Most Korean companies in the fashion industry are SMEs, and the role of the CEO and management ownership is important for enhancing the firm’s competence and developing strategies. The study aims to examine the effect of management ownership on company financial growth. In particular, the study focuses on the moderating effect of company age and size on Korean fashion SMEs’ financial outcomes. Financial data based on company financial statements from 2012 to 2014 was collected by the Data Analysis, Retrieval and Transfer System of Korea’s Financial Supervisory Service. A total of 295 companies’ (domestic fashion businesses) data was analyzed by the bootstrap method. The median sales value in the financial year 2014 was 47,492,403,958 KRW, and the company size was divided by it. The companies were in business for an average of 20 years. According to the results, the management ownership had a negative effect on Compound Annual Growth Rate (CAGR) for the three-years, and the relationship between the two variables was moderated by company age. Additionally, the interaction effect of management ownership and company age on 3-CAGR was also moderated by company size. When the companies had spent only a few years in business, a negative effect of management ownership for small firms and a positive effect of management ownership on financial growth for medium firms were found. These results suggest that small companies starting business need to manage their company governance structure to make flexible decisions, and after retaining financial growth, the companies can expand their businesses based on strong ownership.

The ductile-brittle transition behavior of two austenitic Fe-18Cr-10Mn-N-C alloys with different grain sizes was investigated in this study. The alloys exhibited a ductile-brittle transition behavior because of an unusual brittle fracture at low temperatures unlike conventional austenitic alloys. The alloy specimens with a smaller grain size had a higher yield and tensile strengths than those with a larger grain size due to grain refinement strengthening. However, a decrease in the grain size deteriorated the low-temperature toughness by increasing the ductile-brittle transition temperature because nitrogen or carbon could enhance the effectiveness of the grain boundaries to overcome the thermal energy. It could be explained by the temperature dependence of the yield stress based on low-temperature tensile tests. In order to improve both the strength and toughness of austenitic Fe-Cr-Mn-N-C alloys with different chemical compositions and grain sizes, more systematic studies are required to understand the effect of the grain size on the mechanical properties in relation to the temperature sensitivity of yield and fracture stresses.

In general, the larvae of Protaetia brevitarsis is raised on fermented oakwood sawdust. Many attempts have been to changes components sawdust, such as using other tree instead of oakwood or adding another material. Like this some study exists, about 'component' of sawdust, however little is known of relation between larval growth and quality of sawdust. The phenomenon-big particle size sawdust flows up on excrement from the larvae-is occurring in used sawdust for raising the larvae. This study was conducted to observe the larvae and adult of Protaetia brevitarsis act according to each sawdust particle size. We conducted choice experiments with Protaetia brevitarsis, which were offered sawdust differing in particle size. Females preferred to lay their eggs on the fine particle sawdust. Also in the case of larvae, the more fine sawdust particle has the more high level of preference, and so is hatchability. Especially larvae tend to be slanted toward finer sawdust. Growth rate of the larvae was shown the highest level in the finest sawdust just as others do. These results show that fine sawdust particle size is advantage for larval development and oviposition.

본 실험은 초고압과 입자도 차이에 따른 더덕의 외피와 육질의 항산화 활성을 비교 진행하였다. 외피의 경우 입자도 크기에 따른 항산화 활성의 유의 차가 나타나지 않았지만, 육질의 경우에는 입자도 크기에 따른 항산화 활성의 유의 차가 나타났다. 초고압 하에서 실시한 더덕 외피에서는 입자도간 항산화 활성의 유의차가 나타나지 않았다. 반면 육질에서는 초고압 처리한 압력에 따라 또한 측정한 항산화 성분에 따라 입자도 간에 유의차가 나타났다. 이와 같은 현상은 시료를 구성하는 물질이 서로 다른 경도를 지니고 있어서 내부저항에 차이가 생기는 것에 기인하며 초고압 처리가 내부저항에 작용하는 정도에 따라 기인되었을 것으로 추론한다. 이 같은 결과로 더덕을 외피와 육질을 분리하지 않은 채 입자도 영향을 분석할 경우 입자의 크기가 큰 영역에 항산화도가 높은 외피가 많이 분포되어 오히려 항산화도가 높음을 관찰하였다.

건강기능성 물질을 함유하며 고유의 색과 향미를 가지는 유색감자 홍영 분말을 첨가한 반죽 및 면의 물리화학적 특성을 확인하였다. 홍영 미세 분말은 ball-milling을 통하여 제조하였으며, 매우 낮은 입자도로 인하여 감자의 세포 및 전분 구조가 파괴되어 손상 전분의 함량이 높았다. 이 같은 손상 전분은 낮은 온도에서 물을 흡수하고 팽창하는 성질이 높아 일반 분쇄를 통하여 얻은 분말로 제조한 반죽에 비하여 BM 분말을 반죽에 첨가하였을 때 탄성이 높고 자유수가 적은 반죽 및 면이 제조되었다. 입자 크기를 달리하여 분쇄한 홍영 분말의 경우 손상 전분이 아닌 첨가 분말의 표면적에 의하여 영향을 받으므로 입자 크기가 클수록 반죽 내의 자유수가 많아 열처리 시 더 많은 호화가 발생하였다. 홍영 분말을 첨가한 경우 홍영 특유의 붉은색이 증가함을 확인하였으며, 홍영 분말의 입자 크기가 커질수록 적색도가 감소하였다. 홍영 분말의 다양한 입자 크기에 따라 손상 전분의 발생 및 입자의 표면적에 의하여 서로 다른 호화 특성 및 면 반죽의 조직감을 나타내었다. 본 연구 결과를 통하여 미세 분말(BM)의 경우 손상 전분으로 인하여 생반죽의 탄성이 밀가루에 비하여 매우 높아 성형에 더 많은 힘이 필요함을 확인할 수 있었다. 따라서 미세 분말인 BM 분말과 다르게 생반죽의 성형이 용이하면서 홍영 특유의 붉은 색을 가장 잘 나타내며, 조리 이후 반죽의 탄성을 향상시키고 밀가루와 인장력에 유의차가 나타나지 않는 R1 및 R2 분말로 제조한 면이 우수한 품질을 나타냄을 확인하였다. 본 연구 결과는 전분을 함유하는 대체 분말을 이용한 제면 제품의 개발 시 입자 크기의 결정에 대한 기반이 될 수 있을 것으로 사료된다.

Ceramics biomaterials are useful as implant materials in orthopedic surgery. In this study, porous HA(hydroxyapatite)/β-TCP(tricalcium phosphate) composite biomaterials were successfully fabricated using HA/β-TCP powders with 10-30 wt% NH4HCO3 as a space holder(SH) and TiH2 as a foaming agent, and MgO powder as a binder. The HA/β-TCP powders were consolidated by spark plasma sintering(SPS) process at 1000 oC under 20 MPa conditions. The effect of SH content on the pore size and distribution of the HA/β-TCP composite was observed by scanning electron microscopy(SEM) and a microfocus X-ray computer tomography system(SMX-225CT). These microstructure observations revealed that the volume fraction of the pores increased with increasing SH content. The pore size of the HA/β-TCP composites is about 400-500 μm. The relative density of the porous HA/β-TCP composite increased with decreasing SH content. The porous HA/β-TCP composite fabricated with 30%SH exhibited an elastic modulus similar to that of cortical bone; however, the compression strength of this composite is higher than that of cortical bone.

The milling characteristics of rice using different milling methods (dry and wet) were investigated. Generally, average particle sizes of dry-milling flours were bigger than those of wet-milling flours due to low moisture content. Three theoretical models for milling, such as the Rittinger, Kick, and Bond model, were applied to characterize the milling process of rice. The wet-milling method showed higher value milling constants including Bond’s work index. Baeksulgi was used to study the effect of the milling method and particle size on rice flour’s physicochemical property (water content, color value, and texture). Moisture content and hardness of Baeksulgi were smaller as the particle size became smaller. L value of Baeksulgi was greater as the particle size became smaller. The energy requirement for the milling of grains to obtain a suitable size of particles was estimated by the grinding models. The results of our study might provide a systematic way to estimate the energy requirement to obtain a suitable particle size by milling

The purpose of this study was to investigate the microstructures and mechanical properties of zirconia toughened alumina (ZTA) ceramics prepared from two kinds of 3Y-TZP powders. ZTA composites were prepared by adding two kinds of 3Y-TZP powders, 3YEH (BET = 7m2/g) and 3YEM (BET = 16m2/g), to α-alumina in the range of 5-25 wt%. It was found that the microstructure photographs of the ZTA composites showed that the average grain size of alumina decreased as the content of zirconia increased. In our present study, specimens containing 3YEM zirconia exhibited smaller grain sizes compared to those of 3YEH zirconia. The Vickers hardness of the ZTA composites that were sintered at 1600˚C for 2 hrs was found to smoothly decrease with increasing zirconia content because of the low Young modulus in zirconia. The Vickers hardness of the ZTA containing 3YEH zirconia was greater than that of the 3YEM zirconia. In substance, the fracture toughness (K1c) of the ZTA composites increased as the content of zirconia increased. The fracture toughness (K1c) of ZTA containing 3YEM zirconia was greater than that of 3YEH zirconia.

RBSC (reaction-bonded silicon carbide) represents a family of composite ceramics processed by infiltrating with molten silicon into a skeleton of SiC particles and carbon in order to fabricate a fully dense body of silicon carbide. RBSC has been commercially used and widely studied for many years, because of its advantages, such as relatively low temperature for fabrication and easier to form components with near-net-shape and high relative density, compared with other sintering methods. In this study, RBSC was fabricated with different size of SiC in the raw material. Microstructure, thermal and mechanical properties were characterized with the reaction-sintered samples in order to examine the effect of SiC size on the thermal and mechanical properties of RBSC ceramics. Especially, phase volume fraction of each component phase, such as Si, SiC, and C, was evaluated by using an image analyzer. The relationship between microstructures and physical properties was also discussed.

분화용 나팔나리의 구근 크기, 저온처리 및 입실 시기 에 따른 개화 반응을 연구하였다. 국내 육성 분화용 나 팔나리 ‘White Eve’와 ‘White LoSong’의 구근을 대상으 로 구근의 크기가 18~20cm 일 때 화수가 3개 이상이며 초장은 30cm 정도 였으며, 개화소요일 수는 138일 내외 로 소요되었다. 한편 국내 육성 분화용 나팔나리 ‘Charm’ 의 저온처리에 따른 개화용 구근의 휴면타파 시험 결과, 2주간 15oC에서 예냉 후에 6주간 4oC에서 저온 처리 후 15oC 온실에 정식하면 개화율이 100%였고, 정식 후 개 화소요일은 135일이었고, 개화수는 6개 이상으로 양호하 였으며, 초장도 30cm 이하로 상업적 분화용으로 적절하 였다. 분화용 나팔나리 ‘White Eve’를 대상으로 11월 15일, 12월 1일과 12월 15일의 정식시기에 따른 개화시 기는 야간 처리온도가 15oC일 경우 10oC보다 10 ~ 20일 정도 빨랐고, 정식시기가 늦을 수록 개화시기가 빨라서 15oC에 12월 15일 정식은 115일이 소요되어 4월 초에 개화되었다. 나팔나리 구근의 크기 18 ~ 20cm를 2주간 15oC에서 예냉 후에 6주간 4oC에서 저온처리 후 15oC 온실에 정식하면 우수한 분화 생산이 가능하다.

This study is focused on investigating the relation between the particle size of silver flake powder and mechanical milling parameters. Mechanical milling parameters such as ball size, impeller rotation speed and milling time of the attrition ball-mill were controlled to produce silver flake powder. The particle size of the silver flake powder increased with increasing ball size and impeller rotation speed. The change of the particle size of the silver flake powder with mechanical milling parameters was analyzed based on balls motion in the mill container of the attrition ball-mill. The silver flake particles were formed at the elastic deformation area of the ball due to the collision between balls. The change of the particle size of the silver flake powder with mechanical milling parameters well consists with the change of the collision energy of ball with parameters mentioned above.

약용식물을 플러그 트레이를 이용하여 공정육묘를 한 연구결과는 거의 없는 실정이다. 세 종류 약용식 물 묘의 생산을 위한 기준을 마련하기 위해 플러그셀 크기가 플러그묘의 생장에 미치는 영향을 구명하기 위하여 본 연구를 수행하였다. 상업용 상토가 들어있는 128, 200, 288구 플러그셀 트레이에 종자를 파종하였다. 세 종류 약용식물은 플러그 셀 크기가 커질수록 생육이 우수하였다. 하나의 플러그 트레이에서 얻어진 총 바이오 매스는 차조기와 산두근은 288구에서 가장 높았고, 참당귀는 200구에서 가장 높았다. 총 엽록소와 안토시아닌 함량을 제외한 차조기의 지상부와 지하부 생장은 128구에서 가장 우수하였다. 하지만 최대근장, 엽장, 엽폭, 엽 면적, 절간장, 뿌리 생체중, 근군형성은 200구와 288구에서 유의한 차이가 없었다. 산두근은 최대근장, 경경, 엽폭, 엽면적, 지상부 생체중, 근군형성을 제외한 모든 생장에서 처리간에 유의한 차이가 없었다. 그러나 최대 근장, 경경, 엽폭, 엽면적, 지상부 생체중, 근군형성은 128구에서 가장 우수하였다. 엽록소 함량을 제외한 참당 귀의 지상부와 지하부의 모든 생장이 128구에서 우수하였다. 경제적인 부분과 총 바이오매스를 고려했을 때 차조기와 산두근은 288구에서 육묘하는 것이 좋고, 참당귀는 200구에서 육묘하는 것을 권장한다.

The Purpose of this study is to empirically examine the impact of various internal and external innovation activities of SMEs on their innovation performances in the field of electronics and communication industry. Drawing upon the literature review, internal and external innovation activities are defined and conceptualized, and independent, dependent and moderator variables are developed. We have used survey-based data for this study from the survey of technology innovation activities in manufacturing industry, which was conducted by the Science and Technology Policy Institute (STEPI) in 2010. The main result of this study shows that there were no significant differences in the impact of innovation activities on market performance according to the size of SMEs. On the other hands, we found that there were significant differences in the impact of innovation activities on technological innovation performance according to the size of SMEs. Therefore, in order to make high technological innovation performance, companies in the field of electronics and communication industry need to properly implement the internal and external innovation activities by considering their size.

Titanium and its alloys are useful for implant materials. In this study, porous Ti-Nb-Zr biomaterials were successfully synthesized by powder metallurgy using a NH4HCO3 as space holder and TiH2 as foaming agent. Consolidation of powder was accomplished by spark plasma sintering process(SPS) at 850˚C under 30 MPa condition. The effect of high energy milling time on pore size and distribution in Ti-Nb-Zr alloys with space holder(NH4HCO3) was investigated by optical microscope(OM), scanning electron microscope(SEM) & energy dispersive spectroscopy(EDS) and X-ray diffraction(XRD). Microstructure observation revealed that, a lot of pores were uniformly distributed in the Ti-Nb-Zr alloys as size of about 30-100μm using mixed powder and milled powders. In addition, the pore ratio was found to be about 5-20% by image analysis, using an image analyzer(Image Pro Plus). Furthermore, the physical properties of specimens were improved with increasing milling time as results of hardness, relative density, compressive strength and Young's modulus. Particularly Young's modulus of the sintered alloy using 4h milled powder reached 52 GPa which is similar to bone elastic modulus.

Fe-Cr-Al powder porous metal was manufactured by using new electro-spray process. First, ultra-finefecralloy powders were produced by using the submerged electric wire explosion process. Evenly distributed colloid(0.05~0.5% powders) was dispersed on Polyurethane foam through the electro-spray process. And then degreasing andsintering processes were conduced. In order to examine the effect of cell size (200 µm, 450 µm, 500 µm) in process,pre-samples were sintered for two hours at temperature of 1450˚C, in H₂ atmospheres. A 24-hour thermo gravimetricanalysis test was conducted at 1000˚C in a 79% N₂ + 21% O₂ to investigate the high temperature oxidation behavior ofpowder porous metal. The results of the high temperature oxidation tests showed that oxidation resistance increased withincreasing cell size. In the 200 µm porous metal with a thinner strut and larger specific surface area, the depletion ofthe stabilizing elements such as Al and Cr occurred more quickly during the high-temperature oxidation compared withthe 450, 500 µm porous metals.

In this study, we fabricated Nd2Fe14B hard magnetic powders with various sizes via spray drying combined with reduction-diffusion process. Spray drying is widely used to produce nearly spherical particles that are relatively homogeneous. Thus, the precursor particles were prepared by spray drying using the aqueous solution containing Nd salts, Fe salts and boric acid with the target stoichiometric composition of Nd2Fe14B. The mean particle sizes of the spray-dried powders are in the range from one to seven micrometer, which are adjusted by controlling the concentra- tions of precursor solutions. After debinding the as-prepared precursor particles, ball milling was also conducted to con- trol the particle sizes of Nd-Fe-B oxide powders. The resulting particles with different sizes were subjected to subsequent treatments including hydrogen reduction, Ca reduction and washing for CaO removal. The size effect of Nd-Fe-B oxide particles on the formation of Nd2Fe14B phase and magnetic properties was investigated.

In this study, by using nickel chloride solution as a raw material, a nano-sized nickel oxide powder with an average particle size below 50 nm was produced by spray pyrolysis reaction. A spray pyrolysis system was specially designed and built for this study. The influence of nozzle tip size on the properties of the produced powder was examined. When the nozzle tip size was 1 mm, the particle size distribution was more uniform than when other nozzle tip sizes were used and the average particle size of the powder was about 15 nm. When the nozzle tip size increases to 2 mm, the average particle size increases to roughly 20 nm, and the particle size distribution becomes more uneven. When the tip size increases to 3 mm, particles with an average size of 25 nm and equal to or less than 10 nm coexist and the particle size distribution becomes much more uneven. When the tip size increases to 5 mm, large particles with average size of 50 nm partially exist, mostly consisting of minute particles with average sizes in the range of 15~25 nm. When the tip size increases from 1 mm to 2 mm, the XRD peak intensities greatly increase while the specific surface area decreases. When the tip size increases to 3 mm, the XRD peak intensities decrease while the specific surface area increases. When the tip size increases to 5 mm, the XRD peak intensities increase again while the specific surface area decreases.

Fly ash is one of the aluminosilicate sources used for the synthesis of geopolymers. The particle size distribution of fly ash and the content of unburned carbon residue are known to affect the compressive strength of geopolymers. In this study, the effects of particle size and unburned carbon content of fly ash on the compressive strength of geopolymers have been studied over a compositional range in geopolymer gels. Unburned carbon was effectively separated in the -46μm fraction using an air classifier and the fixed carbon content declined from 3.04 wt% to 0.06 wt%. The mean particle size (d50) decreased from 22.17μm to 10.79μm. Size separation of fly ash by air classification resulted in reduced particle size and carbon residue content with a collateral increase in reactivity with alkali activators. Geopolymers produced from carbon-free ash, which was separated by air classification, developed up to 50 % higher compressive strength compared to geopolymers synthesized from raw ash. It was presumed that porous carbon particles hinder geopolymerization by trapping vitreous spheres in the pores of carbon particles and allowing them to remain intact in spite of alkaline attack. The microstructure of the geopolymers did not vary considerably with compressive strength, but the highest connectivity of the geopolymer gel network was achieved when the Si/Al ratio of the geopolymer gel was 5.0.

최근 신선 유통되는 퉁퉁마디는 식물 체내 수분 함량이 높고 조직이 단단하지 못해 저장성이 낮은 식물로 MA 저장을 통해 저장성을 향상시키고, 최근 새롭게 개발된 비천공 breathable(NPB) 필름을 적용하여 각기 5℃와 10℃로 저장하여 실제 유통 수준에서의 영향을 알아 보았다. 또한 신선 편이 제품으로의 유통 가능성을 알아보기 위하여 3cm, 5cm, 그리고 10cm로 각각 절단하여 저장성을 상호 비교하였다. 그 결과 10℃에 비하여 5℃ 저장 조건이 NPB 필름을 적용 하였을 경우 저장력이 우수한 결과를 보였는데 저장중 생체중의 감소율은 5℃에서 25일 저장 종료일까지 2% 이내의 결과를 보였고 10℃에서는 저장 15일 후에 100,000cc NPB 필름을 제외하고 2% 이내의 감소율을 나타내었다. 5℃와 동일 기간인 15일을 기준으로 비교하면 5℃가 1% 이내의 감소율을 나타내 상대적으로 우수한 결과를 보였다. 동일기간 동안 측정한 이산화탄소와 산소 농도의 변화에서는 5,000cc NPB 필름이 MA 저장시의 특징을 보였다. 저장중 포장내 에틸렌 농도는 진공 필름에서 NPB 필름처리들보다 10~100배까지 높았으나, 크기별 차이에 통계적 유의성은 없었다. 각기 5℃에서 25일간 그리고 10℃에서 15일간 저장한 이후 항산화 활성을 측정, 상호 비교한 결과 5℃가 10℃보다 두배 이상의 항산화 활성도를 나타내었고 100,000cc NPB 필름에서 높은 활성도를 보였고 크기별로는 10cm 크기가 활성도가 낮아지지 않는 것으로 나타났다. 저장 종료후 관능검사를 통한 외관품질과 이취를 평가한 결과 5℃ 처리와 5,000cc 필름을 적용한 구에서 상대적으로 높은 수준으로 나타났다. 본 실험을 통하여 5℃, 저장시 5,000cc NPB 필름을 MA 저장에 적용하는 것이 타당하다는 결과를 얻을 수 있었다. 다만 실제 유통 현장에서 사용되는 온도조건이 10℃임을 고려하면 10℃ 저장 시 10cm 크기에는 100,000cc NPB 필름이 단기유통이라는 측면에서 적용이 가능할 것 으로 판단되었다.

벼 다단선반육묘 시 건모 육성과 벼 육묘 후 다단육묘선반의 활용도를 높일 수 있는 다단육묘선반을 제작하기 위한 기초자료를 얻고, 간이다단육묘선반을 설치하여 육묘하는 농가의 건모 육묘를 위한 자료로 제공하고자 길이 215 cm, 폭95/125 cm에 각각 높이 35, 50, 65 cm의 다단육묘선반을 제작하여 기존 앞마당육묘기/편안육묘기(길이 122, 폭 62, 단높이 20/30 cm)와 대비하여 실시하였던. 시험연구 결과를 요약하면 다음과 같다 1. 다단육묘선반의 길이와 폭은 묘소질에 큰 영향이 없었으나 단간격은 높이가 높을수록 초장이 짧고, 엽수가 많았으며,건물중 및 모충실도가 높았고, 비정상모의 발생이 적었다. 2. 초장은 다단선반의 단높이가 높을수록 짧았고, 제작한 선반은 앞마당육묘기와는 파종후 20일 및 30일 다같이 모든 단높이에서, 편안육묘기와는 파종후 20일에는 단높이 50 cm 및65 cm, 파종후 30일에는 단높이 65 cm에서 유의차가 있었다. 3. 엽수는 파종후 20일 3.08 ~ 3.44매, 30일 3.37 ~ 3.87매로선반 간에 큰 차이는 없었으나, 선반높이가 높을수록 엽수가많은 경향이었고, 제작한 선반은 파종후 20일에는 단높이65 cm, 파종후 30일에는 선반의 길이 125 cm에 단높이 35 cm외는 모두 앞마당육묘기와 편안육묘기와 유의차가 있었다. 4. 건물중은 파종 후 20일 및 30일 100본당 각각 859 ~1,003 mg, 1,247 ~ 1,531 mg으로 선반의 단높이가 높을수록 높았고, 각 시기 다같이 앞마당육묘기와 편안육묘기와 유의차가있었다. 같은 단높이라도 폭 95 cm가 125 cm에 비하여 건물중이 높았고 유의차도 있었다. 5. 모충실도(mg/cm)는 파종 후 20일 0.71 ~ 1.04, 30일0.82 ~ 1.15로 다단선반의 폭과 길이는 별 영향이 없는 것으로나타났으나 선반간격은 단높이가 높을수록 높았고, 제작선반은 앞마당육묘기와 편안육묘기에 비하여 모충실도가 높고 유의차도 있었다. 6. 비정상모 발생은 파종 후 20일 0.2 ~ 3.0%, 30일 0.8 ~6.0%로 단높이가 높을수록 적었다. 제작선반은 앞마당육묘기와 편안육묘기에 비하여 비정상모 발생율이 파종후 20일0.9 ~ 2.8%, 30일 1 ~ 5.2% 적었으며 유의차도 있었다. 특히 선반 폭 95 cm에 단높이 65 cm의 비정상모 발생은 파종 후30일까지 1%미만이었다. 7. 제작 조립식다단육묘선반은 제작비는 1,000상자 기준으로앞마당육묘기에 비해서는 4,460 ~ 6,103천원이, 벼 육묘장의 육묘선반에 비해서는 선반 폭 125 cm, 길이 215 cm, 높이 65 cm는 893천원이 적었으나, 선반 폭 95 cm에 높이 50 cm및 65 cm는 각각 750천원, 390천원이 많았다. 파종상자의 재치상 등 비용 포함시 비용은 1,000상자당 기준 다단육묘선반은 앞마당육묘기 및 육묘공장용 선반에 비해 각각5,460 ~ 7,103천원, 250 ~ 1,893천원의 이익이 있는 것으로 예상된다. 이상의 결과로 볼때 건묘 육묘를 위한 다단선반은 폭95 cm, 선반높이 65 cm가 가장 좋았으나, 묘소질과 선반제작비, 편리성 등을 종합적으로 고려해 볼 때 다단선반은 폭95 cm에 선반높이 65 cm, 또는 폭 125 cm에 선반높이 65 cm가 적절한 것으로 보인다.