This study evaluated the effects of solid and water-soluble extracts derived from torrefied Pinus densiflora on lettuce (Lactuca sativa) germination and growth, as well as the cultivation efficiency of torrefied materials combined with plant nutrient solutions. Torrefied samples were prepared under various conditions (200°C, 220°C, 240°C for 20–80 minutes) and mixed with sand at ratios from 20% to 100%. Liquid extracts were formulated with macronutrients (N, P, K, Mg) and micronutrients (Mn, B, Fe, Cu) and applied to leafy and root vegetables. Germination tests showed that 60% and 80% torrefied treatments had the highest and most consistent rates, with torrefied samples promoting more rapid and stable germination than controls. A two-way ANOVA indicated a significant interaction between treatment and concentration (p = 0.043), suggesting concentration-specific effects. While shoot length showed no significant difference, root growth was marginally significant (p = 0.064), with washed torrefied material producing the longest roots. Physical analysis revealed that torrefied materials improved soil thermal retention and moisture-holding capacity. However, increasing torrefied content reduced porosity, likely due to fine particles filling soil pores. In conclusion, torrefied P. densiflora materials exhibit strong potential to enhance germination, root development, and soil condition. Optimal results were achieved with 40–60% solid mixtures for germination and 60–80% diluted extracts for rapid and consistent seedling growth. When optimally applied, they may serve as effective, sustainable amendments in cultivation systems.

This study investigates the factors influencing the seed longevity of Quercus myrsinifolia, a species with recalcitrant seeds highly sensitive to desiccation and freezing. The effects of moisture content, seed collection date, and storage methods on seed viability were analyzed using exponential decay modeling. Interactions between these factors were also explored to refine conservation strategies. Seeds with moisture content above 40% demonstrated a predicted seed longevity of 2.19 years, whereas those with moisture content below 30% had seed longevity of less than 1 year. Late-season seeds collected in November and December exhibited superior germination percentages and longer predicted seed longevity (1.32 years) compared to early-season seeds collected in September and October (<1 year). In seed weight, large seeds (2.0 g) showed longer predicted seed longevity about 1.5 times greater than that of small seeds (<1.2g). Storage methods significantly affected seed longevity, with refrigerator (4°C) with silica gel maintaining viability for 2–3 years, while seeds stored at room temperature (25°C) exhibited a seed longevity of less than 1 year. Silica gel was found to prevent seed deterioration due to over-desiccation, emphasizing the importance of balanced moisture regulation. Q. myrsinifolia seeds exhibited 𝑏 values ranging from 0.30 to 2.04, demonstrating a close relationship between decay constant, moisture content, storage conditions, and seed longevity. These findings provide critical insights into optimizing seed storage and propagation strategies for Q. myrsinifolia, contributing to its conservation and ecological restoration efforts.

This study investigated the morphological characteristics and regional variations of leaves, flowers, and seeds of Quercus myrsinifolia Blume to understand its ecological adaptation and the effects of environmental factors. Samples were collected from Jinju, Hapcheon, and Sancheong, and nine leaf traits, six flower traits, and five seed traits were analyzed. Significant regional variations were observed, with Hapcheon exhibiting the largest leaf and flower sizes, while Sancheong showed the largest and heaviest seeds. Jinju recorded the smallest values for most traits. Principal Component Analysis (PCA) revealed distinct regional groupings, with Hapcheon displaying intermediate traits, Sancheong larger traits, and Jinju smaller traits. Correlation analysis identified strong positive relationships between leaf length and width, seed length and weight, and the number of staminate flowers and catkin width, highlighting key indicators for growth. Climate factors such as temperature and precipitation significantly influenced morphological traits, with higher temperatures negatively affecting leaf and seed sizes, while precipitation showed a weak positive correlation with seed weight. Among soil factors, pH and magnesium content were closely related to morphological traits. pH exhibited a negative correlation with leaf length and petiole length, while magnesium showed a positive correlation with seed weight and leaf width. These findings underscore the significant role of environmental factors in morphological variation and provide valuable insights for developing regionally adaptive breeding strategies. These findings provide foundational data for developing region-specific breeding strategies and cultivars for Q. myrsinifolia, contributing to ecological management and climate change adaptation strategies.

Since rice is the main food in Korea, there are no regulations on corn milling yet. Corn is known as one of the world's top three food crops along with wheat and rice, and it is known that 3.5 billion people worldwide use corn for food. In addition, corn mills are not developed or sold in Korea, but the use of corn mills is increasing significantly in many countries in Southeast Asia. In the Philippines, as Korea's rice mill import increases, Korea's KAMICO (Korea Agricultural Machinery Industry Cooperative) and domestic company A agreed to develop a corn mill jointly with PHilMech, an organization affiliated with the Philippine Ministry of Agriculture. However, research on corn milling was very insignificant, so the development was carried out based on the technology of Korea's rice mill. Rice milling is performed by peeling off the skin of rice and producing brown or white rice, so it is carried out by removing the skin and cutting the skin. On the other hand, in the corn mill, the skin of the corn is peeled, pulverized and selected to produce main products suitable for edible use. Therefore, in order to develop a corn mill, processes such as peeling, transfer, grinding, sorting, and by-product separation are required, and suitable parts must be developed. In addition, the performance must be gradually improved through experiments in which corn is repeatedly milled. The Philippines produces 7.98 million tons/year of corn, which is about 100 times that of Korea, and is mostly consumed as a staple food. This is about 10% of the total crop production in the Philippines. In addition, the main cultivation complexes of corn are the mountainous regions of Tarlac or Pangasinan, and the produced corn is 72.4% of the so-called yellow corn called Arabel and Sarangani, and the remaining 27.6% are known as white corn. In this study, it was intended to produce grains of 2.5 mm or less suitable for food for yellow corn and to develop a corn mill for 200 kg per hour. Detailed conditions for development are stipulated as more than 55% of the main product recovery rate, more than 31% of the by-product recovery rate, less than 5% of the raw material loss rate, and more than 80% of the embryo dislocation rate. In this study, to achieve this, the overall process of the corn mill was developed, and the optimal conditions for the corn mill were obtained through the development of parts and empirical tests to improve performance. In addition, it was intended to achieve the development goal by evaluating and analyzing the performance of each part so that it did not conflict.

The chemical composition of 86 species of native plants in Korea, including plants to be afforestation, was analyzed. The chemical composition of the species analyzed was different. The species with the highest extractable content was Viburnum dilatatum (3.91%), and the species with the lowest extractable content was Ligustrum lucidum (0.11%). The lignin content ranged from 12 to 39%, with an average of 25%. The species with the highest lignin content was Chaenomeles lagenaria (39.37%). Hemicellulose content ranged from 18 to 52%, with the highest species being Thuja occidentalis (51.22%) and Eucommia ulmoides (48.84%). Cellulose content ranged from 25 to 58%, and the species with the highest content were Prunus serrulata (57.67%), Diospyros kaki (57.14%), Aesculus turbinata (53.29%), Albizia julibrissin (53.02%), and Zelkova serrata (52.29%). The chemical composition was different for each use taxon of 86 plant species. The lignin content was the highest in the fruit group and the lowest in the group other than recommended species for afforestation. Cellulose content was highest in non-reforestation-recommended tree species and lowest in fruit trees. In classification according to tree height, lignin content was higher in shrubs than in tall trees, and cellulose content was highest in tall trees. Between deciduous and evergreen trees, the lignin content was high in deciduous trees (26.46%), and the cellulose content was also high in deciduous trees (44.01%). As a result of analyzing the correlation between each compound, there was a difference. There tended to be a positive correlation between extractives and lignin content. There was a negative correlation between extractives and holocellulose content, hemicellulose and cellulose. The higher extract content affected the cellulose content much more than hemicellulose. Also, the higher the lignin content, the lower the cellulose content. The species with low lignin content and high cellulose content were Diospyros kaki and Prunus serrulata var. spontanea. This result is expected to be primary data for bioenergy, pulp industry and bioindustry.

Although ethylformate and phosphine fumigants are widely used for pest quarantine, studies related to their mechanism of action and metabolic physiological changes in Drosophila models are still unclear. In this study, we investigated how key metabolites altered by fumigants and cold treatment are associated with and affect insect physiology by comparative metabolome analysis. Fumigant treatment significantly altered cytochrome P450 and glutathione metabolites involved in the detoxification mechanism and showed lower expression of PGF2α involved in the immune response compared to the control. Additionally, most of the metabolites functioned in metabolic pathways related to the biosynthesis of amino acids, nucleotides and cofactors.

Background: The grading of Hanwoo (Korean native cattle) is based on four economic traits, and efforts have been continuously made to improve the genetic traits associated with these traits. There is a technology to predict the expected grade based on the 4 economic genetic SNP characteristics of Korean cattle calves using single nucleotide polymorphism (SNP) technology. Selection of highly proliferative, self-renewing, and differentiating satellite cells from cattle is a key technology in the cultured meat industry. Methods: We selected the Hanwoo with high and low-scored of genomic estimated breeding value (GEBV) by using the Hanwoo 50K SNP bead chip. We then isolated the bovine satellite cells from the chuck mass. We then conducted comparative analyses of cell proliferation, immunocytochemistry, qRT-PCR at short- and long-term culture. We also analyzed the differentiation capability at short term culture. Results: Our result showed that the proliferation was significantly high at High scored GEBV (Hs-GEBV) compared to Low scored GEBV (Ls-GEBV) at short- and long-term culture. The expression levels of Pax3 were significantly higher in Hs-GEBV bovine satellite cells at long-term culture. However, there were no significant differences in the expression levels of Pax7 between Hs- and Ls-GEBV bovine satellite cells at short- and long- term culture. The expression levels of MyoG and MyHC were significantly high at Ls-GEBV bovine satellite cells. Conclusions: Our results indicated that selection of bovine satellite cells by Hanwoo 50K SNP bead chip could be effective selection methods for massive producing of satellite cells.

The slaughter of livestock is inevitably required to obtain meat products from livestock. Since slaughter means pain and death for animals, reducing the pain and distress of animals during slaughter is very important from a perspective of animal welfare based on the principle of respect for life. Generally, two stunning methods, CO2 stunning and electrical stunning, are used for slaughter. When the carotid arteries of the lungs are cut off for bleeding, the bronchial tubes are also severed. To determine the degree of blood inflow into the lungs through the severed bronchial tubes, the prevalence rates of pulmonary diseases and pulmonary congestion in slaughtered pigs were analyzed. In this study, the prevalence of pneumonia was 24.9% in Slaughterhouse A using the gas method, but it was decreased by about 10% to 15.7% and 12.6%, respectively, in Slaughterhouses B and C using the electric method. On the other hand, the prevalence of pulmonary congestion in Slaughterhouses A, B, and C was 4.24%, 14.10% and 16.40%, respectively. In other words, the prevalence of pulmonary congestion was higher by about 10% in the groups of pigs slaughtered by the electric method (Slaughterhouses B and C) than in the group of pigs slaughtered by the gas method (Slaughterhouse A). These results indicate that blood inflow into the pulmonary alveoli led to a diagnosis of pulmonary congestion instead of pneumonia in some pigs with pneumonia. In short, it was found that about 10% of pigs stunned by the electric method were not in a state of complete unconsciousness but in a partially conscious state during slaughter. It is suggested that slaughterhouses should be equipped with gas stunning equipment instead of applying the electric method due to lower costs.

무삼투압차 역삼투압(Δπ= 0)은 KAIST H. N. Chang 명예교수가 2013년 발명, 2014년 미국 특허 출원, 2018년 특 허 취득(US 9,950,297) 해수담수화기술. Chang 등의 RO 기술은 삼투압 조정조와 저압 역삼투압의 2 챔버로 구성. Chang 등은 소금물을 비롯한 모든 수용액은 물과 용질(소금)로 완전 분리 가능 주장. 삼투압차 조정조, 저압 역삼투압조 2 챔버로 구성됨. 고농도 용액의 삼투압은 1908년 미국화학회지 출간된 MIT G. N. Lewis식 이용. 두 번째 특허(US 10,953,3367)에서 RO가 10~12 bar 저 삼투압차 수행 가능 증명. 세 번째 특허(Korea 10-2322755, 해외 출원 중) Singularity ZERO 활용하면 기존 RO 에 비해 물은 50% 추가, 막 면적은 1/3, 이론에너지는 1/5, 동일 용량의 S-ZERO 기술은 기존 RO 건설비의 50~60%로 예측됨.

A pregnancy diagnosis is an important standard for control of livestock’s reproduction in paricular dairy cattle. High reproductive performance in dairy animals is a essential condition to realize of high life-time production. Pregnancy diagnosis is crucial to shortening the calving interval by enabling the farmer to identify open animals so as to treat or re-breed them at the earliest opportunity. MicroRNAs are short RNA molecules which are critically involved in regulating gene expression during both health and disease. This study is sought to establish the feasible of circulating miRNAs as biomarkers of early pregnancy in cattle. We applied Illumina small-RNA sequencing to profile miRNAs in plasma samples collected from 12 non-pregnant cows (“open” cows: samples were collected before insemination (non-pregnant state) and after pregnancy check at the indicated time points) on weeks 0, 4, 8, 12 and 16. Using small RNA sequencing we identified a total of 115 miRNAs that were differentially expressed weeks 16 relative to non-pregnancy (“open” cows). Weeks 8, 12 and 16 of pregnancy commonly showed a distinct increase in circulating levels of miR-221 and miR-320a. Through genome-wide analyses we have successfully profiled plasma miRNA populations associated with pregnancy in cattle. Their application in the field of reproductive biology has opened up opportunities for research communities to look for pregnancy biomarker molecules in dairy cattle.

인류의 에너지 수급은 항상 인간의 삶에 중요한 문제이며, 최근에는 전기 생산 및 공급 문제로 이어지고 있다. 이에 관련하여 본 연구에서는 에너지 저장장치의 일환으로 슈퍼커패시터 용도의 고체 전해질막을 제조하였다. 제조한 전해질막 은 poly(vinyl alcohol) (PVA) 주사슬에 poly(oxyethylene methacrylate) (POEM) 곁사슬을 그래프팅하여 사용하였으며, 그래프팅은 자유 라디칼 중합법을 통해 합성하였다. 본 연구에서 사용한 PVA-g-POEM 가지형 공중합체를 슈퍼커패시터 전해질에 적용한 사례는 처음이다. POEM 그래프팅을 통해 PVA가 고유하게 가지고 있던 구조가 변화하였으며, 이를 FT-IR을 통해 분석하였다. 또한, 합성한 공중합체를 이용한 슈퍼커패시터 성능은 cyclic voltammetry (CV), galvanostatic charge/discharge (GCD), ragone plot 등을 통해 분석하였다. 이를 통해 기존에 수계 전해질로 PVA 단일 고분자만 사용하던 분야에 그래프팅 방법이라는 새로운 접근법을 제시하였다.

Cryopreservation of bovine embryos is used to efficiently implant surrogate mothers. It has been widely accepted that high lipid content in the oocyte interrupts its survival during freeze-thaw cycles. Serum component in the culture medium is thought to increase the embryo`s lipid contents. Conversely, L-carnitine stimulates lipid metabolism by transporting long chain fatty acids into the mitochondria. Objective of this study was to analyze the effect of L-carnitine supplementation in IVM medium and defined IVC medium on the development, lipid contents and the cryosurvival of bovine IVF embryos. 0.0, 1.5, 3.0 and 6.0 mM L-carnitine was supplemented in IVM medium, respectively (IVM-LC 0.0, LC 1.5, LC 3.0 and LC 6.0). Development rate from the 2cell to the morula stages was higher in IVM-LC 3.0 groups than those of IVM-LC 6.0 (p<0.05). But there were no significant differences among the other groups in the blastocyst rates and lipid content results. When 0.0, 1.5, 3.0 and 6.0 mM L-carnitine were supplemented in IVC medium (IVC-LC 0.0, LC 1.5, LC 3.0 and LC 6.0), development competence was not significantly different between those embryos. Lipid contents of embryos treated L-carnitine (IVC-LC 1.5, 3.0 and 6.0) were significantly lower than embryos of non-treated group. L-carnitine was supplemented 0.0, 1.5, 3.0, 6.0 mM during IVM and 3.0 mM during IVC (LC 0.0 - 3.0, LC 1.5 – 3.0, LC 3.0 – 3.0, LC 6.0 – 3.0) and cryosurvival of blastocysts confirmed after freezing-thawing. There were no significant differences on development, but LC 3.0 – 3.0 was significantly lower lipid contents than other groups. And LC 3.0 – 3.0 had better survival rates and hatched rates of blastocysts than LC 0.0 – 0.0. In conclusion, supplementation of L-carnitine in defined IVC medium decreases lipid contents. And L-carnitine supplementation improves cryosurvival and developmental ability of bovine IVF embryos.

The early-onset familial Alzheimer's disease (EOFAD/ FAD), the less common type of Alzheimer's disease (AD) currently affects a vast number of individuals worldwide. This type is being inherited as an autosomal dominant fashion. Missense mutations on Amyloid precursor protein (APP) and Presenilins 1 and 2 (PSEN1 & PSEN2) are known as major genetic factors in FAD. Conversely, missense mutations on microtubule-associated protein tau (MAPT) are also thought to involve. Up to date, several triple-transgenic animal models with muted forms of the human APP, PSENs and MAPT have been reported. Compared to other animals, canines are more emotional and their disease signs can be easily diagnosed. This attempt was to develop a triple transgenic canine model for the AD. We have obtained the coding sequences of APP, PSEN1 and MAPT from Dana-Farber/Harvard Cancer Center DNA resource core at HMS and incorporated several common AD mutations. The transgenic construct is composed of hNSE (ENO2) promoter-driven three AD genes fused together with modified 2A sequences. It was transfected into the canine fetal fibroblasts which were then used to perform somatic cell nuclear transfer (SCNT). The viable transgenic embryos were obtained after in vitro culture and the GFP was detected. In this study, we have successfully produced viable triple transgenic canine cloned embryos using SCNT technique. These transgenic canine embryos will be further developed into canines with FAD. The transgenic canines will be a good candidate in the AD research field.

In 2017, the freshwater algae were collected from reservoirs, small ponds, soil, and rocks in Korea. Eight taxa of Chlorophyta (Chlorophyceae and Trebouxiophyceae) have been newly reported in Korea. The unrecorded indigenous species were Chlorolobion braunii, Coelastrum pseudomicroporum, Coelastrum reticulatum var. cubanum, Monoraphidium nanum, Tetrachlorella incerta, Ecdysichlamys obliqua, Gloeotila scopulina, and Stichococcus jenerensis.