산업화와 도시화의 급속한 발전으로 교통량이 증가하면서, 도로 비산먼지와 같은 대기 오염 문제가 심각해지고 있다. 특히, 도로에 서 발생하는 미세먼지의 주요 원인인 비배기가스의 일환인 도로 비산먼지(Road suspended dust)는 대기 질을 저하시킬 뿐만 아니라, 인 체 건강에도 여러 가지 해로운 영향을 미친다. 이에 비산먼지 예측 모형식을 개발하기 위해 도심부 도로 내 비산먼지 측정차량을 운 영하고 있으나, 측정 시 주변 환경에 영향을 많이 미치기 때문에 보다 신뢰성 있는 결과를 위해서는 앞차에서 발생하는 배기가스 영 향권을 최소화하여 노면-타이어에서 발생하는 순수 비산먼지 농도를 측정할 필요가 있다. 따라서 본 연구의 목적은 차량의 주행 패턴 에 따라 도로 비산먼지 농도가 어떻게 변화하는지를 분석하고, 거리별 배기가스의 영향력을 평가하고자 하였다. 먼저, 이동식 비산먼지 측정차량을 활용하여 측정차량을 기준으로 차량 간의 거리(10m, 20m, 50m)와 도심부에서 발생할 수 있는 대표 적인 주행행태(전방 2대 직진, 전방 2대 평행, 전방 3대 직진)에 따른 도로 비산먼지 농도의 변화를 측정하였다. 실험 결과, 차량 간 거리가 가까운 10m일 때 비산먼지 농도가 가장 높았으며, 이 때의 농도는 20m 또는 50m 거리에서 측정된 농도보다 유의미하게 증가 하는 경향을 보였다. 특히, 20m 거리에서는 비산먼지 농도가 낮아지는 경향이 뚜렷하였으며, 이는 차량의 배기가스가 도로에서 발생하 는 비산먼지에 미치는 영향이 줄어드는 것을 나타낸다. 또한 전방에 3대의 차량이 직진으로 주행할 경우 앞차량에 의해 비산된 먼지 가 계속 공기중으로 비산되어 측정차량에서는 낮게 나타나는 것으로 분석되었다. 이러한 결과는 도시 내에서 비산먼지에 기반한 안전 거리를 설정하는 데 중요한 기초 자료로 활용될 수 있으며, 측정차량 운영 시 앞차에서 발생하는 배기가스의 영향을 최소화하여 비산 먼지 농도만을 측정할 수 있는 자료로 활용될 수 있다. 본 연구는 배기가스가 도로 비산먼지 농도에 미치는 영향을 실증적으로 분석함으로써, 대기질 개선을 위한 보다 효과적인 정책 수립 에 기여할 것으로 기대된다. 궁극적으로, 도심부 도로 내 도로 비산먼지에 대한 영향을 고려할 때 배기가스에 따른 농도 변화를 이해 함으로써, 향후 도시 환경에서의 지속 가능한 교통 관리와 대기질 개선 전략을 개발하는 데 중요한 기초 자료가 될 것으로 판단된다.

Biodiesel is a traditional energy field that can replace low-quality marine fuels for ships and various studies have been conducted. Since the 2000s, Korea has introduced a mandatory supply system of biodiesel for domestic vehicle diesel, gradually raising the blending ratio from 0.5% to 3.5%, and is expected to raise the mandatory blending ratio to about 8.0% by 2030. Therefore, in this study attempted to blend high-quality samples that meet the biodiesel quality standards manufactured by domestic companies with MGO in ratios ranging from 0 to 60%. We utilized a 1-ton combustion chamber to compare and analyze the exhaust gas emissions characteristics. As a result, in the BD60 condition, which represents the maximum range in this study, the O2 increased by approximately 1.5%p, and CO2 tended to decrease by 1.1%p. NOx decreased by approximately 18.2%p from 34.1 ppm to 27.9 ppm. In the case of SOx, a very low concentration of 0.08 ppm was detected under the BD0 condition, and it was undetectable under all other conditions containing biodiesel. This suggests that MGO itself has excellent low-sulfur oil quality and can implement zero SOx through biodiesel mixing. Furthermore the combustion efficiency decreased by approximately 1.91%, from 72% to 70.2%, and the exhaust gas temperature also decreased by about 4.5%p. However despite the lower calorific value of biodiesel compared to MGO, it demonstrated relatively close thermal output per unit content. This indicates sufficient potential for biodiesel to serve as a viable alternative fuel for ships in the future.

본 연구는 축산시설 내 설치된 무창기공형 집열기의 배기 방향 및 유량 변화를 통해 벽체에 전달되는 일사를 차단, 이를 통한 냉방효과를 검증하려는 목적의 기초 연구로서 무창기공형 집열기 시험장치를 제작, 배기 유량 변화에 따른 위치별 온도 변화 및 이를 통한 열성능 평가를 수행하였다. 실험 결과, 무창기공형 집열기의 유량조건별 집열판 표면온도는 최고 27.7℃, 배기온도는 최고 약 10.9℃ 온도 차이를 확인하였다. 무창기공형 집열기의 유량조건별 열교환 유효도는 0.48∼0.62, 효율은 30%∼90%의 분포로 나타났다. 집열판 에너지는 유량이 증가함에 따라 감소, 집열기 내부 에너지는 유량이 증가함에 따라 증가하였다. 이를 통해 농업시설 외벽에 설치된 무창기공형 집열기의 여름철 미운용으로 인한 집열판 및 내부 온도상승과 이로 인한 벽체로의 열전달 등 무창기공형 집열기로 인한 역효과를 방지할 수 있을 뿐만 아니라 집열기 외부로의 강제 배기를 통해 벽체로 직접 투입되는 일사 차단을 통한 냉방효과 또한 구현할 수 있을 것으로 판단된다.

Cars using diesel have always had problems with reducing exhaust fumes, and have been studied steadily in this regard. There were studies on the remanufacturing effect of DOC catalyst deactivated by diesel vehicle smoke reduction device, analysis of vehicle fire accident cases caused by damage to diesel vehicle smoke reduction device, and related studies on the remanufacturing effect of diesel vehicle smoke reduction device DPF. This study also developed a burner system in a smoke reduction device suitable for exhaust engines to completely burn smoke generated by institutions using diesel engines in low-temperature exhaust gases. Following the development of the existing high-performance heater, burner structure capable of maintaining ignition state in exhaust flow, pulsation generated by diesel engines, and exhaust flow control unit, the actual configuration, function and effect of the device, development contents, basic data and abnormalities of the vehicle, and comparison with other developed products.

In this study, a condensate drain valve was newly installed in the steam inlet pipe line of the soot blower to reduce the amount of condensate contained in the steam for the soot blower. When the economizer is inactive, the condensate drain valve on the soot blower steam inlet pipe line is always opened to drain the condensate. It is intended to reduce environmental pollution and improve economizer performance by reducing the water hammer that inevitably occurs in facilities using steam, and reducing the amount of condensate water generated during the shutdown of the soot blower and the release of soot containing condensate water into the atmosphere when removing soot.

Recently a biosafety level-3(BL-3) mobile laboratory has been set up for the virus scanning and vaccine development because of the COVID-19 pandemic. The study on air flow inlet and outlet location and its flow direction with ventilation in the mobile laboratory needs to prevent spread of COVID-19 virus because the COVID-19 virus is primarily transmitted to people through respiratory droplets and aerosol coming out as their coughing. This study is conducted on the air flow pattern optimization in BL-3 mobile laboratory with various design specifications of position of air supply & exhaust port and particle source. Air flow patterns of ceiling supply-exhaust and ceiling supply-bottom side exhaust with particle source were determined to compare the impact of the infection prevention. CFD simulation was used to analyze for two air flow patterns and particle source position. Numerical results showed that air flow pattern of air conditioning system with ceiling supply-exhaust in a row is more effective than that of ceiling supply-bottom side exhaust air flow pattern in terms of infection prevention in biosafety mobile laboratory.

Cars using diesel have always had problems with reducing exhaust fumes, and have been studied steadily in this regard. There were studies on the remanufacturing effect of DOC catalyst deactivated by diesel vehicle smoke reduction device, analysis of vehicle fire accident cases caused by damage to diesel vehicle smoke reduction device, and related studies on the remanufacturing effect of diesel vehicle smoke reduction device DPF. This study is also to develop an exhaust flow control unit suitable for an exhaust engine to completely burn smoke generated by an engine using a diesel engine in a low temperature exhaust gas. The main systems to be developed are high-performance heaters, burner structures that can maintain ignition in exhaust flows, and exhaust flow control units that reduce exhaust gas backflow effects caused by diesel engines.

In this study, when Butyl ether, a type of diether-based oxygenated fuel, is mixed in each volume ratio in a naturally aspirated direct injection diesel engine, the exhaust gas emission characteristics of the oxygenated component in the fuel affect each operating area of the engine I wanted to investigate the effect on. For comparative measurement of engine performance and exhaust emissions, commercial diesel and butyl ether mixed fuels were classified into 4 types according to the mixing ratio and tested. As the content of butyl ether in fuel increases, soot emission reduction increases, and when the maximum mixing amount of butyl ether (diesel 80vol-% + BE 20vol%) is applied, compared to the case of using only diesel as fuel, at 2500 rpm and no load, 39%, and about 32% of smoke reduction effect at full load was confirmed.

ars using diesel have always had problems with reducing exhaust fumes, and have been studied steadily in this regard. There were studies on the remanufacturing effect of DOC catalyst deactivated by diesel vehicle smoke reduction device, analysis of vehicle fire accident cases caused by damage to diesel vehicle smoke reduction device, and related studies on the remanufacturing effect of diesel vehicle smoke reduction device DPF. This study also developed an optimized system for complete combustion of smoke generated by institutions using diesel engines in low-temperature exhaust gases. The main systems to be developed are high-performance heaters, burner structures that can maintain ignition in exhaust flows, and exhaust flow control units that reduce exhaust gas backflow effects caused by diesel engines.

In a steam turbine system for nuclear power plant, the exhaust loss consists of leaving loss, hood loss, turn-up loss and restriction loss. The exhaust loss during rated power operation of steam turbine equipment is inevitable, but it can be optimized by several factors such as last stage blade length, condenser vacuum and steam velocity. In this paper the relationship between the exhaust loss and electrical output of domestic nuclear power plants was quantitatively evaluated, and ways to reduce this loss were considered.

Cars using diesel have always had problems with reducing exhaust fumes, and have been studied steadily in this regard. There were studies on the remanufacturing effect of DOC catalyst deactivated by diesel vehicle smoke reduction device, analysis of vehicle fire accident cases caused by damage to diesel vehicle smoke reduction device, and related studies on the remanufacturing effect of diesel vehicle smoke reduction device DPF. This study also developed a burner system in a smoke reduction device suitable for exhaust engines to completely burn smoke generated by institutions using diesel engines in low-temperature exhaust gases. The main systems to be developed are high-performance heaters, burner structures that can maintain ignition in exhaust flows, and exhaust flow control units that reduce exhaust gas backflow effects caused by diesel engines.

Cars using diesel have always had problems with reducing exhaust fumes, and have been studied steadily in this regard. There were studies on the remanufacturing effect of DOC catalyst deactivated by diesel vehicle smoke reduction device, analysis of vehicle fire accident cases caused by damage to diesel vehicle smoke reduction device, and related studies on the remanufacturing effect of diesel vehicle smoke reduction device DPF. This study is also to develop a burner structure in a smoke reduction device suitable for an exhaust engine to completely burn smoke generated by an engine using a diesel engine in a low-temperature exhaust gas. The main systems to be developed are high-performance heaters, burner structures that can maintain ignition in exhaust flows, and exhaust flow control units that reduce exhaust gas backflow effects caused by diesel engines.

Recently, Regulations on ships exhaust gas are being strengthened. Nations around the world are trying to various efforts in many aspects to decrease ship emission gas. As part of these efforts, the shipping industry is working towards establishing green system that reduce the emission gas emitted in port. In this study we measured exhaust emission gases such as by fuel change using A-Ra Training Ship in Port. When sailing, we found that was 3.6% to 6.6% higher when using LRFO compared to using MGO, and during departure and arrival, the load changes were significant. As a result, was on average 29.8% higher and was 42% higher during departure, while was on average 19.5% higher and was 17.4% higher during arrival, with almost no difference in the other components.

선박용 엔진에서 배출되는 배기가스에는 다량의 수분과 미세먼지를 포함하고 있다. 미세먼지에는 여과성 미세먼지와 배기 배 출 후 액상으로 변화하는 응축성 미세먼지가 포함되어 있으며 배출 전에 걸러지는 고체상 미세먼지보다 응축성 미세먼지가 더 많은 것으 로 보고되고 있다. 본 연구에서는 배기가스의 배기열과 수분을 회수하고 응축성 미세먼지를 제거하기 위한 실험장치를 실험실 내의 가스 보일러 배기가스를 이용하여 테스트 하였다. 배기가스는 1차적으로 냉각방식으로 수분과 응축성 미세먼지가 제거되고 2차적으로 흡수제 방식에 의해 추가적으로 수분이 제거되었다. 상대습도 측정에 의한 배기가스 수분 제거율을 계산하면 1단계 배기냉각 방식으로 73%, 2단 계 흡수제 방식으로 90% 제거되는 것으로 측정되었다. 이 과정에서 응축성 미세먼지는 80~90% 제거되는 것으로 측정되었다. 개발 시스템 에 의해 회수된 열은 공정열로 활용할 수 있으며, 회수된 물은 수처리 과정을 통해 공정수로 활용할 수 있다. 또한 현재 관리 규제가 되고 있지 않지만 미세먼지의 주요 원인인 응축성 미세먼지를 효과적으로 제거할 수 있을 것으로 기대된다.