소입경 골재노출 콘크리트포장은 콘크리트 타설 직후 포장표면에 응결지연제를 살포하여 표면으로부터 2~3mm 정도의 모르타르 경화를 늦추게 한 후 표면의 모르타르 제거를 통해 굵은 골재를 포장표면에 노출시키는 공법이다. 소입경 골재노출 콘크리트포장의 타이어-노면 소음은 일반 콘크리트포장보다 작으면서도 적정한 미끄럼저항을 장기간 유지한다는 장점을 가지고 있다. 성공적인 소입경 골재노출 콘크리트포장의 건설을 위해서는 굵은골재의 최대입경이 적정하여야 하며 적정량의 굵은골재를 포장표면에 균일하게 노출하도록 해야 하기 때문에 이를 위한 적절한 배합과 노출기법의 도출이 요구된다. 본 연구에서는 소입경 골재노출 콘크리트포장의 시험시공을 실시하여 초기 공용성을 평가하였으며, 이를 통하여 적정 강도, 저소음 및 적정 미끄럼저항을 확보함을 확인하였다.
The aim of this study was to determine exposure assessment of pathogenic bacteria in edible ices by using the monitoring data from the previous study. According to the results of exposure assessment of edible ices contaminated with S. aureus, the contamination level of S. aureus in raw materials was higher than other foodborne pathogens, and the contamination level of S. aureus in mixed samples increased much before sterilization. The most significant reduction in contamination level was observed in mixed samples after sterilization, thus, the contamination levels in frozen final products was less than that of raw materials. Overall, the possibility for the infection of foodborne bacteria from the intake of edible ices per person per day was ranged from minimum 5.89 × 10-7 to maximum 5.01 × 10-5. For more realistic estimates, consumption of edible ices and dose-response model must be studied further.
The objective of this study was to evaluate Extremely Low Frequency Magnetic Fields (ELF-MFs) exposure level of housewives and the relation of residential environments with ELF-MFs exposure level in home. ELF-MFs measurements were performed for 58 housewives include 31 working women. Twenty-four hours personal MF exposure levels of housewives were slightly higher than working women as an arithmetic mean. However the median of 24 hours personal exposure levels for working women were significantly higher than housewives (p<0.05). The median of personal exposure levels due to the activity at home, working women were higher than housewives significantly (p<0.05). As a results of correlation of residential environments, such as their living environments, total income, type of water supply pipes, and distance from power line with ELF-MFs exposure level in home was different from the type of residence (p<0.05). This study could be informed as guidance for ELF-MFs exposure analysis in residential environment.
In this study, we attempted to estimate the association between asthma oriented by indoor air sources and personal exposure by comparing the case (asthma-patient) and control (non-asthma-patient) groups. We selected 27 participants who showed positive response on lung function and methacholin provocation test. We performed environmental survey with 15 and 10 cases during May and June 2007, respectively. There was no significant difference between the case and control groups in the level of formaldehyde and TBC (Total Bacterial Count). In the dust allergen test, the case concentration was higher than the control's, without signifiant difference. In the personal exposure assessment of VOCs using OVM (Organic Vapor Monitor) badge, the case concentrations of Benzene, Toluene, and Ethylbenzene were higher than the control's, but there was no significant difference. The personal exposure of Xylene case study was significantly higher than the control's
To investigate characterization of EMF(Electromagnetic Field) emission from VDT(Visual Display Terminal) in computer room, we were divided into 3 types of placement monitors which are 1) back side of monitor faced the ground(back view type), 2) arrangement of monitors was a line type(two sides type), and 3) disposition of monitors was s straight(horizontal line type). We also measured monitors classified types at the front, side and back by distance and evaluated by TCO(The Swedish Confederation of profession Employers) and MPR-2(Measure and Proof Radiation Board) guide line. Magnetic field emission level by the type of VDT, it was indicated that MF(Magnetic Field) level was below the backgrounds level when CRT moved away about 70~90cm, LCD moved away about 40~50cm. We evaluated MF emission level by the number of VDT, it did not show any relationship. Finally, estimated MF emission level by the placement of VDT, it was showed the MF level less than the background level, when VDT moved away 40~50cm in all dispositions with exception of 2 sites. Background level of case was higher than emitted from VDT, so that did not effect on MF level by distance. However, we find out that as distance increased, MF emission level decreased significantly in all cases. We measured MF emission level of one monitor and others (back and forth) monitor in line type. Below the background level when one monitor type moved away 70cm, others monitor type moved away 40cm. However, other monitor types affected MF level which is located back monitor. The data demonstrate that avoiding excessive MF exposure from VDT using computer room, to have a space between user and VDT at least 50㎝.
This study was to assess the health risk of VOCs in indoor air under uncontrolled Korean-IAQ regulation. We measured the concentrations of formaldehyde and 5 VOCs (benzene, toluene, ethylbenzene, xylene, and styrene) in indoor air at 232 public buildings for four kinds of public facility (32 wedding halls, 17 Gymnasiums, 20 Galleries, and 166 Welfare facilities) around the country. There were estimated the human exposure dose and health risk used average time and frequencies of questionaries for subjects such as facility users and office workers. There were estimated the lifetime excess cancer risk (ECR) for carcinogens (formaldehyde and benzene) and hazard quotient (HQ) for non-carcinogens (toluene, ethylbenzene, xylene and styrene). For the facility user, the average levels of ECRs were 10-4∼10-5 and 10-5 ∼10-6, respectively, for formaldehyde and benzene in all facilities. HQs of four non-carcinogens were not exceeded 1.0 in all facilities and subjects. In addition, there was showed the highest ECR in the smoking facility.
This study performed and re-analysed the articles of exposure assessment for the indoor environment of houses in many environment-related journals published. in Korea since 1990. Based on this comparative study, we estimated the unit health risk on indoor environment. The objective of this study was to offer scientific data for decision-making policy for improvement and management of indoor air quality on Korean house in. The pooled concentrations for the critical air pollutants in the house were 13.93±13.91㎍/m3 (PM10), 680±226 ppm for (CO2), 1.9±1.6 ppm (CO), 419±158 CFU/m3 (bacteria), 0.036 ± 0.002 ppm (NO2), and 104.935 ± 16.424 Bq/m3 (Rn), The pooled concentrations for the volatile organic compounds were 6.9±6.7㎍ /m3 (benzene), 39.3±55.1㎍/m3 (toluene), 4.2±4.0㎍/m3 (ethylbenzene), 11.4±8.3㎍/m3 (m, p-xylene), 4.2 ±1.5㎍/m3 (styrene) and 6.3±4.5㎍/m3 (o-xylene). The unit cancer risk for men and women by inhalation of benzene was 3.7 × 10-5 and 4.8 × 10-6, respectively. In additio
Indoor air quality tends to be the dominant contributor to personal exposure, because most people spend over 80% of their time indoors. In this study, indoor and outdoor NO2 concentrations were measured simultaneously with personal exposures of 30 university students in weekday and weekend in Daegu, Korea. House characteristics and subject's activity pattern were used to determine the effects on personal exposure. Since university students spent most of their times indoor, their NO2 exposure was associated with indoor NO2 level during both weekday and weekend in spite of different time activity. Using a time-weighted average model, NO2 exposures of university students were estimated by NO2 measurements in indoor home, indoor school, and outdoor home. In conclusion, major personal exposure to NO2 resulted from air quality of indoor environment at house.
PAHs 화합물은 유기탄소화합물의 불완전연소에 의해 주로 발생하는데, 일반인들은 대기오염에 의한 호흡노출과 가열조리식품의 경구섭취가 주요 인체노출경로로 알려지고 있다. 본 연구에서는 PAHs화합물에 오염된 식품이 식생활에 많은 부분을 차지하고 있어 우리나라 대표식품을 참고로 가정식과 외식의 식단을 작성하고 작성한 식단을 근거로 식품 중 PAHs화합물 오염도를 분석하여, 분석된 PAHs화합물의 오염도 자료를 활용한 가정식과 외식 1끼 식사를 기준으로 인체노출량을 비교하고, 성인 하루 가정식 2회, 외식 1회 섭취시의 1일인체노출량을 평가하였다. 다빈도·다소비식품에서 PAHs화합물 오염도를 분석한 결과 총 PAHs농도는 2.00~141.28 ug/kg의 범위로 검출되었으며, 멸치볶음이 가장 높게 나타났다. 상대독성계수(TEFs)를 활용하여 환산한 독성등가량은 0.03~l.31 ugTEQ_(BaP)/kg 범위였고, 가장 높은 값을 가진 식품은 햄버거이었다. 식품별 오염도와 노출변수들을 고려하여 산출한 끼니별 가정식과 외식에서의 PAHs 화합물 평균인체노출량은 각각 2.4×10^(-3) ugTEQ_(BaP)/kg/meal와 4.0x10^(-3) ugTEQ_(BaP)/kg/meal으로 외식이 가정식보다 PAHs화합물의 인체노출이 1.7배가 높은 수준으로 나타났다. 햄버거, 숯불쇠고기구이, 숯불삼겹살구이, 고등어구이 등은 PAHs화합물 오염도와 독성등가량 및 1회분식품섭취량이 모두 높아 PAHs화합물의 주요노출기여 식품인 것을 알 수 있었다. 가정식에서 미역국이 1.8x10^(-3) ugTEQ_(BaP)/kg/meal으로, 외식에서는 햄버거가3.9x10^(-3)ugTEQ_(BaP)/kg/meal으로 기여도가 가장 높았다 하루 3회 식사를 고려한 1일 PAHs화합물인체노출량수준은 8.0x10^(-3)~9.7×10^(-3) ug/kg/day 이었다. 본 연구 결과가 PAHs 화합물의 안전성평가와 기준규격설정의 필요성 및 식품안전관리를 위한 규제를 제정하는 기초 자료가 되길 바라며, PAHs화합물의 고노출상황을 줄일 수 있는 개개인의 계획된 식단 작성시, 이에 대한 정보를 제공하고자 한다.
Risk assessment traditionally are conducted on individual chemicals; however, humans are exposed to multiple chemicals in daily life. The organophosphotus (OP) pesticides are considered in a single risk assessment because they act by a common mechanism of toxicity, and there is likely to be expose to multiple OP pesticides simultaneously or sequentially. The OP pesticides act by inhibiting the enzyme acetylcholinesterase (AChE) and have available extensive database. AChE is widely distributed droughout the body, most importantly in the nervous system. Inhibition of AChE results in accumulation of acetylcholine in the nervous system that results in clinical signs of cholinergic toxicity, including increased salivation and lacrimation, nausea and vomiting, muscle fasciculation, lethargy and fatigue, among others. To conduct an exposure assessment for pesticides in the diet, we need to know the food consumption patterns of the population, and the pesticide residue levels in the foods that are consumed. This study was conducted to identify cumulative dietary risk due to multiple OP pesticides that can be exposed through various foods. Total 22 food samples including cereals, vegetables and fruits were collected randomly two times from food markets in several sites (4 cities). The subjected foods were selected by regarding of highly consumed foods to general Korean people. The 12 OP pesticides including Acephate, Azinphos-methyl, Chlorpyrifos, and Diazinon were monitored. For the exposure assessment, general adult group of 60 kg body weight was regarded as target population and food consumption data suggested by Lee et al. (2000) were used as consumed value of individual food Analyses of samples for OP pesticides have been carried out according to the multiclass multiresidue analysis method and acephate and methamidophos analysis method of Korea Food Code. In general the levels of OP pesticides found in the food samples were very low or not detected. The detected highest value was 0.282 ppm as methidathion in mandarin and acephate, chlorpyrifos, methamidophos and methidathion were detected in several foods. To quantify simultaneous exposure, toxic equivalency factor of proportionately corresponding potency giving decreased AChE activity on the basis of reference dose 0.3 ㎍/kg/day to the chlorpyrifos was applied. The estimated dietary daily intake of OP pesticide was 4.52 × 10^(-2) ㎍/kg/day as mean value. The hazard index (HI) is the sum for OP pesticides being considered together was 0.15. The HI less than 1 indicates the exposure may be lower than an acceptable level.
Daily exposure of aflatoxin B₁ (AFB₁) was estimated in foods (rice, barley, soybean, peanut, soysauce, soybean paste) by ELISA (enzyme linked immunosorbent assay) using polyclonal antibody R_(101). Before ELISA, a simple extraction method was applied for the quantitation of AFB₁ in foods using chloroform which showed high recovery (70± 12%). AFB₁ levels in foods were 0.32 ng/ml (rice), 0.24 ng/ml (barley), 0.22 ng/ml (peanut), 0.30-0.78 ng/ml (soysauce), and 0.2 ng/ml (soybean paste). Based on food consumption, we estimated that Koreans were exposed to AFB₁ at the level of 1.86±0.46 ng/kg/day and liver cancer incidence attributed to AFB₁ exposure (assuming that AFB₁ as a single hepatocarcinogenic agent) might be calculated to be 13.1 per 100,000 population. Our data demonstrate that AFB₁ levels in foods were below the regulation of 10 ppb in foods and might not be the major risk factor for the high incidence of liver cancer in Korea.
이산화탄소 농도가 높은 도심지의 경우 탄산화로 인한 철근부식이 발생하기 쉬우며 이는 콘크리트 구조물의 내구수명을 감소시킨다. 콘크리트 구조물의 경우 다양한 구속조건을 가지며 항상 외부의 재하하중을 받고 있다. 도입된 응력수준은 이산화탄소와 같은 유해인자의 확산을 변화시키며 탄산화 깊이의 변동성을 야기한다. 본 연구에서는 응력재하수준에 따른 탄산화 변동성을 정량화하였으며, 이를 이용하여 탄산화 예측식을 도출하였다. 내구성 설계인자인 피복두께, 이산화탄소 확산계수, 탄산화 반응 수화물, 그리고 외부 이산화탄소 농도를 확률 변수로 정의하였으며, MCS을 통하여 영향인자의 변동성에 따른 내구수명을 도출하였다. 또한 응력수준에 따라 변화하는 내구수명을 도출하였으며, 이를 결정론적인 방법의 결과와 비교하였다. 피복두께 및 내부 수화물 생성이 내구수명 변동성에 가장 큰 영향을 미쳤으며, 응력수준 을 고려한 내구수명평가는 유지관리 우선순위 설정에 합리적으로 적용할 수 있다.
콘크리트는 인장력에 취약한 재료적 특징을 갖기 때문에 콘크리트 구조물의 사용기간 중에 발생하는 균열은 내구성능 평가 시 필히 고려되어야 한다. 본 연구에서는 두 수준의 강도를 고려한 플라이애시 콘크리트를 배합하여 옥외 폭로 시험을 실시하였다. 노출 환경은 비말 조건으로 설정하였으며, 균열 폭이 콘크리트의 염화물 확산 거동에 미치는 영향을 평가하고자 각 배합의 시편에 0.1 mm 간격으로 최대 1.0 mm 까지의 균열 폭을 야기하였다. 그 후 3가지 수준의 노출기간(180일, 365일, 730일)을 고려하여 겉보기 염화물 확산계수 및 표면 염화물량을 산출하였다. 균열 폭의 증가에 따라 두 배합 모두 확산계수가 증가하였으며, 노출기간이 증가함에 따라 확산계수는 감소하였다. 또한 노출 기간이 증가함에 따라 균열 폭이 확산계수에 미치는 영향이 감소하였는데, 이는 염소 이온 기반 수화물이 콘크리트의 확산성을 저감시키기 때문으로 사료된다. 표면 염화물량 거동은 겉보기 염화물 확산계수 거동 대비 균열 폭의 증가에 따른 뚜렷한 변화 거동이 발생하지 않았으며, 고강도 배합에서 보통 강도 배합 대비 78.9 % ~ 90.7 %의 표면 염화물량을 나타내어 강도와의 상관관계를 갖는 것으로 판단된다.
본 연구는 시멘트 모르타르속에 매입된 철근주위가 건조될 때 불안정한 전류분포의 영향을 측정하고, 교류 임피던스 특성변화에 대한 영향을 고찰하는 것을 목적으로 한다. 건조과정중 철근의 전기화학적 반응을 측정하기 위해, 두 개의 철근이 매입된 3개의 시멘트 모르타르가 실험을 위해 준비되었다. 주요 변수는 20mm 모르타르 두께를 동일하게 가지도록 하여, 두 철근사이의 간격이 10, 20과 30mm가 되도록 하였다. 해양환경에서 콘크리트 구조물속의 철근 부식속도를 가정하기 위해서, 3개의 모르타르 시험체는 15 사이클의 침지-건조환경(해수에서 24시간 침지와 48시간 실온 건조)에 노출되었다. 부식전위의 변화는 건조중에 용존산소의 확산속도 증가로 인해 귀한 방향으로 이동하는 것이 관찰되었다. 침지-건조환경에서 교류 임피던스는 100kHz에서 1mHz까지 측정되었다. 철근과 모르타르사이의 계면상태를 설명하기 위해 이론적 모델이 제안되었으며, 그것은 용액저항, 전하이동저항과 CPE로 구성된 등가회로를 사용하였다. 철근의 부식이 진행됨에 따라, 저주파수 영역에서 확산 임피던스가 나타났다. 침지-건조 환경중 건조과정에서 이송차가 45o에 가까워지는 현상으로써 전류분포가 불균일해지 는 경향을 보였다.
Chloride attack is one of the most critical deterioration due to rapid corrosion initiation and propagation which can cause structural safety problem. Extended service life through repairing is very important for determination of maintenance strategy. Conventionally adopted models for estimation of LCC (Life Cycle Cost) have shown step-shaped elevation of cost, however the extension of service life is much affected by quality of construction and repairing materials, which means engineering uncertainties in residual service life. In the paper, RC (Reinforced Concrete) column with three different mix proportions exposed to chloride attack are considered, and repairing numbers with related costs are evaluated through probabilistic technique for maintenance. When calculating repair frequency for intended service life through probabilistic model, the required repair frequency is evaluated to be 6.71 times for OPC, 4.09 times for SG30, and 2.95 times for SG 50, respectively. The probabilistic model for repairing cost is evaluated to be effective for reducing the repair frequency reasonably with changing the intended service life and design parameters.
Corrosion durability of steel member can be related to its installed environmental conditions such as relative humidity, rainfall, atmospheric temperature, and air pollution(SO2, chloride). Also its installed environmental condition may differ depending on the shape of structural member. Therefore, In this study, to evaluate the difference in the corrosion damage according to the installation environment of steel structural members, outdoor exposure test was carried out from attaching unpainted monitoring plate and atmospheric corrosion monitoring sensor for actual steel bridge with various structural detail.
This study investigates the coating deterioration of water-borne inorganic zine under marine environment. In order to evaluate the corrosion environment at installed site, the corrosion currents were measured by atmospheric corrosion monitoring(ACM) sensor. The deterioration grade of water-borne inorganic zine was investigated by visual inspection method depending on ASTM D610. The deterioration grade of structural member was compared based on corrosion environment such as wet time, amount of deposited salt etc.