잎새버섯 원목재배로서 비닐하우스 토양에 매립하여 재배한 결과 수확일은 다박 품종이 9월 13일에서9월 23일 사이로 잎새1호 품종에 비하여 15일 정도 빠르고 색택은 잎새1호가 더 진한 갈색이었다. 수량에서는 다박품종이 평방미터당 2012년 매립 시 11kg,2013년 매립 시 13.6kg이었으며, 잎새1호품종은 2012년 매립 시 15.3kg, 2013년 매립 시 16.6kg으로 잎새1호가 다소 높게 나타났다. 컨테이너상자내 토양에매립하여 원목재배한 결과 수확일은 비닐하우스에서토양에 매립하여 재배한 결과와 같이 다박품종이 잎새1호 품종에 비하여 5일 정도 수확이 빨랐으며 자실체의 색택 또한 잎새1호 품종이 더 진한 갈색으로나타났다. 수량특성에서는 다박품종과 잎새1호 품종모두 상자당 수량이 1.2~1.4kg 사이로 큰 차이가 없었다.

The purpose of this study is to examine effective ways to introduce creative thinking skills development in the English learning classroom, specifically, focusing on questioning techniques and creative thinking techniques. The study explores selected creative-thinking techniques which are in accordance with English teaching methods and goals in the Korean context. The techniques highlighted were deemed adequate for enhancing creative and analytical thinking skills of English language learners and include the following: Brainwriting, SCAMPER, Lotus Blossom Technique, Forced Relationships/Analogy, Wishful Thinking Technique, Six Thinking Hats, SWOT, PMI technique, Flat Stanley Project. The study attempts to outline examples of and procedures for implementing such techniques in English education. The study is intended to provide insights for both researchers and practitioners alike and shall thus contribute to the ongoing discussion of integrating creativity education with English learning and teaching.

In this paper, two kinds of advanced powder processing techniques Metal Injection Molding (MIM) and Direct Laser Forming (DLF) are introduced to fabricate complex shaped Ti alloy parts which are widely used for med- ical and aerospace applications. The MIM process is used to strengthen Ti-6Al-4V alloy compacts by addition of fine Mo, Fe or Cr powders. Enhanced tensile strength of 1030 MPa with 15.1% elongation was obtained by an addition of 4 mass%Cr because of the microstructural modification and also the solution strengthening in beta phase. However, their fatigue strength was lower compared to wrought materials, but was improved by HIP. Subsequently, the effect of feed- ing layer height (FLH) on the characteristics of the DLF compacts was investigated. In the case of 100 µm FLH, sur- face roughness was improved and nearly full density (99.8%) was obtained. Also, tensile strength of 1080 MPa was obtained, which is higher than the ASTM value.

Lamb waves are extensively used in plate-like structure inspection because of their guided nature. However, their dispersive properties often limit their use in flaw detection and other applications. Dispersion weakens and defocuses interrogating Lamb waves and makes it difficult to accurately interpret signals reflected from defects or boundaries. Time reversal (TR) processing can be applied to compensate for the effect of dispersive Lamb waves. Thus, the TR operation will enable the amplification of dispersive Lamb wave signals by signal compression in time. In this study, experiments are performed in order to examine the refocusing and recovering the initial input waveform in the long range propagation of dispersive Lamb waves in a plate. Two different time reversal processes (regular TR and reciprocal TR or inverse filtering) are tested and the experimental results are compared

This study explores a possibility to expend the scope of Traditional Korean-style House, or Hanok through including North Korea's Modern Korean-style building. As Korean traditional architecture is gaining more attention, we should think over how contemporary Hanok should be and establish the concept of Hanok for future generations to come. In order to do that, the traditional Hanok design techniques should be understood. Based on this, the appropriate Hanok Design and construction techniques for contemporary buildings could be found out. This study, therefore, aims at finding basic data of design techniques which can be applied to modern Hanok in South Korea and provi야ng clues for the future Hanok design through studying Korean-style modern buildings in North Korea.

21세기는 문화가 경쟁하는 민족개성의 시대로 나아가고 있다. 본 연구는 한옥의 부흥과 ‘현대한옥’ 실현을 위한 연구의 한 방법으로 북한의 현대한옥에 연구를 통해 한옥의 범위를 확장하고 현대한옥의 하나의 범위로 그 가능성을 모색하기 위한 연구이다. 이제 건축에서도 분명 새로운 한옥의 시대가 도래하였고 이 시대의 한옥이 어떠해야 하는지 생각해 봐야 하고 앞으로 우리의 후손에게 남겨줄 지금의 한옥을 정립하여야 한다. 그러기 위해서는 과거 우리의 한옥이 어떠했는지 알아야 함이 먼저 선행되어야 한다. 이를 바탕으로 한옥에 적합한 기법을 찾아내고 지금 우리가 사는 이 시대 이 장소에서 새롭게 적응시킬 수 있는 설계와 시공에 대한 연구가 필요하다 . 이러한 바탕에서 본 연구는 북한의 대형공공건물에 전통설계기법을 적용한 방법을 통해서 이 시대 대한민국에서도 실현 가능한 현대한옥의 기초 자료를 제공하고 북한에서 그간 연구하고 진행하고 있는 북한의 현대한옥을 조사 연구함으로 우리 현대 한옥의 나아갈 방향에 대한 단서를 제공한다.

The purpose of this study was to determine the reliability of distance measurements from the medial border of the scapula to the spinous process of the thoracic vertebrae when obtained using tape and photography measurements. The study included 20 healthy subjects (10 males, 10 females); for a total of 40 scapula measurements. The distance measurements made using tape or photography methods were conducted with the subject in a standing position. Repeated tape and photography measurements were conducted in two sessions on different days by two examiners to assess the inter-rater and intra-rater reliability of the two methods. The reliability of scapular distance measured using tape and photography methods was tested using intraclass correlation coefficients (ICC(3,1)) and the standard error of measurement (SEM). The inter-rater reliability of the tape measurement method was excellent (ICC=.77) and the intra-rater reliability was fair to good (ICC=.74). The inter-rater and intra-rater reliabilities of the photography measurement method were excellent (ICC=.76 and .76 respectively). Our results suggest that photography measurement is an objective and qualitative measurement tool for scapular distance measurements.

The efficiency of artificial insemination (AI) for horses remains unsatisfactory. It is mainly because each process of AI causes a detrimental effect on semen quality. To sustain quality of semen properly, several factors including libido of stallions and sperm damage during sperm processing and preservation should be considered. Stallions with decent libido produce a high ratio of sperm to seminal plasma in their ejaculates, which is the ideal semen composition for maintaining sperm quality. Thus, to maximize the fertility rate upon AI, stallions should be appropriately managed to enhance their libido. Seminal plasma should have a positive effect on horse fertility in the case of natural breeding, whereas the effects of seminal plasma on both sperm viability and quality in the context of AI remain controversial. Centrifugation of semen is performed during semen processing to remove seminal plasma and to isolate fine quality sperm from semen. However, the centrifugation process can also result in sperm loss and damage. To solve this problem, several different centrifugation techniques such as Cushion Fluid along with dual and single Androcoll-ETM were developed to minimize loss of sperm and to damage at the bottom of the pellet. Most recently, a new technique without centrifugation was developed with the purpose of separating sperm from semen. AI techniques have been advanced to deliver sperm to optimal region of female reproductive tract at perfect timing. Recombinant equine luteinizing hormone (reLH) and low dose insemination techniques have been developed to maximize both fertility rate and the efficiency of AI. Horse breeders should consider that the entire AI procedure should be optimized for each stallion due to variation in individual horses for a uniformed AI protocol.

This research paper introduces the application and implementation of medical decision metrics that classifies medical decision-making into four different metrics using statistical diagnostic tools, such as confusion matrix, normal distribution, Bayesian prediction and Receiver Operating Curve(ROC). In this study, the metrics are developed based on cross-section study, cohort study and case-control study done by systematic literature review and reformulated the structure of type I error, type II error, confidence level and power of detection. The study proposed implementation strategies for 10 quality improvement activities via 14 medical decision metrics which consider specificity and sensitivity in terms of α and β. Examples of ROC implication are depicted in this paper with a useful guidelines to implement a continuous quality improvement, not only in a variable acceptance sampling in Quality Control(QC) but also in a supplier grading score chart in Supplier Chain Management(SCM) quality. This research paper is the first to apply and implement medical decision-making tools as quality improvement activities. These proposed models will help quality practitioners to enhance the process and product quality level.

곤충병원세균(Bacillus thuringiensis: 비티)의 살충효과를 증가시킨 미생물살충제 “비티플러스”가 개발되었다. 그러나 수화제 형태의 비티플러스는 농가나 산업체에서 높은 단가로 선호하지 않고 있는 실정이다. 이에 본 연구는 액상 제형의 비티플러스를 개발하는 연구 목적을 두었다. 이러한 목적에 따라 먼저 비티플러스 제조에 포함되는 두 세균 배양액의 최적 혼합 비율을 결정하였다. 이 최적 혼합액은 10%의 에탄올을 보존제로 사용되었으며, 비티와 또 다른 곤충병원세균인 Xenorhabdus nematophila (Xn)의 배양액 비율이 5:4 (v/v)로 제조하게 했다. 또한 이 액상제형이 1,000 희석배수에서 효과를 보이기 위해 비티 배양액을 10 배 농축하여 최적 비율로 혼합하였다. 이렇게 해서 얻어진 액상 제형을 발육 후기 유충의 배추좀나방(Plutella xylostella)이 가해를 하는 배추밭에 처리하여 7일 후 약 77%의 방제 효과를 보였는데, 이 처리 효과는 현재 상용화되는 배추좀나방 적용 생물농약들과 비등한 효과를 나타내는 것으로 판명되었다. 저온 및 상온의 저장 분석에서 본 액상 제형은 최소한 한 달 동안 안정된 방제효과를 나타내는 것으로 분석되었다. 이 액상 제형의 안정된 방제 효과를 보장하여 주는 품질관리 기술을 개발하기 위해 제형 내비티 포자 밀도와 Xn 유래 유용물질의 농도를 판별하였다. 본 연구 분석은 최적의 방제 효과를 나타내기 위해서는 비티플러스 액상 제형에 비티 포자 밀도가 최소 5 × 1011 spores/mL 이고, Xn 세균 대사물질들 가운데 8 종 유효물질의 농도가 품질관리 판별 기준으로 제시되었다.

The carbon-offset mechanism based on forest management has been recognized as a meaningful tool to sequestrate carbons already existing in the atmosphere. Thus, with an emphasis on the forest-originated carbon-offset mechanism, the accurate measurement of the carbon stock in forests has become important, as carbon credits should be issued proportionally with forest carbon stocks. Various remote sensing techniques have already been developed for measuring forest carbon stocks. Yet, despite the efficiency of remote sensing techniques, the final accuracy of their carbon stock estimations is disputable. Therefore, minimizing the uncertainty embedded in the application of remote sensing techniques is important to prevent questions over the carbon stock evaluation for issuing carbon credits. Accordingly, this study reviews the overall procedures of carbon stock evaluation-related remote sensing techniques and identifies the problematic technical issues when measuring the carbon stock. The procedures are sub-divided into four stages: the characteristics of the remote sensing sensor, data preparation, data analysis, and evaluation. Depending on the choice of technique, there are many disputable issues in each stage, resulting in quite different results for the final carbon stock evaluation. Thus, the establishment of detailed standards for each stageis urgently needed. From a policy-making perspective, the top priority should be given to establishinga standard sampling technique and enhancing the statistical analysis tools.

The purpose of this study is to develop preliminary learning program of UCC making techniques for assistance of project based international students exchange program. This study drew design principles based on examination from the experts and the experts from the field which resulted in development of Tam & Edy advance learning program for AEEP with the assistance of application enterprise. Multinational students will be able to receive help through Tam & Edy learning in terms of international exchange of AEEP learning activities.

There are several “game testing techniques” to find bugs in game software. But they can not support game developer to correct errors easily and effectively in game development process. And also they are doing process according to game developer’s scenario and intuition at game company in these days. Therefore, to solve the above problem in this paper, this dissertation suggests a efficient testing techniques to judge the suitable generation of the auto-generate game map according to the game user’s playing and verify them TFD (Test Flow Diagram).

땅갈이는 농사의 태동기부터 터득되고 실천되는 최초의 농작업 이었다. 동양의 고전들에서도 가장 중요하고 필연적인 농사 기술로 취급되어 왔다. 땅과 하늘의 기운을 소통시키는 성스런 농삿일이기도 하였다. 그러나 땅갈이는 수많은 노동력을 요하는 과정이면서도 그 효과는 방법과 시기, 또는 작물이나 토양에 따라 천차만별로 다르게 나타나는 것이었다. 우리나라의 고대 농서들에 의하면 밭갈이의 실제를 효과에 따라 가급적 가볍게 하려는 쪽으로 검토 · 발전되었다. 그 일환으로 콩과 같은 작물을 밭갈이를 가볍게 하거나 앞 작물의 그루터기에 의존하는 정도로 하고 무경운에 가깝도록 하여도 좋다는 결론에 이르렀다. 이에 더하여 밭갈이는 기존의 잡초를 갈아엎고 파종을 하기 위한 작업 이상의 의미가 없음이 밝혀지게되었다. 또한 제초는 제초제로 쉽게 해결할 수 있는 기술이확립되면서 옥수수나 콩과 같은 작물의 경우, 최소경운이나 무경운 재배법이 체계화되기에 이르게 되었다. 이와 같은 논리는 필자의 무경운재배에 관한 시험연구로도 확증이 되었다. 고대의 밭갈이 농사기술은 이런 경과를 거쳐서 노력의 최소화가능성을 획득하기에 이르렀다.

본 논문에서는 단일 센서와 공간집속 신호처리 기술로 시간 역전과 인버스 필터링을 이용하여 이방성 평판에 서 충격 위치를 결정할 수 있는 탐상법을 다루었다. 유한 평면에서 굽힘 파의 운동 방정식을 유도하여, 그 식을 통해 얻어진 데이터를 기반으로 해석적인 시뮬레이션을 통해 시간 역전과 인버스 필터링의 시간 집속 효과를 확 인하고 충격 위치와 그 주변에서 신호의 공간 집속 효과를 관찰하고 충격 위치 결정에 영향을 미칠 수 있는 인자 들(총 수신시간, 샘플링 주파수)에 대해 살펴보았다. 그리고 충격원의 위치에 따른 2차원 결과를 제시하고, 실제 충격 위치를 정확하게 결정할 수 있음을 확인하였다. 여기서 제안한 방법은 기존의 충격 위치 결정법에 비해 많은 장점을 갖고 있다. 첫 번째로 단일 센서를 사용하는 것과 시험체의 형상과 물성을 몰라도 된다는 점이다. 또한 판 에서와 같이 분산성에 의한 다중모드 파동이 발생하는 경우에도 특정 모드나 주파수에 의존할 필요가 없다.

본 논문에서는 단일 센서와 공간집속 신호처리 기술로 시간 역전과 인버스 필터링을 이용하여 등방성 평판에 서 충격 위치를 결정할 수 있는 탐상법을 다루었다. 유한 평면에서 굽힘 파의 운동 방정식을 유도하여, 그 식을 통해 얻어진 데이터를 기반으로 해석적인 시뮬레이션을 통해 시간 역전과 인버스 필터링의 시간 집속 효과를 확 인하고 충격 위치와 그 주변에서 신호의 공간 집속 효과를 관찰하고 충격 위치 결정에 영향을 미칠 수 있는 인자 들(총 수신시간, 샘플링 주파수)에 대해 살펴보았다. 그리고 충격원의 위치에 따른 2차원 결과를 제시하고, 실제 충격 위치를 정확하게 결정할 수 있음을 확인하였다. 여기서 제안한 방법은 기존의 충격 위치 결정법에 비해 많 은 장점을 갖고 있다. 첫 번째로 단일 센서를 사용하는 것과 시험체의 형상과 물성을 몰라도 된다는 점이다. 또한 판 에서와 같이 분산성에 의한 다중모드 파동이 발생하는 경우에도 특정 모드나 주파수에 의존할 필요가 없다.

This study was performed to compare the muscle activity of lumbar stabilizers between stoop and semi-squat lifting techniques at different lifting loads. Twenty healthy subjects (9 males, 11 females) were recruited for this study. Muscle activity of external obliques (EO), internal obliques (IO) and lumbar multifidus (LM) muscle was measured by surface electromyography during stoop and semi-squat lifting at different lifting loads (10%, 20%, and 30% of the subject's body weight). A one-way repeated measure ANOVA was applied. The results showed that EMG activity of EO was significantly increased with a load of 30% of body weight compared to 10% and 20% of body weight in both lifting techniques (p<.05). Muscle activity of LM was significantly increased in 20% compared to 10% and 30% compared to 10% of subject's body weight in stoop lifting and the muscle activity of LM was significantly increased in 20% compared to 10%, 30% compared to 20%, and 30% compared to 10% of the subject's body weight in semi-squat lifting (p<.05). However, there was no significant difference in activity of IO according to lifting loads in both lifting techniques. There were no significant differences in muscle activity of EO, IO, and LM between stoop and semi-squat technique (p>.05). Therefore, the results of this study suggested that the EO can contribute to increase the lumbar stability during stoop and semi-squat lifting at 30% of body weight rather than at lower loads, and the LM seems to act as counteractor to imposed loads during stoop and semi-squat lifting with increasing loads.

Hematopoietic stem cells (HSCs) are the self‐renewing, multipotent progenitors that give rise to all types of mature blood cells. The hallmark properties of HSCs are the ability to balance self‐renewal versus differentiation cell fate decisions to provide sufficient primitive cells to sustain haematopoiesis, while generating more mature cells with specialized capacities. In the present experiment, we optimized the techniques for isolation and identification of hematopoietic stem cells from cow peripheral blood. The objective of this study was to optimize the more accurate methodology for separation of mononuclear cells (MNCs) from peripheral blood and identification of HSCs by using a specific cell surface marker i.e. CD34. A total 10 peripheral blood samples were collected from Holstein dairy cows from jugular vein. We used Ficoll 400 in different concentrations from 1 to 12% and Ficollpaque Plus (1.077 g/ml) at different centrifugation speed and time. After Giemsa staining, we found more than 98% recovery of monocytes with Ficollpaque Plus (1.077 g/ml). It was demonstrated that Ficollpaque Plus (1.077 g/ml) and centrifugation at 400xg for 30 min is the best method for separation of MNCs from bovine peripheral blood. Separated MNCs were immediately subjected for magnetic activated cell sorting (MACS) by using CD34 microbead kit. HSCs (CD34+ cells) recovery was 0.307% of peripheral blood. Peripheral blood MNCs and CD34+ cells were morphologically characterized by Giemsa staining. CD34+ cells were also confirmed by immunochemistry using FITC conjugated CD34 antibodies. HSCs were also confirmed by progenitor assay including burst forming unit‐erythroid (BFU‐E), colony forming cells‐ granulocyte (CFC‐G), colony forming cells‐ macrophage (CFC‐M), colony forming cells‐ granulocyte macrophage (CFU‐GM) and colony forming cells‐ granulocyte erythroid macrophage monocyte (CFCGEMM) on Methocult 4435.