In this study, effect of mixing ratio of -carrageenan and glucomannan on quality characteristics of jelly incorporated with omija concentrate were analyzed. Through previous studies, the concentration of the gelling agent was fixed at 1.5% of the weight of the jelly. As a control, omija concentrate jelly using a single gelling agent was prepared. The texture of the jelly using glucomannan alone could not be measured because it was difficult to maintain its shape. The texture was changed according to the mixing ratio of -carrageenan and glucomannan. When -carrageenan was mixed with glucomannan, the water holding capacity was increased. Jelly prepared in mixing 2:1 ratio of -carrageenan and glucomannan was observed to have the highest hardness, springiness, gumminess, cohesiveness, and chewiness. Also, in order to manufacture omija jelly that maintains high water retention for a long period of time, it is optimal to mix -carrageenan and glucomannan at a ratio of 1:2.

This study was conducted to find an efficient and economical mixing ratio of deodorant and a isolated microorganism to reduce ammonia in livestock manure compost. In this study, a simple experimental device that can compare the degree of odor reduction by connecting the vial containing the odor generating source and the gas detection tube and leaving it to stand was used. This test method cannot accurately measure ammonia concentration according to the characteristics of the detector tube, but it is an easy method to compare various experimental conditions. The microorganism isolated from pig manure, “Enterococcus casseliflavus” was found to have an effect on ammonia reduction. Surfactant (sodium dodecyl sulfate), mineral A, mineral B, sulfur, persimmon leaves, and glycerin used as a deodorant were mixed with E. casseliflavus NO-2-L to find the optimum mixing ratio. When 20% of deodorants and E. casseliflavus NO-2-L were added to the source of odor alone, the ammonia reduction efficiency of NO-2-L was the highest (66.7%) compared with other deodorants. When a mixture of microorganisms and deodorants were used, the ammonia reduction efficiency was the best when the mixing ratio of the deodorant was 20%. When mineral B and sulfur were added, the ammonia concentration reduction efficiency was the highest at 83.3%.

SiC-based composite materials with light weight, high durability, and high-temperature stability have been actively studied for use in aerospace and defense applications. Moreover, environmental barrier coating (EBC) technologies using oxide-based ceramic materials have been studied to prevent chemical deterioration at a high temperature of 1300℃ or higher. In this study, an ytterbium silicate material, which has recently been actively studied as an environmental barrier coating because of its high-temperature chemical stability, is fabricated on a sintered SiC substrate. Yb2O3 and SiO2 are used as the raw starting materials to form ytterbium disilicate (Yb2Si2O7). Suspension plasma spraying is applied as the coating method. The effect of the mixing method on the particle size and distribution, which affect the coating formation behavior, is investigated using a scanning electron microscope (SEM), an energy dispersive spectrometer (EDS), and X-ray diffraction (XRD) analysis. It is found that the originally designed compounds are not effectively formed because of the refinement and vaporization of the raw material particles, i.e., SiO2, and the formation of a porous coating structure. By changing the coating parameters such as the deposition distance, it is found that a denser coating structure can be formed at a closer deposition distance.

In the present study, single-phase heat transfer characteristics for downstream flow in the support grid of 6×6 rod bundle were investigated. It has been known that a turbulence generation due to a support grid with split mixing vanes enhances heat transfer in rod bundle but its heat transfer enhancement actually affects to relatively shorter distance. On the other hand, it has been also turned out that a support grid with large scale vortex flow (LSVF) mixing vanes results in heat transfer enhancement to a longer distance. Based on the results of literatre survey, single-phase water heat transfer experiments were performed for Reynolds numbers at around 30,000, and the heat transfer enhancement effect with both i) the split mixing vanes and ii) the LSVF mixing vanes was compared in this study. The key results showed that the effect of heat transfer enhancement in rod bundle region by the split mixing vanes was maintained up to the length of 15Dh behind the spacer grid. For the Reynolds numbers at around 30,000, it was also observed that the effect using the LSVF mixing vanes was stronger at about 3% when compared to the case using the split mixing vanes only for the distance ranging from 1 to 15Dh behind the spacer grid.

The effect of the mixing method on the characteristics of hybrid-structure W powder with nano and micro sizes is investigated. Fine WO3 powders with sizes of ~0.6 μm, prepared by ball milling for 10 h, are mixed with pure W powder with sizes of 12 μm by various mixing process. In the case of simple mixing with ball-milled WO3 and micro sized W powders, WO3 particles are locally present in the form of agglomerates in the surface of large W powders, but in the case of ball milling, a relatively uniform distribution of WO3 particles is exhibited. The microstructural observation reveals that the ball milled WO3 powder, heat-treated at 750oC for 1 h in a hydrogen atmosphere, is fine W particles of ~200 nm or less. The powder mixture prepared by simple mixing and hydrogen reduction exhibits the formation of coarse W particles with agglomeration of the micro sized W powder on the surface. Conversely, in the powder mixture fabricated by ball milling and hydrogen reduction, a uniform distribution of fine W particles forming nano-micro sized hybrid structure is observed.

We investigate the microstructural and magnetic property changes of DyH2, Cu + DyH2, and Al + DyH2 diffusion-treated NdFeB sintered magnets with the post annealing (PA) temperature. The coercivity of all the diffusiontreated magnets increases with increasing heat treatment temperature except at 910oC, where it decreases slightly. Moreover, at 880oC, the coercivity increases by 3.8 kOe in Cu and 4.7 kOe in Al-mixed DyH2-coated magnets, whereas this increase is relatively low (3.0 kOe) in the magnet coated with only DyH2. Both Cu and Al have an almost similar effect on the coercivity improvement, particularly over the heat treatment temperature range of 790-880oC. The diffusivity and diffusion depth of Dy increases in those magnets that are treated with Cu or Al-mixed DyH2, mainly because of the comparatively easy diffusion path provided by Cu and Al owing to their solubility in the Nd-rich grain boundary phase. The formation of a highly anisotropic (Nd, Dy)2Fe14B phase layer, which acts as the shell in the core-shell-type structure so as to prevent the reverse domain movement, is the cause of enhanced coercivity of diffusion-treated Nd-Fe-B magnets.

본 연구에서는 메탄 대향류 확산 화염내 탄소나노튜브의 합성에 대하여 실험 및 수치적 연구를 수행하였다. 아세틸렌을 일정비율로 메탄에 혼합하여 연료 가스로 사용하였으며, 탄소나노튜브의 합성을 위한 촉매로서 페로센이 이용되었다. 주요 인자로는 메탄 연료에 대한 아세틸렌의 혼합비율이며, 2 %, 6 %, 10 %로 혼합하였다. 탄소나노튜브를 채취한 그리드 위의 탄소나노튜브 합성 특성은 SEM 이미지로 분석되었다. 수치해석에서 화학반응 메카니즘으로는 GRI-Mech 3.0 이 적용되었다. 수치결과로는 아세틸렌 혼합 비율이 증가할수록 화염 온도도 증가하며 CO 몰분율도 증가하는 것을 알 수 있다. 실험결과로는 2% 아세틸렌 혼합 화염이 6 % 및 10 % 혼합 화염과 비교해 탄소나노튜브 합성이 잘 이루어졌음을 알 수 있었다. 이것은 6 % 및 10 % 아세틸렌 혼합화염의 경우 과도한 카본 소스의 생성이 발생해 오히려 화염 내 카본소스가 촉매입자로의 공급을 방해하기 때문이라 생각한다. 이 결과로부터 양호한 질의 탄소나노튜브 생성을 위해서는 적정한 양의 카본소스가 생성되어야 한다는 것을 알 수 있었다.

The objectives of this study were to evaluate the antimicrobial effects of ε-poly-L-lysine mixture (EPM) on cheon-ggukjang and to determine the optimal mixing ratio in cheonggukjang. Increasing the EPM up to 2% decreased via-ble cell counts at both 15oC and 30oC storage. The pH of cheonggukjang without EPM increased slowly over thestorage periods, but cheonggukjang with EPM showed a slight increasing tendency, with the highest pH at 2% EPM.The sensory scores, such as texture and flavor, were highest in samples containing 2% EPM; however, overall pref-erence was not significantly different when compared to the control. For the optimum cheonggukjang processingconditions, 13 experimental points were selected. Soybean and EPM were chosen as independent variables. Viablecell count, pH, texture, and overall preference were measured. The optimum formulation of cheonggukjang usingthe numerical analysis was found to be 98.52% soybean and 1.48% EPM, resulting in a 0.722 desirability value.

Metal foams have a cellular structure consisting of a solid metal containing a large volume fraction ofpores. In particular, open, penetrating pores are necessary for industrial applications such as in high temperature filtersand as a support for catalysts. In this study, Fe foam with above 90% porosity and 2 millimeter pore size was suc-cessfully fabricated by a slurry coating process and the pore properties were characterized. The Fe and Fe2O3 powdermixing ratios were controlled to produce Fe foams with different pore size and porosity. First, the slurry was preparedby uniform mixing with powders, distilled water and polyvinyl alcohol(PVA). After slurry coating on the polyure-thane(PU) foam, the sample was dried at 80℃. The PVA and PU foams were then removed by heating at 700℃ for 3hours. The debinded samples were subsequently sintered at 1250℃ with a holding time of 3 hours under hydrogenatmosphere. The three dimensional geometries of the obtained Fe foams with an open cell structure were investigatedusing X-ray micro CT(computed tomography) as well as the pore morphology, size and phase. The coated amount ofslurry on the PU foam were increased with Fe2O3 mixing powder ratio but the shrinkage and porosity of Fe foams weredecreased with Fe2O3 mixing powder ratio.

본 연구는 옥수수 수확 시 세절여부에 따라 제조된 옥수수 사일리지를 이용하여 TMR 제조시 배합시간에 따른 물리적 특성(Particle size 및 laceration)과 반추위 내 in situ 건물분해율에 미치는 영향을 조사하고자 수행되었다. TMR 시험사료는 세절(20 mm)한 것(T1구)과 세절하지 않은 옥수수 사일리지(T2구)를 이용하여 총 60분간 배합하면서 시료를 채취한 후 Penn State Particle Separator(PSPS)로 분석하였다. 모든 배합시간에서 T2구보다 T1구에서 상층(>19 mm)과 하층(<8 mm)이 유의적으로 낮았고(p<0.05), 중층(8-19 mm)은 유의적으로 높았으며, 굵은 비율(≥1 mm)의 감소율도 높은 경향을 나타내었다. 그리고 peNDF>8.0 및 반추위 내 in situ 건물분해율도 T1구에서 유의적으로 높게 나타났다(p<0.05). 본 연구 결과에서 옥수수 사일리지 위주의 TMR 제조 시 세절하지 않은 것보다 세절한 옥수수 사일리지가 적정 peNDF 범위가 유지되어 조사료로서 사료적 가치를 증진하는데 효과가 있을 것으로 기대된다.

In this study, intermediate-mixed powders were prepared by loading zirconia powders initially in a ball-mill jar and loading alumina powders afterward; the initial-mixed powders were produced by loading zirconia and alumina powders together in the ball-mill jar. The effect of such differences in mixing method on the mechanical properties was investigated. In intermediate-mixed powders, the volume fraction of large particles slightly increased and, simultaneously, zirconia particles formed agglomerates that, due to early ball-mill loading of the zirconia powders only, were more dispersed than were the initial-mixed powders. For the intermediate-mixed powders, zirconia agglomerates were destroyed more quickly than were initial-mixed powders, so the number of dispersed zirconia particles rose and the inhibitory effect of densification due to the addition of a second phase was more obvious. In the microstructure of intermediate-mixed powders, zirconia grains were homogeneously dispersed and grain growth by coalescence was found to occur with increasing sintering temperature. For the initial-mixed powders, large zirconia grains formed by localized early-densification on the inside contacts of some zirconia agglomerates were observed in the early stages of sintering. The intermediate-mixed powders had slightly lower hardness values as a whole but higher fracture toughness compared to that of the initial-mixed powders.

매연과 다중고리 방향족 탄화수소의 생성에 대하여 n-헵탄의 혼합의 영향을 알아보기 위하여 순수에틸렌 대향류 확산화염에 n-헵탄을 소량 혼합하여 실험을 수행하였다. 매연체적분율과 PAH의 생성 계측에서는 레이저 유도 형광법 (laser-induced fluorescence; LIF)과 레이저 유도 백열법(laser-induced incandescence; LII)의 레이저 계측법을 이용하였다. 실험결과로 순수 에틸렌 화염에 소량의 n-헵탄을 혼합한 경우에는 매연과 다중고리 방향족 탄화수소가 상승하였다. 그러나 20% n-헵탄 혼합화염의 경우 LIF 신호가 감소하였다. 소량의 혼합화염의 경우, 다중고리 방향족 탄화수소와 매연의 상승은 n-헵탄 혼합에 의해 저온 영역에서의 메틸 라디칼의 증가로 의한다고 사료된다. 10% n-헵탄 혼합화염에 대한 화학반응 프로세스를 살펴본 결과 H 라디칼에 의한 반응율이 벤젠 생성에 결정적인 역할을 한다는 것을 알 수 있었다.

순환식 수경재배에서 배액의 EC, 부피, 관수량은 재사용 양액의 혼합비율을 결정하는 중요한 요소 중 하나이다. 적산 일사량 제어법으로 관수할 경우 일일 관수량의 예측은 곤란하며 일반적으로 고정된 혼합비율을 사용한다. 이 경우 새 양액이 고정적으로 투입되어 양분의 조정 효과가 기대되지만, 때때로 배액의 강제배출을 필요로 한다. 본 연구는 적산 일사량 제어법으로 관수하는 순환식 수경재배 조건에서 배액의 혼합비를 고정한 처리구(FR)와 정해진 혼합 용량 내에서 배액의 부피와 EC에 따라 혼합비를 변경하는 처리구(MR)의 재사용 양액 내 양분 조정효과를 비교하여 양수분 이용효율이 높은 혼합방식의 규명에 기여하고자 수행하였다. 배액의 농도 변화를 비교하기 위한 대조구로는 비순환식 수경재배 처리구(OP)를 구성하였다. FR처리구의 배액 혼합 비율은 배액의 희석 EC를 각각1.0, 2.0dS·m-1로 설정하여 혼합처리를 적용하였다. MR 처리구의 경우는 혼합 용량을 1회 관수량을 기준으로 배액의 EC와 부피에 따라 혼합비율이 변경되도록 하였다. 배액의 누적 현상은 FR 1.0 처리구에서 관찰되었으며, FR 2.0과 MR 처리구에서는 배액 누적현상이 나타나지는 않았으나 MR 처리구의 배액 저장량이 FR 2.0 처리구에 비해서 낮게 나타났다. 배액과 재사용 양액 내 Mg2+:K+:Ca2+와 SO2-4:NO-3:PO3-4의 당량 농도 간 비율 변화는 FR, MR 처리구에서 초기비율 대비 비교적 좁은 변화 범위를 나타냈다.

본 연구는 부산물 혼합 silage 사료 급여가 한우 비육전기 거세우의 채식 및 반추행동에 미치는 영향을 규명하기 위하여 실시하였다. 시험에 사용한 공시한우는 21개월령 총 12두를 3처리로 배치하였으며, 이 때 처리구는 관행구 (C구: 농후사료+ 볏짚 자유채식)와 부산물 혼합 silage 구를 2처리 (T1: 농후사료+부산물 혼합 silage 제한급여 (1 kg) + 볏짚 자유채식, T2: 농후사료+부산물 혼합 silage 자유채식)로 하여 48시간

겨울피복작물로 재배되는 헤어리베치는 토양과 동반작물에 질소를 공급한다. 본 시험은 겨울철에 헤어리베치와 사료작물을 혼파할 때 수량 및 사료가치의 개선정도를 알아보기 위해 3년간 수행되었으며 그 결과를 요약하면 다음과 같다. 호밀-헤어리베치 혼파시 호밀의 초장은 다소 감소하였으며 혼파에 따른 호밀 출수기는 큰 차이가 없었다. 건물 함량은 헤어리베치의 비율이 늘어날수록 낮아졌으나 파종방법에 따른 유의 적인 차이는 없었다. 조단백질 함량도 베치가 21.7∼2