One of the options for spent fuel dry storage systems is to store them in canisters using metal or concrete casks close to shore. The interaction between the austenitic stainless steel and the chloride atmosphere generated from the sea creates detrimental conditions leading to chloride induced stress corrosion cracking (CISCC) in the canister. The corrosion integrity of the canister in the concrete cask is very important because the canister is sealed and used for a long period of time. A canister made of austenitic stainless steel has several welding lines on the wall and lid, which are generated during the welding process and have high residual tensile stress. The interaction between the austenitic stainless steel and the chloride atmosphere generated from the sea creates detrimental conditions leading to chloride induced stress corrosion cracking (CISCC) in the canister. The corrosion integrity of the canister in the concrete cask is very important because the canister is sealed and used for a long period of time. In order to evaluate such soundness, an accelerated test capable of simulating the CISCC crack propagation phenomenon of the canister weld is required. In this study, a test device for performing the CISCC simulation test was constructed using the DCPD device. The direct current potential drop (DCPD) technique is a widely accepted method of monitoring crack initiation and growth in controlled laboratory tests. In its simplest form it involves passing a constant current through the test piece and accurately measuring the electrical potential across the crack plane, and it is a suitable device to measure crack growth in real time. The requirements for the CISCC simulation test selected based on the literature search results include test material 316 L, load range 1.75YS, positive displacement load, and 7% MgCl2 concentration. In order to smoothly evaluate these various conditions, it was determined that it is advantageous to collect crack length data in real time using a DCPD device, rather than receiving and analyzing specimens maintained for a certain time in the chamber. Therefore, in this study, 4 types of test conditions in real time was built, and data collection on crack propagation could be performed in real time by using it.

The radionuclide inventory in radioactive waste from nuclear power plants should be determined to secure the safety of final repositories. As an alternative to time-consuming, labor-intensive, and destructive radiochemical analysis, the indirect scaling factor (SF) method has been used to determine the concentrations of difficult-to-measure radionuclides. Despite its long history, the original SF methodology remains almost unchanged and now needs to be improved for advanced SF implementation. Intense public attention and interest have been strongly directed to the reliability of the procedures and data regarding repository safety since the first operation of the low- and intermediate-level radioactive waste disposal facility in Gyeongju, Korea. In this review, statistical methodologies for SF implementation are described and evaluated to achieve reasonable and advanced decision-making. The first part of this review begins with an overview of the current status of the scaling factor method and global experiences, including some specific statistical issues associated with SF implementation. In addition, this review aims to extend the applicability of SF to the characterization of large quantities of waste from the decommissioning of nuclear facilities.

In this study, the flow analyses were carried out on the electric train models with three kinds of mounting materials installed at the front part of train. By examining the results of flow rate and pressure, It was investigated which type of design should be designed to be more efficient in high-speed operation. The three types of models are set as models a, b and c, and each has its own shape. For all models, the wind speed was set at 110 km/h, the most common driving speed for wide-area electric trains. In the case of the model a, it was good at cutting the wind flow as a round shape when viewed from the top. But from the side, it showed a vortex forming in the upper corner. To the contrary, the model b, which has a wedge-shaped side, could be seen from the top as a result of a vortex. Finally, in the case of model c combined with models a and b, the least vortex, front pressure, and resistance forces were shown by selecting the flow advantages of models a and b. By utilizing this study result, the flow velocity and pressure are investigated without flow experiment by shape of the front part of electric train, and the flow capacity can be seen.

모듈러 강교량 제작, 조립, 설계, 시공단계에서 상부모듈의 부품정보를 효율적으로 제공하고 교환하기 위하여 BIM (Building Information Modeling) 프로젝트에서 정보교환을 위하여 사용하는 국제표준인 IFC 모델을 활용한 부품정보 라이 브러리 구축방법을 제시하였다. 모듈러 강교량의 상부모듈을 구성하는 부품정보를 IFC 모델로 표현하기 위하여 의미론적 인 관점에서 기존 IFC 모델에서 부품정보를 표현할 수 있는 엔티티와 모듈러 강교량의 구성요소를 매칭하여 적용하였으 며, 구성요소의 역할을 구분하기 위하여 매칭한 엔티티의 타입을 적용하거나 사용자정의 타입으로 정의하였다. 또한, 부품 정보 라이브러리에서 부품 및 조립품의 정보를 해당단계에서 효율적으로 제공하기 위하여 조립체계를 네 단계의 상세수준 (LoD)으로 구분하여 정의하였으며, 이를 IFC 모델로 표현하기 위하여 새로운 속성정보를 정의하였다. 마지막으로, IFC 모 델과 매칭하여 정의한 정보를 실제 모듈러 강교량 상부모듈에 적용하여 IFC 기반의 시범 라이브러리 정보를 생성하였다.

This study investigated the effect of solvent on the fabrication of Ni-free Fe-based alloy nano powders by employing the PWE (pulsed wire evaporation) in liquid and compared the alloy particles fabricated by three different methods (PWE in liquid, PWE in Ar, plasma arc discharge), for high temperature oxidation-resistant metallic porous body for high temperature soot filter system. Three different solvents (ethanol, acetone, distilled water) of liquid were adapted in PWE in liquid process, while X-ray diffraction (XRD), field emission scanning microscope (FE-SEM), and transmission electron microscope (TEM) were used to investigate the characteristics of the Fe-Cr-Al nano powders. The alloy powder synthesized by PWE in ethanol has good particle size and no surface oxidation compared to that of distilled water. Since the Fe-based alloy powders, which were fabricated by PWE in Ar and PAD process, showed surface oxidation by TEM analysis, the PWE in ethanol is the best way to fabricate Fe-based alloy nano powder.

OP-FTIR(Open-path Fourier Transform Infrared)을 광학적 센서로 활용하여 혹은 유독가스의 옥외 누출 및 농도분포를 신속하게 파악할 수 있는 유해가스 검색시스템을 가상환경 상에 구성하였다. 유해가스의 확산환경은 풍동실험과 유사하도록 CFD 모델을 사용하여 구성하였다. 신속한 연산이 가능하도 록, 1개의 가우스 함수를 사용한 SBFM 기법을 토대로 CT 프로그램을 만들었다. 캐노피 층보다 높은 고도 면에서 CFD 농도장 시뮬레이션으로부터 OP-FTIR 광로 통합농도 신호를 구성하였다. 이 신호를 CT 프로그램에 적용하여 CFD 농도장을 역추정한 후 CFD 결과와 비교해 봄으로써, OP-FTIR을 이용한 관 측시스템의 성능을 평가하였다. 단순한 시스템임에도 불구하고, 비교적 만족스러운 성능을 보였다.

추적자 SF6 가스농도의 공간분포를 예측하기 위하여 수동형 리모트 센싱 기술과 컴퓨터 단층 측정 기술을 접목시켜 도시모델을 모사한 풍동에서 시나리오에 따라 실험을 수행하였다. 풍동실험의 시나리오는 거리에 따른 스캐닝 방식과 각도에 따른 스캐닝 방식으로 실험을 수행하였고, OP-FTIR 원격 감시장비는 SF6 가스의 광로통합농도를 구하기 위하여 사용되었다. 또한 제안한 SBFM(Smooth Basis Function Minimization) 알고리즘은 SF6 가스농도를 공간정보를 예측하기 위하여 사용되었으며 최적의 Gaussian 함수 개수를 구하기 위하여 1개, 2개 및 3개의 Gaussian 함수를 적용하여 실험하였다. 실험 결과 SBFM 알고리즘에 의한 SF6 농도분포의 예측 결과는 실제 측정 결과와 비교할 때 1개의 Gaussian 함수를 적용한 결과의 상관계수가 0.755로 가장 잘 일치하였다. 아직 컴퓨터 단층 기술과 수동형 리모트 센싱 기술의 결합된 기술이 실험실적 연구단계이지만 SBFM 알고리즘과 기하학적 빔 스캐닝 기술이 보다 향상된다면 대기오염 감시 및 국방 분야에 폭 넓게 응용될 것으로 기대된다.

The present work illustrates the use of water-soluble cupric salts as ingredients of binder for injection molding of Cu. Parts produced are dense, homogeneous and have good surface finish, compared to those produced using conventional binder system. This new binder system provides also process-simplification benefit. with the purity of was selected for this study. Rapid sintering process involving thermal decomposing was successful in densification for 1h. Final density that is about of theoretical value could be obtained, and are distinguishable from conventionally processed W-Cu composites.

Pulsed wire evaporation (PWE) method is known as the promising production-technique for nanopowders. In this study, we developed and modified the previous single wire explosion equipment to the simultaneous two-wire explosion one for the fabrication of alloy or mixture of nano metallic powder. First of all, both the theoretical and empirical background of pulsed wire explosion of single wire were summarized, and compared with our experimental results for Cu and Al single wlre explosion. After then, the simultaneous wire evaporation equipment was designed, constructed, and tested. The current and voltage behavior were well matched between the calculated ones from the circuit equations, and the experimental results from simultaneous explosion of Cu and Al wire.

남해안 연근해에서 조업하는 정치망 어선에 양망작업시 보조기계로 사용되는 캡스턴의 드럼에서 용접부 온도분포 및 구배를 해석한 결과의 주요 사항은 다음과 같다. 1. 용융부 근처는 냉각개시 1초 이내에 950℃/sec, 10초 이내는 40℃/see 정도의 급격한 냉각속도가 형성되었다. 2. 열영향부(HAZ)는 용접 후 1초가 경과할 때 370℃/sec의 가열속도로 온도가 증가한 후, 이 후 25℃/sec 냉각속도로 온도가 감소한다. 용접종료 10초 후 모재 내부에는 1.64℃/mm, 40초가 지났을 때는 0.26℃/mm 정도의 온도구배가 형성되었다. 3. 용접부 근처는 길이 방향을 따라 격심한 온도편차를 보이고 있으나 두께방향으로는 거의 나타나지 않는다. 이 결과는 향후 캡스턴 드럼의 용접부 최적설계시, 탄소성 열응력 및 열변형 거동을 해석하는 연구의 기초자료로 활용될 수 있을 것이다.

Background : The cultivation method of ginseng (Panax ginseng C. A. Meyer) has been introduced not only in the existing shading facilities but also in the cultivation method using the rain shelter house. In addition, direct seedling cultivation of ginseng is increasing in order to save labor. Ginseng cultivation area in the northern area is increasing with the disappearance of first planted field. Proper shading method in the northern ares is needed to grow direct grown ginseng using rain forest house. Methods and Results : Shading method using rain shelter house was Polyethylene film with layered polyethylene net 75%, blue-white duplicated PE film 85%, blue-white duplicated PE film 90%. Plant materials is 5-years-old Ginseng using direct seedling cultivation. In order to select proper shading materials of the rain shelter house in northern area, we investigated photosynthetic properties and growth of 5-years-old ginseng in rain shelter house. The temperature and humidity were slightly different between the traditional conventional shade facility and the rain shelter house, but the light intensity of the shading facility tended to decrease with the passage of time. The difference in shading method in rain shelter house was the highest at polyethylene film with layered polyethylene net 75%. As a result of the growth characteristics of the top part, 90% of blue-green double-sided film showed the greatest growth with 89.8 ± 1.5. The difference in top part between rain shelter house and shading facility is about 23 ㎝. Conclusion : Although the above growth characteristics of the ginseng shows this tendency, the root growth characteristics of the ginseng must be further observed.

본 연구에서는 TS 내진보강공법의 내진보강 효과 검증을 목적으로 7개의 지진파에 대한 TS 댐퍼(Tension Spring-Damper)로 내진보강된 구조물의 비선형 시간이력해석을 수행하였다. 비선형 시간이력 해석을 통해 얻어진 무보강 구조물의 층간변위비와 에너지소산 양과 비교한 결과 층간변위비가 약 30% 가량 감소하였고, 구조체를 통한 에너지 소산의 양은 반감되었다. 이를 통해 TS 내진보강공법의 제진성능이 우수함을 확인하였다.

본 연구에서는 TS 내진보강공법의 내진보강 효과를 검증 할 목적으로 TS 댐퍼(Tension Spring-Damper)를 설치한 철근콘크리트 골조를 대상으로 한 반복 주기하중 재하 실험을 수행 하였다. 실험체는 기준 실험체인 무보강 골조 실험체와 3개의 보강 골조 실험체의 총 4개이며, 실험의 변수는 댐퍼 설치 여부, 댐퍼의 형상 및 시공방법이다. 그 결과 창호 내부 삽입 형식의 시공방법이 강도와 강성의 측면에서 2배가량, 외부 부착형식의 시공 방법이 에너지 소산의 측면에서 2배가량의 성능 향상을 나타내어 TS 내진보강공법이 현장 적용성과 내진보강 효과가 우수한 공법임을 확인 할 수 있었다.