 °C on potato dextrose agar (PDA) medium and for primordia formation and the growth of fruit bodies the optimal temperature was 18–19 °C on sawdust medium. Spawn running required 30 d, primordia formation required 4 d, and fruit body growth in the bottle culture required 4 d. Regarding the characteristics of the fruit bodies, the pilei were round and dark grayish brown, stipe color was white, and stipe shape was short and thick. The yield per bottle was 192.7 g/1,100 cc, which was 9% higher than that of the control strain (Suhan-1ho). The physical properties of springiness, cohesiveness, gumminess, and brittleness of stipe tissue were 87.9%, 77.4%, 445.1 kgf, and 389.6 kgf, respectively.

Modular construction is an economical and efficient construction that reduces time and costs by manufacturing units in factories and constructing them on site. Currently, the demand for modular construction is increasing not only abroad but also domestically. As the demand for modular construction increases, a lot of development and research on connections between modular units are being conducted. Connections between modular units should be quick and simple to assemble when assembling units on site, and should be in a form that allows each unit to be connected regardless of direction. In addition, it must be able to exert sufficient strength against external loads. In this study, a connection between modular units using connecting steel plates and bolts was proposed, and the nonlinear behavior of the connection to external lateral force was analyzed through finite element analysis, and resistance performance was evaluated.

Lactococcus garvieae is a Gram-positive cocci that has been known to be a fish pathogen, and considered as a low virulence organism rarely associated with human infection. We report a case of acute cholangitis with common bile duct (CBD) stone and bacteremia by L. garvieae bacteremia in a 70-year-old male. The patient presented with epigastric pain and was diagnosed with two CBD stones. Blood culture obtained prior to empiric antimicrobial therapy with ceftizoxime sodium showed growth with Escherichia coli and L. garvieae. The bacteria were confirmed by matrix-assisted desorption/ionization time-of-flight mass spectrometry. Initial attempt at endoscopic biliary drainage failed, and the patient underwent percutaneous transhepatic biliary drainage and subsequent stone removal. He occasionally ingested raw fish and had a history of gastric ulcer with acid suppression therapy, which could be possible risk factors for L. garvieae infection. This is the first case of L. garvieae bacteremia in acute cholangitis.

A fixed-point iteration is proposed to integrate the stress and state variables in the incremental analysis of plastic deformation. The Conventional Newton–Raphson method requires a second-order derivative of the yield function to generate a complicated code, and the convergence cannot be guaranteed beforehand. The proposed fixed-point iteration does not require a second-order derivative of the yield function, and convergence is ensured for a given strain increment. The fixed-point iteration is easier to implement, and the computational time is shortened compared with the Newton–Raphson method. The plane-stress condition is considered for the biaxial loading conditions to confirm the convergence of the fixed-point iteration. 3-dimensional tensile specimen is considered to compare the computational times in the ABAQUS/explicit finite element analysis.

민원은 도시를 관리하는 데 있어 고려해야 할 요소 중 하나이다. 마찬가지로, 도시공원은 도시민들의 생활과 밀접한 존재로서 정책적으로도 중요한 위치에 있다. 도시공원에서 행정의 대응을 개선하기 위해서는 도시민들의 도시공원 민원을 파악하고 관리해야 한다. 본 연구에서는 충청남도 아산시의 도시공원에 대한 전자민원을 분석하여 인식과 문제점들을 도출하고 해결 및 관리방안을 제안하고자 한다. 또한, 전자민원에 대한 일련의 분석과정에 대해서도 논하고자 한다. 아산시의 도시공원 민원을 분석하기 위해 텍스트 마이닝과 소셜 네트워크 분석을 사용했으며, 키워드의 출현빈도, 네트워크, 클러스터를 활용하였다. 향후 본 연구에서 제시된 연구 방법을 통해 지역별 민원에 대해서 분석한다면 지자체의 민원 행정에 대한 대응을 할 수 있을 것이다. 또한 민원에 대한 우선순위 결정과 해결 방안을 제시할 수 있을 것으로 사료된다.

The present study investigated the optimum additive ratio of wheat straw pellet as a substitute for beet pulp during oyster mushroom cultivation. The chemical properties across treatments were pH of 4.8–5.5, total carbon content of 45.9–46.5%, total nitrogen content of 1.5–1.7%, and carbon-to-nitrogen ratio of 27.8–31.0. Mycelial growth was the fastest in a medium containing 20% wheat straw pellet (at 88.2 mm in ‘Heuktari’ and 70.3–79.6 mm in ‘Suhan-1Ho’); however, there were no significant differences in mycelial density among the treatments. The characteristics of fruiting bodies by variety were as follows. In ‘Heuktari’, the valid stipe number per bottle (1,100 cc) was 22.5 and yield was 177.1 g/1,100 cc in the mixed medium containing 10% wheat straw pellet, with the values being comparable to those of controls. In ‘Suhan-1Ho’, the valid stipe number per bottle (1,100 cc) was 14.0 and yield was 151.2 g/1,100 cc in the mixed medium containing 10% wheat straw pellet, with the values being comparable to those of controls.

Mushroom production in Korea is concentrated on five major mushroom types. To create a new source of income for farmers, it is necessary to establish new mushroom production and marketing systems. This study was conducted to evaluate the marketability of and establish a marketing strategy for Pleurotus nebrodensis variety 'Uram'. The evaluation of distributors showed that it was necessary to cultivate mushrooms of uniform shape and size, to compensate for their low storability, and to sell them in small packages. The consumer evaluation showed that the texture of P. nebrodensis had the highest level of satisfaction for quality, but the levels of satisfaction for size and shape were low. In the consumer evaluation, as in the distributor evaluation, improvements in cultivation were found to be necessary, as the storage time is short due to a high moisture content. An evaluation of the market gave the following results regarding the marketing strategy. It was found to be necessary to consider the production of mushrooms of a uniform shape and size and sell them in small packages in the range of 150 to 300 g. The price of the mushrooms should be set using a high-end strategy for high-end sales. The mushrooms should be introduced to local food and eco-friendly stores in the early stages of production. Subsequently, if farmhouse production increases, shipments should be made to wholesale markets through a regular contract. Finally, considering that P. nebrodensis is an unfamiliar mushroom to consumers, it is necessary to promote it by increasing the accessibility of consumers through tasting events and experience groups.

This study was conducted to investigate the optimum supplementation ratio when replacing cotton seed meal with rapeseed meal for cultivating oyster mushrooms. The chemical properties among the treatments were pH 4.5~4.7, total carbon content was 46.3~46.5%, total nitrogen content was 1.6~1.7%, and carbon-nitrogen ratio was 27.0~27.8. These did not differ significantly from the control. Mycelial growth was 85.1 mm (Heuktari), and 72.8 mm (Suhan-1Ho) in medium containing 5% rapeseed meal, with no significant difference in mycelial density between cultivars. Fruiting body characteristics are as follows: In 'Heuktari', the color of the pileus was darker than control with an L value of 32.5, and pileus thickness and diameter were 3.2 mm and 27.6 mm, respectively. Stipe length and diameter were 86.0 mm and 9.1 mm, respectively. Valid stipe number per bottle (1,100 cc) was 25.9, and a yield of 189.7 g/1,100 cc was recorded in mixed medium containing 5% rapeseed meal (higher than control). In mixed medium containing 10% rapeseed meal, the yield was 184.5 g/1,100 cc (comparable to control). In 'Suhan-1Ho', supplemented with 5% rapeseed meal, pileus color was darker than control color, with an L value of 28.8. Pileus thickness was 4.5 mm. Stipe diameter was 12.3 mm (higher than control), and yield was 145.5 g/1,100 cc (comparable to control).

This study was conducted to diversify the cultivation of mushroom items and develop a competitive variety of Hypsizigus marmoreus. We focused on developing Hypsizigus marmoreus with lower bitterness, likable shape, and high yield. We have collected and tested characteristics of genetic resources from domestic and abroad since 2019. Breeding (2019), characterization (2020), productivity test (2021), and farm demonstration test (2021) have been sequentially conducted. We bred the new variety ‘Yunseul’ with unique traits. The optimal temperature for mycelial and fruit body growth were 22–25oC and 15– 18oC, respectively. It was similar to the control variety (Mangadak-2Ho) in the pileus form (hemispherical shape) and the cultivation period. However, it was thinner and longer than the control variety with the pileus diameter, thickness, stipe diameter, and length being 19.9 mm, 7.0 mm, 9.4 mm, and 86.3 mm, respectively. The effective number of fruit bodies was 47.8 in bottle cultivation, which was more than that of the control variety. The yield was 197.4 g/bottle (1,100 cc), which was 30% higher than the yield of the control variety, 151.9 g/bottle (1,100 cc). The parent and control varieties were also incubated alongside the new variety. The somatic incompatibility line was distinct. The band pattern in the mycelial DNA PCR reaction was different from that of the parent and control varieties, confirming the hybrid species.

This study was conducted to reduce the phenomenon of biased cultivation and to pursue the diversification of mushroom items. We focused on developing Sparassis latifolia varieties with a short cultivation period, stable pinheading, and a high yield. We have collected and determined the characteristics of genetic resources domestically and abroad since 2016. We bred the unique domestic variety, “Hanyeoul” and the results of this study are as follows. The optimal temperatures for mycelial growth and fruit body growth were 22~25oC and 19~21oC, respectively. The color of the pileus was pale-yellowish white, which was similar to the color of the control variety, “Neoul”. The number of days required for cultivation was 125 for bottle cultivation and 98~102 for bag cultivation, which was shorter than the number of days required for the control variety. Bottle cultivation took 39 days shorter for the new variety than the control variety. The fruiting body of the new variety was similar in size or larger than that of the control variety. The pinheading rate was more than 90% in bottle cultivation and bag cultivation, which was more stable than pinheading in the control variety. The yield was 79.1 g/bottle (1,100 cc) for bottle cultivation, which was 22.6% higher than the yield of the control variety, and 641.1~689.5 g/bag (2.6 kg) for bag cultivation, which 5.8~10.4% higher than yield of the control variety.