This study aims to develop a detailed sizing system for lower body clothing for elderly obese women, using data from the 8th Korean Anthropometric Survey. The research targets 296 elderly women aged 60 to 85, selected from 805 participants in total, who meet the following criteria: Rohrer Index of 1.6 or above, Body Mass Index of 25 or higher, and Waist-Hip Ratio of 0.85 or greater. Elderly women with abdominal obesity exhibit shorter lower body proportions and greater fat accumulation in the torso, around the chest and waist. The findings show that women in their 60s have the highest level of obesity, while waist width and thickness are greatest in women in their 70s, suggesting that abdominal obesity increases with age. According to the KS standards, the main measurement categories were divided into 5cm increments for height, while waist and hip girth were categorized into 5cm and 3cm, respectively, to analyze the distribution of sections. Clothing size standards for lower garments that require a precise fit, such as skirts and formal pants, are presented in 13 sizes, corresponding to a waist girth range of 85–100cm and a hip girth range of 88–97cm. Detailed measurements are categorized into primary and reference areas. Additionally, sizes were presented differently based on whether a precise fit was necessary. For items that did not require a precise fit, ranges were indicated with letters, or ranges were indicated with measurements. Detailed sizes were categorized into primary and reference areas.

This study aims to develop a fitted torso pattern suitable for males in their forties and fifties who are obese—a group that accounts for more than fifty percent of men in this age group—using a 3D virtual fitting program. Size Korea’s 2022 data for obese males in their forties and fifties is utilized for this study. In terms of the research method, a 3D program (CLO 3D) is used to implement the target group’s various body types and to apply fitted torsos that enable verification and evaluation of the pattern’s fit and ease. The characteristics of fitted torso patterns for obese bodies are as follows: the front centerline is a profile line; shoulder darts are added by reflecting waist-abdominal protrusion in the front panel; and shoulder, arm, waist, and center-back darts are constructed for the back panel. For obese bodies, the minimum circumference ease amounts should be approximately 6–7cm for the chest, 6cm for the waist, and 6–7cm for the hips. Based on an evaluation of the virtual fit of the developed fitted torso pattern, the data shows that a pattern (foundation) such as this is well suited for obese body types with an average of 4.67/5 points for reverse triangular obesity, an average of 6.67/7 points for log obesity, and an average of 6.69 points for the ease amount.

This study aims to develop a life-friendly, wrap-one-piece style dance sports practice wear considering the physical characteristics of middle-aged, abdominally obese women. These types of practice wear allow people to enjoy exercise easily and to wear these garments as daily wear while meeting the requirements for dance sports wear. The three participants selected for this study were all women with five or more years of dance sports experience and were all average sized on Korea’s abdominal obesity scale. In the first phase of the study, practice wear was created in a total of nine styles with three different styles of neckline depths for three different styles of dress skirt lengths. In the second phase of the study, the practice wear was created in 15 styles with five different styles of sleeve lengths for three different styles of waistline heights. After analyzing the design preferences of the participants, the fit preferences of the designs were evaluated and the final appearance was analyzed in order to suggest a pattern. The results of the subjects’ first and second preference evaluations showed a preference for a 10 centimeter neckline depth, for high waistlines, and for elbow to wrist-length sleeves. The implementation of this research is expected to be extensive, as its results can be used as basic data for making lifestyle dance sports practice wear that covers the physical insecurities of middleaged, abdominally obese women and enables them to enjoy their leisure time.

The aim of this study to provide basic reference data for the development of video contents used in pattern drafting education and to explore the possibility of utilizing YouTube videos in such education. Subject videos were selected using the number of views. A total of 596 videos and 28 channels were analyzed for the period July to September 2019 and the results are as follows. With regard to content, there were 27 pattern drafting items, the majority being dress, pants, skirt, blouse and sleeve drafting, although high-level content such as cowl, bustier, corset patterns were also available. Therefore, there is a high likelihood that YouTube videos could be used as educational material, especially as supplementary references to provide specific examples and easy explanations for difficult concepts or method, for students majoring in this field. However, as most videos currently focus on a few items, expanding video content to features a wider variety of clothing items at different levels is necessary. With regard to video length, it mostly ranged from 10 to 15 minutes. It is not advisable to create lengthy lecture-style videos expounding on different principles or variations in pattern drafting when developing educational video material.

PURPOSES: This study develops various models that can estimate the pattern of road surface temperature changes using machine learning methods. METHODS : Both a thermal mapping system and weather forecast information were employed in order to collect data for developing the models. In previous studies, the authors defined road surface temperature data as a response, while vehicular ambient temperature, air temperature, and humidity were considered as predictors. In this research, two additional factors-road type and weather forecasts-were considered for the estimation of the road surface temperature change pattern. Finally, a total of six models for estimating the pattern of road surface temperature changes were developed using the MATLAB program, which provides the classification learner as a machine learning tool. RESULTS: Model 5 was considered the most superior owing to its high accuracy. It was seen that the accuracy of the model could increase when weather forecasts (e.g., Sky Status) were applied. A comparison between Models 4 and 5 showed that the influence of humidity on road surface temperature changes is negligible. CONCLUSIONS: Even though Models 4, 5, and 6 demonstrated the same performance in terms of average absolute error (AAE), Model 5 can be considered the optimal one from the point of view of accuracy.

The purpose of this study is to identify women (aged from 49~59), who have recently emerged as consumers, and their clothing preferences, and it suggests how to make jackets provide better fit and wearability. The results of the study are as follows. In drafting a pattern for size 66 tailored collar jacket with an X-silhouette, it was made with front waist length measuring B/4+1.5 cm, a back length of B/4+1.3 cm, an armhole depth of B/4, a hip ease of H/4+1.2 cm and a sleeve opening of 34.5 cm, to allow for easy movement. In drafting a size 66 high neck collar jacket, it was made with a front and back waist length measuring B/4+1.5 cm, an armhole depth of B/4, a hip ease of H/4+1.2 cm and a sleeve opening of 35 cm. In drafting a size 66 sports collar jacket with an A-silhouette, it was made with front and back waist lengths measuring B/4+1.5 cm, an armhole depth of B/4, and a side dart of 1.3 cm, to provide raglan sleeves. The last experimental jacket pattern improved the appearance and moving fitness evaluation especially for shoulder and arm movement. Based on analysis, jackets were made and subjected to an appearance evaluation using multi-modules to test the level of wearing satisfaction for each fabric and silhouette. the results of the multi-module wearing tests indicate that the preferred silhouettes caused less stressful situations in terms of both psychological and physiological signals.

There has been an increase of using Bosch Process to fabricate MEMS Device, TSV, Power chip for straight etching profile. Essentially, the interest of TSV technology is rapidly floated, accordingly the demand of Bosch Process is able to hold the prominent position for straight etching of Si or another wafers. Recently, the process to prevent under etching or over etching using EPD equipment is widely used for improvement of mechanical, electrical properties of devices. As an EPD device, the OES is widely used to find accurate end point of etching. However, it is difficult to maintain the light source from view port of chamber because of contamination caused by ion conflict and byproducts in the chamber. In this study, we adapted the SPOES to avoid lose of signal and detect less open ratio under 1 %. We use 12inch Si wafer and execute the through etching 500um of thickness. Furthermore, to get the clear EPD data, we developed an algorithm to only receive the etching part without deposition part. The results showed possible to find End Point of under 1 % of open ratio etching process.

The emergence of pop art in the 1960s exerted a profound impact on integrating art into the real lives of the general public, which continues in the current area of culture of post-industrial society. Thus, this study aims to attempt the popularization and modernization of Korean images by applying the concept of pop art to the development of a national symbolic image. This study utilized Mugunghwa, Taegeukgi, and the Great Seal, which are national symbolic images that establish the identity of Korea through differentiation, universality, and visual formativeness. It then proceeded with the development of neo-pop art motives and patterns using national symbolic images from the standpoint of symbolism, mix-match, and repetitiveness from among the characteristics of neo-pop art. This study carried out pattern design by departmentalizing each characteristic according to the standpoint of neo-pop art through scribbles composed of the following: Signs, pictograms, and childlike characters; drawing simplification for symbolism; a mix of the East and the West; a mix of subfashion and subculture for mix-match; the repetition of lines, characters, and icons; and the exaggeration and grotesqueness of characters and icons for repetitiveness. This study is expected to serve as momentum for raising the cultural value of Korea and for the development of a pattern design capable of achieving worldwide competitiveness through the combination of the permanence and continuity of national symbols with the popular universality of pop art.

The recent fashion market failed to satisfy the needs of female customers in their 30s who are demanding a slim jacket that makes the wearer look young and slim. Accordingly, the slim-fit jackets of domestic brands targeting the women in their 30s were collected to conduct look and movement fitting evaluations based on the standard somatotype, and a slim-fit tailored jacket prototype was developed based on the present findings. This research aims to increase the satisfaction level of the slim-fit jacket customers reflecting a variety of somatotypes of women in their 30s. The research process was developing jacket patterns fully reflecting the properties in terms of extra space and design lines for different somatotypes of women in their 30s based on the jacket pattern formulated through the advanced research, and then suggesting pattern design methods for the different somatotypes. In this sense, this research attempted to identify the problems concerning the slim-fit tailored jacket fitting for different somatotypes of women in their 30s. The main aim was to suggest ways to improve the customers’ satisfaction level regarding the fit, and enable the manufacturers to produce a well-fitting jacket reflecting the peculiarities of each somatotype.

Proper oral hygiene is required to maintain oral health and prevent oral disease. Toothbrushing is central to proper oral hygiene. Mechanical tooth cleaning is the mainstay of plaque control. A variety of toothbrushing techniques have been developed and evaluated for their efficacy. However, these evaluations are subjective. To adequately evaluate toothbrushing objectively, a novel toothbrushing monitoring system was developed. The system involves user-monitored brushing patterns including toothbrush motions using a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetic sensor, one load-cell and Bluetooth devices. To confirm the efficacy of this toothbrushing monitoring system, eight periodontist performed tooth brushing in a dental model, and their brushing motion was monitored and recorded, and evaluated by statistical means. The proposed monitoring system can be used to aid dental care personnel in toothbrushing instruction.

This study aims to develop an English writing model using pattern-based reading materials and to apply it to the elementary classroom. The meaning of “patterns” was searched for in the language learning and teaching methods, and their roles were examined in terms of language acquisition and learning. The writing class was connected to the reading class so that learners could properly model and transfer their forms and meanings of the patterns recognized in the reading class to what they want to write in the writing class. The experiment was conducted on one class of grade 6 elementary school students in which the reading and writing class was integrated into the regular English class during one semester. Six pattern-based reading materials were selected with a range of genres including stories and poems. The effect of the pattern-based reading materials on the writing class was examined through writing test and a questionnaire about the affective domain before and after the experiment. The result showed that writing scores were increased significantly in all the leveled-group learners. As for the affective domain, interest, participation, confidence, and adventure each had a significantly increased score. The sense of adventure increased the most. This is considered attributable to the feedback which ignored grammatically trivial errors and focused on how to properly express the contents learners wanted to write.

톱다리개미허리노린재[Riptortus pedestris (Fabricius) (Hemiptera: Alydidae)]는 콩에서 중요한 난방제 해충이다. 톱다리개미허리노린재와 두 종의 알기생벌의 계절적 발생 패턴을 기주 식물과 연관하여 고찰하였다. 또한 천적 상호간의 상대적 발생 패턴의 차이와 이유를 분석하고 톱다리개미허리노린재의 기주 식물에 대한 적합도 검증 결과를 바탕으로 톱다리개미허리노린재의 관리 전략을 제시하였다. 톱다리개미허리노린재의 효과적인 관리를 위해서 저항성품종의 사용, 과수의 경우 주변 작물에서 콩을 배제하는 것, 기주알 공급을 통한 보존적 생물적 방제, 살충제 사용 시기의 조절 등이 고려되어야 한다.

그라비어 오프셋 인쇄법의 장점을 보완하기 위해서 폴리머 다이렉트 그라비어 인쇄법을 이용하여 터치패널용 미세 전극 패턴형성에 대해서 검토하였다. 분자량이 서로 다른 2종류의 epoxy binder와 3종류의 silver powder 및 carbon powder를 이용하여 Ag paste를 제조하여 전극패턴 형성 및 이에 물성을 검토하였다. 그 결과 flake/spherical hybrid 및 고분자량의 epoxy binder로 제조한 Ag paste가 접착력과 전도성이 더 우수함을 알 수 있었다. 30/30㎛을 구현하기 위해서는 TI치가 3.6정도가 적합함을 알 수 있었다. 결론적으로 롤투롤 인쇄법인 폴리머 다이렉트 그라비어 인쇄법으로 30/30㎛ 전극패턴 형성이 가능함을 알 수 있었다.

For a good design, it is important to understand consumers and trend of textile and fashion design. Previous researches on textile pattern design with CAD have been done. They have studied on Korean traditional floral motives/hand painting or some geometric patterns. Few studies have been done on conversational design. Therefore the purpose of study was to observe types of textile pattern design for the recent fiver years and determine fabric pattern trends, especially on the conversational motifs. The types of patterns were analysed with professional panels from the 2005～2009 collection sources, using SPSS program. This study was also develop textile patterns creating using CAD. We conducted design process on motif creating, repeat, and mapping jobs, using textile special design program Prima vision and Photoshop CS3.

The aim of this study was to develop a KDPS (Korean dietary pattern score) to assess dietary patterns and diet quality of Koreans from a food culture perspective. The KDPS was applied to dietary data collected during the Korean National Health and Nutrition Examination Survey of 2007, and the validity and reliability of the KDPS were evaluated. The targets of the study included 2,278 Korean adults aged 20n89 years. The KDPS was developed using the sum of the scores of 13 components. Each component scored up to 10 points and there was a total of 130 points. The first seven components were for the KSMS (Korean-style meal score) and assessed the dietary balance based on the 3-Chup Bansang daily basic table setting. The components numbered 8 to 13 were for the FGS (food group score), which measured the degree of compliance with the six major food groups based on the Korean recommendation for one serving size of grains, meats, vegetables, fruits, milk, and oils. This KDPS was verified through content validity, concurrent-criterion validity, principal components analysis, and a reliability analysis. The results showed that content validity and construct validity were high. The KDPS developed in this study adhered to the Korean dietary pattern and a healthy diet intake. Furthermore, this study presented an integrated index by scoring the Korean style table setting in addition to evaluating meals from a nutrition perspective. This study can be extended to develop a score for assessing.

The research developes short-run standardized control charts(SSCC) and short-run acceptance control charts(SACC) under the various demand patterns. The demand patterns considered in this paper are three types such as high-variety and repetitive low-volume pattern, extremely-high-variety and nonrepetitive low-volume pattern, and high-variety and extremely-low-volume pattern. The short-run standardized control charts developed by extending the long-run x-R, x-s and I-MR charts have strengths for practioners to understand and use easily. Moreover, the short-range acceptance control charts developed in the study can be efficiently used through combining the functions of the inspection and control chart. The weighting schemes such as Shewhart, moving average (MA) and exponentially weighted moving average (EWMA) can be considered by the reliability of data sets. The two types according to the use of control chart are presented in the short-range standardized charts and acceptance control charts. Finally, process capability index(PCI) and process performance index(PPI) classified by the demand patterns are presented.