As various accidents have occurred in underground spaces, we aim to improve the quality validation standards and methods as specified in the Regulations on Producing Integrated Map of Underground Spaces devised by the Ministry of Land, Infrastructure and Transport of the Republic of Korea for a high-quality integrated map of underground spaces. Specifically, we propose measures to improve the quality assurance of pipeline-type underground facilities, the so-called life lines given their importance for citizens’ daily activities and their highest risk of accident among the 16 types of underground facilities. After implementing quality validation software based on the developed quality validation standards, the adequacy of the validation standards was demonstrated by testing using data from two-dimensional water supply facilities in some areas of Busan, Korea. This paper has great significance in that it has laid the foundation for reducing the time and manpower required for data quality inspection and improving data quality reliability by improving current quality validation standards and developing technologies that can automatically extract errors through software.

The effects of punching treatment on mycelial culture and fruiting body productivity were investigated in a new Lentinula edodes cultivar, “Jadam”, in sawdust medium for the stable production of oak mushroom. As the punching volume and number increased, the weight loss rate and color difference increased and the L value decreased. After spawn inoculation, the sawdust medium temperature and CO2 concentration reached their highest values at 33 and 19 days of incubation, respectively. The O2 concentration showed the lowest value on the 14th day of incubation, which was the opposite pattern to the CO2 concentration. As the punching volume and the number increased, the medium temperature and O2 concentration increased, and the CO2 concentration decreased. Higher punching volumes and numbers resulted in higher temperatures and lower CO2 concentrations. The best fruiting body yield was 5 × 70 mm - 30 (punching diameter × depth - number), and the total yield after three cycles was 644.7 g.

본 연구에서는 뇌혈류 신호를 측정할 수 있는 시변자계 기반의 비접촉식 직물센서를 설계하여 뇌혈류 신호 검출 및 감성평가의 가능성을 탐색하고자 하였다. 직물센서는 40 denier의 은사를 30합사 한 후 컴퓨터 기계 자수하여 코일 형 센서로 구현하였다. 뇌혈류 측정 실험을 위해 코일형 센서를 경동맥 부위에 부착하고, ECG (Electrocardiogram) 전극과 RSP (Respiration) 측정 벨트를 부착 및 착용하도록 하였으며, 동시에 초음파 진단기기를 사용해 도플러 초음 파 검사(Doppler Ultrasonography)를 수행하여 혈류 속도를 측정하였다. 피험자에게 Meta Quest 2를 착용시키고, 실 험을 위해 조작된 영상 시각 자극을 보여주면서 혈류 신호를 측정한 후 시각 자극에 대한 감성평가 설문지를 작성하 도록 하였다. 측정 결과, 도플러 초음파 검사를 통해 측정된 혈류 속도 신호에 변화가 생길 때 직물센서로 측정한 신호도 함께 변화하는 것으로 나타났다. 이를 통해 코일형 직물센서를 이용하여 뇌혈류활동 신호를 측정할 수 있다 는 것을 검증하였다. 또한, 감성평가를 위하여 ECG 신호와 PLL 신호(직물센서 신호)에서 추출한 HRV를 계산해서 비교한 결과, 시각 자극으로 인한 교감신경계와 부교감신경계의 활성화에 따른 비율의 변화에 대해서는 직물센서로 측정한 신호와 ECG 신호를 이용해 계산한 값이 비슷한 경향을 보이는 것으로 나타났다. 결론적으로, 본 연구에서 개발된 시변자계 기반의 코일형 직물 센서를 통해 뇌혈류 변화 측정 및 감성 모니터링이 가능할 것으로 사료된다.

도시화 압력이 심화되면서 전통마을의 축적된 고유의 주거건축 기법과 관련된 경험, 방법, 창조적 지 혜, 그리고 건전한 삶의 방식도 함께 쇠퇴하고 있음은 매우 안타까운 현상이다. 본 연구는 중국 주하이 시 탕자완(唐家灣)지역의 전통마을 생활환경을 개선하고 마을 지역의 저탄소 운영을 실현하기 위한 ‘향촌진흥 전략’의 촉진을 목표로 한다. 영남(嶺南) 민가 주거용 건물의 기후 적응성에 주목하여 통풍과 단열 개선 그리고 태풍 위협에 대한 저감기법을 중심으로 개선방안을 제안한다. 이를 실현하기 위해 본 연구에서는 VIRVIL과 HTB2 컴퓨터 시뮬레이션 분석기법을 결합하여 3개 민가 유형별 기후 적응공 간 개선방법을 논의함으로써 전통마을 주거환경의 구조적 변화와 에너지 소비 증가로 인한 주거환경 의 쾌적성을 극대화하기 위한 기술 및 운영개념을 제시하였다. 전통마을의 패턴과 건축 디자인 방안을 모색한 본 연구가 향후 전통마을의 생태기능을 유지하면서도 지속가능한 발전을 도모하는 데 유효한 공간 형태별 기후적응성을 실현하기 위한 기초자료로써 의의가 있다.

The purpose of this study is to construct a regional-sector-fishery-offshore and inshore fishery competitiveness index, examine the types and changes of competitiveness, and derive implications by processing data of the Survey on the Current Status of Offshore and Inshore Fishery from 2013 to 2020 for this study. The main results of this study can be summarized as follows. First, considering the competitiveness of offshore and inshore fishery by region and year, Jeonnam, Jeju, and Incheon were relatively competitive. Second, considering the competitiveness of inshore fishery by region and year, we found that Jeonnam, Chungnam, Jeonbuk, and Jeju were relatively competitive. Third, looking at the types of competitiveness based on the competitiveness index in the management sector of offshore and inshore fisheries by region and year, Ulsan, Jeonnam, and Gyeongbuk were relatively competitive between 2014 and 2020. Fourth, Jeonnam and Jeju were relatively competitive between 2014 and 2020 based on the competitiveness index in the fishing sector of offshore and inshore fisheries by region and year. Fifth, we found that Jeonnam, Jeju, and Chungnam were relatively strong in the competitiveness of offshore and inshore fishery, combining the offshore and inshore fishery indexes by region and year. The results of this study have some limitation on outlier treatment, grade assignment, and weight for aggregation, so research considering these needs to be done in the future. In conclusion, the results of this study which were derived objectively and scientifically in the era of the 4th industrial revolution, when evidence-based decision-making was becoming critical, are expected to help the central or local governments determine the priority of support projects or investments.

In this study, a conjoint analysis was conducted to derive a combination of fishing quota management system by fish species preferred by fishermen. In the analysis, detailed levels were set according to each attribute of the system. For analysis, this study conducted a design question survey for conjoint analysis on 303 fishermen engaged in fishing activities in the offshore and coastal sea. The Conjoint analysis was conducted on all fishermen, offshore fishermen and coastal fishermen. In addition, an analysis was conducted on TAC system participants and non-TAC system participants, and the targets were classified for comparison according to the characteristics of fishermen. Fishermen’s preference for the system confirmed for six attribute (“catching fish even if there is no fishing quota”, “how to allocate fishing quota”, “fishing quota management agency”, “upper limit of fishing quota,” “Possibility of Trading in the Fishing Quota”, and “Application of Other Regulations.”) and the detailed level of each attribute. As a result of the analysis of the importance of attributes, fishermen thought that “fishing quota management agency (24.1%)” was very important, and “catching fish even if there is no fishing quota (23.9%)” and “how to allocate fishing quotas (22.9%)” were also given some importance.

LNG propulsion ships are actively being built as an eco-friendly fuel for ships, and ships with C-type LNG tanks are being widely built. In order to analyze the risk of LNG venting from operating ships and test-run ships, the flow characteristics according to operating conditions were reviewed using ANSYS FLUENT, a computational fluid dynamics (CFD) software. As a result of the study, it was confirmed that the distribution area exceeding the lower explosion limit of natural gas and the area where the natural gas temperature rose to 17 ° C had similarities. In addition, it was confirmed that the change in the horizontal direction was greater than the change in the vertical direction when the natural gas distribution range was changed. Since the valve opening has a greater effect than the tank pressure, if natural gas must be vented to the atmosphere inevitably, the risk can be reduced by operating the valve opening at 50% or less.

The thermoelectric effect, which converts waste heat into electricity, holds promise as a renewable energy technology. Recently, bismuth telluride (Bi2Te3)-based alloys are being recognized as important materials for practical applications in the temperature range from room temperature to 500 K. However, conventional sintering processes impose limitations on shape-changeable and tailorable Bi2Te3 materials. To overcome these issues, three-dimensional (3D) printing (additive manufacturing) is being adopted. Although some research results have been reported, relatively few studies on 3D printed thermoelectric materials are being carried out. In this study, we utilize extrusion 3D printing to manufacture n-type Bi1.7Sb0.3Te3 (N-BST). The ink is produced without using organic binders, which could negatively influence its thermoelectric properties. Furthermore, we introduce graphene oxide (GO) at the crystal interface to enhance the electrical properties. The formed N-BST composites exhibit significantly improved electrical conductivity and a higher Seebeck coefficient as the GO content increases. Therefore, we propose that the combination of the extrusion 3D printing process (Direct Ink Writing, DIW) and the incorporation of GO into N-BST offers a convenient and effective approach for achieving higher thermoelectric efficiency.

횡하중에 작용하는 철근 콘크리트 기둥은 연성능력 확보를 위해 띠철근의 양 단부를 135° 구부려 시공하는 상세가 요구된다. 그러 나 이러한 띠철근 상세는 시공이 매우 까다로와 실제 현장에서는 제대로 시공이 되지 않기도 한다. 이를 대체하기 위해 본 논문에서는 강재 클립형 연결장치가 적용된 철근 콘크리트 기둥에 대해 횡방향 반복가력 실험을 수행하고 그 구조적 성능을 평가하였다. 총 4개 의 실험체가 제작되었으며 주요 실험변수는 강재 클립형 연결장치 및 고강도 콘크리트 사용 여부이다. 또한 대상 구조물에 대해 3차 원 유한요소해석 모델을 개발하고 이에 대한 비선형 해석을 수행하였으며, 해석 및 실험결과를 비교하고 분석하였다. 그 결과 강재 클 립형 연결장치가 설치된 콘크리트 기둥이 반복 횡하중에 대해 기존의 표준갈고리 상세를 지닌 콘크리트 기둥과 동등한 혹은 그 이상 의 성능을 지니고 있으며, 개발된 유한요소해석 모델이 실험결과를 정확히 잘 예측하는 것으로 나타났다.

1996년 고성산불지역의 복원유형별 식생구조와 종다양도 변화를 파악하여 생태적 관점에서 복원의 효과를 정략적으로 평가하고자 자연복원지와 인공복원지로 구분한 영구조사지를 대상으로 매목조사와 군집분류를 수행하였다. 조사구 26개소를 대상으로 이원지표종분석(TWINSPAN)과 DCA분석을 통해 분류한 결과, 군집 I (신갈나무-굴참나무 군집), 군집 II (소나무군집) 2개의 군집으로 분류되었다. 군집 별 상대우점치 분석 결과, 군집 I은 굴참나무와 신갈나무가 우세한 가운데 졸참나무의 출현으로 참나무류 간의 경쟁이 예상된다. 군집 II는 소나무가 우점하는 가운데 잣나무가 출현하는 군집으로 소나무 군집이 유지될 것이나 향후 아교목층의 참나무류와의 경쟁이 예상된다. 군집 간 유사도지수는 32.31%로 나타났다. 종다양도지수는 군집Ⅱ에서 1.3940으로 군집Ⅰ의 1.0768보다 높은 것으로 나타났다. 자연복원지는 활엽수 중심으로 맹아 재생이 일어나 군집 I과 같은 참나무림으로 천이가 진행되었다. 인공복원지는 지속적인 관리로 인해 개체수는 줄었으나 생육공간 확보로 자연복원지보다 원활한 직경생장을 보이며 초기 식재종 중심의 군집으로 천이가 진행되고 있음을 확인하였다.

Protein can be provided by cultivating various microbes, which contain more than 30% protein content by cell dry weight. This study compared intracellular protein concentrations of various wild-type yeasts from different sources to select the best yeast strain with high protein concentration. Among them, Saccharomyces cerevisiae KCCM 34709, used for molasses fermentation, exhibited 4.1-fold higher protein concentration than a laboratory yeast strain, S. cerevisiae D452-2. In this study, an approach consisting of random mutagenesis coupled with the Bradford protein assay-based screening method was applied to enhance the S. cerevisiae KCCM 34709 protein content. Among 1,000 mutants, the #180 mutant strain produced 5,041±519 mg/L total amino acid in 48 h, which was 31% higher than the parental S. cerevisiae KCCM 34709 strain. These results demonstrate that the #180 mutant strain can be an attractive cell factory for animal-free protein production.

PURPOSES : The primary objective of this study is to analyze the relationship between the factors that affect traffic incident duration in the mainline, tunnel, and ramp segments of an expressway. In addition, this study derived the most suitable statistical prediction model based on various incident duration distributions. METHODS : South Korean expressway crash data for 11 years, from 2011 to 2021, were analyzed. The incident durations on the mainline, tunnel, and ramp segments were selected using the accelerated failure time model, which is a parametric survival analysis approach. RESULTS : The mainline segment showed that the incident duration increased during accidents, including guard pipe collisions, multivehicle collisions, and snowfall. In particular, collisions in a tunnel with shoulder facilities increase the incident duration, while decreasing the time in the ramp segment. CONCLUSIONS : The incident duration model for each segment type yielded the most accurate results when applying a log-logistic distribution.

Porous ceramics are used in various industrial applications based on their physical properties, including isolation, storage, and thermal barrier properties. However, traditional manufacturing environments require additional steps to control artificial pores and limit deformities, because they rely on limited molding methods. To overcome this drawback, many studies have recently focused on fabricating porous structures using additive manufacturing techniques. In particular, the binder jet technology enables high porosity and various types of designs, and avoids the limitations of existing manufacturing processes. In this study, we investigated process optimization for manufacturing porous ceramic filters using the binder jet technology. In binder jet technology, the flowability of the powder used as the base material is an important factor, as well as compatibility with the binder in the process and for the final print. Flow agents and secondary binders were used to optimize the flowability and compatibility of the powders. In addition, the effects of the amount of added glass frit, and changes in sintering temperature on the microstructure, porosity and mechanical properties of the final printed product were investigated.

본 연구는 DFT 재배 시스템을 이용한 밀폐형 식물생산시스 템에 MB처리 유무에 따른 상추(Lactuca sativa L.)와 배초향 (Agastache rugosa Kuntze)의 생육과 양액 특성을 조사하기 위해 수행되었다. 상추와 배초향은 밀폐형 식물생산시스템에 서 23일간 재배되었다. MB는 매일 9시, 13시, 17시에 5분씩 16일간 처리하였다. 상추와 배초향의 엽장, 엽폭, 엽면적, 생 체중 및 건물중은 MB처리구에서 대조구에 비해 유의하게 낮 았다. 상추와 배초향의 총 뿌리길이, 뿌리 표면적, 근단 수도 MB처리구에서 유의적으로 낮게 나타났다. 평균 뿌리 직경의 경우, 상추는 처리 간에 차이가 없었으나, 배초향은 MB처리 구에서 유의적으로 굵어 종 간에 차이가 있음을 확인하였다. 본 연구 결과, DFT 방식으로 상추와 배초향을 재배할 때 MB 처리는 비생물적 스트레스를 유발하여 생육을 억제하는 것으 로 나타났다.

The proliferation of service robots has led to a growing concern about the impact of these technological advancements on privacy. Despite the development, quantitative research on the influence mechanism of privacy concerns on service robot adoption intentions is still limited. This research explores the influencing mechanism and boundary conditions of the interaction effect between customer privacy concerns and service type on customers’ service robot adoption intentions.