묘도-광양간 현수교는 광양항에 진입하는 항로에 위치해있으므로 큰 배들에 대하여 충돌 방지공이 필요하다. 본 논문은 선박충돌을 고려하여 위험도 분석과 비선형 수치해석을 실시하였다. 위험도 분석 결과 충돌 방지공 설치 이전에는 연간 파괴확률이 기준치인 0.0001을 초과하여 충돌 방지공이 필요한 것으로 분석되었다. 따라서, 선박의 충돌을 방지하기 위해서 인공섬과 콘리트트 블록으로 만든 방파제 벽을 사용하여 설계하였다. 계획된 충돌 방지공 설치 후 비선형 수치해석 결과 교량에 미치는 하중이 교량의 내하력 이내로 나타나 선박 충돌시에도 교량의 안정성이 확보되는 것으로 나타났다.

Ecological risk assessment(ERA), developed in Australia, can be used to estimate the risk of target, bycatch and protected species from the effects of fishing using limited data for stock assessment. In this study, we employed the ERA approach to estimate risks to tunas, billfishes, sharks, sea turtles and other species by the Korean tuna longline fishery in the Western and Central Pacific Ocean using productivity and susceptibility analyses of the ERA based on low(<1.30), medium(1.30-1.84) and high risk(>1.84). Albacore, bigeye, yellowfin, skipjack and bluefin tunas were generally evaluated in the medium risk. The susceptibility of tuna species, however, had higher risks than the productivity. Billfishes were also at medium risk, while sharks were at high risk by the tuna longline fishery. The risk of productivity was generally high, because most sharks caught by the tuna longline fishery have high longevities, i.e., over 10 years, including ovoviviparous species. Susceptibility, which is related with the selection of fishing gear, was also high, because the longline fishery has no gear modifications to prevent bycatch of protected species. Not only target tuna species were influenced by the tuna longline fishery in the Western and Central Pacific Ocean, but also nontarget species, such as pomfret, mackerels rays, sea turtle were done. Ecosystem-based fishery assessment tools, such as productivity and susceptibility analysis(PSA), have the ability to provide broad scientific advice to the policy makers and stakeholders.

The purpose of this study was to develop a checklist of risk factors for quantitative assessment of musculoskeletal complaints in shipbuilding workers. A key point was to develop comprehensive a checklist including the worker's physical ability, as ergonomic and workload factors. ln the first, through correlation analysis between musculoskeletal complaints and physical abilities in shipbuilding workers, risk factors related to physical abilities were selected. In the second, after the development of a checklist was composed of physical, ergonomic and workload factors, factor analysis was used to test the validity of the developed checklist. Each factors selected finally showed that physical factors were hand grip strength, spinal curvature, and flexibility (sit to reach), ergonomic factors were posture, total exposed time, duration, and force of working, and workload factors were physical and psychological workload perceived by worker. The results showed that musculoskeletal complaints was associated with physical abilities (p<.05). The developed checklist had a reliability of .761 (Cronbach=.761) and a validity and explanation of 54.9%. The criterion of management was classified in 4 stages by relative weights of each factor. It is suggested that active intervention is needed to reduce musculoskeletal complaints in workers with more than a 14.31 score.

In this study, with the objects of 173 institutions of university and research institutions, investigation was carried out through visit investigation ar d questionnaire investigation. Frequency and severity of occurrences was acquired mainly through universities and research institutions which have reported occurrences of accidents to the Ministry of Education, Science, and Technology. Quantitative danger evaluation was conducted through frequency and strength of occurrences. Case study was carried out by selecting bio science laboratory of university and as the result of this study, degree of danger among the inspection objects of bio science laboratories, laboratory work place was evaluated as the most dangerous with the scores of 155.00 and as the result of average danger level, compression gas cylinder was evaluated as the most dangerous with the scores of 6.4000.

In this study, with the objects of 173 institutions of university and research institutions, investigation was carried out through visit investigation and questionnaire investigation. Frequency and strength of occurrences was acquired mainly through universities and research institutions which have reported occurrences of accidents to the Ministry of Education, Science, and Technology. Quantitative danger evaluation was conducted through frequency and strength of occurrences. Case study was carried out by selecting bio science laboratory of university and as the result of this study, degree of danger among the inspection objects of bio science laboratories, laboratory work place was evaluated as the most dangerous with the scores of 155.00 and as the result of average danger level, compression gas cylinder was evaluated as the most dangerous with the scores of 6.4000.

This study aimed at evaluating current sanitation management performances in Korean-Food restaurants by their operation types and to develop sanitary training posters based on the risk factors, in an attempt to improve the level of sanitation management in Korean food service facilities. Eighteen Korean-food restaurants that are managed by franchisor, franchisees as well as self-managed with large-scale and small-scale restaurants in Seoul and Gyeonggi-Do, were evaluated by on-the-spot inspectors with an auditing tool consisting of three dimensions, nine categories and thirty four items. Data were analyzed using SPSS. The total score of each group showed that restaurants managed by franchisees ranked the highest (59 out of 100 points), while self-managed, small-scale restaurants ranked the lowest (44 out of 100 points). In the categorization of sanitation management compliance, the dimensions of food hygiene during production recorded the lowest compliance rate of 47.7% (22.89/48.0 points) followed by the dimension of environmental hygiene 59.3% (20.17/34.0 points) and personal hygiene 60.5% (10.89/18.0 points). This indicated the need for urgent improvement. The items which showed the lowest compliance rates were 'proper thawing of frozen foods' (0%), 'notifying and observing heating/reheating temperature' (6%), 'using of hand-washing facility and proper hand-washing' (33%), 'monitoring temperature of frozen-foods and cold-foods' (35%), and 'prevention of cross-contamination' (36%) among thirty four items. Self-managed, small-scale restaurants, in particular, needed to improve sanitary practices such as 'sanitation education for employee', 'verifying the employee health inspection reports', 'storing food on the shelves 15 cm distance away from the wall', 'suitability of ventilation capacity of hoods' and 'cleanliness of drainage'. On the basis of the findings of this study, we developed sanitary training posters, especially for small-scale restaurant operators. This could be an effective tool to educate food service employees on sanitary knowledge and principles and could be used to improve the existing sanitary conditions in Korean food service facilities.

본 연구는 북한산 국립공원을 대상으로 산사태 발생인자들에 대한 공간정보를 구축하였으며, 중첩분석 및 합산평가 매트릭스분석을 이용한산사태 취약성 지도 및 생태적 위험 지표 작성을 통해 향후산사태 재해 예방을 위한 기초자료를 제시하고자 하였다. 산사태 평가 인자로는 사면경사, 사면방향, 경사길이, 토양배수, 식생활력도(NDVI), 토지이용도가 선택되었으며, 공간데이터베이스는 30m×30m 해상도로 구축되었다. 분석결과, 우이동 및 도봉계곡 일대의 산사태 취약성이 높은 것으로 분석되었으며, 생태적 위험도는 도봉계곡, 용어천계곡 및 정릉계곡, 평창계곡 등이 높은 것으로 분석되어 향후 이들 지역의 관리계획 수립 시 산사태 위험에 대한 영향도 고려되어져야 할 것으로 판단된다.

This research modified the checklist used in the universities in USA, England and Korea considering the current situation of Korea, and conducted case studies upon each section of appointed chemical laboratories based on 4M criteria, which stands for Machine, Media, Man and Management. The purpose of the studies is to assess how dangerous the laboratories are and to contribute to prevention of accidentsin the laboratories as well as reducing loss of lives and property. The result of this research found out the harmful and hazardous factors based on the 4M-type checklist and predicted the dangerousness as it multiplies possible frequency by intensity. Protective equipment, safety facilities in laboratories, emergency exit and compressed gas cylinder are found to be more dangerous, so the result shows that it is desirable to improve ventilation, safety facilities and circumstances of the laboratory through the investment.

복잡한 구조물의 유한요소해석 응답값으로부터 계산된 요소신뢰성 지수와 파괴확률은 음함수의 미분 및 극히 작은 파괴확률의 계산상 1계2차 모멘트법 (FOSM)과 몬테카를로 시뮬레이션(Monte-Carlo Simulation)의 적용이 어려우므로, 선택된 확률변수만의 함수인 한계상태방정식을 음함수로 구성하는 응답면기법을 적용하여, 기본설계단계의 아치교량의 설계값으로 구성된 확률변수를 고려하여 교량시스템의 완성단계에 대한 위험성을 해석하였다. 체계신뢰성 해석에서는 모든 붕괴모드의 발생경로와 단면에 대한 해석에 많은 시간이 소요되어 유한요소 구조해석 결과와 기존의 아치교 사고사례 등을 통해서 밝혀진 중요한 위험경로 및 위험단면의 파괴를 일으키는 사건에 대하여만 고려하였다. 교량시스템의 체계신뢰성을 평가하여 상관관계의 변동에 따른 시스템붕괴에 대한 발생확률의 상하한계를 결정하였다. 시스템의 요소간 저항연결구조는 요소파괴의 순서와 전체강성의 감소정도에 따라서 결정하였다. 체계신뢰성에서 검토되지 않는 다른 요소간의 상관관계를 검토하기 위해서 가정된 붕괴순서와 다른 거동을 보일 경우에 대해서는 통계적으로 독립된 요소들의 파괴와 그 모든 붕괴모드 조합경우에 대해서 검토하였다. 붕괴모드조합의 검토 결과 거더와의 파괴조합과 아치리브와의 파괴조합에서 체계신뢰성보다 위험한 상한계 시스템 파괴확률과 안전한 하한계 파괴확률이 발견되었다.

본 연구는 LES를 이용해 건물군 주위의 풍환경을 수치적으로 해석하였다. 본 연구의 동기는 강풍 피해에 대한 위험도 평가 기술을 개발하려는 노력에 기인한다. Lagrangian dynamic subgrid-scale model이 난류 모델링으로서 사용되었으며 log-law에 기반을 둔 벽모델이 바닥면과 건물 표면에 적용되었다. 건물의 형상은 가상경계법을 이용해 구현되었으며 직교좌표계를 이용하였다. 위험도 평가에서 중요한 인자는 평균 물리량 뿐만 아니라 그 RMS 값이다. 몇몇 선택된 건물의 표면과 그 주위의 압력 및 속도, 난류 강도 등을 도시화하였으며, 특히 사람 높이에서의 그러한 물리량들의 평균과 RMS값을 도시함으로써 인간에 대한 직접적인 위험도를 예측하였다.

항공, , 원자력과 같이 안전성이 크게 요구되는 시스템에서는 사업운영자들에 대한 안전자격과 안전인증 제도에 의한 정기적 안전 확인이 매우 중요하나 , 일상적인 운영사고의 관리 뿐 아니라 저빈도 대형사고에 대한 기술적 연구과 관리가 지속적으로 이루어져야 한다. 본 논문은 위험성평가 결과를 기반으로 하여 안전경영 시스템을 운영하는 유럽국가들의 사례를 살펴보고 적용된 위험성평가 기술과 그 결과를 어떻게 경영관리에 활용하는지를 연구하였다. , 그리고 운영상 수영할 수 있는 적절한 위험수준에 대하여 사례를 통한 발표를 하려고 한다.

In risk assessment, there are several methods such as Safety Review, Checklist, FMEA(Failure Mode and Effect Analysis), FTA(Fault Tree Analysis), ETA (Event Tree Analysis) etc, however, the level of accident is indentified by the probability of accident and severity resulting from accident which used widely in assessing accidents and disasters. In this paper, the risk assessment method to decide the level of risk will be introduced by using severity, frequency and detection according to accident theory.

  In general, reliability of AHP(Analytic Hierarchy Process) depends on pairwise comparison of evaluators. In addition, human judgment on the importance of alternatives or criteria is always imprecise and vague. To cope with these shortcomings, Fuzzy AHP