This study compares and analyzes inorganic components of four different Pu-erh tea species consumed in Korea. The criteria for the inorganic components was based on the Royal Institute of Technology (KTH) recommendations. Out of the 19 general items: potassium, manganese, silicon and fluorine were detected in amounts exceeding the maximum allowable concentration by 5~23, 57~91, 1.6~1.8 and 9~18 times respectively. Out of the 15 potentially harmful elements: aluminum and nickel were exceeded the Maximum allowable concentration by 9~14 times and 0.8~1.2 times respectively. To reduce the concentration of inorganic elements in excess of the maximum allowable concentration, the extraction time of tea should be less than 1 minute in addition to limiting the amount. The amount of Pu-erh tea for extraction was about 0.1 g manganese, about 0.3 g potassium, about 0.5 g fluoride and about 2 g silicon. Therefore, the maximum amount of tea for extraction should be 0.1 g in regards to the safety of Pu-erh tea. Based on the recommended maximum daily intake of inorganic ingredients by the Ministry of Food and Drug Safety, it is desirable that the number of extractions be less than three.

Whisker-type magnesium hydroxide sulfate hydrate (5Mg(OH)2·MgSO4·3H2O, abbreviated 513 MHSH), is used in filler and flame-retardant composites based on its hydrate phase and its ability to undergo endothermic dehydration in fire conditions, respectively. In general, the length of whiskers is determined according to various synthetic conditions in a hydrothermal reaction with high temperature (~180oC). In this work, high-quality 513 MHSH whiskers are synthesized by controlling the concentration of the raw material in ambient conditions without high pressure. Particularly, the concentration of the starting material is closely related to the length, width, and purity of MHSH. In addition, a ceramic-coating system is adopted to enhance the mechanical properties and thermal stability of the MHSH whiskers. The physical properties of the silica-coated MHSH are characterized by an abrasion test, thermogravimetric analysis, and transmission electron microscopy.

A flexible piezoelectric energy harvester(f-PEH) that converts tiny mechanical and vibrational energy resources into electric signals without any restraints is drawing attention as a self-powered source to operate flexible electronic systems. In particular, the nanocomposites-based f-PEHs fabricated by a simple and low-cost spin-coating method show a mechanically stable and high output performance compared to only piezoelectric polymers or perovskite thin films. Here, the non-piezoelectric polymer matrix of the nanocomposite-based f-PEH is replaced by a P(VDF-TrFE) piezoelectric polymer to improve the output performance generated from the f-PEH. The piezoelectric hybrid nanocomposite is produced by distributing the perovskite PZT nanoparticles inside the piezoelectric elastomer; subsequently, the piezoelectric hybrid material is spin-coated onto a thin metal substrate to achieve a nanocomposite-based f-PEH. A fabricated energy device after a two-step poling process shows a maximum output voltage of 9.4 V and a current of 160 nA under repeated mechanical bending. Finite element analysis(FEA) simulation results support the experimental results.

인산염 농도 변화에 따른 Hizikia fusiforme의 무기비소 축적량 및 생장률을 분석하였다. 무기비소에 14일간 노출 하였을 때, 2 mg L-1의 높은 인산염 농도에서 무기비소 축적량이 증가하지 않았다. 하지만 인산염 농도가 0.02 mgL-1로 낮은 경우에 무기비소 축적량이 3배 이상 증가하였다. 또한 H. fusiforme는 인산염 농도가 낮은 경우 생장률이 14.5%, 무기비소 (10 μg L-1)에 노출되었을 경우 생장률이 대조구 대비 30% 감소하였다. H. fusiforme는 인산염과 무기비소를 구분하지 못하여 인산염의 농도가 낮은 경우 무기비소 축적량이 증가하게 되고, 축적된 무기비소는 광합성 저해 및 세포분열을 방해하여 생장률을 억제한다. 특히 우리나라의 대표적인 양식생물인 H. fusiforme는 다른 해조류에 비해 상대적으로 무기비소 축적량이 높다고 알려져 있기 때문에, H. fusiforme의 식품안전성을 확보하기 위해 다양한 연구가 필요하다.

Piezoelectric energy harvesting technology is attracting attention, as it can be used to convert more accessible mechanical energy resources to periodic electricity. Recent developments in the field of piezoelectric energy harvesters (PEHs) are associated with nanocomposites made from inorganic piezoelectric nanomaterials and organic elastomers. Here, we used the BaTiO3 nanoparticles and piezoelectric poly(vinylidene fluoride) (PVDF) polymeric matrix to fabricate the nanocomposites-based PEH to improve the output performance of PEHs. The piezoelectric nanocomposite is produced by dispersing the inorganic piezo-ceramic nanoparticles inside an organic piezo-polymer and subsequently spin-coat it onto a metal plate. The fabricated organic-inorganic piezoelectric nanocomposite-based PEH harvested the output voltage of ~1.5 V and current signals of ~90 nA under repeated mechanical pushings: these values are compared to those of energy devices made from non-piezoelectric polydimethylsiloxane (PDMS) elastomers and supported by a multiphysics simulation software.

Recycling of drained nutrient solution in hydroponic cultivation of horticultural crops is important in the conservation of the water resources, reduction of production costs and prevention of environmental contamination. Objective of this research was to obtain the fundamental data for the development of a recirculation system of hydroponic solution in semi-forcing cultivation of ‘Bonus’ tomato. To achieve the objective, tomato plants were cultivated for 110 days and the contents of inorganic elements in plant, supplied and drained nutrient solution were analyzed when crop growth were in the flowering stage of 2nd to 8th fruiting nodes. The T-N content of the plants based on above-ground tissue were 4.1% at the flowering stage of 2nd fruiting nodes (just after transplanting), and gradually get lowered to 3.9% at the flowering stage of 8th fruiting nodes. The tissue P contents were also high in very early stage of growth and development and were maintained to similar contents in the flowering stage of 3rd to 7th fruiting nodes, but were lowed in 8th node stages. The tissue Ca, Mg and Na contents in early growth stages were lower than late growth stages and the contents showed tendencies to rise as plants grew. The concentration differences of supplied nutrient solution and drained solution in NO3-N, P, K, Ca, and Mg were not significant until 5 weeks after transplanting, but the concentration of those elements in drained solution rose gradually and maintained higher than those in supplied solution. The concentrations of B, Fe, and Na in drained solution were slightly higher in the early stages of growth and development and were significantly higher in the mid to late stages of growth than those in supplied solution. The above results would be used as a fundamental data for the correction in the inorganic element concentrations of drained solution for semi-forcing hydroponic cultivation of tomato.

본 연구는 탐진강 유역의 열린하구 강진만에서 하천과 해양 간의 성상별 탄소물질의 이동 특성을 파악하였다. 탐진강에서는 대부분의 탄소물질이 DOC 형태로 강하구로 유출되며, 하구로 오면서 조간대에 펼쳐진 갈대군락지에서 POC가 국지적으로 공급되고 있었다. 이에 반해 강진만에서는 DIC의 조성비가 탐진강에 비해 높게 나타났으며, 이러한 무기탄소는 주로 해양에서 공급되고 있는 것으로 나타났다. 이러한 결과를 종합해보면, 탐진강 열린하구는 하천과 바다의 영향이 상호 교차하는 지역으로 강에서는 유기탄소의 공급이 바다에서는 무기탄소의 공급이 주로 이루어져서, 탄소물질의 하구순환이 이루어지고 있음을 파악하였다. 이상과 같이 열린하구에서의 탄소조성 변화를 파악함으로써 하천과 하구, 해양 생태계 간의 환경특성에 따른 탄소공급원을 이해할 수 있었으며, 향후 보다 종합적인 연구를 위해 국내의 닫힌 하구와의 비교 자료로 활용될 수 있을 것이다.

To abate the problem of odor from restaurants, a hybrid adsorbent consisting of organic and inorganic materials was developed and evaluated using acetaldehyde as a model compound was deveioped and evaluated. Powders of activated carbon, bentonite, and calcium hydroxide were mixed and calcinated to form adsorbent structure. The surface area of the hybrid adsorbent was smaller than that of high-quality activated carbon, but its microscopic image showed that contours and pores were developed on its surface. To determine its adsorption capacity, both batch isotherm and continuous flow column experiments were performed, and these results were compared with those using commercially available activated carbon. The isotherm tests showed that the hybrid adsorbent had a capacity 40 times higher than that of the activated carbon. In addition, the column experiments revealed that breakthrough time of the hybrid adsorbent was 2.5 times longer than that of the activated carbon. These experimental results were fitted to numerical simulations by using a homogeneous surface diffusion model (HSDM); the model estimated that the hybrid adsorbent might be able to remove acetaldehyde at a concentration of 40 ppm for a 5-month period. Since various odor compounds are commonly emitted as a mixture when meat is barbecued, it is necessary to conduct a series of experiments and HSDM simulations under various conditions to obtain design parameters for a full-scale device using the hybrid adsorbent.

PURPOSES: The object of this study is to select appropriate inorganic materials, and find the best mixing formula to secure fast curing time and enough initial strength, and then to evaluate the durability of the asphalt mixtures according to the degree of addition of the compound manufactured by the determined blending ratio. METHODS : The breaking time and reactivity between seven kinds of inorganic minerals, and the selected recycled aggregate and emulsified asphalt were compared to determine the best initial curing strength for the mixtures. Then, three inorganic materials were chosen as the materials that provide good breaking time and reactivity, and the best mixing formula for the three materials was determined. The chemical composition of the compound manufactured using the mixing formula was analyzed by energy dispersive x-ray system method. Finally, indirect tensile strength (ITS) test was performed (for two days) at room temperature to determine the proper amount of additives that will provide the best initial strength. RESULTS: From the results of the reactivity test, the best mixing formula (A:C:G = 60:30:10) for the three selected inorganic materials with short braking time and high reactivity was determined. The four types of cold reclaimed asphalt mixtures for ITS testing were manufactured by adding the inorganic material compounds at 0%, 3%, 5%, and 7%, and the ITS values were measured after two curing days. The ITS values at 5% and 7% were 0.308 MPa and 0.415 MPa, respectively. The results of quality control tests (Marshall stability, porosity, flow value, etc.) at 5% and 7% satisfied the specification criterion for the cold recycled asphalt mixtures. CONCLUSIONS : The selected inorganic materials (A, C, and G) and the best mixing formula (A:C:G = 60:30:10) accelerated the reaction with emulsified asphalt and shortened the curing time. Depending on the inorganic material used, the breaking time and reactivity can be directly related or unrelated. This is because of the chemical compositions of recycled aggregates, infiltrated foreign matter, and chemical reactions between the inorganic materials and other materials. Therefore, it is important to select the proper materials and the best mixing formula when evaluating the characteristics of the practically used materials such as recycled aggregates, inorganic materials, and emulsified asphalt.

PURPOSES : The objective of this study is to evaluate the performance of combined organic and inorganic hybrid mortar used as repair materials (UM mortar) for concrete road facilities by comparison with cement repair materials (RM mortar). METHODS: In order to produce UM mortar, four different levels of inorganic materials were adopted and the ratio of main resin to hardener was fixed at 1:2. For comparison, RM mortar made with cement repair materials was also produced. Fluidity, strength characteristics, length change, and freezing-thawing resistance of the mortars were measured at the predetermined periods. In addition, the microstructures of the mortars was performed on the 28-day mortar samples to examine the properties of the interfacial transition zone (ITZ). RESULTS : It was observed that the mechanical properties, except for compressive strength, and freezing-thawing resistance of UM mortars were much better than those of RM mortar. Furthermore, showing a densified ITZ properties on the UM mortars from the microstructural observation, the usage of UM mortars exhibited a beneficial effect on the enhancement of mortar properties. CONCLUSIONS: It is concluded that the application of combined organic and inorganic hybrid mortars is a possible option for the repair of deteriorated concrete road facilities.

An organic filler, bis-(N-α-amido-3,4-dihydroxyphenylalanine)-1,7-heptane dicarboxylate (DOPA-C7) is applied to gas separation membranes for CO2/N2 separation. The weak interaction between SBS and DOPA-C7 improves CO2/N2 selectivity, from 14.1 to 21.1 with increasing of CO2 permeability from 347.5 to 349.7 Barrer. This phenomenon is caused by the catechol group of DOPA-C7 that can work as a Lewis Base. However, the strongly interacting PEBAX/DOPA-C7 membranes show a typical trade-off behavior, a decrease in CO2 permeability and increase in CO2/N2 selectivity with the filler contents. This results demonstrate that interactions between the filler and polymeric matrix can cause negative effects on the gas separation performance. This work opens up the feasibility of using a catecholic compound in gas separation membranes.

FASs (fluoroalkylsilanes)로 표면 개질한 소수성 막에 대한 부탄올/물, 이소프로판올/물 용액의 수착(sorption)량을 측정하였으며 이들 수착 특성을 Hansen 용해도 파라미터를 이용하여 해석하였다. 부탄올의 수착량이 이소프토판올보다 많았으며, 이는 부탄올의 용해도 파라미터(δt = 20.4)와 FASs 소수성 막의 용해도 파라미터(δt = 16.9)와의 차이가 이소프로판올 (δt = 24.6)과의 차이보다 작기 때문인 것으로 설명할 수 있다. 극성력(δp) 측면에서 살펴보면, FASs 극성력(δp = 4.6)과 부탄올의 극성력(δp = 6.3)과의 차이가 FASs 극성력(δp = 4.6)과 이소프로판올의 극성력(δp = 9.0)과의 차이보다 작다. 이는 부탄올-FASs 간의 극성력 차이가 이소프로판올-FASs 간의 극성력 차이보다 작아서 부탄올-FASs 간의 상호인력이 크다는 것 을 의미하며, 수착량이 크게 나타나는 결과를 설명할 수 있다. 본 실험결과로부터 막에 대한 알코올의 수착특성, 용매에 대한 용질의 용해도 등을 분석하는데 용해도 파라미터를 이용할 수 있음을 알 수 있다.

본 연구에서는 일반적으로 O/W 에멀젼에 비해 안정화가 어려운 W/O 에멀젼, 특히 유동성이 높은 저점도 W/O 에멀젼의 안정성 증진을 위하여 유화제, 전해질, 유화 안정화제, 겔화제 등을 적용한 다양한 실험을 수행하여 보았다. 그 결과 이번 실험에서는 Polyglyceryl-4 diisostearate/ polyhydroxystearate/sebacate를 주 유화제로 하면서 PEG-30 dipolyhydroxystearate와 Cetyl PEG/PPG-10/1 dimethicone을 보조 유화제로 하는 유화 체계에, 전해질로 Sodium chloride를 0.5 %, 유화 안정화제로 Distearyldimonium chloride를 1 %, 유상 겔화제로 Glyceryl behenate/eicosadioate를 0.5 % 적용한 유화 입자도 작고 조밀하며 점도도 2,000 cps 이하로 일정하게 유지되는 안정한 저점도 W/O 에멀젼을 제조할 수가 있었다. 또한 상기와 같은 에멀젼 베이스에 무기 자외선 차단성분의 적용 실험을 통하여 안정성이 우수한 저점도 플루이드형 자외선 차단제품의 개발 가능성도 긍정적으로 검토 할 수가 있었다.

최근 우수한 유연성과 화학적 안정성 등을 가진 고분자 수지와 우수한 기계적 성질 등을 나타내는 무기 재료로 이루어진 나노 복합 시스템으로써 유-무기 하이브리드 코팅 필름에 관한 연구가 활발히 진행되고 있다. 아크릴레이트 단량체로써 사용된 o-phenylphenoxyethyl acrylate (OPPEA)는 1.576의 높은 굴절률을 나타내고, Bisphenol A ethoxylate diacrylate (BAEDA)는 굴절률은 낮지만 경화된 고분자의 경도를 향상시킨다. 또한, 무기 소재로써 사용된 지르코니아는 산화지르코늄으로써 우수한 내구성과 광학특성 등을 나타낸다. 본 연구에서는 광학 특성을 향상시키기 위한 목적으로 아크릴레이트 단량체 중 BAEDA의 함량을 조절하여 필름을 제조한 뒤 연필 경도계와 아베굴절계를 이용하여 광학 특성 변화를 확인하였고, UV-vis spectrophotometer을 이용해 투과도를 비교하여 최적의 조건을 확립하였다. 그리고 실란 커플링제인 γ-methacryloxypropyltrimethoxysilane (MPS)를 사용하여 지르코니아를 소수화 처리하여 아크릴레이트 단량체에 대한 분산성을 향상시키고, 개질 전후의 물에 대한 분산성 변화를 조사하여 물에 대한 친화력이 감소하였음을 확인하였고, FT-IR ATR spectrophotometer를 통해 MPS에 의해 도입된 1716 cm-1에서의 에스터 C=O 결합 peak의 존재를 통해 MPS에 의한 지르코니아 표면의 개질 반응이 진행되었음을 확인하였다. 또한, 지르코니아의 표면에 도입된 규소 원자의 존재는 X 선 형광법을 이용하여 확인하였다. 그리고 화학적으로 개질된 지르코니아를 아크릴레이트 단량체에 도입하여 광경화 필름을 제조하였을 때, 굴절률은 아크릴레이트 자체 필름보다 1.2% 향상되었음을 확인하였고, SEM/EDS mapping 분석을 통해 PET 필름에 코팅된 개질 후 지르코니아가 아크릴레이트 코팅층에 균일하게 분포되어 있음을 알 수 있었다.

지표수 성상을 재현한 용액을 가압식 한외여과 시스템을 통하여 100 L/m²/h 정속 조건에서 전량 여과하였다. 공극 크기 0.05 μm의 한외여과 중공사막으로 구성된 가압식 모듈을 통해 휴민산(HA) 10 mg/L 용액과 알긴산 나트륨(SA) 10mg/L 용액, 그리고 이 두 용액에 실리카(SiO2) 입자 50 mg/L이 포함된 총 4가지 용액을 여과하였다. 여과 공정은 30분 여과 후 30초 역세와 30초 정세의 주기적 물리 세정과 병행하여 수행되었다. 실험 결과, HA와 SA 용액에 SiO2 입자가 존재하는 경우 파울링 속도는 다소 감소하였으며 특히 SA 여과에서 SiO2 입자 위에 형성된 SA 케이크층이 세정에 의해 SiO2 입자와 함께 탈착되어 물리세정에 의한 분리막 성능 회복이 크게 증가하는 것으로 나타났다.

In this study, effects of nutrient and inorganic carbon on single cell emergence during the cultivation of microalgae were observed using colonial green algae, Pediastrum duplex. The concentration of inorganic carbon had significant effect on single cell emergence and its growth, but nitrogen and phosphorus concentration showed minor effects. According to P. duplex cultivation experiment, single cell started to be emerged around 500~750 mg-C/L of inorganic carbon concentration and it was bloomed dramatically at the higher values. And growth of P. duplex was started to be surpressed at the single cell formation concentration. From the results, it could be said that when we operate the microalgae systems for cultivation/harvesting or wastewater treatment, in order to avoid single cell formation, inorganic carbon should be maintained to the proper level