목적: 본 연구의 목적은 저소득층 아동⋅청소년의 신체활동 장애요인을 탐색하여 신체활동을 촉진할 수 있는 전략을 모색하는 것이다. 방법: 신체활동 장애요인의 정보를 얻어 나타난 주제에 대한 제언을 하기 위해 변형근거 이론이 활용되었다. 58명의 아동⋅청소년을 대상으로 개별 반구조화면담, 집단 초점 면담, 현장노트를 통해 자료를 수집하였으며, 전사된 자료는 항시 비교 방법을 통해 범주화되었고, 이 자료는 요인끼리의 상호관련성이 검토되고 3 가지의 주제로 조직되었으며, 이는 다시 본 연구 자료의 개념적 틀로 형성되었다 본 연구자와 세 명의 연구보조자들이 일련의 회의를 통해 나타난 개념적 틀을 고찰, 토의하는 과정을 통해 확정되었다. 문헌연구와 두 명의 외부전문가의 피드백을 통해 본 연구의 외재적 타당성이 향상되었다. 결과: 본 연구의 결과는 세 가지의 주제에 따라 논의되었다. 이들 주제는 선행요인, 동기 유발요인, 제언이었다. 선행 요인은 신체활동에 대한 개인 내적, 외재적 장애요소였다. 동기유발 요인은 신체활동에 참여하고자 하는 개인의 욕구를 활성화시킬 수 있는 요소들이다. 제언 요소는 신체활동을 증진하기 위해 참여자가 규명할 수 있는 아이디어들이다. 결론: 본 연구는 신체활동을 촉진할 수 있는 중재전략을 세우기 위해 필요한 종합적 접근방법을 강조하고 있다. 신체활동을 위한 제언은 보다 건강한 생활양식을 활성화시켜 신체활동을 증가시키는 것이다.

This study examined the effects of the embedded auxetic grating structures by design on numerical analysis. Compressive tests were performed and the results showed the effectiveness of auxetic grating structures for the enhancements of stiffness.

A new prediction scheme has been proposed for the robust teleoperation in a non-visible environment. The positioning error caused by the time delay in the non-visible environment has been compensated for by the Smith predictor and the sensory data have been estimated by the Grey model. The Smith predictor is effective for the compensation of the positioning error caused by the time delay with a precise system model. Therefore the dynamic model of a mobile robot has been used in this research. To minimize the unstable and erroneous states caused by the time delay, the estimated sensor data have been sent to the operator. Through simulations, the possibility of compensating the errors caused by the time delay has been verified using the Smith predictor. Also the estimation reliability of the measurement data has been demonstrated. Robust teleoperations in a non-visible environment have been performed with a mobile robot to avoid the obstacles effective to go to the target position by the proposed prediction scheme which combines the Smith predictor and the Grey model. Even though the human operator is involved in the teleoperation loop, the compensation effects have been clearly demonstrated.

본 연구에서는 반구형과 평탄형의 비상체를 이용하여 일반콘크리트와 섬유보강콘크리트에 충격시험을 진행한 후 파괴깊이와 형 태, 파괴직경, 배면의 인장변형을 평가하였다. 선단면적이 작을수록 충격력의 집중에 의해 파괴깊이는 크고 표면파괴 직경은 작게 되는 것으로 확인되었다. 반면에 선단면적이 클수록 파괴깊이는 작지만 표면파괴직경은 크게 되었다. 일반콘크리트와 섬유보강 콘크리트에서 유사한 표 면파괴와 배면변형이 발생하였으나 인장변형의 크기는 일반콘크리트에 비해 섬유보강 콘크리트가 작은 것으로 나타났다. 또한, 비상체의 선 단형상에 따른 표면관입의 형태와 배면의 인장변형 사이에 직접적인 연관이 있는 것으로 사료된다. 따라서 콘크리트의 배면박리한계두께 예 측 시에는 표면관입깊이뿐만 아니라 배면의 변형거동 또한 고려할 필요성이 있을 것으로 사료된다.

Background : Ginseng rain cover farming is expanding around Jinan county and Jangsu country of North Jeolla Province. Some farmers doing ginseng rain cover farming have suffered from difficulties due to hot weather damages. However, it is a situation that the study on mitigation techniques for high temperature damage do not exist with ginseng rain cover farming. Methods and Results : The test covering work was firstly done on April 28th for heat block film+90% black light blocking net, blue double sided film, and PE film+75% black light blocking net and when it comes to second treatment, 30% and 40% shading were implemented for heat block film group and blue double sided film group respectively and 75% black light blocking net was installed on PE film+75% shading group. When it comes to micro-climate measurement in rain cover facility, temperature, humidity and light intensity were measured during the growing period of ginseng. The results are as follows. Regarding the light transmittance (per PAR, 10 am in clear day) in facility with 1st covering, light block film covered group (LBF), blue double sided film group (BDF) and PE film group have 12.9±1.8%, has 11.6±1.0% and 27.1±1.1% respectively and after 2nd covering, in LBF groups, 30% blocking, 40% blcoking and no blocking have 10.6±1.3%, 8.2±0.9% and 12.9±1.8% and in BDF groups, 30% blocking, 40% blcoking and no blocking have 9.4±0.8%, 7.9±0.7% and 11.6±1.0 respectively and PE film group has 10.6±0.7%. Relative humidity also showed the same trend as temperature. The average monthly amount of light and maximum light intensity were lower in 30% and 40% light blocking groups of LBF and BDF and a little higher in no light blocking group compared to PE film group. The degree of high temperature damage was 1 in no LBF of BDF, but no LBF of LBF was so bad like 3. However, there was no high temperature damage in the test groups of blocking films or BDF with 30% and 40% light blocked light screens. Regarding root weight, all secondly treated groups of LBF group and BDF group were lighter compared to 4.36g of PE film group and especially, prism sheetof no light blocking group has 2.5g and BDF of of no light blocking group has 3.21g. 30 % and 40% light blocking groups of LBF group and BDF group were light with 3.20~4.07g. Conclusion : Regarding the analysis result on micro-climate in facility with different cover materials for 2 years old ginseng in ginseng rain cover farming of Gyeonggi Province, the covering method suitable for high temperature damage mitigation in ginseng rain cover farming was that 1st covering was done by PE film+75% black light blocking net and then 75% black light blocking net is additionally covered at a time when outside temperatures reaches 30℃.

Background : The area of ginseng cultivation has nearly exhausted in the main ginseng growing area in Korea but virgin fields need for ginseng cultivation due to continuous cropping injury. To count for the decrease of the virgin fields of ginseng cultivation, technical improvement to increase, or maintain the amount of harvest are necessary in ginseng cultivation. The Ginseng Rain-sheltered Shade House is one of the efficient cultivation techniques as reducing the damages caused by natural disaster such as blight, high temperature & humidity, dry, and heavy rain & snow. However a soil description needs to be developed to reduce the period of re-cultivation because ginseng has to be cultivated at the only one ginseng rain-sheltered house without soil or cultivation change. Methods and Results : This study was carried out in the ginseng rain-sheltered house where ginseng had cultivated and harvested one time. Each section of Cultivation of sudan grass+flooding, rice straw+flooding, and flooding was covered with vinyl and then, all areas were solarized through the summer season. The soil temperature was inspected at 5cm, 10cm, 15cm, and 20cm below ground. As a result, the soil temperature of the place with vinyl covered and solarized was approached to 40℃ regularly during the period of high temperature in July and August. After the solarization, the inspection result of Cylindrocarpon destructans spore density checked by Real time PCR was that C. destructans spores were not found at the place where sudan glass+flooding and rice straw+flooding were used. However, the detected number of C. destructans spores in the inspection condition was roughly 9 at the soil samples from the fields which were flooded and solarized, and 33 at those from the repeatedly cultivated fields. The evaluations of aerial part growth by measurements were good in the following order: Sudan grass+flooding, rice straw+flooding, and flooding. Conclusion : The purpose of this study was to reduce the period of ginseng re-cultivation in a ginseng rain-sheltered shade house. The incidence rate of the pathogens distantly decreased by the treatments of sudan glass + flooding, rice straw+flooding, and solarization.

Background : Recently, some of the previous stuies reported that was useful technique on growth and yield of organically grown ginseng transplantation in a rain shelter greenhouse. This study was conducted to investigate the optimum method of greenhouse shading for ginseng(Panax ginseng C. A. Meyer) cultivaton in the northern area of Ganwon, Korea. Methods and Results : We carried out to select optimal shade materials and light-penetrated ratio among polyethylene film with two-layered polyethylene net(PEF+PEN) and blue-white duplicated PE film(BWD-PEF) in the condition of greenhouse for ginseng cultivation. The order of light-penentrated ratio by shade meterials was PEN(75%)+PEF 〉 PEN(85%)+PEF 〉BWD-PEF(85%) 〉BWD-PEF(90%) and the order of air temperature was BWD-PEF(85%) 〉BWD-PEF(90%) 〉PEN+PEF(85%) 〉PEN+PEF(75%). The net photosynthetic rate was higher in PEN(75%)+PEF than other shading material treatments during growth season including summer high-temperature period. The root weight and yield were increased by 31.2~55.0% and 25.6~52.2%, respectively under PEN+PEF(75%) compared to other shading materials. Conclusion : We concluded that the PEN+PEF(75%) could be a good shading meterails of the greenhouse for organic 4-year-old ginseng cultivation in northern area of Gangwon, Korea.

Background : The production of healthy ginseng seedling is a critical part of growing 5-6-year-old fresh ginseng. Recently, for the problem of replant failure, it becomes more and more difficult to find first planted field for ginseng seedling cultivation. In this situation, This study was conducted to examine the possibility of seedling production practices of ginseng by utilizing the multi-beds cultivation system as a way to produce ginseng seedling stably. Methods and Results : This experiment was conducted by installing a 3-layed cultivation beds using 50㎜ sandwich panels. As the 1st and 2nd beds get insufficient amount of light, fluorescent lights were installed in 2 rows to further lighten up. And the 3rd bed used natural light. The bed soil used was formulated by mixing saprolite, yakto and peat moss. The control was cultivated under natural light on 1-layed bed with commercial bed soil for ginseng seedling. The commercial bed soil had pH 7.24, higher than the standard of permission, 6.5; and its calcium and sodium contents were 10.7, and 0.85 cmol+/㎏, respectively, higher than the standard. The available phosphate concentration was 34.0㎎/㎏, lower than the appropriate level of 100 ㎎/㎏. The mixing bed soil also had pH 7.69, higher than the standard but its nitrate and phosphate were within the appropriate range. The intra-facility light quantities of the 1st and 2nd beds were constant at around 100 μmol during days. But the light quantity of the 3rd bed was 51.4 μmol in average daily value. The roots of the 1st-3rd beds were found to weigh 0.58 – 0.73 g while those of the control group, about 0.47g to show heavier root weight of the multi-beds cultivation ginseng than that of the control. As for the yield, the control showed 145 ㎏/10a whereas the 1st-3rd beds showed higher levels between 183 – 228 ㎏/10a. Conclusion : In the multi-beds cultivation of ginseng seedling, fluorescent lamps seem to have provided sufficient light as an artificial light source. The soil for ginseng seedling production is different from ginseng cultivation field soil, additional study will be also necessary to set up the physiochemical range of bed soil for ginseng seedling.

The minimum reinforced in RC flexural members is prescribed to avoid sudden and brittle in overload. The minimum reinforced depends on the geometrical and materials parameter of RC members. In this paper ,the influence of the geometrical and materials parameter on the minimum reinforcing steel beam has been investigated.

Growth of 6-year old ‘Niitaka’ pear (Pyrus pyrifolia Nakai) trees and control of insect and disease occurrences were compared between fermented soybean extracts and rain-shelter system for two years. Foliar application of fermented soybean extracts was applied at 6 times as a pre-experiment in the open-field in 2013, with a rain-shelter system in 2014. Fermented soybean extract treatment increased foliar concentrations of approximately 0.46% T-N, 0.17% K, 0.19% Ca, and 0.06% Mg in 2013 compared to the control, with similar macro-nutrients between the control and soybean extract treatment observed in 2014. Rain-shelter system increased foliar concentrations of T-N, Ca, and Mg compared to the open-field. There were no significantly different between the control and soybean extract treatment for number of leaves per fruit, leaf dry weight, phytotoxicity, and completed shoot growth on August during the two years. Rain-shelter system increased leaf dry weight and did not affect phytotoxicity in the leaves. Fruit quality parameters were mostly similar to control and soybean extract treatment for two years, with higher fruit firmness observed for soybean extract treatment. Rain-shelter system advanced 4 days of harvest dates, and increased approximately 7.0 ton fruit yield per ha, 20 g mean fruit weight, and fruit soluble solid contents compared to open-field in 2014. Soybean extract treatment little suppressed occurrence of disease and insect on the leaves and fruits in both years. Rain-shelter system increased occurrence of Venturia nashicola on the leaves and to 63.8% of Gymnosporangium asiaticum on the fruits in 2014. Strong winds and storms in May elevated relative humidity in the rain-shelter system and caused high infection of the disease occurrence, requiring for an additional green control method. Soybean extract treatment little affected tree growth and would have initiated for a long-term study to evaluate tree physiological characteristics. Rain-shelter system improved fruit productivity and advanced harvest dates, which could have been more effective facility at a Thanks Giving Day between middle and end of September.

Background : Acreage of rain-shelter plastic greenhouse to prevent anthrax is being gradually increased according to growing importance of safe Boxthorn production. But When Boxthorn is grown in the hot season in rain-shelter plastic greenhouse, quantity of Boxthorn decreases. therefore the research was carried out to investigate Fertilization mode. Methods and Results : Chungwoon was very strong self-incompatibility. Chengyangjaerae, Chengyang18 and CBP11542-206 was self-compatibility. Artificial fertilization rate was slightly higher in roof and side vents than in side vents of rain-shelter plastic greenhouse in hot season. Pollen sterility due to high temperature is not critical because artificial fertilization rate was high in side vents of rain-shelter plastic greenhouse in hot season. Airborne fertilization rate was significantly lower in all varieties. Open fertilization rate was higher in roof and side vents than in side vents of rain-shelter plastic greenhouse Conclusion : Roof and side vents was good in compared to side vents in rain-shelter plastic greenhouse of Boxthorn because of high Airborne and open fertilization rate. Self-compatibility varieties were better than self-incompatibility varieties in rain- shelter plastic greenhouse because of high open fertilization rate.

Background: The purpose of this study was to evaluate methods to reduce seeding expenses, thereby increasing farm income. This study investigated the effects of rain shelter controlled cultivation and adapted seeding times on the stable seed production of Scutellaria baicalensis Georgi. Methods and Results: Seed germination was conducted under 10 condition compose to control, water washing, cold storage at 4℃ for 15 days, seed sterilization with a benomyl pesticides, hormone treated seed by submerging in 100 ppm GA3 with the cold storage at 20℃ and 25℃, darkness in a covered petridish and illuminated with a 1,500 Lux lamp. There were three cultivation type, open cultivation with non-woven fabric mulching, cultivation with a vinyl covering and rain sheltered in a plastic greenhouse. Sowing dates were April 27, May 18, June 7 and June 28, 2013. Plants were spaced 10 ㎝ apart in rows 30 ㎝ apart. Mixed oil cake fertilizer, N-P2O5-K2O (12-10-10) was applied at 600 ㎏• 10 a−1. Conclusions: Optimum germination occured in darkness at 25℃ and cold storage after submerging in GA3. The highest seed yields (4.5 ㎏• 10 a−1) occurred in the plastic greenhouse for the April 25 sowing. The highest root yield (17%) was found on April 1, under greenhouse conditions.

In this study, rear strain behavior of concrete panel considering the projectile nose shape was evaluated. It was considered that penetration and scabbing properties are different by each projectile nose shape. so it should be taken into account the rear strain behavior by projectile nose shape, when predicting scabbing, perforation of concrete by projectile impact.

This paper considers a homogeneous multiple regression (HMR) model and a non-homogeneous multiple regression model, that is, ensemble model output statistics (EMOS), which are easy to implement postprocessing techniques to calibrate probabilistic forecasts that take the form of Gaussian probability density functions for continuous weather variables. The HMR and EMOS predictive means are biascorrected weighted averages of the ensemble member forecasts and the EMOS predictive variance is a linear function of the ensemble variance. We also consider the alternative implementations of HMR and EMOS which constrains the coefficients to be non-negative and we call these techniques as HMR+ and EMOS+, respectively. These techniques are applied to the forecasts of surface temperature over Pyeongchang area using 24-member Ensemble Prediction System for Global (EPSG). The performances are evaluated by rank histogram, residual quantile-quantile plot, means absolute error, root mean square error and continuous ranked probability score (CRPS). The results showed that HMR+ and EMOS+ models perform better than the raw ensemble mean, HMR and EMOS models. In the comparison of HMR+ and EMOS+ models, HMR+ performs slightly better than EMOS+ model in terms of CRPS, however they had a very similar CRPS and if there exists a ensemble spread-skill relationship, it is seen that EMOS is slightly better calibrated than the homogeneous multiple regression model.

종래 브레이스시스템은 횡력저항 및 층변위제어에 효율적이며 골조물량 감소에 따른 경제성이 향상되어 일반적인 강구조 횡력저 항시스템으로 적용되고 있다. 그러나 압축측에서 항복응력에 도달하기 전 가새의 좌굴이 발생하여 충분한 내력을 발휘하지 못하고, 내력열화 형의 이력거동으로 불안정상태가 된다. 좌굴에 의한 내력저하 개선시스템으로 중심재를 구속하여 좌굴방지가 가능한 비좌굴가새는 심재의 항 복 이후에도 안정적인 이력특성을 나타내어 종래 브레이스에 비하여 에너지흡수능력이 우수하다. 최근 10년간 미국, 일본 및 대만에서 매우 다 양한 형상의 비좌굴가새가 제안되었으나, 기존의 실험연구에서는 그 형상이 매우 제한적인 경향을 보이고 있다. 본 연구에서는 조립형 Precast RC 보강재를 가지는 비좌굴가새를 제작하고 이력특성을 평가하기 위한 부재실험을 수행하였다. 또한 실험결과를 AISC(2005)의 요구조항과 비교하였다.

When the concrete is subjected to impact of the projectile, compressive stress wave is transmitted to the rear side. When the compressive stress wave reached the rear side, is was reflected as a tensile wave. And, when the tensile stress in the concrete matrix exceeded the dynamic tensile strength, crack in the concrete was occurred.

본 연구는 폴리비닐 알코올 섬유 및 강섬유를 체적비율로 1.5% 혼입한 고인성 섬유보강 시멘트복합체에 대한 비상체의 고속충돌시험을 실시하고, 충돌조건에 따른 파괴특성을 실험적으로 검토하는 것을 목적으로 하였다. 비상체의 충돌에 의한 고인성 섬유보강 시멘트복합체의 파괴특성을 평가하기 위하여 화약압력식 충격시험장치를 활용하였으며, 충돌속도의 범위는 약 150 ~ 1,000m/s로 설정하였다. 파괴특성에 대한 평가결과, 고인성 섬유보강 시멘트복합체는 섬유를 혼입하지 않은 Plain시험체의 약 3배 이상의 비상체 운동에너지가 작용하는 범위에서도 표면관입의 파괴등급으로 평가되었으며, 시험체가 파단되지 않는 내충격성능이 확인 되었다. 또한, 충돌시험 전후에 대한 시험체의 질량감소율의 경우, Plain시험체는 비상체의 운동에너지의 증가율과 비례적인 관계를 보였지만, 고인성 섬유보강 시멘트복합체는 비상체의 운동에너지의 영향을 크게 받지 않는 것으로 나타났다. 특히, 이와 같은 경향은 시험체 배면의 파괴특성과 밀접한 관계를 가지며, S시험체에 비해 PVA시험체의 배면박리 억제효율이 큰 것으로 평가되었다. 한편, 국부손상에 대한 표면관입깊이 및 배면박리깊이의 관계를 검토한 결과, 고인성 섬유보강 시멘트복합체는 Plain과 달리 시험체 단면의 중앙선을 기준으로 배면에 가까운 영역에서 배면박리가 발생하는 것을 알 수 있었다. 본 연구를 통해 비상체의 충돌에 대한 고인성 섬유보강 시멘트복합체의 주요 파괴거동이 검토되었으며, Plain과 비교하여 내충격성능의 향상을 명확히 확인하였다.

This study was conducted to determine the effects of high temperature and deficit irrigation on growth and yield of hot pepper. Hot pepper was subjected to four irrigation treatments: fully irrigation (FI), 10, 20, and 30 days deficit irrigation (DI) combination with high temperature treatment. Control plants were grown natural environment and conventional culture methods. The plant height treated with high temperature was significantly higher than that of control plant. At FI combination with high temperature treatment, growth parameters such as stem diameter, leaf area, fresh and dry weight were the greatest. The yield was the greatest (2,036 kg/10a) under control, DI combination with high temperature treatment decreased by approximately 42% compare with FI combination with high temperature treatment. The number of abnormal fruits was approximately 38/plant under control, which was the smallest and that of 30 days DI combination with high temperature was higher 3.3 times compare with control. Flower abscission and calcium deficiency induced by DI treatments, especially those physiological disorder promoted by increasing DI treatments period. Results indicated that yield of hot pepper reduced by DI treatments, these results suggest that the growers should irrigate to proper soil moisture for preventing reduction of total fruit yield.

Recently, demand for construction aggregates is increasing due to the growth of construction site scale. As natural aggregate sources are becoming depleted due to high demand in construction field, the utilization of recycled aggregate (RA) as coarse aggregate in concrete is becoming more important. In this study, the authors analyze the mechanical properties of normal- and high-strength concrete beams using RA and investigate the usefulness of the minimum steal ratio for RA reinforced concrete beams. The experimental results show that application of the minimum steel ratio to RA reinforced concrete beams is possible.