STCW협약에 따른 기초안전(재)교육 및 상급안전(재)교육 등과 같은 선원 해상생존교육은 해상에서 비상상황이 발생할 경우 선 원들의 생존율을 증대시켜줄 수 있는 필수교육이다. 그리고 IMO 모델코스에 따른 선원안전교육을 효과적으로 수행하기 위해서는 선원들 이 다양한 안전장비에 대한 이론 및 실습교육이 병행되는 것이 매우 중요하다. 따라서 이 연구는 IMO 모델코스에서 요구하는 해상생존교 육과정에 근거한 실습시설을 파악하고, 국내외 교육기관의 운영 실례를 바탕으로 관련 시설을 비교·분석하여 선원 안전교육시설 개선방 안을 다음과 같이 마련하였다. 첫째, 해상탈출설비(슬라이드, 슈트 등) 등과 같은 최신화된 교육장비를 비치하여, 선원들이 다양한 안전장 비를 직접 체험할 수 있는 교육환경을 구축해야 한다. 둘째, 조파, 풍동, 강우, 암막장치 등과 같은 해상환경 재현시설의 설치하여 학습자 가 현실적인 비상상황을 직·간접적으로 체험해 볼 수 있는 교육환경의 구축해야 한다. 셋째, 체험교육, 시청각교육, 시뮬레이터 교육과 더 불어 가상현실 교육장비를 통한 층위별 맞춤교육을 개발하고 확대시킬 필요가 있다.

Abstract1It takes lots of time and labor if a worker have to measure the water quality at a certain but designated time every day in an un-automated aqua farm. In addition, if the equipment is soaked in the sea water consistently, it will be contaminated by diverse floating matters and barnacles, and it often becomes mal-functional within 2~3 months. Therefore, we need to develop a system with which the sensed data could be checked in real time and operated automatically, while preventing the contamination of the sensor, a crucial component for water quality measuring equipment, as much as possible, and increasing the replacement cycle. We have developed a non-cleaning water quality measuring equipment and its software which are used in the fishery household of offshore aqua farms. By providing the workers with a mobile application which has a function of monitoring the water quality in real time, they can check the situation directly without going to the fishery household.

BIM(building information modeling) has been actively applied to construction industries and to maximize its application through the life cycle of structure, various relevant technologies have been proposed. In particular, 4D sequencing management and 5D cost-related management were introduced as an improved version of the design review and interface control by 3D information design. On the other hand, the virtual construction using virtual construction equipment can sophisticatedly handle capacity, dynamic movement, collision boundaries of actual construction machines but it still stays at a low level in a technical sense. In this study, simulation systems based on BIM involving virtual construction equipment have been developed; then it is applied to the actual construction project to evaluate the safety and efficiency of construction equipments. It was confirmed that the simulation systems can be utilized to construct virtual construction site by using an effective 3D library of construction equipment and can plays a key role to secure construction safety and economic feasibility. Specifically, the simulation system are very useful for decision making by construction managers to select the optimum equipment and construction method with a better understanding for safety and cost-saving.

In this paper we developed the Teflon heater which contains a built in temperature sensor and a relay for improved plating equipment system. Teflon heater is improved by using Pt 100Ω sensor which can detect until 600°C. When the bath temperature sensor detects over 60°C or the Teflon heater sensor detects over 240°C they temporarily shut down the heater to control temperature. Also relay completely shuts down main power when detects instant temperature is detected over 5% of 240°C by the heater sensor to prevent teflon melting down and fire spreads. Developed plating equipment system can monitor a real time temperature in the teflon tube and bath water. Therefore we think the proposed plating equipment can eliminate the possibility of fire in plating processes fundamentally.

In order to secure competitiveness of companies in the semiconductor industry, state management of equipment is one of the most important key factors. Particularly, after carrying out preventive maintenance (PM) work to maintain the best equipment condition, process reliability inspection is carried out. This work must be performed manually by the intervention of the operator. This inspection work is becoming more and more difficult due to the difficulty of the manufacturing worker, the increase of the simple repetitive workload, and the increase of the inspection items for the engineer, as the condition and the procedure continuously change as the semiconductor scaling down. Therefore, we would like to carry out an empirical study on the construction of an automatic inspection system in order to carry out the more reliable and efficient inspection procedure by eliminating the problems and unreasonableness of the past based on the investigation and analysis of the work procedures and conditions of the existing manual method.

This study investigates application cases of facility management system model for enhancing facility productivity of industry filed around medium and small facility processing companies and finds the inefficiency of the existing management model. Following items are researched to seek out methods and measures to maximize facility productivity through empirical analysis by exploring and establishing a new management model. First, the empirical analysis, it is found that the overall equipment efficiency index used for facility productivity management in the companies has a difficulty being used as the index for it in actual medium-small processing companies. Second, a new facility management system model applying standard cycle time is suggested among facility management index system to measure facility productivity. Third, the empirical analysis is used to verify that developed facility management system model is a useful method to manage the facility productivity by applying the model to actual medium-small processing companies. Finally, it is necessary to implement comparison analysis on whether actual productivity enhancement induces a distinctly different result by using a new facility management index system model to be inhibited in this study.

Electric of using in daily life is always exposed to risk of electrical fire and electric shock. Only degree of risk is different, there is no risk free electrical product. Generally, the higher voltage, the risk of electric shock is high. The much electric current, the risk of electrical fire is high. But, we can’t help using electric because of risk and we effort to reduce the risk of electrical fire and electric shock. This study deal with the fire prevention generated on heating equipment using SSR for current

Wire rods having various sectional shape are generally used in various applications. In a 2-roll shape rolling process, step-by-step rolling operations are executed repeatedly and the rollers must be changed whenever the sectional shape of wire rod is changed. The frequent changes of the rollers and discontinuous repeated operations are cause various shortcomings such as increase of manufacturing cost and reduction in precision. We had developed a high precision automatic wire rod manufacturing system to reduce these shortcomings in the previous study. In this study, we evaluated the field application performance of the developed system in terms of straightness, thickness deviation, surface precision, tensile and hardness of the wire rod in order to verify the feasibility of the system.

This study optimized physicochemical factors for the sphericity of capsule type-fish roe analogs using equipment with double nozzles. The manufacturing process of fish roe analogs was optimized by response surface methodology with central composite design. For the optimum conditions of sphericity, sodium alginate concentration, calcium chloride concentration, agitation speed of calcium chloride solution in a reactor, and dropping height were investigated as independent variables. Soybean oil was put into the equipment through an internal nozzle, along with sodium alginate solution through an external nozzle into calcium chloride solution. The optimum conditions for the production of fish roe analogs were 1.66% (w/v) sodium alginate, 1.86% (w/v) calcium chloride, agitation speed of calcium chloride at 280 rpm, dropping height at 17 cm between the tip of the nozzle and the surface of calcium chloride solution. Consequently, the fish roe analogs showed a high sphericity of 99.8±0.77% at optimal conditions.

In this study, the recently developed Al 2013 alloy was T8-tempered and, to improve the strength and corrosionresistance, slight amounts of Zr of 0.2 wt% and 0.5 wt%, respectively, were added and the mechanical properties were analyzed. For microstructure and precipitate analysis, OM observation, XRD analysis, and TEM analysis were performed, and for the mechanical property analysis, hardness and tensile strength tests were done. Also, in order to determine the corrosion rate according to the Zr content, a potentiodynamic polarization test was performed and the properties were compared and analyzed. The size of the precipitate varied with the content of Zr and was finest at Zr content of 0.2 wt%; it grew larger at 0.5 wt%, at which point the hardness value accordingly showed the same trend. On the other hand, as calculated from the aspect of chemical bonding among atoms, it was confirmed that the tensile strength and the corrosion-resistance increased with the same trend.

In order to guarantee reliability of the environmental testing on defense systems, it is important to use test equipment that meets requirements of the related test standards. Especially with regard to the rain test method in MIL-STD-810G w/change 1, the latest standard, it has been highly needed to introduce a novel technique and system to provide droplet-size and precipitation-rate conditions. In this study, droplet-diameter spectra of various nozzles were measured by a high-speed camera. Then, a pair of nozzles were selected based on the experimental results showing the spectra lie within the range from 0.5 mm to 4.5 mm, as suggested in the rain test method. Also, the flow-precipitation rate calibration system was developed to precisely correlate the precipitation rate measured in the chamber and the flow rate into the nozzle bank. In conclusion, the rain test equipment has been successfully developed fulfilling the requirements of the test standard.

The purpose of this study was to produce a prototype after performing the design for the traditional flooring Hanji after coating. It performs the following test results were as follows. The prototype was commissioned to establish optimal coating conditions through. The production of high quality flooring can be produced after the year 192,000 sheets. Largely due to the coating operation to improve hand and contributed to improving the working environment.

Cooling towers have been widely applied to control the indoor temperature in the residential area and the living space. At operating the cooling towers, motor, fan and dropping water produce noise and vibration, which diffuse through the air or the solid object, polluting the environment. The standards can be used at estimating noise and vibration emission by showing remarkable economic or social benefits. The purpose of this study is to show the vibration and noise measurement and influence evaluation between cooling towers and semiconductor equipment.

The measuring equipment capable of thermo measuring of wide range thermo range(0℃ ~ 160 0℃) will be developed in a high temperature and high pressure state. The developed technology is a combination of one measuring two different temperatures measured in the measuring to a high temperature as possible at a low temperature from thermocouple module(thermocouple) to develop an integrated measuring device capable of measuring the broadband. Also, to develop two or more guard module to ensure the water-tightness and durability of the device to develop in a vacuum or high pressure is applied to the one-piece measuring device.

Wire rods having various sectional shape are generally used directly in various applications. In the shape rolling, a couple of grooved rollers are used and the groove match the sectional shape of the wire rod. In this 2 roll system, a couple of rollers must be changed whenever the sectional shape of the wire rod is changed, and the frequent changes of roller cause rise of manufacturing cost. In this study, in order to apply a highly precise 4 roll rolling mill developed in previous studies on the shape rolling manufacturing process, the raw wire feeding equipment, 2 roll rolling mill, turks Head rolling mill, large heat treatment equipment, a steam cleaning equipment, a large winding equipment, cooling equipment, a tension adjustment equipment, designed and manufactured to the main control system. In addition, the problems corrected throughout these various equipments for manufacturing high-precision automatic rolling mill system developed by assembling more than six months and was conducted between complementary and testing process.