This study was conducted to explore portion size estimation by comparing the measurement errors of food and macronutrient intake by photography estimation and 24-hour recall from weighing method. A total of 28 female participants aged 20-24 years old were provided a meal that included rice, chard soup with soybean paste, stir-fried squid, japchae, stirfried boiled fish paste, lettuce geotjeori, and kimchi. Each portion was measured accurately, and food intake was measured using three dietary assessment methods. For the photography method, trained researchers estimated remaining food amount by analyzing photographs using a mean of four times. The measurement errors for the stir-fried squid and japchae were larger by the 24-hour recall method, while the error for kimchi was larger by the photography method. The correlation coefficients for each food, except chard soup with soybean paste, between the weighing method and photography method were 0.77~0.99 (p<0.001). The correlation coefficients of energy and intake of macronutrients between the weighing method and photography method were 0.85~0.86 (p<0.001). The results of this study demonstrate substantially less measurement error using the photography method than the 24-hour recall method. However, further research is needed to standardize various kinds of foods, photograph angles, serving plates, and serving style for establishment of reliable and valid portion size estimation using the photography method.

본 연구는 사회 감성(Social emotion)중 공감도 정량화 방법을 제안하고자 한다. 비접촉형 센싱 방법인 인체 미동 기술을 이용하였다. 참가자들은 공감한 그룹과 공감하지 않은 그룹으로 분류하였다. 웹캠(Web-cam)을 이용해 표정 Task를 수행하는 동안 영상의 상반신 데이터를 수집하였다. 수집 된 데이터는 각 주파수 성분 별로 0.5 Hz, 1 Hz, 3 Hz, 5 Hz, 15 Hz로 분류하여 추출하였다. 추출 된 데이터는 움직임의 평균과 변화량, 움직임의 동조현상을 비교하였 다. 그 결과 공감한 그룹의 움직임 평균과 움직임의 변화정도가 낮게 나타났다. 공감하지 못한 그룹의 경우 평균 움직임과 변화정도가 큰 것으로 나타났으며 통계적으로 유의한 차이를 보였다. 또한 공감한 그룹의 두 피험자의 경우 표정 Task를 수행하는 동안 움직임에 동조 현상이 나타나는 것을 확인하였다. 이는 두 사람 간에 공감이 형성 되었을 때 자연스럽게 집중을 하게 되고 그에 따라 움직임에 정도가 차이가 나는 것으로 볼 수 있다. 본 연구는 비접촉 센싱 방법을 통해 공감도 측정 가능성을 확인하는데 의의가 있다.

본 연구에서는 연안여객선의 지간선 체계 구축 사업의 추진을 위한 권역 및 항로를 선정 평가하고자 하였다. 이를 위해 먼저 타 교통수단의 위계형성 구조 및 연안여객선 운영체계의 특성을 분석하여 구축 대상권역 및 대상항로 선정을 위한 평가항목을 추출한다. 두번째는 전문가 설문조사를 통해 구축 대상권역 및 대상항로의 평가항목에 대하여 AHP기법을 이용하여 중요도를 산출한다. 마지막으로 평가항목에 대한 중요도와 대상권역 및 항로를 종합평가하여 최종 후보권역 및 항로를 선정하고자 한다. 그 결과 대상권역은 항로수, 여객수송실적, 차량수송실적, 도서민수 등 4개의 평가항목이 추출되었고, 이들 항목으로 평가한 결과 목포권역이 선정되었다. 또한 도서민, 지자체, 지역적 여건, 여객선 사업자 등 4개의 평가항목으로 평가한 결과 영광권 항로가 선정되었다. 한편 확대시행을 위해서는 터미널 시설 확충, 대형 선박의 확보 및 (준)공영제 도입등과 함께 단계적인 추진이 필요하다.

두 종류의 Cronobacter 선택배지(DFI agar, R&F agar) 의 분유 및 건조호박 내 Cronobacter의 선택 분리능을 realtime PCR법과 함께 비교하였다. 분유에서의 Cronobacter 검출률은 세 가지 방법에서 유의적인 차이를 나타내지 않았으나(p < 0.05), 건조호박의 경우 R&F배지와 real-time PCR법이 DFI에서보다 유의적으로 높은 검출률을 보였다 (p < 0.05). 배지 간 선택성에 있어서도, R&F 선택배지는 건조호박에서 DFI에 비해 유의적으로 높은 선택성을 나타냈다(p < 0.05). Real-time PCR 및 R&F배지의 사용은 분유뿐만 아니라, 건조 호박 등의 높은 경쟁세균총을 갖는 영유아식의 원료로 사용될 수 있는 식품군에서도 Cronobacter를 효과적으로 검출할 수 있는 방법으로 사료된다.

There is a growing interest in the application of primary hepatocytes for treatment of liver diseases in humans and for drug development. Several studies have focused on long-term survival and di-differentiation blocking of primary hepatocytes in an in vitro culture system. Therefore, the present study also aimed to optimize an in vitro culture system using primary rat hepatocytes. Primary rat hepatocytes from 6-week-old male Crl:CD rats were isolated using a modified two-step collagenase perfusion. Healthy 3.5 × 106 primary rat hepatocytes were seeded into a 2 dimensional (2D) culture in a 25T culture flask coated with collagen type I or into a 3D culture in a 125-ml spinner flask for 7 days. Production of plasma protein (ALB and TF), apoptosis (BAX and BCL2), and CYP (CYP3A1) related genes were compared between the 2D and 3D culture systems. The 3D culture system had an advantage over the 2D system because of the relatively high expression of ALB and low expression of BAX in the 3D system. However, the level of CYP3A1 did not improve in the 3D culture with and without the presence of a dexamethasone inducer. Therefore, 3D culture has an advantage for albumin production and primary rat hepatocyte survivability, but a low expression of CYP3A1 indicated that primary rat hepatocytes require a high–density culture for stress reduction by continuous flow.

Damages of large embankment dams by recent strong earthquakes in the world highlight the importance of seismic security of dams. Some of recent dam construction projects for water storage and hydropower are located in highly seismic zone, hence the seismic performance evaluation is an important issue. While state-of-the-art numerical analysis technology is generally utilized in practice for seismic performance evaluation of large dams, physical modeling is also carried out where new construction technology is involved or numerical analysis technology cannot simulate the behavior appropriately. Geotechnical centrifuge modeling is widely adopted in earthquake engineering to simulate the seismic behavior of large earth structures, but sometimes it can’t be applied for large embankment dams due to various limitations. This study proposes a dynamic centrifuge testing method for large embankment dams and evaluated its applicability. Scaling relations for a case which model scale and g-level are different could be derived considering the stress conditions and predominant period of the structure, which is equivalent to previously suggested scaling relations. The scaling principles and testing method could be verified by modified modeling of models using a model at different acceleration levels. Finally, its applicability was examined by centrifuge tests for an embankment dam in Korea.

SNS가 일상적 커뮤니케이션 수단으로 자리 잡으면서 2009년 이후로 SNS 이용에 관한 연구 활동이 국내에서 활발하게 진행되고 있다. 그러나 선행연구에서 연구방 법은 상대적으로 덜 주목받아 왔다. 기존의 실험, 서베이, API 분석과 같은 자동 이용 기록 분석법 등은 여러 문제점과 한계를 지니지만 이에 관한 성찰과 개선 노력이 부족했다는 문 제의식에서 이 연구는 이용일지-서베이를 병행하는 새로운 연구방법을 제안하며 그 가능 성을 SNS 관계망 활용과 이용평가의 관계를 분석하는 데 적용하여 탐색했다. SNS의 관계 망 활용은 타인과의 관계 확대 혹은 유지를 목적으로 자신을 표현하는 행위이고, SNS 이용 평가는 관계망을 통해 유통한 정보 및 관계와 이를 얻기 위해 치러야 했던 비용에 대한 인 식으로 살펴보았다. 이를 위해 대학생을 대상으로 SNS 이용행위에 대한 설문조사를 실시 한 후, 3개월 동안 일주일에 두 번씩 SNS 이용일지를 작성하도록 했다. 그리고 일지작성이 끝난 뒤 동일한 내용의 설문조사를 다시 실시했다. 이용일지 분석을 통해 소규모 집단에 대 한 질적 분석을 실시하고, 서베이 분석을 병행하여 객관성을 확보하고자 하였다. 이 연구방 법이 기존의 연구를 전면적으로 대체하지는 못할지라도 기존의 서베이와 실험 등의 연구방 법의 문제를 일부 보완할 수 있음을 확인할 수 있었다.

PURPOSES: The behavior of a concrete pavement in a tunnel was investigated, based on temperature data obtained from the field and FEM analysis. METHODS: The concrete pavement in a tunnel was evaluated via two methods. First, temperature data was collected in air and inside the concrete pavement both outside and inside the tunnel. Second, FEM analysis was used to evaluate the stress condition associated with the slab thickness, joint spacing, dowel, and rock foundation, based on temperature data from the field. RESULTS : Temperature monitoring revealed that the temperature change in the tunnel was lower and more stable than that outside the tunnel. Furthermore, the temperature difference between the top and bottom of the slab was lower inside the tunnel than outside. FEM analysis showed that, in many cases, the stress in the concrete pavement in the tunnel was lower than that outside the tunnel. CONCLUSIONS : Temperature monitoring and the behavior of the concrete pavement in the tunnel revealed that, from an environmental point of view, the condition in the tunnel is advantageous to that outside the tunnel. The behavior in the tunnel was significantly less extreme, and therefore the concrete pavement in the tunnel could be designed more economically, than that outside the tunnel.

Cu-Mn compacts are fabricated by the pulsed current activated sintering method (PCAS) for sputtering target application. For fabricating the compacts, optimized sintering conditions such as the temperature, pulse ratio, pressure, and heating rate are controlled during the sintering process. The final sintering temperature and heating rate required to fabricate the target materials having high density are 700oC and 80oC/min, respectively. The heating directly progresses up to 700oC with a 3 min holding time. The sputtering target materials having high relative density of 100% are fabricated by employing a uniaxial pressure of 60 MPa and a sintering temperature of 700oC without any significant change in the grain size. Also, the shrinkage displacement of the Cu-Mn target materials considerably increases with an increase in the pressure at sintering temperatures up to 700oC.

In this study, ternary compound Max Phase Ti2AlC material was mixed by 3D ball milling as a function of ball milling time. More than 99.5 wt% pure Ti2AlC was synthesized by using spark plasma sintering method at 1000, 1100, 1200, and 1300oC for 60 min. The material characteristics of synthesized samples were examined with relative density, hardness, and electrical conductivity as a function of sintering temperature. The phase composition of bulk was identified by X-ray diffraction. On the basis of FE-SEM result, a terraced structures which consists of several laminated layers were observed. And Ti2AlC bulk material obtained a vickers hardness of 5.1 GPa at the sintering temperature of 1100oC.

목적 : 본 연구는 노인 운전자의 삶의 질을 측정할 수 있는 평가항목을 개발하고자 하였다. 연구방법 : 2014년 4월부터 10월까지 노인 운전과 관련된 전문가 패널 39명을 대상으로 델파이 방법을 적용하여 전문가의 의견을 수집하였다. 델파이 조사는 3차에 걸쳐 진행 되었으며, 1차 델파이 설문에는 선행연구를 근거로 하여 삶의 질에 대한 의미에 맞게 재구성한 40개 폐쇄형 질문과 개방형 질문을 혼합 하여 의견을 수렴하였다. 2차 델파이 설문은 1차 설문의 결과를 바탕으로 항목 삭제 및 수정과정을 거 쳤다. 3차 델파이 설문은 2차 설문의 결과와 응답을 전문가 패널들에게 다시 제시한 후 의견을 최종 수 렴하였다. 결과 : 1차 델파이 결과에서는 64개 항목이 선정되었으며, 2차 델파이 결과에서는 내용타당도 비율 .33이 하의 값들과 의미가 중복되는 항목들을 삭제 및 수정 과정을 거쳐 51개 항목으로 분석되었다. 최종 3차 델파이 결과에서는 51개 항목 중 타당도가 부적합한 2개 항목이 삭제되어 최종 49개 항목이 도출되었 다. 최종 델파이 조사의 평균 내용타당도 비율은 .84, 안정도 .13, 수렴도 .30, 합의도 .85로 높은 일치 도를 보였다. 결론 : 본 연구에서는 노인 운전자의 삶의 질에 관한 평가항목에 대한 내용타당도를 검증하였다. 향후에는 타당도 및 신뢰도 검증을 통해 임상에서 표준화된 평가도구로 활용되기를 기대한다.

In order to deduce an objective evaluation method of motion seasickness incidence (MSI) by ship motions during underway in irregular waves and to present the fundamental data of passenger comfort on the yacht and the passenger ship according to the result, the MSI of the trainees by the questionnaires was analysed and compared with the rate of variation of salivary a -amylase activity (VSAA) on the training ship "A-ra ho" of Jeju national university. Relationship between rate of variation (x) by salivary a -amylase activity and motion seasickness incidence (y) was described by the equation, MSI(%) = 0.6073 x + 12.189 including the correlation coefficient (R 2 = 0.9853). The result obtained through the rate of variation of salivary a -amylase activity which was the quantitative evaluation method for ship motions causing seasickness was most affected by z-vertical acceleration and occurred within the frequency range 0.1 to 0.3Hz centered on 0.2Hz, and the simulation result based on this finding showed the motion seasickness rate at approximately 4% lower than the rate obtained through the survey.

본 논문에서는 재료 점소성-손상모델을 기반으로 한 피로균열 진전속도(FCGR) 전산 평가법을 제안한다. 7% 니켈강 재료 거동을 모사하는 점소성-손상모델을 소개하고, 이의 유한요소해석 플랫폼에의 적용을 위해 상용 유한요소해석 프로그램인 ABAQUS에서 제공하는 사용자 정의 재료 서브루틴(UMAT)에 재료모델을 탑재하였다. 개발 UMAT의 검증을 위해 7% 니켈강 재료 인장시험 시뮬레이션을 수행하였으며, 이를 통해 재료정수를 획득하였다. 또한, 피로하중에 따른 손상해석에 있어 계산 시간 단축을 위한 jump-in-cycles 과정과 임계 손상 값 조정 및 피로 예비 균열 시뮬레이션을 수행하였고 이들 과정을 개발 UMAT에 탑재하여 해석을 수행하였다. 개발 UMAT을 활용하여 7% 니켈강의 상온 FCGR 테스트 시뮬레이션을 수행하였으며, 균열길이(a)와 주기 수(number of cycles)의 관계 및 1 cycle 당 균열성장량(da/dN)과 응력확대계수 진폭(ΔK)의 관계 등의 결과를 실험결과와 비교하여 검증하였다.

PURPOSES: Recently, crack, rutting, and stripping problems from the surface of asphalt pavements in National highway are observed and they affect the drivers to feel uncomfortable on the road. Surface treatments are recommended to use in distressed pavements due to costeffective, and improvement of surface performance. The purpose of this study is to evaluate the performance of micro-surfacing and polymer slurry seal treatments for distressed asphalt pavements. METHODS: Surface conditions and friction resistance are evaluated for asphalt pavements treated with micro-surfacing and polymer slurry seal mixes in National highway 30 line and 34 line. Visual observation is conducted and surface performance is measured by PES (Performance Evaluation Surveyor) in terms of crack ratio, rutting and IRI(International Roughness Index). BPN(British Pendulum Number) is measured by BPT(British Pendulum Tester) to evaluate the friction resistance in the field. RESULTS: The surface evaluation results are presented for asphalt pavement treated with micro-surfacing and polymer slurry seal treatments in National highway 30 line and 34 line. Based on the visual observation, micro-surfacing and polymer slurry seal treatments show better improvements in terms of cracks and stripping. Based on the surface conditions measured by PES vehicle, the surface performance of microsurfacing treatments improves from 53.3% to 54.2% and the surface performance of polymer slurry seal treatments improves from 21.6% to 59.7%. However, the friction resistance of both micro-surfacing and polymer slurry seal treatments decreases from 2.5% to 6.7%. Further, it should be verified to produce the surface exposed with aggregates during the construction process of both treatment methods in the field. CONCLUSIONS : Based on the performance evaluation results in the filed, the surface performance of asphalt pavement treated with micro-surfacing and polymer slurry seal treatments improves from 21.6% to 59.7%. While, the friction resistance of asphalt pavement treated with micro-surfacing and polymer slurry seal treatments does not improve. It can be concluded that current micro-surfacing and polymer slurry seal treatments would improve surface performance but would not improve the friction resistance.

Recently, the technology for smart phones has shown a quantum leap so the market share of mobile games is gradually increasing. User Interface(UI) is a crucial factor in the success of a mobile game. Thus, the mobile game UI evaluation is undoubtedly important. Currently, survey and heuristic evaluation methods are widely used in terms of evaluation. However, these methods have not been proven to show the user experiences. This study suggests a new method using ‘eye tracking’ technology which focuses on where on the mobile screen the user concentrates the most, where the user shows the most interest and how the user’s eyes move on the screen. Experiments have been conducted to verify the availability of eye tracking technology along with the differences between the traditional methods and the eye tracking method.

The object of this study is to investigate the relationship between the air dilution sensory test and the threshold odor number (TON) method for evaluating the odor of domestic wastewater, plating plant wastewater, food plant wastewater and lake water. The dilution factor of raw wastewater evaluated by the air dilution sensory test was in the order of food plant > plating plant > domestic > lake, and that evaluated by the threshold odor number method was in the order of food plant > domestic > plating plant > lake. The same results were obtained when the raw wastewater and lake water were diluted 2 and 5 times with pure water. The relative geometric standard deviation determined from the threshold values of each panel on the air dilution sensory test was much larger than that calculated from results derived from the threshold odor number method. The relative geometric standard deviation obtained from samples with a low dilution factor was greater. There was a very good linear correlation (correlation coefficient = 0.968~1.000) between the air dilution sensory test and the threshold odor number method. But, the reduction in odor intensity (the slopes of regression curves) by dilution was dependent on the types of the odor-emission sources.

This research developed ultra-pressure pump main body by using ductile cast iron FCD500, conducted quantitative analysis on following phenomenon of flow or solidification processing in cast processing for improvement of cast device, after extracting model from cast concluded as follows by brinel hardness test. after selecting the ideal condition of cast and it applied to cast of real product shape, discovered the ideal filling processing under the condition that temperature of molten metal was between 1300℃ and 1280℃. and after finishing filling, solidification was commenced rapidly when percentage of solidification completion was between 40%~50%, at that moment, the termperature was measured 1100℃. moreover under the condition of temperature below 900℃, keeping temperature on the center of parts for a certain period of time brings stability of stabilization of heat in parts and organizational stabilization of ductile cast iron. As the results of the casting method design, it was that the ductile cast parts of pump main body was obtained as the maximum HB of 220 was recorded and good test results were achieved

Recently, conservation and utilization of cultural heritage has been regarded as importance. So, various research papers about maintenance of the remains have been presented in many conferences. But most of researches have focused on introduction about maintenance methods and explanation about maintenance concepts of remains. And even in case of a few papers treated post-evaluation about maintenance of the remains the criteria of the evaluation has tended to somewhat subjective. So, the purpose of this study is to show the objective post-evaluation indexes which was developed by Delphi · AHP methods. This research was proceeded in two stages. First, we arranged the evaluation index in a hierarchy to be made through the analyses about references and researches about maintenance of remains. 304 evaluation articles were elicited through the process. And then, elicited evaluation articles were classified with 'conservation' and 'utilization'. Second step was to figure out importance and validity of hierarchical evaluation articles with twice questionnaire surveys. This research used interval scale to comprehend validity and AHP method to evaluate relative importance of each other articles.