Attempts to increase the usability of lilies led us to prepare pulverized lily bulbs, which we then added to bread flour to bake white pan bread. The properties of the frozen dough and the quality characteristics of the bread were analyzed. Our experiments showed that the addition of lily powder decreases the viscoelasticity and stability of frozen dough. The absorption rate of the frozen dough was 63.1±0.2% for the control sample, and 66.1±0.1% and 70.9±0.2% for the normally pulverized samples containing 3% and 5% of lily powder, respectively, whereas the absorption rate of the finely pulverized samples tended to increase slightly. The gelatinization results of the frozen dough decreased with the addition of lily powder in terms of the final viscosity, break down, and setback values. Compared to the control sample, the specific volume of the bread products that underwent normal pulverization (5% additive) increased slightly and decreased for the lily bulbs that were finely pulverized (3% additive). The addition of lily powder did not significantly affect the water activity during the storage period of up to 5 days. The hardness of white pan bread increased from 1,948±114.3 to 2,518±154.7 g/㎠ on the first day of storage to 2,571±160.9 to 3,265±147.4 g/㎠ on the 5th day of storage. The hardness was the highest for the 5% sample that underwent normal pulverization, and the samples differed significantly. The longer the storage period, the lower the springness value of the white pan bread became, and this result was most notable for the finely pulverized powder sample. The springness of white pan bread decreased as the amount of lily powder additive and the storage period increased. The sensory test results were excellent in that the appearance, texture, flavor, taste, and overall preference for white pan bread to which 3% of normally crushed lily powder had been added had improved relative to the control sample.

This study was conducted to evaluate the characteristics of bread and the rheology of flour dough containing chlorella powder(0%, 0.5%, 1.0%, 1.5%, 2.0% and 2.5%). In the farinograph test, the addition of chlorella powder changed water absorption, development time and mixing tolerance index for making bread. As the amount of chlorella powder increased, the water absorption increased, mixing tolerance index and the development time decreased. In the extensograph test, the degree of extension and resistance was decreased with increasing of chlorella powder content. In the amylograph test, the maximum viscosity was slightly decreased with increasing of chlorella powder contents. The colors of L value in bread crumb was significantly decreased as the chlorella powder addition. After fermentation treatment, The dough with 2.5% chlorella powder showed the lowest dough raising power compared to the other doughs. The addition of the chlorella powder had significant effect on bread texture. The bread consisting of 0.5% chlorella powder showed the highest volume of loaf and specific volume. Therefore, high quality of bread can be achieved by adding chlorella powder.

In the Anzunbaengi (Triticum aestivum) whole wheat flour mixture group, some herbs (A [white], B [yellow], C [black], D [blue], and E [red]) were added. The physicochemical properties were compared to the strong flour and whole wheat flour mixture groups. The dry gluten content of the control group (strong flour) was 13.5±0.4%, and the content in the whole wheat flour test group was slightly lower in value than the control group. The final viscosity, breakdown, and setback values of the dough were 248.4±0.8, 104.8±0.9, and 103.1±2.9 RVU, respectively. The breakdown was significantly different in the control and whole wheat flour groups. The setback value of the dough was increased by 30 RVU in the whole wheat flour test group compared to the control group by 103.1±2.9 RVU, but there was no significant difference between the test group samples. The consistency of the control dough was 500±10 FU, and the whole wheat flour test group was significantly increased to 585±10~599±10 FU, respectively. The absorption rate was about 2% higher in the whole flour test group than in the control group (66.2±0.3%). The pH of the control paste gradually decreased with fermentation time, and the results of whole wheat flour test group were similar (5.78±0.12~5.88±0.12). As the fermentation time increased, the volume of dough was increased and the result was slightly lower in the whole wheat flour test group than in the control group.

This study was conducted to evaluate the characteristics of bread and the rheology of flour dough containing jochung. In the farinogram test, the addition of jochung changed water absorption, development time and mixing tolerance index for making bread As the amount of jochung increased, the water absorption, mixing tolerance index decreased and the development time increased. In the extensograph test, the degree of extension decreased with increasing of jochung content whereas degree of resistance was enhanced with addition of jochung. After fermentation treatment, the volume of the dough with 20% sucrose were less than that of the dough containing 20% of jochung. The dough with 5% jochung showed the lowest dough raising power compared to the other doughs. The bread consisting of 15% jochung showed the highest volume of loaf and specific volume. Therefore, high quality of bread can be achieved by adding jochung instead of sucrose for making bread.

This study was carried out to estimate the effect of selected inoculants on chemical compositions and fermentation characteristics of rye silage. Rye was harvested at dough stage and divided into 5 treatments, following: No additives (CON); L. plantarum R48-27 (LP27); L. buchneri R4-26 (LB26); Mixture of LP27 and LB26 at 1:1 ratio (MIX); and L. buchneri (LB). The rye forage was ensiled into 10 L bucket silo for 100 days. The contents of NDF and ADF were lowest (P<0.05) in LB26. The pH in LB26, MIX, and LB were lower (P<0.05) than CON and LP27. Lactate content in LB was higher (P<0.05) than the others, while acetate content in LB26 and LB were higher (P<0.05) than that in CON and LP27. Lactate to acetate ratio was highest (P<0.05) in LB, but lowest in LB26. Lactic acid bacteria (LAB) count in LB was higher (P<0.05) than that in CON, while yeast count in CON was lower than in all silages applied inoculants. In conclusion, silages inoculated with LB26 could improve potentially the aerobic stability caused by increases of acetate and propionate concentrations.

This study was conducted to evaluate characteristics of bread and rheology of flour dough containing fructooligosaccharide. In the farinogram test, addition of fructooligosaccharide changed stability and development time. Stability and development time increased as the amount of fructooligosaccharide increased. In the extensograph test, the degree of extension decreased with increasing of fructooligosaccharide content, whereas degree of resistance increased. The volume of the loaf bread containing 10% fructooligosaccharide was the largest, and the bread containing 15% fructooligosaccharide revealed the best taste, flavor, and texture scores. After fermentation treatment, the volume of the dough with 20% of sucrose were less than that of 20% of fructooligosaccharide. Dough with 20% of sucrose revealed lowest dough raising power compared to other doughs. Overall, preference scores by sensory evaluation of bread containing fructooligosaccharide were higher than that of bread with sucrose. Therefore, excellent quality of bread may be achieved by adding fructooligosaccharide instead of sucrose to the process.

This study investigates the quality characteristics of dough and bread added with 6% chestnut shell powder and extruded chestnut shell powder at various conditions. As extrusion process variables, melt temperature (110°C, 130°C, 150°C) and moisture (25% and 30%) were controlled. Total dietary fiber content was slightly increased in extruded chestnut shell powder group. In the farinogram, absorption was significantly increased in the group of 25% moisture content and 30% moisture content (p<0.05). After 2 hours and 3 hours, the leavening heights of dough for control showed a similar tendency to that of dough with extruded chestnut shell at a melt temperature 150°C and with moisture content of 25% and 30%. Specific volume was the highest at a control of 3.74±0.08 cc/g and extruded chestnut shell powder group was slightly higher than the chestnut shell powder group. Firmness after 1 day on control of 107.42±14.52 g was similar to that of the bread with extruded chestnut shell at a temperature of 150°C and moisture content of 25% for 113.33±6.17 g. In conclusion, the extrusion-cooking of chestnut shell powder improved the quality characteristics of dough and bread. The optimum combinations of conditions in tested range were melt temperature at 150°C and moisture content at 25%, and melt temperature at 130°C and moisture content at 30%.

The purpose of this study was to optimize dough properties using response surface methodology (RSM) and to demonstrate the performances of dough prepared under optimized conditions. Dough mixed with yeast, margarine, salt, sugar and wheat flour was prepared by fermentation process. Hardness, cohesiveness and springiness of dough were selected as critical quality attributes. The critical formulations (yeast and water) and process (fermentation time) variables were selected as critical input variables based on preliminary experiment. Box-Behnken design (BBD) was used as RSM. As a result, the quardratic, the squared and the linear model respectively provided the most appropriate fit (R2>90) and had no significant lack of fit (p>0.05) on critical quality attributes (hardness, cohesiveness and springiness). The accurate prediction of dough characteristics was possible from the selected models. It was confirmed by validation that a good correlation was obtained between the actual and predicted values. In conclusion, the methodologies using RSM in this study might be applicable to the optimization of fermented foods containing various wheat flour and yeast.

The purpose of this study was to optimize dough properties using response surface methodology (RSM) and to demonstrate the performances of dough prepared under optimized conditions. Dough mixed with yeast, margarine, salt, sugar and wheat flour was prepared by fermentation process. Hardness, cohesiveness and springiness of dough were selected as critical quality attributes. The critical formulations (yeast and water) and process (fermentation time) variables were selected as critical input variables based on preliminary experiment. Box-Behnken design (BBD) was used as RSM. As a result, the quardratic, the squared and the linear model respectively provided the most appropriate fit (R2>90) and had no significant lack of fit (p>0.05) on critical quality attributes (hardness, cohesiveness and springiness). The accurate prediction of dough characteristics was possible from the selected models. It was confirmed by validation that a good correlation was obtained between the actual and predicted values. In conclusion, the methodologies using RSM in this study might be applicable to the optimization of fermented foods containing various wheat flour and yeast.

This study was conducted with the purpose of investigating the rheological characteristics of noodle flour dough supplementary konjac powder comprising 0%, 0.5%, 1.0%, 1.5% or 2.0% of the total mixture. In farinograph analysis, water absorption increased with the increased content of konjac powder. Both the arrival times and the development times of the dough with added konjac powder were longer than original wheat flour dough. Dough stability was found to be increased as compared to the control, but decreased as konjac powder content was increased. As konjac powder content increased, the resistance of the dough as shown by farinograph data was highest in the original wheat flour dough as 130 BU. Starting temperature, maximum viscosity temperature and maximum viscosity were decreased as shown in amylograph analysis. In extensograph analysis, the dough's extensibility and resistance to extension of the dough decreased as the amount of konjac powder was increased. The ratio of resistance to extensibility (R/E) decreased with the an increase in the amount of konjac powder included in the dough. The dough’s tensile strength after cooking was increased in proportion to the additional amount of konjac powder used.

The effects of mixing speed (3, 6 and 10 speed) and time (2, 5 and 10 min) on the dynamic viscoelasticity of dough and the baking properties of gluten-free rice bread were investigated. The specific gravity of the dough was not affected by the mixing speed and time before and after fermentation. The elasticity (G') and viscosity (G") of the dough increased and the tan δ (G"/G') decreased with higher mixing speeds and longer mixing times. The specific volume of the gluten-free rice bread was affected by the mixing time in response surface methodology (RSM). The hardness of the gluten-free rice bread showed a decreasing trend as the specific volume for the gluten-free rice bread increased. The appearance of the gluten-free rice bread was symmetrical at high mixing speeds and long mixing times. Overall results indicated that the quality of gluten-free rice bread could be improved by controlling the mixing speeds and mixing times for the dough.

초고압 처리에 의한 메밀 반죽의 변화를 반죽의 미세 구조, 열 특성 평가, 조직감 측정을 통하여 확인하였다. 초고압 처리 강도와 시간에 따라 메밀 반죽 내 미세 구조를 관찰 시, 압력의 강도와 처리 시간이 증가함에 따라 전분의 호화가 일어나며 조밀한 구조를 가지게 되었다. 이러한 현상은 메밀 반죽의 조직감에 영향을 미쳐 압력이 증가함에 따라 탄성, 부착성, 씹힘성을 감소시키고 압력 처리 시간을 달리하였을 때 장시간 압력 처리에 따라 탄성, 씹힘성, 검성이 더 높은 값을 가짐을 확인하였다. 면의 끊어짐에 관련된 특성인 인장도는 소비자가 면을 섭취할 때 관능적 품질의 중요한 요소로서, 초고압 처리 시 글루텐을 함유하지 않는 메밀 반죽의 인장성을 나타내는 failure tensile distance를 증가시키는 결과를 얻었다. 따라서 메밀을 비롯한 다른 곡물을 활용한 gluten-free면 제품의 제조 시 초고압공정을 활용할 경우 기존 제품의 단점을 개선할 수 있을 것으로 예상된다.