국내 Y정수처리시설에 20-40 m3/m2/h의 표면부하율을 갖는 고속 용존공기부상공정을 도입하였다. 우선, 용존공기부상공정과 입상활성탄 공정이 결합된 반응기를 일처리용량 500 m3/day의 조건으로 운전하였다. 운전결과는 두 공정이 원수내 탁도, 조류, 지오스민, 2-MIB를 감소시킬 수 있음을 증명하였다. 도출된 최적 설계요소를 활용하여 현장규모의 공정(5,000 m3/day)에 용존공기부상공정을 도입하였다. 여름철 56일간 조류와 탁도 제거율을 평가하였다. 처리수 내 조류의 개체수는 20-30 cells/mL 이하로 유지되었으며, 조류 제거효율은 80-89%를 기록하였다. 침전법 및 용존공기부상공정 처리수질의 탁도 제거효율을 비교한 결과 평균 탁도 제거효율은 77%를 나타냈다. 이러한 결과들은 고속 용존공기부상공정이 여름철 음용수의 탁도 및 조류와 같은 저밀도 고형물을 제거하는데 유의미한 방법임을 나타냈으며, GAC는 맛･냄새를 유발하는 화합물(지오스민, 2-MIB)를 제거할 수 있는 공정 옵션인 것을 확인하였다.

본 연구는 장미 ‘Bubble Gum’의 절화수명을 연장시키기 위하여 미산성 차아염소산수(Slightly acidic hypochlorous water, HOCl, pH 6.26)의 처리효과와 절화수명 연장제로써 의 가능성을 구명하고자 수행되었다. 침지처리는 30μL･L-1의 미산성 차아염소산수를 0분, 0.5분, 1분, 3분, 5분간 침지처 리 후 수돗물(Tap water, control)에 꽂아 두었다. 대조구의 절화수명은 8.7일인데 비해 5분 침치처리 시 10.8일로 대조 구보다 2.1일 수명을 연장시켰다. 상대생체중은 모든 처리구 에서 2일까지 증가하였고, 수분흡수율은 모든 처리구에서 6일 까지 증가하다가 감소하는 추세를 보였다. 화색 변화율인 ΔE 값은 3분(5.25), 5분(6.48), 30초(6.65), 1분(6.79) 침지처리 에서 대조구보다 낮았으며, 상대 화폭 증가율은 5분 침지 처 리구가 145%로 화폭의 증가율이 가장 컸고, 엽록소함량은 처 리 간 차이가 없었다. 결론적으로 절화장미 ‘Bubble Gum’의 절화수명은 미산성 차아염소산수의 5분 침지 처리가 효과적 으로 연장시켰다.

This study investigated variables for improving adhesive strength using laser surface treatment when bonding dissimilar materials using adhesives. adhesive strength analysis was performed for CFRP and Al6061 by laser irradiation intensity, and surface roughness was measured to analyze the related results. In the case of CFRP, the adhesive strength was good when the surface was not treated. In the case of Al6061, the adhesive strength was 25 MPa when the surface was treated with 20W, the maximum output of the laser surface treatment equipment, and the adhesive strength was improved by 125% compared to the untreated specimen. In addition, by measuring the surface roughness in the experiment, it was confirmed that the higher the surface roughness, the better the adhesive strength.

The purpose of this study was to compare the efficiency of air and oxygen injected into the underwater non-thermal dielectric barrier discharge plasma (DBD plasma) device used to remove five types of antibiotics (tetracycline, doxycycline, oxytetracycline, clindamycin, and erythromycin) artificially contained in the fish farm discharge water. The voltage given to generate DBD plasma was 27.8 kV, and the measurement intervals were 0, 0.5, 1, 2, 4, 8, 16 and 32 minutes. Tetracycline antibiotics significantly decreased in 4 minutes when air was injected and were reduced in 30 seconds when oxygen was injected. After the introduction of air and oxygen at 32 minutes, 78.1% and 95.8% of tetracycline were removed, 77.1% and 96.3% of doxycycline were removed, and 77.1% and 95.5% of oxytetracycline were removed, respectively. In air and oxygen, 59.6% and 83.0% of clindamycin and 53.3% and 74.3% of erythromycin were removed, respectively. The two antibiotics showed lower removal efficiency than tetracyclines. In conclusion, fish farm discharge water contains five different types of antibiotics that can be reduced using underwater DBD plasma, and oxygen gas injection outperformed air in terms of removal efficiency.

Yttria-stabilized zirconia (YSZ) has a low thermal conductivity, high thermal expansion coefficient, and excellent mechanical properties; thus, it is used as a thermal barrier coating material for gas turbines. However, during long-time exposure of YSZ to temperatures of 1200oC or higher, a phase transformation accompanied by a volume change occurs, causing the YSZ coating layer to peel off. To solve this problem, YSZ has been doped with trivalent and tetravalent oxides to obtain coating materials with low thermal conductivity and suppressed phase transformation of zirconia. In this study, YSZ is doped with trivalent oxides, Nd2O3, Yb2O3, Al2O3, and tetravalent oxide, TiO2, and the thermal conductivity of the obtained materials is analyzed according to the composition; furthermore, the relative density change, microstructure change, and m-phase formation behavior are analyzed during long-time heat treatment at high temperatures.

The quality and antioxidant characteristics of apios (Apios americana Medikus) according to different harvest periods and steaming treatment were investigated. The quality and antioxidant characteristics of apios were significantly different depending on harvest periods. Total starch contents was higher in 1st harvesting period as 62.32 g/100 g than other harvesting period. The water binding capacity and water solubility index was higher in 1st harvesting period as 228.65 and 11.29% than other harvesting period. The sucrose and total free sugar contents were 3.64~8.67 and 4.49~9.54 g/100 g, respectively. Total polyphenol and flavonoid contents of apios was the highest 2nd and 4th harvesting period at 4.21 mg GAE/g and 611.11 μg CE/g, respectively. DPPH radical scavenging activity was higher in 1st harvesting period as 84.96 mg TE/100 g than other harvesting period, and decreased as the harvest periods were delayed. ABTS radical scavenging activity and ferric-reducing antioxidant power were 43.81~47.89 mg TE/g and 231.20~264.07 mM/100 g, and increased to 50.58~51.44 mg TE/g and 342.55~384.29 mM/100 g after heat treatment. As a result, it is thought that studies on change of quality and physicochemical characteristics according to cultivation characteristics should be preceded for cultivation stability of apios.

The object of this study is to feasibility assesment for co-digestion efficiency of food waste recycling wastewater(FWR) with thermal hydrolysis process dehydration cake (THP Sludge). As a result of THP pre-treatment experimental conditions to 160oC and 30 minutes, the solubility rate(conversion rate of TCOD to SCOD) of the THP sludge increased by 34%. And the bio-methane potential in the THP sludge increased by about 1.42 times from 0.230 to 0.328 m3 CH4/kg VS compared to the non-pre-treatment. The substrates of the co-digestion reactor were FWR and THP sludge at a 1:1 ratio. Whereas, only FWR was used as a substrate in the digestion reactor as a control group. The experimental conditions are 28.5 days of hydraulic retention time(HRT) and 3.5 kg VS/m3-day of organic loading rate(OLR). During the 120 days operation period, the co-digestion reactor was able to operate stably in terms of water quality and methane production, but the FWR digestion reactor deteriorated after 90 days, and methane production decreased to 0.233 m3 CH4/kg VS, which is 67% of normal condition. After 120 days of the experiment, organic loading rate(OLR) of co-digestion reactor was gradually increased to 4.5 kg VS/m3-day and operated for 80 days. Methane production during 80 days was evaluated to be good at the level of 0.349 m3 CH4/kg VS. As a result of evaluating the dehydration efficiency of the sludge before/after 150-180oC THP using a filter press, it was confirmed that the moisture content of the sludge treated before THP at 180oC was 75% and improved by 8% from 83-85% level. Therefore, it is expected that the co-digestion reactor of FWR and THP sludge will ensure stable treatment water quality and increase bio-methane production and reduction effect of dehydration sludge volume.

The types and distribution ratio of odor removal systems installed in publicly owned environmental facilities such as sewage treatment, wastewater treatment, manure treatment, livestock manure treatment, and food waste treatment were investigated. Since the intensity of the odor and the composition of the odor substances are different depending on the type of each public treatment facility, different odor removal efficiencies were derived depending on the applied odor removal technology. In addition, the removal efficiency of complex odors and individual odor substances of odor removal systems such as those applying biofilters, scrubbers, and adsorption towers were also compared and evaluated. Although it depends on each odor removal technology and application facility, about 50% of various odor removal systems presented an odor removal performance of less than 30%. The odor removal systems with an odor removal efficiency of 70% or more were evaluated to be less than 30% of the total number. Therefore, we suggest that odor removal efficiencies should be improved through continuous monitoring, diagnosis, reinforcement of maintenance, and improvement of systems.

Due to the rapid growth of electrical vehicle and portable electronics markets, huge amount of the rare earth elements (REEs) and lithium have been required for the manufacturers globally. Moreover, after life time of the battery pass, the waste batteries containing valuable metal resources should be recycled due to competitions between the countries who manufacturing the batteries. Therefore, the REEs and lithium recoveries from the e-waste and wastewaters become issue recently. However, the commercialized technology for the valuable metal recovery is limited. In this study, the uses of the REEs and other valuable metal resources such as lithium, uranium, and gold and there recoverying methods according to the different water conditions were investigated and summarized. Moreover, the possible expectations and suggestions for the future application of the valuable resource recovery were conducted as a review.

Public complaints arising from centralized animal manure treatment plants are increasing due to the odors produced during animal manure treatment. Various physico chemical and biological methods are used to mitigate such odors. Still, many problems exist, such as a lack of fundamental data on odor generation characteristics and design standards for odor mitigation facilities. Therefore, this study evaluated the characteristics of NH3 and H2S gas produced from a centralized animal manure treatment plant. The centralized animal manure treatment plant selected in this study has a treatment capacity of 150 tons (animal manure and food waste) per day. The composting matrix was mechanically turned from 9:00 am to 6:00 pm on weekdays and not turned all day on weekends. The NH3 concentrations measured during the day on weekdays (96.4 ± 7.8 ppmv) were about 14% higher than on weekends (84.9 ± 15.9 ppmv). During the week, the ammonia concentration during the day was about 15% higher than at night, but there was no difference between day and night on weekends. The hydrogen sulfide concentration during the day (4,729 ± 3,687 ppbv) on a weekday was about 4.7 times higher than at night (1,007 ± 466 ppbv). The results of this study provide valuable information that is necessary for the operation of odor mitigation facilities. It is expected that the results will contribute to establishing an operational strategy that can reduce the energy required to collect exhaust gas.

본 연구는 광나무(Ligustrum japonicum) 종자의 파종 효율성 및 유묘 생산성을 증진시키기 위하여, 발아와 균일성에 효과가 있는 priming 처리 중 처리시간, 처리제 및 처리농도를 비교·분석하여 적절한 전처리 조건을 구명하고자 실시하였다. 광나무 종자는 충실 종자를 사용하기 위해 1일간 침지처리 후 침강 종자만을 사용하였다. 종자 전처리는 priming 처리시간(24, 48시간)에 따라 GA3 (0, 10, 100, 200 ㎎·L-1) 생장조절제와 Ca(NO3)2 및 KNO3 (0, 50, 100, 200 mM) 무기염류로 처리하여 시험을 수행하였다. 발아특성을 분석한 결과 priming 24시간 처리는 대조구보다 유의적으로 높은 발아율, 발아속도, 발아균일지수를 보인 반면(p≤0.001), priming 48시간 처리 시 대조구보다 낮은 발아특성을 나타냈다. 특히, priming 24시간·GA3 200 ㎎ 처리에서 발아율 44.0%, 발아속도 0.59%·day, 발아균일지수 0.55으로 가장 높은 효과를 보였다(p≤0.001). 한편, priming 48시간·GA3 및 Ca(NO3)2 200 mM 처리구에서는 발아가 나타나지 않았다. priming 처리된 종자로부터 생장한 유묘들을 대상으로 T/R율 및 유묘활력지수를 조사한 결과 발아율이 가장 높았던 priming 24시간·GA3 200 ㎎ 처리에서 낮은 T/R율과 수분감소율을 보였으며, 유묘 활력지수는 793.0으로 가장 높게 나타났다(p≤0.001). 결과적으로 priming 종류(GA3, Ca(NO3)2, KNO3) 중 광나무 종자 발아 및 유묘의 생장에 영향을 적정 처리제는 GA3로 판단되며, 적정 처리 조건은 200 ㎎, 24시간 처리로 나타났다.

이 연구에서는 DNA 메틸화 억제제의 처리방법에 따라 밀 염색체와 발아 초기 생육 특성에 미치는 영향을 조사하였다. 종자를 DNA 메틸화 억제제 수용액에 침종한 처리구와 증류수 침종 후에 발아 시 DNA 메틸화 억제제 수용액을 뿌리가 흡수하는 처리구의 체세포 분열 중기 염색체 관찰 및 발아 초기의 생육을 조사하였다. 두 처리방법에서 초엽과 유근의 신장이 대조구보다 억제되는 것을 확인하였으며, 이러한 현상은 뿌리 분열 조직 세포의 활동성에 DNA 메틸화 억제제가 영향을 주어 체세포 분열 지수가 낮아지는 것을 확인하였다. 초엽과 유근의 신장은 DNA 메틸화 억제제 수용액의 흡수처리구에서 침종처리구보다 유의미하게 더 억제되었지만 침종과 흡수처리구 간의 체세포 분열지수는 유의한 차리를 보이지 않았다. 두 처리구(침종 및 흡수)에서 틈과 염색체 절단 같은 염색체 이상이 확인되었으며, 침종처리구에서는 염색체 풀림 현상과 짧은 염색체가 추가로 발생하였다.

Following the previous study, the toxicity of a single subcutaneous administration of the Thyrokitty injection (I-131) and the side effects that may occur at therapeutic doses were confirmed. The Thyrokitty injection (I-131) was administered subcutaneously once at a dose of 0, 2.0, 6.0, and 18.0 mCi/kg, 5 male and female rats per group, and mortality, general symptom observation, and weight measurement were performed for 2 weeks, followed by observation of autopsy findings. There were no deaths, and no statistically significant weight change was observed. Mild hair loss, fissures, and crusting were observed by general symptom observation, but it was not a toxic change related to the Thyrokitty injection (I-131). Gastric atrophy and a decrease in the size of the spleen were observed by the autopsy. As a results of single subcutaneous administration of the Thyrokitty Injection (I-131) to rats at a maximum dose of 18.0 mCi/kg, a decrease in the size of the spleen and gastric atrophy were observed as the dose of the Thyrokitty Injection (I-131) increased, which may be related to the test substance. No abnormal findings related to the Thyrokitty injection (I-131) were observed. Therefore, the approximate lethal dose of the Thyrokitty injection (I-131) was 18.0 mCi/kg or more. In addition, as reported for the treatment of feline hyperthyroidism with radioiodine (131I), side effects of the Thyrokitty injection (I-131) are expected to be extremely rare. Temporary dysphagia and fever may occur, but it will recover naturally. It should be administered with caution in cats with diseases such as urinary system, cardiovascular system, gastrointestinal system and endocrine system, especially with kidney disease. And it should not be used in cats who are pregnant, lactating, or likely. It is expected that the Thyrokitty injection (I-131) can be used for clinical treatment in Korea as a veterinary drug.

Radioiodine (131I) has been used for the treatment of feline hyperthyroidism since the 1990s in the USA and Europe, and it is recommended as the most effective treatment for feline hyperthyroidism because it has a high therapeutic effect, small side effects, and does not require anesthesia. In this study, the pharmacological properties of the Thyrokitty injection (I-131), which is being developed as a treatment for feline hyperthyroidism, using radioiodine (131I) as an active ingredient, was tested. The %cell uptake of the Thyrokitty injection (I-131) in FRTL- 5 thyroid cells was 0.410 ± 0.016%, which was about 18 times higher compared to Clone 9 hepatocytes, and it was decreased by 30.7% due to the competitive reaction with iodine (sodium iodide). In addition, the %cell growth of the FRTL-5 thyroid cells was reduced by 25.0% by treatment with the Thyrokitty injection (I-131). As a result of the tissue distribution test, the Thyrokitty injection (I-131) was distributed at the highest concentration at 0.083 hours (5 minutes) after subcutaneous administration to animals in most organs except the stomach, small intestine, large intestine, muscle and thyroid gland, and it was excreted mainly through the kidneys. The stomach and thyroid gland showed a typical distribution pattern observed when radioiodine (131I) was administered. In addition, about 78.45% of the total amount of excretion was excreted within 48 hours, of which more than 85% was excreted in urine. In conclusion, the Thyrokitty injection (I-131) has the same mechanism of action, potency, absorption, distribution, metabolism and excretion characteristics as radioiodine (131I) reported in connection with the treatment of feline hyperthyroidism. In the future, using the results of this study, it is expected that the Thyrokitty (I-131) could be safely used in the clinical treatment of feline hyperthyroidism.

나노여과막(NF)은 식품가공, 제약 등 폐수는 물론 지자체 하수처리시설에서 배출되는 폐수 처리에 있어 훨씬 낮 은 압력으로 운용이 가능해 역삼투막(RO)보다 인기가 높다. NF막의 경우 분리 메커니즘은 투과확산 기작과 더불어 RO 박막 보다 낮은 가교밀도로 인한 체거름 메커니즘이다. 막 오염은 세라믹 막과 달리 고분자 막의 경우 나노 여과 공정의 고질적인 문제 중 하나이다. 이러한 문제를 해결하기 위해 차아염소산나트륨을 사용한 멤브레인 세척이 이루어진다. 폴리머 멤브레인 에 비해 세라믹 멤브레인은 이러한 화합물에 매우 안정적이다. 본 리뷰에서는 NF 프로세스에 의한 폐수 처리의 다양한 유형 의 세라믹 막 적용에 대해 논의한다.

이 연구의 목적은 교도소 수형자와 관련한 사회적 처우의 실태를 파악하고 그 개선 방향을 제시하는 것이다. 현재 교도소의 사회적 처우는 법적 근거, 개념 및 종류가 명 확하지 않고, 매우 소극적으로 시행되며, 대상자 선정 기준이 모호한 것으로 나타났 다. 그리고 사회적 처우의 효과 즉, 재범억제, 가족유대감, 안정감 등에 대한 진단이 이루어지지 않고 있다. 그 개선 정책 방향으로 형집행법령에 사회적 처우의 근거, 개 념 및 유형을 명확하게 규정하며, 법무부는 사회적 처우와 관련한 행정지침을 단일화 하고, 사회적 처우 대상 선정을 공정하게 하여야 한다. 그리고 인권적 차원에서 사회 적 처우를 적극적으로 시행하며, 지속적인 효과성 진단을 해야 한다.

PURPOSES : The effects of strontium cations on the strength of hydrated cement composites as well as the morphology and chemical composition changes of cement hydrates due to strontium treatment are investigated in this study. Subsequently, the potential of a strontiumbased aqueous solution as a near-surface treatment method for hydrated cement composites is evaluated. METHODS : To supply strontium cations to a hydrated cement composite, a 30% strontium nitrate aqueous solution was used. Cement paste (w/c = 0.4) specimens were prepared and cured in the 30% strontium nitrate aqueous solution, which allows the strontium ions to penetrate into the specimen and treat the near-surface region. Compressive and flexural strength tests were performed on both specimens treated by the strontium ions and untreated specimens cured in deionized water, and the test results were compared. To investigate the changes in the morphology and chemical compositions of the cement hydrates due to the treatment, scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS) analyses were performed. RESULTS : The results of the strength tests indicate that both the compressive and flexural strengths of the specimens cured in the 30% strontium nitrate aqueous solution improved significantly compared with the specimens cured in deionized water for the same duration. In particular, the strontium nitrate aqueous solution shows greater improvement in terms of the flexural strength compared with the compressive strength. The maximum penetration depth of strontium into the hydrated cement composite is 5 mm during the first 7 d of immersion and increases to 6.5 mm during the subsequent 14 d. The SEM results show that the microstructure of the hydrated cement composite is densified by the strontium nitrate aqueous solution treatment. The EDS results show that morphology and chemical compositions of the cement hydrates are altered. This implies that the strontium cations can be combined with C–S–H and C–S–A–H phases to form new types of hydrates. CONCLUSIONS : The experimentally results show that the strength of hydrated cement composites can be improved by modifying their near-surface regions via the strontium cation penetration technique. This implies that the strontium-based aqueous solution exhibits high potential for the maintenance and rehabilitation of concrete structures.

PURPOSES : The objective of this study is to analyze the significance of binder aging in a hot-mix asphalt (HMA) mixture in an insulated camber for a long duration for repair works, where the absolute viscosity level and service life reduction (SLR) are assessed based on the haul time, as well as to suggest a methodology for reducing the aging level. METHODS : Because the HMA mixture is stored in an insulated box carriage at high temperature for repair works, if the binder in the mix is severely oxidized, then the repaired pavement will not exhibit a long service life. Therefore, the 13-mm dense-graded HMA mix with PG64-22 was aged in an oven at 160 °C for 1, 2, 4 and 8 h to evaluate its aging level. Gel-permeation chromatography was performed on the mixture particle without binder recovery to measure the large-molecular size ratio, from which the estimated absolute viscosity (EAV) was computed using a best-fit regression model. The SLR values of aged and repaired mixes were estimated to determine the amount of deterioration in the mixes caused by severe aging. Hydrated lime (HL) was introduced into the mix at a ratio of 1.5 wt% of the total mix. The aging level and SLR were compared with those of the repaired mix without HL. RESULTS : The binder EAV of the HMA mix increases significantly with the mixture aging duration. In particular, the binder EAV level of a 4-h aged mix is similar to the asphalt viscosity level of a pavement with approximately 7 years of service life. The service life expressed based on the aging level is interpreted as the reduced service life of the aged mix, which is already oxidized before it is used. Meanwhile, the binder of an 8-h aged mix without HL aged significantly and its SLR is approximately 11 years. However, its aging level and SLR reduced significantly when HL. is incorporated. CONCLUSIONS : The binder aging level of the repaired mix increases significantly with its storage duration in a hot chamber for carriage. However, since the aging level decreases significantly by the incorporation of HL, the use of HL is highly recommended when preparing new mix for repair works to be performed in a hot-chamber for a long duration.

시설재배지 고추를 가해하는 꽃노랑총채벌레(Frankliniella occidentalis)를 대상으로 미끌애꽃노린재(Orius laevigatus)를 이용한 생물적 방 제가 검토되고 있다. 그러나 대상 해충의 빠른 집단 성장은 화학 살충제의 투입이 때에 따라 요구된다. 본 연구는 화학 살충제와 천적의 이상적 종합 방제를 구현하기 위한 목적으로 선택성이 높은 살충제 선발 및 이들 살충제 처리 이후 미끌애꽃노린재의 안전한 재투입 시기를 결정하기 위해 수행 되었다. 첫째로 꽃노랑총채벌레에 방제 효과가 높은 상용 살충제가 선발되었다. 총 17종류의 상용 살충제 가운데 5종류(pyriproxyfen+ spinetoram, abamectin, spinosad, acetamiprid, chlorpyrifos) 주성분을 갖는 상용 살충제가 꽃노랑총채벌레에 우수한 방제효과를 주는 약제로 선발되었다. 이들 5종류의 살충제에 대해서 미끌애꽃노린재의 감수성 반응은 꽃노랑총채벌레와 상이하였다. 특별히 아바멕틴과 스피네토람이 유 기인계 또는 네오니코티노이드에 비해 상대적으로 낮은 독성을 보였다. 이들 5종류의 살충제 처리 이후 잔류 독성을 미끌애꽃노린재를 이용하여 생물검정한 결과 유기인계 및 네오니코티노이드 약제는 비교적 오랜 기간 독성을 유지하지만, 아바멕틴과 스피네토람 약제의 경우 3일 이후에는 대상 천적에 피해를 주지 않는 것으로 나타났다. 이러한 잔류독성결과는 LC-MS/MS를 이용한 농약 잔류량 화학분석을 통해 뒷받침되었다. 이상 의 결과는 높은 밀도로 증가한 꽃노랑총채벌레에 대해서 이 해충에 살충성이 높은 아바멕틴 또는 스피네토람의 약제를 살포하고 이후 3일 지나 미 끌애꽃노린재의 투입을 통해 대상 해충의 평균 밀도를 경제적피해수준 이하로 유지할 수 있다는 종합방제 기술을 제시하고 있다.

This study aimed to investigate the effects of antioxidant and anti-inflammatory activities of heat-killed lactic acid bacteria (LAB) produced under different temperature conditions. Regarding probiotic properties, Limosilactobacillus fermentum SMF743 and Lactiplantibacillus plantarum SMF796 isolated from kimchi showed strong acid and bile salt resistance, adhesion activity onto HT-29 cells, and antimicrobial activity against pathogenic bacteria. Based on the results of thermal death time and temperature, heat-killed LAB cells (1 mg/mL) were prepared by heating at 70oC (180 min), 80oC (120 min), 100oC (30 min), and 121oC (15 min). The heat-killed SMF743 and SMF796 showed significantly higher DPPH and ABTS radical scavenging activities than live cells (p<0.05). The heat-killed SMF743 and SMF796 at 70oC or 121oC revealed stronger DPPH and ABTS radical scavenging activities and inhibition of nitric oxide production than those at 80oC or 100oC. Furthermore, heat-killed SMF743 and SMF796 at 121oC significantly reduced the gene expression levels of tumor necrosis factor-, inducible nitric oxide synthase, and cyclooxygenase- 2 up to 53.33%, 58.67%, and 83.67%, respectively, in lipopolysaccharide (LPS)-induced RAW264.7 cells (p<0.05). These results suggest that heat-killed L. fermentum SMF743 and L. plantarum SMF796 can be used as natural antioxidants and anti-inflammatory agents.