Effect of sulfation processes on the physicochemical properties of ZrO2 and TiO2 nanoparticles were thoroughly investigated. SO4/ZrO2 and SO4/TiO2 catalysts were synthesized to identify the acidity character of each. The wet impregnation method of ZrO2 and TiO2 nanoparticles was employed using H2SO4 with various concentrations of 0.5, 0.75, and 1 M, followed by calcination at 400, 500, and 600 °C to obtain optimum conditions of the catalyst synthesis process. The highest total acidity was found when using 1 M SO4/ZrO2-500 and 1 M SO4/TiO2-500 catalysts, with total acidity values of 2.642 and 6.920 mmol/ g, respectively. Sulfation increases titania particles via agglomeration. In contrast, sulfation did not practically change the size of zirconia particles. The sulfation process causes color of both catalyst particles to brighten due to the presence of sulfate. There was a decrease in surface area and pore volume of catalysts after sulfation; the materials’ mesoporous structural properties were confirmed. The 1 M SO4/ZrO2 and 1 M SO4/TiO2 catalysts calcined at 500 °C are the best candidate heterogeneous acid catalysts synthesized in thus work.

This study was performed to evaluate the effect of pork belly thickness on physicochemical and sensory characteristics after pan frying. Pork belly with three different thickness (5, 10, 20 mm) from three different parts (A:thoracic vertebrae no. 5-9, B:thoracic vertebrae 10-14, C:lumbar vertebrae 1-6) was pan grilled with electronic grill until it reached an internal temperature of 71℃. Cooking loss, shear force, sensory characteristics, volatile compounds of cooked pork belly were determined. Electric nose analysis was performed to support descriptive analysis and consumer sensory analysis. The cooking loss of pork belly with 20 mm thickness from all positions was significantly low (p<0.05). Shear force increased with increase in thickness (p<0.05). Electric nose identified major seven volatile compounds such as acetonitrile, (Z)-4-heptenal, 2-octanol, linalool, carbon disulfide, methylcyclohexane, n-nonanal to discriminate those samples. The part of pork belly significantly affected the intensity of volatile compounds rather than thickness. In discriminate analysis, the overall acceptability of pork belly (A and B parts) with 20 mm thickness was higher than that of pork belly with 5 mm thickness. In addition, the overall acceptability by consumers for pork belly with 20 mm thickness from A, B, and C parts was higher than the overall acceptability for pork belly with 5 mm thickness. This preliminary study suggests that it is more desirable to use pork belly with 20 mm thickness from part A when cooking on a pan gril compared with pork belly of 10 mm or 20 mm thickness from part B or C in the meat markets and restaurant.

This study investigated the physicochemical and antioxidant properties of sponge cakes made using different amounts (2 and 4%) of barley sprout powder (BSP) and green tea powder (GTP), respectively. The results showed that the baking loss rate of GS2 (2% green tea) and GS4 (4% green tea) was 12.39% and 11.96%, respectively in the green tea addition group, which was higher than that of the barley sprout group, but significantly lower than that of the control group at 13.34% (p<0.05). The specific volumes of the sponge cake containing barley sprout and green tea 2% and 4% were between 2.84- 2.95 mL/g, which was significantly higher compared to the control group at 2.69 mL/g (p<0.05). The sugar content was significantly higher in the control group and the barley sprout addition group at 2.30oBrix (p<0.05). As for the volume index, the control group with the lowest value at 13.43 showed a significant difference compared to the addition groups. The volume index significantly decreased as the addition amount increased, measuring 14.07 in BS4 (4% BSP) compared to 14.87 of BS2 (2% BSP) in the barley sprout group (p<0.05). In cross-sectional photography, the color became darker than that of the control group as the quantum of additives increased. In terms of the DPPH and ABTS radical scavenging activity, the total phenol content, and total flavonoid content, the groups with the addition of barley sprout and green tea showed higher antioxidant activity than the control group (p<0.05).

Omija seed oil was extracted from Omija seeds, a by-product of Omija, using an eco-friendly pressed extraction method. Physicochemical properties and antioxidant activities of 12 extracts using different combinations of seed moisture content (5, 7.5, and 10%) and extraction temperature (25, 49, 75, and 100℃) were then investigated. The highest extraction yield was 31.33% at moisture of 5% and temperature of 75℃. The lowest acid value was 4.18±0.25 at moisture of 5% and temperature of 49℃ or moisture of 7.5% and temperature of 25℃. Peroxide value, iodine value, and saponification value were the lowest at 0.64±0.56 meq/kg, 159.38± 6.03, and 57.60±9.40, respectively, at moisture of 5% and temperature of 25°C. The content of total polyphenolics was the highest at 4,413±125 mg TAE/100 g when the moisture content was 10% and the extraction temperature was 25℃. DPPH radical scavenging activities of oil extracts at 20~100 mg/mL were 28.68±7.30~87.65±2.20%. The maximum antioxidant activity and IC50 were 87.65±2.20% and <20 mg/mL, respectively, for extract obtained at moisture of 10% and temperature at 100℃. As a result, the extraction yield, acid value, peroxide value, iodine value, saponification value, and so on were excellent at moisture content of 5% and extraction temperature of 25℃ or 49℃. However, the content of total polyphenolic compounds and antioxidant activity were the highest at moisture of 10% and extraction temperature of 100℃. In conclusion, extracting Omija seed oil from Omija seeds, a by-product of Omija, is effective with a pressed extraction method.

This study investigated the minimum salt concentration required for achieving the optimal quality characteristics of sauerkrauts made by adding 0.5, 1.0, 1.5, 2.0, and 2.5% (w/w) of sea salt to cabbage according to the fermentation period. For evaluating the quality characteristics, we measured the microorganisms (lactic acid bacteria, yeast, and coliform group), pH, total acidity, salinity, chromaticity, and hardness every 24 hours. The lactic acid bacteria were identified and analyzed, and acceptance test was carried out on the 4th day of fermentation. The results showed that the salinity of 0.5, 1.0, 1.5, and 2.0% sauerkrauts on the 4th day of fermentation was lower than the average salinity of Baechu-Kimchi. The 0.5, 1.0, 1.5, and 2.0% sauerkrauts had significantly higher lactic acid bacteria than the 2.5% sample, and the coliform group was not detected after the 5th day of fermentation. Among the microbes identified, Weissella cibaria JCM 12495 was found only in domestic sauerkraut, in addition to Lactococcus lactis NCDO 604, Leuconostoc citreum JCM 9698, and Lactobacillus sakei DSM 20017. The results of the acceptance test show that 1.0 and 1.5% sea salt sauerkraut had significantly higher overall acceptance compared to the other samples. In conclusion, sauerkraut with a salt concentration of 1.0 and 1.5% (w/w) had abundant lactic acid bacteria and excellent sensory properties, suggesting that the production of low-salted sauerkraut can be adopted to reduce consumer salt intake in the future.

To increase the utilization of Centella asiatica (CA), enzymes such as cellulase and pectinase were added and the physicochemical properties of the treated CA were analyzed. In addition, apple-CA jam was prepared using the enzyme-treated CA, which had the best antioxidant properties, and the physicochemical and sensory qualities of the jam were measured. There was a high content of ascorbic acid, polyphenols, flavonoids, reducing sugar, amino acid, minerals and DPPH radical scavenging activity in the enzyme-treated group. The antioxidant component and activity in the jam prepared by adding enzyme-treated CA increased with an increase in the amount of enzyme-treated CA. In the soluble solids, the higher the amount of enzyme-treated CA, the higher the value, but there was no significant difference in pH. The sensory evaluation of the jam, in particular the taste, showed that the highest preference was observed when the enzyme-treated CA was added in the range of 5.0~6.7%, and the control group showed the lowest preference. There was no significant difference in flavor and spreadability among the treatment groups, however, the control group showed the highest color preference. In the overall acceptability, when 5.0% of enzyme-treated CA was added, the highest acceptability was shown.

This study investigated the physicochemical properties and acceptability of yellow layer cake prepared using various levels of wet-milled rice flour (RF). RF was used to substitute 0% (control group), 15% (RF-15 group), 30% (RF-30 group) and 45% (RF-45 group) of wheat flour (WF) to manufacture yellow layer cakes. The substitution of WF with RF showed no significant effect on the pH but decreased the specific gravity and viscosity of the batter. Baking loss rates ranged from 4.65% to 5.03%, showing no significant difference among samples. In the color measurement, the experimental groups showed higher redness (a) and yellowness (b) than the control group (p<0.05). The experimental groups showed lower gumminess and chewiness than the control group. According to the results of intensity measurement of sensory properties, the RF-30 and RF-45 groups showed stronger intensities for darkness, sweetness, moistness and softness than the control group. The acceptance test found that the RF-45 group had significantly higher or similar results for all acceptance attributes than the control group. These results indicate that RF addition as a replacement of WF at a ratio of 45% is optimal for producing yellow layer cakes.

This study investigated the effect of dry heat treatment (DHT) on the physicochemical properties of hard type (HR) and floury type (FR) rice to improve the processing aptitude of rice flour. The rice flour was heated at 130oC for 0, 2 and 4 hours, and the color value, water absorption index (WAI), water soluble index (WSI), swelling power, solubility, pasting properties, particle shape and the X-ray diffraction were measured. After DHT, the L value of rice flour decreased, and the b value increased. The WAI, WSI, swelling power and solubility of HR and FR increased with the increase of treatment time. The cold viscosity and setback increased, while breakdown decreased. Cracks and lumps formed with fine particles were observed. The X-ray diffraction pattern was A-type, while the diffraction intensity decreased. According to the results of the two-way analysis of variance (ANOVA) test, the hydration and pasting properties were significantly different between HR and FR and were affected by DHT time. The results suggest that the properties of modified rice flour by DHT can be used in the food industry.