Since ships are exposed to noise and vibration for a long time in seas isolated from land, the stress of workers is high, requiring studies on the improvement of the problem. In addition, the health of crew members on fishing vessels, unlike commercial ships, carrying out fishing activities is closely related to fishing performance. However, considering that most of IMO's guidelines apply to merchant ships, provisions should be made for vibration in accommodation areas of fishing vessels. Accordingly, this study, applying the revised ISO 20283-5:2016 standard and through experiment, investigated the vibration characteristics of the accommodation area for each operating conditions of a 1000-ton trawler fishing vessel. Within the scope of the study and the full-ahead mode, the vibration was highest in the engine control room (4.17mm/s) while the acceptable standard was satisfied sufficiently in all conditions. Application of the merchant vessel vibration standard to fishing vessel is expected to improve the working environment of fishing vessel crew members.

For scientific research, a number of acoustic surveys using commercial echosounders equipped in fishing vessels were conducted throughout the world; however, few studies were performed in South Korea. Hence, this research is an preliminary study for presenting the application of a sounder from a fishing vessel. The fishing operations using a pair trawler (7 Cheonghae) was conducted in the Northwest-Western sea of Jeju Island from 20 to 23 April, 2016. Substantial impulse noises and attenuated signals were eliminated by the latest algorithms. Acoustic signals were grouped into the fish aggregations and long layer-like signals. The fish aggregations appeared between 30 and 60 m, and long layer-like signals showed the diurnal vertical migration. Energetic, morphological and positional properties of the fish aggregations and layer-like signals were described. The fish aggregations appeared mainly between sunrise and sunset; however layer-like signals tended to be presented regardless of time in consideration of the time series analysis. On the basis of the consignment sales, Scomberomorus niphonius, the target species of F/V 7 Cheonghae, was the highest catch with 4,280 kg (74.6%) and might have appeared in fish aggregations and layer forms.

The aim of this research was to the experimental data using statistical and spectral analyzing method to get the motion reponses of a stern trawler in operation states such as drifting, sailing and trawling according to the wave height. In drifting, the significant and the maximum valuer of roll in beam sea increased according to the wave height, but those of pitch decreased. The response and the period of peak of roll in beam sea were increased, but those of pitch decreased. In navigation, the significant and maximum values of roll increased remarkably according to the wave height, but those of pitch changed a little. The response of roll was highest in quartering sea, beam sea and then following sea, but those of pitch was highest in bow sea, head sea and then beam sea in the order of all wave heights. The period of peak of roll due to the wave height and the wave direction changed from 3.8 to 9.9 seconds, and those of pitch changed from 3.3 to 10.4 seconds. In trawling, the significant and maximum values of roll increased a little according to the wave height, but those of pitch increased significantly. The response of roll was highest in beam sea, bow sea and then quartering sea, but those of pitch was highest in head sea, following sea, and then beam sea in the order. The period of peak of roll due to the wave height and the direction changed from 6.6 to 10.9 seconds, and those of pitch changed from 6.7 to 11.2 seconds.

The trawl fishery is an important fishery accounting for around 30.0% of adjacent water fishery production in Korea, and the commercial fishing is associated with high rate of fatal and non-fatal occupational injury. The hazard analysis for the fishermen's safety of offshore trawler was conducted to serve as basic data for improving the healthy and safe working environment of fishermen using fishermen's occupational accidents of the national federation of fisheries cooperatives (NFFC) from 2012 to 2014 (n=464). As a result, the occupational accident occurrence rate of large powered trawl fishery was 241.4‰ in east sea trawl fishery, 6.9 times the rate of that. In addition, death and missing rate was found to have very serious level management to 97.7‱ in east sea trawl fishery of death at 6.2 times. The accident occurred in 91.7 to 100.0% was happened at sea. The slipping, others and struck by object and son on occurred more frequently in order in the frequency of accident occurrence pattern. However, the occurrence rate of death and missing did not match the frequency of accident pattern. In other words, slipping occurred more frequently while death and missing risk was not high. The fall in the waters was low while death and missing risk was high. The results are expected to help identify and assess safety hazard occurred in offshore trawlers.

Trawlers are divided into stern and side types by the method of shooting and hauling net, but the latter is difficult to find beside Korea. In East Sea of Korea, the side type used to be in early 2000’s, but it improved to stern type because of its inefficient operating method. The aims of this paper is to make clear the stability of the side trawler in the East Sea, and then confirm whether it satisfy the IMO rule or not, the degree of the transverse inclining angle of the ship when hauling net at hull side. In results, the stability of the ship in initial inclining range satisfied the IMO rule and the domestic rule, but not satisfied those rule in over the range. The limit load of the ship that was coincide with the angle of beam end in hauling net at side was about 26 tons, 18 tons in normal sea condition and storm warning condition respectively. The transverse inclining angles of the ship in hauling net were much higher from 3.3 to 5.5 times than the longitudinal inclining angle of the stern trawler, although those angles were slightly changed with depending on the loading and sea condition.

For providing a basic data concerning with a fishing deck layout design of a trawler the authors conducted the video observations about the working activities of crews on the deck in the different layout of two Korean coastal large stern trawlers (gross tonnage: 139). The winch of the trawler-A was installed on the aft of the fishing deck and the trawler-B, on the forward of the fishing deck. The work and activities of the deck hands on both trawlers were observed using the CCD (charge coupled device) camera installed on each trawler's deck for one month from August 3, 2010. The video data was analyzed by the hierarchical task analysis (HTA) method. In results, numbers of tasks to require deck hands during the hauling net and the casting net were 25 and 28 for the trawler-A and 27 and 48 for the trawler-B, respectively. The working processes were represented a same in both of the trawlers. Location for controlling the deck machineries, the location installed trawl winch, kinds of deck machineries, crew's custom for using deck machineries were the factor affecting to the number of the task. In the case of the improvement suggested in the results is carried out, the reduction percentages of the number of task in the trawler-A and trawler-B were estimated as 24.5% and 51.3%, respectively. Through this study it was found that the quantitative analysis is possible for the work processes, work methods and the work contents in the trawler. Also the suggestion for improving the fishing deck layout design of the trawler was possible by finding out the factors increasing the number of tasks and removing the tasks. We expect that the results of this paper are used as a basic data for designing the layout of deck machineries in the trawler in the future.

To suggest a standard concerning with the arrangement of bridge equipment, the authors conducted the video observations with 3CCD (charge coupled device) cameras installed on the ceil of the bridge for monitoring the working activities of two bridge teams (the skipper/mate1 and the skipper/mate2) in a Korean coastal large trawler(gross tonnage: 139) for five days from July 30th. 2010 and analyzed of the data. Work elements coded by the work activities were input on the sheet of work analysis by the time unit of 1 sec according to the time occurred. A single work element among the work activities for every 5 minutes was denoted as the number of occurrence. The frequency of equipment usage was limited only in the usage of the equipment. In the case of the navigation and the towing net two ranks were integrated and analyzed. On the other hand, in the case of the casting net and the hauling net, two processes were integrated to as one and then analyzed separately as two ranks. As the results, 15 elements of work was carried out between two bridge teams for the observation; lookout, radar, GPS plotter, fish finder, net monitor, fishing deck, RPM indicator, rudder angle indicator, compass card, for maneuver; steering, ship speed control, trawl winch operation and external communications, paper works and others. It was found that the work load of the skipper per 5 minutes accordance with the navigation, the casting net, the towing net and the hauling net are 20.5 times, 11.9 times, 38.0 times and 9.5 times respectively, the mates are 65.2 times, 66.5 times, 85.7 times and 59.1 times respectively. The radar was shown the highest frequency of the equipment usage and the next was the fish finder, the GPS plotter and the external communications in the case of the navigation. In the case of the towing net the frequency of usage was high the ranking as the radar, the net monitor, the fish finder, the GPS plotter, the steering system and the external communications. In the case of the integrated process both of the casting and hauling net the trawl winch was shown the highest frequency to the skipper and the next was the GPS plotter and the radar, and the steering system was shown the highest frequency to the mate and the next was the radar, the ship speed control system, the GPS plotter, the net monitor and the fish finder.

Fishing efficiency of a trawl vessel can be enhanced by increasing the swept area per unit time, which can be attained either by increasing the mouth size of the net, or by increasing the towing speed. To improve fishing and fuel efficiency of trawl vessels targeting fishes of greater mobility, in which the towing speed is more critical in determining fishing efficiency, we conducted a series of model tests to evaluate the performance of the newly-designed nozzle propeller before installing it in a trawl vessel to verify its towing speed and fuel efficiency in the sea. By conducting further model tests in the experimental basin, we redesigned the propeller of stern trawler to improve the resistance and propulsion performance. Through actual fishing operations, we evaluated the improvement in fuel and fishing efficiency by installing the new nozzle propeller. The trawling speed increased by 0.6kts at the same engine power (RPM), while the engine margin increased by more than 20%. The increased towing speed by installing the redesigned propeller is expected to enhance fishing performance through increasing the number of hauling- and casting operations per unit times, while shortening the towing duration. Analysis of the Catch-Per-Unit-Effort (CPUE) data indicated that the mean CPUE of trawl fishery increased from 3.04kg/m in year 2007 to 6.15kg/m in year 2008, confirming enhanced fishing efficiency by adopting the redesigned propeller.

Trawlers have to a sufficient towing force due to it's characteristics of the high performance. The newly constructed trawler with the conventional propellers shows the sufficient towing force, so that the propeller and engine are optimized. In the 1970s, many trawlers were imported from overseas by Korean fisheries industries. But the engine output degradation with year by year caused the trawlers to decrease the towing speed of the vessels. On the previous studies, the nozzle propeller had not so good efficiency with increasing of resistance in high-speed cruising operation over 15knots. But the trawling operation is just required the higher thrust and towing force, so that the nozzle propeller is very profitable for the it's effectiveness. A new nozzle propeller was designed for the 4,462G/T trawler, Dong-San, operated by Dongwon Industries Co., Ltd. to improve the towing speed, and the model tests were performed. The model ship and model propeller are preciously manufactured and used model tests in basin. The resistance test and propeller open water test were performed for the cases of the half and full loads. The required engine horse power and RPM were evaluated analytically by the speed-power curve, when the trawler was equipped with the nozzle propeller. The results of tests showed that the towing speed 4.85knots on the design load waterline requires the 200 engine RPM and 2,567ps in the delivered horsepower.

실해상 실험을 통하여 해상의 조건이 동일할 때, 예망과 항해중일 때의 만남파에 대한 소형 트롤어선의 종동요와 횡동요의 응답특성을 통계적 방법과 이론적인 방법을 이용하여 분석하였다. 그 결과를 요약하면 다음과 같다. (1) 종동요의 응답 크기를 예망중과 항해중에 따라 비교하면 큰 차이가 없으나, 선수쪽에서 파를 받을 경우에는 항해중의 응답이 예망중 보다 양각 커지는 경향이 있다. (2) 횡동요의 응답은 예망중과 항해중 모두 종동요에 비해 매우 크다. 그러한 경향은 모든파향에서 현저하지만, 횡파를 받을 경우에는 양자의 응답 차이는 줄어든다. (3) 예망중과 항해중 모두 종동요에서 응답스펙트럼의 peak가 나타나는 주기는 파향에 관계없이 거의 일정하다. (4) 선미쪽에서 파를 받고 예망할 때, 양현에 균등하게 warp의 힘이 작용한다면, 어구의 저항은 동요를 감쇄시키는 상당한 효과가 있다.

This paper deals with an experimental study on the dynamical characteristics of ship motion during trawling job on the real sea. The experiments were carried out on the small stern trawler, and roll and pitch motion of the ship according to the wave directions were simultaneously recorded by P/C in the same sea conditions. From these data, the statistical properties and power spectra were obtained, and then the analysis of ship motion in trwal job was made. As a result, it was found that the pitch motions in trwal job were displayed low amplitudes on the whole, but the rolling motions were displayed high amplitudes relatively, and very high value on the beam and quartering sea especially. Also, the trial ship has a high extinction coefficient in the roll motion, compared with the rule of stability, but when wave height takes 2.5m over, it can induce the safety of ship to scare occasionally. Therefore, a usefull countermeasure for the safety of ship has to be made adequately.

끌그물로부터 탈출한 소형어류의 생존율을 향상시킬 수 있는 자원관리형 어구어법을 개발하기 위한 기초 조사로서, 트롤망에서 양망 후 투기되는 어류의 생존율을 조사하기 위한 시험조업이 한국 남해안 및 제주도 근해에서 이루어졌다. 트롤망의 끝자루를 탈출한 소형어류를 선내에 비치된 사육수조에 수용하여 시간대별로 생존지속 시간을 조사하였다. 그 결과를 요약하면 다음과 같다. 1. 트롤 어구로부터 어획된 어류를 선상에 비치된 사육수조에 넣어 생존율을 조사한 결과 살오징어, 한치, 갈치, 달고기, 삼치, 참조기 및 눈볼대등 대부분의 어종은 양망후 즉시 사망하였다. 2 두툽상어, 붕장, 가오리, 말쥐치, 부채새우 등은 수조내에서 장시간 생존하였으므로 이들 어종은 투기된 후에 생존할 확률이 높을 것으로 생각된다. 3. 탈출장치를 빠져나온 등가시치는 수조에 수용된지 6 시간 이내에 전부 사망하였으나,97% 의 두툽상어와 72% 의 붕장어는 72시간 이상 생존하였다. 4. 끝자루를 빠져나온 가오리는 수조에 수용된지 60시간 이내에 모두 사망하였으나, 25% 의 말쥐치와 문어는 72시간 이상 생존하였다. 5. 홍감팽의 경우 탈출장치와 끝자루를 빠져나온 개체간의 생존율을 비교해보면, 끝자루를 빠져나온 홍감팽은 72 시간 이내에 전부 사망하였으나, 탈출장치를 빠져나온 것의 8.3%는 72시간 이상 생존하는 것을 보여줌으로서, 탈출장치를 빠져나온 개체의 생존율이 다소 높은 것을 보여주었다. 6. 그러나 부채새우의 경우를 비교해 보면, 끝자루를 탈출한 새우의 생존율이 75%로서 탈출장치를 빠져나온 부채새우의 생존율 33% 보다 훨씬 높게 나타났다. 따라서, 탈출후의 어종별 생존 특성에 대해서 보다 많은 연구가 필요할 것으로 본다.구면적은 유속이 증가함에 따라 지수함수적으로 감소하는 경향을 보였으며, 망구면적의 감소율은 기준형보다 무부자망이 더 작게 나타났다. 여과량은 유속이 증가함에 따라 로그함수적인 경향을 보였으며 기준형이 3.0knot 이상에서 급격히 감소하였지만, 무부자망은 4.0knot까지 증가하였다가 완만하게 감소하였다. 5. dL의 최대적정길이는 망구면적 및 여과량이 최대인 30m일 때이며, 추의 최적위치는 4개의 그물목줄이 연결되는 지점이었다.times〈/TEX〉101 CFU/mL로 감소되었으며, 48시간 배양하였을 때에는 생육이 완전히 억제되었다. 그리고 1.24×105 CFU/mL 수준의 Sta. aureus를 접종한 경우 24시간 배양 후 아주 미약한 생존 균수의 감소를 보였으나 48시간 배양시 4.00×102∼8.50×102 CFU/mL 수준으로 감소하였고, Sal. enteritidis를 1.81×105 CFU/mL 수준으로 접종한 경우 24시간 배양 후부터 전연 증식을 나타내지 않았다. 이와 같이 오미자 물 추출액 첨가에 의해 drink yoghurt 내에서 식중독 유발균들의 증균 억제 효과를 확인할 수 있었다.할 수 있었다.4.9% (1.39×104 cfu/mL)분포하고 있는 것으로 동정되었다.bamboo weir, the eddy out of the left wing was co

저층트롤 실물 어구를 이용한 해상 실험을 통하여 예망 중인 어구의 망구 형태에 관련되는 전개판의 간격 및 망고 등을 예망 속도별, 끌줄의 길이별로 측정하고, 이론적인 수치 해석 결과와 비교하여 실물어구의 수중 현황을 해석함으로서 어구의 효율적인 운용과 어획효과의 증대를 위한 기초자료를 제공하고자 한다. 수중 현황을 해석한 결과를 요약하면 다음과 같다. 1. 전개판의 전개간격은 예망 속도와 끌줄길이의 증가에 따라 직선적으로 증가하며 끌줄 길이에 의한 증가율이 예망 속도에 의한 증가율보다 현저히 크게 나타났으며, 그 간격의 변화는 57.0∼82.8m로서 후릿줄과 그물목줄 및 그물길이 전체의 43∼62%를 차지하였다. 2. 망구의 높이는 예망 속도와 끌줄길이의 증가에 따라 직선적으로 감소하며, 예망 속도에 의한 감소율이 끌줄 길이에 의한 감소율보다 현저히 크게 나타났는데 그 높이의 변화는 3.1∼4.0m로 나타났다. 3. 양 날개끝의 간격이 커지면 망고는 낮아지나 끌줄 길이가 증가할수록 날개 끝 간격의 증가에 대한 망구 높이 감소율의 비는 점차 작아졌다. 4. 망고에 대한 양 날개 끝 간격의 비는 예망속도와 끌줄 길이의 증가에 따라 점차 커졌는데, 그 비는 4.17∼7.81로 나타났다.

본 연구는 실습선에서 사용 중인 6폭짜리 저층트롤 어구의 저항을 끌줄의 길이와 예망 속도별로 분석하기 위하여 그물의 저항과 전개판의 저항을 계측하고, 어구의 저항계수를 산정하였으며, 그 결과를 요약하면 다음과 같다. 1. 시험 어구의 저항은 끌줄의 길이가 길수록 증가하나, 저항 R§ubt-w/=3800v2으로 대표할 수 있다. 2. 그물 어구의 저항은 끌줄의 길이에 따라 다소 증가하나, 그물 어구의 저항 R§ubn/=10R§ubn/=10d/lλ§uba/λ§ubb/v1.3/의 식으로 대표할 수 있다. 3. 시험 어구의 전개판의 저항 R§ubb/=1810v0.8/으로 대표할 수 있다. 4. 끌줄의 길이별로 측정된 저항값과 Koyama의 저항식과 비교하면, 예망속도가 작을 때는 시험 어구의 저항이, 예망속도가 클 때는 Koyama의 저항식에 의한 저항값이 크게 나타났다.

The slipway, which is one of stern construction, is necessary for stern trawler to let fishing implements, such as fishing net, otter board and warp, go out effectively. It may be doubtable whether there is any possibility for deckwetness to occur because the slipway is obliquely in contact with sea surface. The author discusses any possibility for deckwetness through slipway of stern trawler in wind and waves. A 350 G/T class, ocean-going stern trawler is adopted for the present study. The stem trawler is particularly assumed to drift with fishing implements hung down the slipway due to internal or external accident during fishing operation in real sea. The author considers two factors as possibility for deckwetness to occur through slipway. One is mooring effect of fishing implements hung down the slipway under wind pressure, and the other is relative ship motion in vertical direction in waves. Through the numerical calculation, the author clarifies that there is thin possibility for deckwetness to occur from above two points of view.

군산대학교 실습선 해림 3호의 조종성능을 파악하기 n이하여 GPS 보다 그 측립정도가 더 높은 DGPS를 이용하여 종회권 측정을 행하고, 이를 재래식 측정방법인 부표방입반법과 비교 검토하였으며, 그 결과를 요약하면 다음과 같다. 1. DGPS에 의한 선회권측정의 정도를 파악하기 위하여 육상에서 50m의 선회시험을 행한 결과 측위오차는 1.5m 이내 였다. 2. DGPS에 의한 선회권측정은 속력별, 타각별, 좌우선회별로 각각 그 특성이 잘 나타낼 수 있도록 정확하게 측정 할 수 있었다. 3. 부표방위반법에 의한 선회권측정은 타각을 크게 하여 그 선회권이 작을 때는 DGPS의 것과 같이 비교적 정확하게 측정할 수 있으나, 타각을 작게하여 선회권이 클 때는 방위오차가 크기 때문에 정확하게 측정할 수 없었다. 4. DGPS에 의한 해림 3호의 선회경(DT)은 타각 35。~5。일 때, 미속에서는 선박의 수선간장 (Lpp)상의 2.6~15.0배, 반속에서는 2.8~16.6배, 전속에서는 3.1~17.4배로 나타났었고, 부표방위반법에 의한 선회경은 각각 2.4~9.5배, 2.6~9.6배, 3.2~12.2배로 나타났었다

실험선 제주 402호의 조종성능을 전속전진중 최대타각으로 전타한 때의 선회권측정과 10˚, 20˚, 30˚Z시험에서 산출된 조종성지수를 분석, 검토한 결과를 요약하면 다음과 같다. 1. 선회종거는 우현선회시가 79.1m로 배의 길이의 약 2.6배였으며, 좌현선회시는 81.4m로서 배의 길이의 약 2.7배였다. 또, 선회경은 배의 길이의 약 2.6배로서 우현선회시가 78.3m로서 좌현선회시 80.4m보다 작았다. 2. 선회권시험시 속력저감율은 0.49였으며, 평균선회각속도는 우현선회시가 4.3˚/sec, 좌현선회시는 4˚/sec이었다. 3. Z시험 결과 over shot angle은 우현전타시가 좌현전타시보다 더 컸으며, 좌우타전타시의 평균값은 10˚Z시험시가 10.5˚, 20˚Z시험시가 20.5˚, 30˚Z시험시가 29.5˚로 다소 큰 편이었다. 4. 10˚, 20˚, 30˚Z시험에서 K' 및 T'의 값은 각각 0.755, 0.566, 0.481 및 3.468, 1.621, 1.547로서 대체적으로 선회성은 대각도 전타 일수록 나쁘거나, 추종성은 대각도 전타 일 수 록 좋았다.