The aim of this study was to prepare rice straw silage using cabbage by-product and persimmon peel which are agricultural by-products produced during the same season in Korea. The treatments comprised a commercial corn silage as the control and four rice straw silages (P15-1, P15-2, P30-1, and P30-2) with different levels of persimmon peel supplementation (15%, 30%) and ensiled periods (1 or 2 months). The cabbage by-products were used to adjust silage moisture (approximately 65%). The quality of the experimental silages was evaluated based on organic acid content, palatability to three Holstein dairy cows, and manufacturing cost. In the corn silage, all chemical compositions, except total digestible nutrients and levels of lactic and butyric acids, were significantly (p<0.05) higher than those of the rice straw silages. However, considering the quality analysis using Flieg's score, the rice straw silage supplemented with 30% persimmon peel ensiled for 2 months (P30-2) was estimated as second grade to corn silage, and was relatively better in palatability to dairy cows than the other rice straw silages, which were considered third grade. The manufacturing cost of rice straw silages using cabbage by-product and persimmon peel compared to that of corn silage was reduced by 28%. Consequently, to prepare rice straw silage adjusted to 65% moisture using only cabbage by-products without inoculant, 30% of persimmon peel, 10% of ground corn, and 2% of molasses as a sugar source should be ensiled for at least 2 months.

In the current study, lactic lactic acid bacteria (LAB) Lactobacillus plantarum and Pediococcus pentosaceus were used as a mixed additive for the production of Orchardgrass silage by ensiled method and nutritional change fermentation ability and microbial content of experimental silages. The addition of LAB to Orchardgrass during ensiling process rapidly reduced the pH of the silages than the non-inoculated silages. In addition, the lactic and acetic acid content of silage was increased by LAB strains than the non-inoculated silages whereas butyric acid content was reduced in silage treated with LAB. A microbiological study revealed that higher LAB but lower yeast counts were observed in inoculated silages compared to non-inoculated silage. Overall data suggested that the addition of LAB stains could have ability to induce the fermentation process and improve the silage quality via increasing lactic acid and decreasing undesirable microbes.

Ensiling is the most preferred technology to preserve the silage quality with high nutrients by the presence of lactic acid bacteria. In this study, lactic acid bacteria RJ1 and S22 were used to make the silages from different leguminous plants such as alfalfa, hairy vetch and red clover. Experimental groups were divided into control and LAB inoculated groups. LAB inoculated group; all legumes treated with a mixture of RJ1 and S22 and made an anaerobic condition for 45d. Without the addition of LAB considered the control group. The results showed that the lactic acid content was higher in all silages in response to LAB treatment and acetic acid content was slightly increased except red clover by LAB compared to control silages. A poor silage quality marker butyric acid was reduced all legume silages in response to LAB inoculation than control silages. The organic acid is closely associated with microbial population experimental silages. We noted that higher LAB and lower yeast were found in the silage in response to LAB treatment. The contents of crude protein (CP), acid detergent fiber (ADF), neutral detergent fiber (NDF), and total digestible nutrient (TDN) were not altered significantly between control and LAB treated silages. Overall data suggested that the inclusion of additional LAB potentially enhance the silage quality and preserved the nutrients for long period.

본 연구는 이탈리안 라이그라스 원형베일 사일리지 조제에 있어서 원료작물의 수분함량과 베일러 챔버의 압력에 따른 사일리지의 사료가치와 발효품질의 변화를 구명하기 위하여 수행되었다. 수확 후 1일(고수분), 2일(중수분) 및 4일간(저수분) 각각 예건하여 서로 다른 수분함량의 이탈리안 라이그라스를 베일러 챔버 압력이 115, 130 및 145 bar로 설정된 베일러로 원형베일 사일리지를 조제하여 60일간 저장하였다. 베일 사일리지의 무게는 고수분 처리구에서 높게 나타났고, 건물중은 저수분 처리구가 유의적으로 높게 나타났다. 베일러 압력에 따른 사일리지의 무게는 유의적인 차이는 없었으나, 압력이 증가할수록 건물중은 증가하였다. 수분함량과 베일러 압력에 따른 사일리지의 NDF, ADF, CP 및 CF는 처리 간에 유의적인 차이가 없었으며, RFV (relative feed value)는 고수분 저압력 처리구에서 가장 높게 나타났다. Lactic acid는 고수분-고압력 처리구가 가장 높았으며, 저수분-중압력 처리구에서 가장 낮게 나타내었다. Butyric acid는 베일러 압력에 따른 유의적인 차이는 없었으나, 예건기간이 길어질수록 감소하였다. 사일리지 pH는 고수분 처리구가 중수분과 저수분 처리구에 비해 낮게 나타났으나, 베일러 압력에 따른 차이는 없었다. 이러한 결과는 이탈리안 라이그라스 원형베일 사일리지 조제 시 조사료의 수분함량과 베일러 챔버의 압력이 사일리지의 발효품질에 영향을 미치는 중요한 요인임을 나타내는 것이다.

This experiment was conducted to a comparison of the productivity according to variety and forage quality by plant parts of imported silage corn (Zea mays, L) in Pyeongchang. The corns evaluated in this experiment were 8 varieties (P1184, P1151, P1194, P1543, P1345, P1429, P1443, and P2105) introduced from the United States, Pioneer Hybrid Co. The harvested corn was divided into 5 plant parts (leaf, stem, cob, husk, and grain), and the ratio of each part was calculated using dry weight and the feed value was analyzed. The emergence rate of corn was generally good except for the P1151 and P2105 varieties. The average tasseling date was July 24th and the silking date was July 27th, but the P2105 variety was late to July 28th and August 1st, and the remaining varieties were similar. P1345 was the highest (289 and 123 cm), and P1151 varieties were the lowest (267 and 101 cm) in the plant and ear height. Disease resistance was low in P1184, P1443 and P1429, and P1197 and P1345 were high. In the case of stover, the dry matter (DM) content was the lowest at 19.6% in the P1151 and the highest at 24.9% in the P1429. DM content of ear was the highest in the P2105 (55.5%), and P1184 (54.2%) and P1345 (54.3%) were also significantly higher (p<0.05). The DM yield of stover of P2105, P1429 and P1194 varieties was significantly higher (p<0.05), and ear yield of P2105, P1345 and P1443 was higher. The proportions of each part of plants (leaf, stem, cob, husk, and grain) divided by 5 was high, with 50-60% of the ear(grain+cob) ratio. The ratio of husk and cob was roughly similar, and the leaf and stem part showed a ratio of about 20%. The crude protein (CP) content was highest in leaf, followed by grain. The CP content of the stem was the lowest, and the husk was not significantly different among the varieties (p>0.05). The acid detergent fiber (ADF) content was similar to the rest parts except grain, but the leaf part tended to be lower, and other parts except the stem and leaf showed no significant difference between varieties (p>0.05). There was no significant difference in NDF (neutral detergent fiber) content in husk, but there was a difference between varieties in other parts (p<0.05). In addition, there was a special difference by plant parts for each variety, P2015 on the stem, P1197 on the leaf, P1151 on the cob, P1197 on the husk, and P1197 on the grains with high NDF content. IVDMD (in vitro dry matter digestibility) was not significantly different between stems and grains, but there was a difference between varieties in cobs and husks. According to the results, DM yield of P2105 variety was the best in the experiment, and the ratio of grain was excellent in P1543 and P1345. In addition, it was found that the feed value was higher in the leaves and grains, and the leaf and stem had higher feed values than husk or cob.

The goal of this study was to evaluate effects of various microbial and organic additives on chemical compositions, fermentation indices, and aerobic stability of barley silage. Youngyang barley harvested at 31.5% dry matter (DM), and ensiled into 20 L bucket silo for 0, 1, 3, 7, 48, and 100 d in quadruplicates with four additives following: sterile destilled water at 1% of fresh forage (CON); Lactobacillus plantarum at 1.2 x 105 cfu/g of fresh forage (CL); Lactobacillus buchneri at rate of 1.2 x 105 cfu/g fresh forage (LB); Fermented Persimmon Extract at 1% of fresh forage (FPE); and Essential Oil at 1% of fresh forage (EO). On 100 d of ensiling, CL and FPE silages had lower (p<0.05) DM than CON silage. Additionally, FPE silage had higher (p<0.05) crude protein than CON silage. All silages with additives, except EO, had higher (p<0.05) neutral detergent fiber (NDF) than CON silage. Silage treated with CL, LB, and FPE had lower in vitro DM digestibility than CON silage, and silages treated with LB and FPE had higher in vitro NDF digestibility (IVNDFD) on 100 d of ensiling. The PFE silage produced the highest (p<0.05) lactate during ensiling period, while LB silage produced the highest (p<0.05) acetate. All inoculated silages had higher (p<0.05) LAB count than control silage. Only CL silage had higher (p<0.05) yeast count than control silage, while the other silages were not differ compared to CON silage. The aerobic stability was higher (p<0.05) in LB and FPE silages than in CON silage. In conclusion, FPE could be an alternative additive to increase IVNDFD, fermentation indices, and aerobic stability of barley silage.

This study aimed to determine the optimal harvesting time for wheat to make grain silage, in Honam region of Korea. We harvested wheat grain every third day from 30 to 42 days after heading (DAH). The moisture content decreased from 61.6% at 30 DAH to 42.8% at 42 DAH. Yield of wheat grain significantly increased from 30 to 42 DAH (p< 0.05). Yield at 39 DAH (3.46T/ha) was not significantly different from that at 42 DAH (p< 0.05). With respect to the feed value of wheat grain silage, the amount of crude protein, crude fiber, and crude ash was different by harvesting time (p< 0.05). However, the amount of total digestible nutrients (TDN) from 30 and 42 DAH was not significantly different. The pH of wheat grain silage from 30 to 42 DAH was between 3.8 and 4.5 and it was stable until 39 DAH (p< 0.05). The lactic acid content of wheat grain silage from 30 to 42 DAH decreased from 3.08% to 1.10%. With respect to moisture content, yield, feed value, and fermentation, the optimal harvesting time for wheat grain silage was 39 DAH.

This study was conducted to investigate the feed value and silage quality according to storage period and film layers in whole crop oat silage. The crude protein content was increased in all silage during the storage periods compared to those before silage, under prolonged storage period slightly and the number of film layers of silage, six layer were higher than four layers, but no significant. NDF and ADF contents were also increased in all silage of storage duration compared to those before silage, but they was similar level between storage duration and number of film layers. TDN content was decreased of the storage duration. However, it was similar under the storage duration and the number of film layers. The pH value was decreased during prolonged storage period and six layers was lower than four layers depending on the film layers. In the organic acid contents, lactic acid and acetic acid were increased under the prolonged storage duration, and butyric acid was higher significantly(p<0.05), six layers of the film were showed higher lactic acid and lower butyric acid(p<0.05). Therefore, oat silage should be used within 6 months it was when treated with 4 layers, if considering the long-term storage, it is desirable to treat it with 6 layers or more.

This study was conducted to investigate the effect of addition of lactic acid bacteria inoculants on quality of rye silage harvested at early heading stage. The nutritive values in lactic acid bacteria (LAB) inoculated group showed similar results to control. The pH of rye silage in LAB inoculation significantly decreased as compared to control (P<0.05). In addition, the content of lactic acid in LAB inoculation significantly increased (P<0.05), but the content of acetic acid in LAB treatments decreased. In addition, lactic acid bacterial counts in LAB inoculation significantly increased as compared to control (P<0.05). Therefore, we suggest that rye silage could be improved by LAB inoculation.

A new barley(Hordeum vulgare L.) cultivar ‘Dachung’ having high forage yielding and good silage quality was developed at National Institute of Crop Science, RDA in 2015. This cultivar was derived from a cross of the ‘Sunwoo’ and ‘Keunalbori1ho’ in 2002. And it’s promising line showed both high yield and lodging resistance through the preliminary and advanced yield trials(PYT, AYT) at Iksan from 2010 to 2012. It was designated as the ‘Iksan479’. ‘Iksan479’ was conducted to regional yield trials(RYT) in six locations around Korea for three years from 2013 to 2015. And it was released as the name of ‘Dachung’. It has erect plant type, growth habit of IV and green leaf. In the paddy field its heading date was April 24 and maturing date was May 26, same day with ‘Youngyang’. Plant height of ‘Dachung’ was 99cm. Dachung’s spikes per m2 was 625. It has high rate of leaf blades, resistance to BaYMV(Barley Yellow Mosiac Virus) and better winter hardiness than that of ‘Youngyang’. The average dry matter of ‘Dachung’ was about 11.9 ton ha-1 in paddy field. And average feed quality of ‘Dachung’ was 9.0% of crude protein content, 31.3% of ADF (Acid Detergent Fiber), 54.4% of NDF (Neutral Detergent Fiber), 64.0% of TDN (Total Digestible Nutrients). ‘Dachung’ had grade I of silage quality. This cultivar would be suitable for the area above the daily minimum temperature of -8℃ in January in Korean peninsula.

The present study analyzes the role of Lactic Acid Bacteria Mixture (LBM) on improving rye silage quality. Rye of four different stages (Booting, Heading, Flowering, and Late flowering) was collected and silage was prepared. The nutrient profile analysis of experimental silage groups showed no significant changes between control and LBM inoculation. Interestingly, the pH of rye silage in LBM treatments showed significant reduction than control (p<0.05) in all stages of rye silage. However, lowest pH (3.69) resulted on booting stage among other stages of rye. Subsequently significant lactic acid production was noted in all stages of LBM inoculation than control. Conversely maximum lactic acid production of (5.33%DM) was noted at booting stage followed by (4.86%DM) in heading stage. Further the lactic acid bacterial (LAB) count in LBM inoculated group showed significant increase than control. Similarly, the silage of booting stage group registered maximum LAB population (63.7 ×106CFU/g) after that heading stage (32.3 ×106CFU/g). Further significant reduction in yeast growth and no fungal growth was noted in all LPM treatment groups. Hence, LBM inoculants could be a better additive for improving rye silage quality.

The present study investigated the effect of enzyme inclusion on silage quality using meta-analysis tool. A total of 16 research papers reporting the effect of enzyme application on silage quality were employed in the meta-analysis of this study. Mixed model for integrating quantitative results from multiple studies was used first to calculate the predicted error of each study. Individual error from the estimated model was the applied into standard deviation of each study to calculate the mean difference. Finally, summary effect was determined using standard mean difference (SMD) and inversed variance weighting. Mixed model analysis and SMD analysis showed the same effect patterns in all analysis items. Enzyme inclusion in silage significantly (p < 0.05) altered all silage quality characteristics investigated compared to control when enzyme was not included. Our results showed that enzyme treatment increased dry matter content, preserved crude protein effectively, and elevated water soluble carbohydrate content. However, the pH value, acetic acid, propionic acid, neutral detergent fiber, and acid detergent fiber contents in silage with enzyme inclusion were lower than those of the control.

본 연구에서는 호밀을 이용하여 사일리지 제조시 Lactobacillus plantarum KCC-10 및 KCC-19를 접종하여 사일리지의 사 료가치, 품질 및 미생물상의 변화를 조사하였다. 호밀 사일 리지에서 젖산균 접종구와 무접종구에서 사료가치는 크게 변화되지 않았다. 그리고 유산 함량은 젖산균 접종구가 현 저하게 높은 경향을 보였으나 초산과 낙산은 젖산균 접종 구가 약간 낮아지는 경향을 보였다. 젖산균 분포는 젖산균 접종구에서 현저하게 높았으며 효모와 곰팡이는 104CFU/g 에서 관찰되지 않았다. 호밀 사일리지 제조시 KCC-10 및 KCC-19 접종구의 조단백질 및 TDN 함량은 무접종구 보 다 약간 증가하였으나 섬유소 및 in vitro 건물소화율에서 는 비슷한 수준을 보였다. 이상의 결과를 요약해 보면 호 밀 사일리지 제조시 KCC-10 및 KCC-19 접종에 의해 사일 리지의 품질이 향상되었다.

An investigation was carried out to evaluate the potential role of Lactobacillus Plantarum KCC-10 and KCC-19 on the quality and fermentation characterization of Italian ryegrass (IRG) silages. The physiochemical properties of IRG silage such as crude protein content, neutral detergent fiber, acid detergent fiber, total digestible nutrient and in vitro dry matter digestibility were not affected by KCC-10 and KCC-19. The pH of IRG silage in KCC-10 and KCC-19 treatments decreased compared to the control (p<0.05), while the lactic acid content in KCC-10 and KCC-19 treatments increased compared to the control (p<0.05). In addition, the number of lactic acid bacteria (LAB) in the KCC-10 treatment increased compared to the control (p<0.05). The number of lactic acid bacteria in KCC-19 increased, but there was no significant difference in all treatments. Therefore, we recommend L. plantarum KCC-10 and KCC-19 as potential additive candidates in IRG silage with lots of advantages.