근현대 시기, 한국에서는 많은 양의 한문 시가(詩歌) 총집(總集)이 출판되었다. 그 러나 한문 시가 총집은 일제강점기에 들어서며 많이 유실되었는데, 조소앙(趙素昻)은 한국의 문헌들을 보존하기 위해 시대별 시가 작품을 수록한 한국문원(韓國文苑)을 편찬하였다. 일제강점기에 그가 적극적으로 저작 활동을 한 것은 당시 식민 지배를 받던 상황 속 저항적 행위라 할 수 있었고, 그에 의해 편찬된 문헌들은 현재까지 계 승되어 그 가치를 인정받고 있다. 주지할 것은 조소앙의 한국문원에 수록된 시들 이 시대순으로 작품을 수록한 것 외에는, 어떠한 규율도 발견할 수 없고, 작품을 창j avascript:void(0);작한 저자의 출생, 사망 연도와 같은 정보들 또한, 규칙 없이 나열 되어 있다는 점이다. 이것은 한국문원이 집필될 당시 저자의 의도가 주로 선조들의 작품을 보존하는 데에 초점이 맞추어져 있었기 때문이었다. 이에 이 글은 조소앙 의 저작 한국문원을 중심으로, 조소앙이 저작을 편찬하려 했던 의도와 그의 편찬 방식, 작품의 출처, 작가의 관점 등을 분석하고자 하였다. 한편, 근현대 시기 한국 한 시 작품을 정리한 조소앙의 저서를 분석하는 것은 과거 일제강점기라는 역사적 상흔 을 입었던 한국이 과거 문학작품들을 보존하려 했던 방식을 알 수 있게 한다. 이것 은 문인들이 강압적 권력에 저항했던 역사를 반추하게 하고, 한국의 문화적 유산을 복구하는 과정이기에 중요한 지점이라 할 수 있다.

Decommissioning waste is generated with various types and large quantities within a short period. Concrete, a significant building material for nuclear facilities, is one of the largest decommissioning wastes, which is mixed with aggregate, sand, and cement with water by the relevant mixing ratio. Recently, the proposed treatment method for volume reduction of radioactive concrete waste was proven up to scale-up testing using unit equipment, which involved sequentially thermomechanical and chemical treatment. According to studies, the aggregate as non-radioactive material is separated from cement components with contaminated radionuclides as less than clearance criteria, so the volume of radioactive concrete waste is decreased effectively. However, some supplementation points were presented to commercialize the process. Hence, the process requires efficiency as possible to minimize the interface parts, either by integration or rearranging the equipment. In this study, feasibility testing was performed using integrated heating and grinding equipment, to supplement the possible issue of generated powder and dust during the process. Previously, heat treatment and grinding devices were configured separately for pilot-scale testing. But some problems such as leakage and pipe blockage occurred during the transportation of generated fine powder, which caused difficulties in maintaining the equipment. For that reason, we studied to reduce the interface between the equipment by integrating and rearranging the equipment. To evaluate the thermal grinding performance, the fraction of coarse and concrete fines based on 1mm particle size was measured, and the amount of residual cement in each part was analyzed by wet analysis using 4M hydrochloric acid. The result was compared with previous studies and the thermomechanical equipment could be selected to enhance the process. Therefore, it is expected that the equipment for commercialization could be optimized and composed the process compactly by this study.

When storing spent fuel in a dry condition, it becomes essential to ensure that any remaining moisture bound to the canister and spent fuel is effectively removed and stored within an inert gas environment. This is crucial for preserving the integrity of the spent fuel. According to the NRC- 02-07-C-006 report, it is advised to reduce pressure gradually or in incremental stages to prevent the formation of ice. In the context of vacuum drying, it is desirable to perform testing using a prototype model; however, utilizing a prototype model can be difficult due to budget constraints. To address this limitation, we designed and constructed a laboratory-scale vacuum drying apparatus. Our aim was to assess the impact of vacuum pump capacity on the drying process, as well as to evaluate the influence of canister volume on drying efficiency. The vacuum drying tests were carried out until the surface temperature of the water inside reached 0.1°C. In the tests focusing on vacuum pump capacity, vacuum pumps with capacities of 100, 200, 400, and 600 liters were employed. The outcomes of these tests indicated that smaller vacuum pump capacities resulted in increased evaporation rates but also prolonged drying times. In the case of drying tests based on canister volume, canisters with volumes of approximately 100 and 200 liters were utilized. The results revealed that larger canister volumes led to longer drying times and lower rates of evaporation. Consequently, if we were to employ an actual dry storage cask for vacuum drying the interior of the canister, it is anticipated that the process would require a substantial amount of time due to the considerably larger volume involved.

본 연구는 경남지역 대나무림에 대한 면적 및 입목축적량 산정과 함께 탄소저장량을 추정하기 위하여 수행되었다. 현재 산림청의 임업통계연보에는 대나무림에 대한 공간정보인 면적만 제시되고 있을 뿐, 입목축적에 대한 정보는 전혀 제공되고 있지 못하다. 따라서 본 연구에서는 최근에 만들어진 대나무 재적표를 활용하여 경남지역의 입목축적량을 계산하고, 여기에 탄소배출계수를 이용하여 탄소저장 량을 계산하였다. 대나무림에 대한 면적은 1/5,000 수치임상도에서 추출하였으며, 입목축적을 산정하기 위해 현지조사한 표준지 자료를 활용하였다. 표준지의 대나무는 개체목 별로 흉고직경과 수고에 재적표를 적용하여 표준지의 재적을 산정하였다. 경남지역 대나무의 공간분포 면적은 총 6,038ha로서, 전국 대나무림(20,262 ha)중 약 30%를 차지하는 것으로 나타났다. 경남지역 중에서는 하동군이 가장 많은 면적인 1,027 ha가 분포하는 것으로 나타났다. 경남지역의 시계열적인 분포면적 변화는 2013년 대비 2022년에 약 20.3% 감소하였으 며, 2019년 대비 약 0.4%가 감소하였다. 경남지역 대나무의 입목축적량은 2022년말 현재 148,510 ㎥인 것으로 계산되었으며, ha당 축적은 약 25 ㎥으로 나타났다. 그리고 경남지역 대나무 숲의 이산화탄소저장량은 287,277 tCO2 이었으며, ha당 저장량은 47.6 tCO2 인 것으로 나타났다.

본 연구에서는 콘크리트의 내구성 및 낮은 인장강도를 향상시키기 위해 개발된 폴리비닐알콜(PVA) 혼입 시멘트 복합 체의 내약품성을 평가하였다. 시멘트 복합체에 대한 PVA 혼입률은 0%, 1.0%, 1.2%로 설계되었다. 각 혼입률에 따른 시멘트 복 합체의 압축강도, 인장강도, 휨강도를 측정하였다. 결과적으로 1.2% 혼입률에서 압축강도는 1.3배, 인장강도는 5.6배, 휨강도는 17.9배 증가하였다. 내약품성 실험을 위해 염화칼슘, 황산나트륨, 그리고 황산 용액에 시멘트 복합체를 침지시킨 후 30일, 40일, 50일 후 질량 소실률을 측정하여 내화학성을 평가하였다. 내화학성 실험 결과, PVA 혼입은 약품의 침투를 방지하여 시멘트 복 합체의 내화학성을 향상시키는 것으로 나타났다. 총체적으로, PVA 혼입은 시멘트 복합체의 내화학성을 향상시키는 동시에 강도 특성을 제공하는 것으로 확인되었다.

Due to COVID-19, changes in consumption trends are taking place in the distribution sector, such as an increase in non-face-to-face consumption and a rapid growth in the online shopping market. However, it is difficult for small and medium-sized export sellers to obtain forecast information on the export market by country, compared to large distributors who can easily build a global sales network. This study is about the prediction of export amount and export volume by country and item for market information analysis of small and medium export sellers. A prediction model was developed using Lasso, XGBoost, and MLP models based on supervised learning and deep learning, and export trends for clothing, cosmetics, and household electronic devices were predicted for Korea's major export countries, the United States, China, and Vietnam. As a result of the prediction, the performance of MAE and RMSE for the Lasso model was excellent, and based on the development results, a market analysis system for small and medium sellers was developed.

본 연구는 조현병으로 진단된 환자들과 정상 대조군 간의 자기공명영상을 사용하여 대뇌 피질 하부 영역의 부피를 측정 하여 대뇌의 구조적 이상을 비교하였다. 자기공명영상 검사 후 획득된 3D T1-MPRAGE 영상과 FreeSurfer 소프트웨어 를 사용하여 대뇌 피질 하의 31개 영역의 부피를 측정하였다. 연구 결과는 조현병 환자군에서 양측 측뇌실, 양측 맥락얼기, 제3뇌실, 뇌척수액 영역의 부피가 정상 대조군보다 유의하게 증가했으며, 좌 우반구 피질, 좌측 시상, 좌측 해마 영역의 부피는 정상 대조군보다 유의하게 감소하였다. 또한, 측정된 대뇌의 부피값과 PANSS 총점수는 약한 음의 상관관계를 나타 내었다. 따라서, 본 연구에서는 자기공명영상과 FreeSurfer를 이용하여 조현병 환자의 대뇌 피질 하 부피를 측정하고 이를 정상 대조군과 비교하여 유의한 증가와 감소를 확인하였다.

Here, we report the preparation of microporous-activated carbons from a Brazilian natural lignocellulosic agricultural waste, cupuassu shell, by pyrolysis at 500 ºC and KOH activation under different experimental conditions and their subsequent application as adsorbent for CO2 capture. The effect of the KOH:precursor ratio (wt/wt%) and the activation temperature on the porous texture of activated carbons have been studied. The values of specific surface area ranged from 1132 to 2486 m2/ g, and the overall micropore volume ranged from 0.73 to 1.02 cm3/ g. Carbons activated with 2:1 ratio of KOH and activation temperature of 700 ºC presented a CO2 adsorption at 1 bar of 7.8 and 4.4 mmol/g at 0 °C and 25 ºC, respectively. The isosteric heat of adsorption, Qst , was calculated for all samples by applying the Clausius–Clapeyron approach to CO2 adsorption isotherms at both temperatures. The values of CO2 adsorption capacities are among the highest reported in the literature, especially for activated carbons produced from biomass.

When decommissioning and operating nuclear power plants, a lot of radioactive waste in concentrated waste powder, slurry, sludge, and powder is generated. The radioactive waste, non-conformity for disposal, cannot be treated or disposed of, but is currently being stored instead. To dispose of the waste, the waste can be solidified by mixing with an appropriate solidification agent. However, when the solidification agent and powder particles are mixed as in the conventional method, the final volume of the waste form to be disposed of increases. In order to solve this problem, in this study, volume reduction was achieved, compared to the existing powder, by applying the roll compaction technology to mold the radioactive waste into compressed pellets. Soil, concrete, concentrate waste, and contaminated soil powder were used as test materials, and pellets were prepared under different operating conditions. Subsequently, a compressive strength test was performed to confirm the integrity and optimal process conditions of the manufactured pellets. However, in order to perform the compressive strength test, the upper and lower surfaces of the pellets must be horizontal, but the pellet has the shape of two tetrahedrons joined together. Hence, test specimens for measuring compressive strength were prepared by making a surface treatment jig. The compressive strength test showed a high strength of 5.20~28.20 MPa. The process conditions showing high compressive strengths were selected as the optimal process conditions. Finally, the volume reduction ratios were calculated by measuring the weight, density and volume of the manufactured pellets. The degrees of volume reduction of the manufactured pellets compared to the existing powder were checked. When the roll gap was 0 mm, the average reduction ratios of the test materials were 3.7 for the soil, 4.0 for the concrete, 4.6 for the concentrate waste, and 3.8 for the contaminated soil. When roll gap was 1 mm, the ratios were 2.7 for the soil, 2.9 for the concrete, 3.4 for the concentrate waste, and 2.8 for the contaminated soil. Therefore, from a conservative point of view (Roll gap = 1 mm), when powdered waste is formed into pellets, it means that the volume is reduced by 1/2.7 for soil, 1/2.9 for concrete, 1/3.4 for concentrated waste, and 1/2.8 for contaminated soil.

생물환경조절학회지 31권 3호에 게재된 논문의 재료 및 방법의 양액 정보가 잘못 기재되어 있어 바로 잡습니다.

Melons, a rich source of vitamins and fibers, are commonly grown in the soil. Hydroponic cultivation could improve yield and quality of melon and selection of substrate volume and the kind of substrates is important for hydroponic cultivation of melons. This study investigated the effect on melon growth according to volume of granular rockwool and substrates of coir and rockwool slab. ‘Geumsegye’ melon (Cucumis melo L. cv. Geumsegye) was cultivated hydroponically according to volume of granular rockwool to 1.0, 1.5, 2.0, 3.0, and 4.0 L, and was also cultivated using coir and rockwool slabs. Logistic model was applied to estimate the growth characteristics of melons such as plant height, leaf length, leaf width, and the characteristics of fruit. The growth characteristics of melons were significantly increased at 4.0 L compared to those grown of 1.0 L volume of on granular rockwool, and the results were the highest in coir and rockwool slabs. Melons grown in rockwool slabs showed the largest fruit fresh weight, fruit length, and fruit width. During hydroponic cultivation, growth characteristics of melon appropriate at the 4.0 L volume of granular rockwool, and the highest at coir and rockwool slabs. This study provides a basis for understanding the effect of root zone environment to the growth characteristics and fruit quality of non-netted melon.

This study was performed to assess the cosmic-ray effect caused by altitude in the aerial gammaray measurement. For the gamma-ray measurement experiment by altitude, the aerial survey system composed of four 4×4×16 inches large volume NaI (Tl) detectors was used. The aerial survey system was installed in a rotor-craft to stably keep its flight altitude and position. In addition, in order to avoid to time-dependent shielding effects with the amount of fuel, a rotor-craft of which the fuel tank is not located beneath the cabin floor was selected. In this study, the ROI (Region Of Interest) was set to the 3~6 MeV range to assess the cosmic-ray contribution to the gamma-ray spectrum that could ignore the contribution of the dominant natural radionuclides. The gamma-ray spectra measured inside and outside of the rotor-craft on the ground were compared to evaluate the shielding effects of the aircraft body. As a result, the count rate of the 40K photo peak was decreased by about 10% when measuring the inside compared to the outside. On the other hand, the total count rate of the 3~6 MeV region was decreased by about 0.7% under the same condition. Therefore, the aircraft body effect was insignificant in 3~6 MeV region considering the relative uncertainty of 0.04~0.78% (1σ). In addition, the count rate in the 3~6 MeV range according to altitude was evaluated to assess the cosmic-ray effect. In order to evaluate the change in the ROI count rate according to the altitude, the gamma-ray spectrum was measured in the range of 300~2,000 m above the sea to avoid the effect of terrestrial radiation. As a result, the relationship between altitude and count rate in the 3~6 MeV range showed a high correlation with the R2 value of 0.99, when the approximate equation was derived in the form of a quadratic polynomial. Also, the count rate of 3~6 MeV at 50~500 m above the ground was estimated using the correlation equation, and this value was compared with the measured count rate. As a result of comparing the average value of estimated count rate and measured count rate, the relative difference is less than 2%. Considering the relative uncertainty of 0.78~4.11% (1σ), it was possible to evaluate the count rate of the 3~6 MeV region relatively accurately. The results of this study could be used for further study on background dose corrections in aerial survey.

Radioactive waste generated in large quantities from NPP decommissioning has various physicochemical and radiological characteristics, and therefore treatment technologies suitable for those characteristics should be developed. Radioactively contaminated concrete waste is one of major decommissioning wastes. The disposal cost of radioactive concrete waste is considerable portion for the total budget of NPP decommissioning. In this study, we developed an integrated technology with thermomechanical and chemical methods for volume reduction of concrete waste and stabilization of secondary waste. The unit devices for the treatment process were also studied at bench-scale tests. The volume of radioactive concrete waste was effectively reduced by separating clean aggregate from the concrete. The separated aggregate satisfied the clearance criteria in the test using radionuclides. The treatment of secondary waste from the chemical separation step was optimally designed, and the stabilization method was found for the waste form to meet the final disposal criteria in the repository site. The final volume reduction rates of 56.4~75.4% were possible according to the application scenario of our processes under simulated conditions. The commercial-scale system designs for the thermomechanical and chemical processes were completed. Also, it was found that the disposal cost for the contaminated concrete waste at domestic NPP could be reduced by more than 20 billion won per each unit. Therefore, it is expected that the application of this technology will improve the utilization of the radioactive waste disposal space and significantly reduce the waste disposal cost.