A press which has a 20 percent share in machine tools is one of the production facilities. Recently hydraulic press is used to reinforce competitiveness of the manufacturing industry. The press by using metal powder makes products without additional process while conventional processing machine makes products after removing unnecessary parts. In this way, large quantity of products can be produced in a short time. Researches to manufacture products by the press have been proceeding after 1970. In this study, structure and displacement analysis for shape parameters for punch used as the component for hydraulic press was investigated and structural stability was identified based on the results.

주요 검역해충에 속하는 오리엔탈과실파리와 오이과실파리 두 종의 국내에서의 정착평가를 위한 기초자료를 작성하기 위하여 기존에 발표된 온도반응 데이터를 수집하여 개체군 모의에 필요한 단위모형의 매개변수를 구하였다. 이 값들로 두 해충의 개체군모형을 구성하고 제주도내 과거 기후관측 데이터를 이용하여 이들 해충이 각각 유입되었을 때의 연간 발생세대수와 그 양상을 모의하였다. 오리엔탈과실파리와 오이과실파리는 각각 연 3세대, 2세대가 발생하는 것으로 나타났으나 오리엔탈과실파리의 경우 번데기 상태로 월동하는 것을 고려해 볼 때 마지막 세대 성충의 실제 발생여부는 번데기의 온도반응 특성을 통해 검토할 필요가 있다.

Boron-doped diamond (BDD) electrode has an extremely wide potential window in aqueous and non-aqueous electrolytes, very low and stable background current and high resistance to surface fouling due to weak adsorption. These features endow the BDD electrode with potentially wide electrochemical applications, in such areas as wastewater treatment, electrosynthesis and electrochemical sensors. In this study, the characteristics of the BDD electrode were examined by scanning electron microscopy (SEM) and evaluated by accelerated life test. The effects of manufacturing conditions on the BDD electrode were determined and remedies for negative effects were noted in order to improve the electrode lifetime in wastewater treatment. The lifetime of the BDD electrode was influenced by manufacturing conditions, such as surface roughness, seeding method and rate of introduction of gases into the reaction chamber. The results of this study showed that BDD electrodes manufactured using sanding media of different sizes resulted in the most effective electrode lifetime when the particle size of alumina used was from 75~106 μm (#150). Ultrasonic treatment was found to be more effective than polishing treatment in the test of seeding processes. In addition to this, BDD electrodes manufactured by introducing gases at different rates resulted in the most effective electrode lifetime when the introduced gas had a composition of hydrogen gas 94.5 vol.% carbon source gas 1.6 vol.% and boron source gas 3.9 vol.%.

This paper is concerned with a test method that can be used to investigate the parameters of the Johnson-Cook constitutive model. These parameters are essential for accurately analyzing material behavior under impact loading conditions in numerical simulation. Ti-6Al-4V alloy (HCP crytal structure) was used as a specimen for the experiments. In the 10−3-103/ s strain rate range, three types of experimental methods (convention, compression and tension) were employed to compare the differences using MTS-810, SHPB and SHTB. Finite element analysis results when applying these parameters were displayed along with the experiment results.

Columns in existing reinforced concrete structures that are designed and constructed without considering seismic loads generally exhibit widely spaced transverse reinforcements without using seismic hooks. Due to the insufficient reinforcement details in columns compared to the reinforcement requirements specified in modern seismic codes, brittle shear failure is likely to occur. This may lead to sudden collapse of entire structure during earthquakes. Adequate retrofit strategy is required for these columns to avoid such catastrophic event. In order to do so, behavior of columns in existing reinforced concrete structures should be accurately predicted through computational analysis. In this study, an analytical model is proposed for accurately simulating the cyclic behavior of shear critical columns. The parameters for backbone, as well as pinching and cyclic deterioration in strength and stiffness are calibrated using test data of column specimens failed by shear.

The sol-gel method is the simplest method for synthesizing monodispersed silica particles. The purpose of this study is to synthesize uniform, monodisperse spherical silica nanoparticles using tetraethylorthosilicate (TEOS) as the silica precursor, ethanol, and deionized water in the presence of ammonia as a catalyst. The reaction time and temperature and the concentration of the reactants are controlled to investigate the effect of the reaction parameters on the size of the synthesized particles. The size and morphology of the obtained silica particles are investigated using transmission electron microscopy and particle size analysis. The results show that monodispersed silica particles over a size range of 54-504 nm are successfully synthesized by the sol-gel method without using any additional process. The nanosized silica particles can be synthesized at higher TEOS/H2O ratios, lower ammonia concentrations, and especially, higher reaction temperatures.

본 연구의 목적은 시스템 식별기술과 칼만필터링을 기반으로 계측된 가속도응답을 이용하여 구조물에 작용하는 모달하중을 역으로 추정하는 기법을 제시하는데 있다. 하중추정 과정에서 가속도응답은 모드응답으로 분해되며 각 모드응답에 대한 모달하중을 역으로 추정한다. 역해석과정에서 발생하는 ill-posed문제를 피하기 위하여 가상진동기에 의해 구조물의 고유진동수와 감쇠비를 보다 정밀하게 구하기 위한 시스템 식별법을 사용하였다. 본 연구에서 제안된 기법의 적용성을 위하여 40층의 철골구조물에 태풍이 작용 했을 때 계측된 가속도를 사용하였다. 적용결과에 의하면 본 연구에서 제안된 하중추정법에 의하여 모달하중 추정이 가능함을 알 수 있었다.

Service industry can be divided largely into commercial industry, banking industry, insurance industry, advertising industry, and tourism industry. Of these, banking industry is playing an essential role as it constitutes the backbone of economy. Banking industry, which belongs to financial industry, is sensitive to external environment. In this kind of industry, internal dynamics of an organization is very important. The purpose of this research is to find out what kind of influence the relation of internal dynamics perceived by members of Nonghyup organization has on customer orientation via quality of internal service. For the purpose, we have reviewed preceding studies on variables that affect customer orientation and developed a measuring tool in a form that fits banking organizations. Internal service quality, job satisfaction, and organizational immersion which play a mediating role in the model of this research not only turned out to have a significant influence on customer orientation, they also turned out to have the strongest influence. This research has academic significance as it carried out a research with an emphasis on variables that affect customer orientation of members of Nonghyup organization. Regarding practical significance, it was intended to present useful data that can be utilized for an analysis of internal service quality management and capability of human resource management.

PVDF Membrane has been used as material for the UF membrane through in-situ interfacial polymerization (IP) because of it’s outstanding properties such as high chemical resistance, thermal stability, and mechanical strength. In this study, surface morphology change of PVDF membrane was researched depending on evaporation time. 13% PVDF 6020 was used for casting and the evaporation time period was from 5s to 600s. The surface morphology of the membrane was investigated by scanning electron microscopy (SEM) and filtration was conducted in the cross flow method to evaluate the a performance of UF membrane. As a result, average pore size was increased with longer evaporation times which caused the decrease of rejection.

The thermally induced phase separation(TIPS) method offers higher reproducibility with lower tendency for defect formation and narrower pore size distribution, rendering the method more suitable for microfiltration(MF) and ultrafiltration(UF) applications. PVDF is widely used in membrane technology due to their excellent chemical resistance and strong mechanical properties. In case of MF and UF applications, the stretching method has been applied for increasing the performance of membrane by extending pore size. In this work, the effects of dope and bore flow rates and dope composition on the tensile strength of membranes was investigated. A design of experiment(DOE) analysis was used to understand the effects of the stretching parameters such as temperature, stretching ratio and holding time on the membrane performance.

The objective of this study was to determine the effect of drinking water containing trimethyl glycine or ascorbic acid on growth performance and blood parameter profiles of duck exposed to scorching heat stress. A total of 480 ducks were randomly assigned to the following eight experiment groups for 42 days : control group C with general water, treatment group 1 (T1) with drinking water containing 100 ppm ascorbic acid, treatment group 2 (T2) with drinking water containing 200 ppm ascorbic acid, treatment group 3 (T3) with drinking water containing 300 ppm ascorbic acid, treatment group 4 (T4) with drinking water containing 400 ppm trimethyl glycine, treatment group 5 (T5) with drinking water containing 800 ppm trimethyl glycine, treatment group 6 (T6) with drinking water containing 1,200 ppm trimethyl glycine, treatment group 7 (T7) with electrolytes of KCl (0.5%) + NaHCO3 (1.0%)+NaCl (0.5%). Our results revealed that the body weights and feed intakes of treatment groups, especially T3 and T6, were increased compared to the control group, where as the feed conversion ratios of treatment groups were decreased (p<0.05). Blood levels of total cholesterol, triglyceride, LDL-C, glucose, AST, ALT and pH in treatment groups were lower compared to those in the control group (p<0.05). Blood levels of red blood cell, platelets profiles, electrolyte and gas in treatment groups were higher compared to those of the control group (p<0.05).

The organization which is does sale activity in 21c, face a radical environment changes and high competition. To overcome from these situation, employee who is does sale in field are important to set sustainablity to the organization. A sales person is one of member in organizations, so they have a relation with other employee in process of job. To increase there performance and satisfaction, LMX is focused by many researchers. LMX can increase job satisfaction which can increase job performance thought organizational justice. And career of employee can has moderate effect between LMX and organizational justice. To figure out casual relationship among factors, researcher conduct a empirical analysis use 210 samples from SME saleman. Result of empirical study show us every hypothesis which researcher set up has supported. Based on this result, reseacher provide manageric implications and conclusions

The purpose of this study is to understand how to affect the safety behavior to the organization's trustees to investigate the level of safety awareness, safety awareness via the distribution center workers prepare the logistics industry disaster prevention measures. The survey was analyzed data to target by the clothing distribution center employees of 182 people. Analysis First, the level of safety awareness showed on a positive effect on organization trust. Second, it was found on the safety level of consciousness a positive effect on the safety behavior. Third, the level of safety awareness affect the safety behavior showed that the mediating role of organization trust. That is a higher level of safety awareness, such as the strict practice of business activities, investments, safety rules on safety education and training emphasis on safety increases confidence in the organization. It was confirmed the higher the confidence in the safety organization appears behavior such as actively participating in the work carried out in a safe manner, safety education and training. In addition, the effect was mediated by the organizational impact on confidence in the safety of personnel safety awareness actions. Based on that research results prepared safety awareness was raised through the industrial accident prevention measures

This study investigates on the tuning stainless steel(STS630) to understand for groove cutting characteristics. For this purpose, we observed the cutting force according to feed rate and cutting speed variation and performed the computational analysis due to groove cutting depth. In groove cutting of stainless steel, there were principal force, feed force and radial force by arranging the highest cutting force in order. In case of wall thicknesses of 0.3mm and 0.5mm at groove cutting, principal force increases according to the increase of feed rate but it is not related to cutting speed. We found the unstable region of cutting force that is caused to the friction resistance of cutting tool and elastic deformation of groove wall. In computational analysis, we confirmed that the more feed rate increases, the more strain increases around the tooth root.

We developed an Al sputtering process by varying the plasma power, process temperature, and film thickness. We observed an increase of hillock distribution and average diameter with increasing plasma power, process temperature, and film thickness. Since the roughness of a film increases with the increase of the distribution and average size of hillocks, the control of hillock formation is a key factor in the reduction of Al corrosion. We observed the lowest hillock formation at 30 W and 100 oC. This growth characteristic of sputtered Al thin films will be useful for the reduction of Al corrosion in the future of the electronic packaging field.

The present study investigated the effects of processing parameters such as time (10, 20, 30, 40 min), pressure (25, 50, 75, 100 MPa), and the salinity of brine (0~10%(w/v)) on jacopever (Sebastes schlegeli Hilgendorf) in order to establish optimization of the three factors using a high hydrostatic pressure (HHP) machine. To do so, it analyzed the quality characteristics of volatile basic nitrogen (VBN), trimethylamine (TMA), total bacterial counts, dynamic viscoelasticities, and differential scanning calorimetry (DSC) properties. First, when the time increased to 40 mins, by 10 min intervals, the total bacterial counts in HHP groups under 25℃, 100 MPa, and 4%(w/v) brine were significantly decreased except for the first 10 min in comparison to the control group. In regards to DSC properties, the onset temperature (TO) of the first endothermal curve was significantly reduced. Second, when the pressure level increased up to 100 MPa by 25 MPa increments, the total bacterial counts in the HHP samples significantly decreased for 20 min at 50 MPa or higher. As the pressure increased, G′, G″ and the slope of tan δ decreased (except for 50 MPa). Third, in regards to the salinities of brine, when the HHP processing was treated at 100 MPa, 25℃ for 20 min, the total bacterial counts of all the HHP groups significantly decreased in comparison to those of the control group. A significant difference was found in the enthalpy of the second endothermic curve in the 6~10%(w/v) (except 7%(w/v)) HHP groups. Therefore, the salinity of the immersion water under the HHP condition was appropriate when it was lower than 6%(w/v). The present study demonstrated that the optimum parameter condition according to/under the condition of the microbial inhibition and economic effects using an HHP would be the reaction time for 20 min, reaction pressure at 100 MPa, and the salinity of 4%(w/v) brine.

쇤베르크(A. Schönberg, 1874-1951)의 《다섯 개의 오케스트라 소품》(Op. 16, 1909) 가운데 제3번 <색깔>(Farben )로 시작되어 1960년대 리게티(G. Ligeti, 1923-2006)의 《아트모스페레》(Atmosphères , 1961)를 통해 음악 구성의 매개변수(Parameter)로 등장한 ‘음색’(Klangfarbe)은 19세기까지 음악 이론의 연구 대상이 아니었다. 역사적으로 음높이 그리고 음가와 분리할 수 없는 부수적인 소재였던 ‘음색’에 대한 많은 연구가 1960년대 등장한 ‘음색작곡’(Klangfarbenkomposition)을 대상으로 하고 있다. 그러나 본 연구에서는 역사적으로 ‘음색’이 결코 부수적인 음악 요소가 아니었음을 이론적으로 명료하게 설명할 수는 없지만, ‘음색’이라는 관점으로 음악을 관찰하여 18-19세기 작곡가들이 이 매개변수를어떻게 다루었는지, 그 비중의 정도 그리고 음색과 다른 음악 매개변수와의 관계성 변화를 우선적으로 살펴보았다. 특히 음과 관계된, 선율, 화성 조성과의 관계 속에서 음색 그리고 리듬과 음색의 관계를 관현악법을 통해 확인하는 작업을 포함한 제1장은 20세기 ‘음색’의 주요 매개변수로의 자리매김의 역사적 과정을 설명한다. 제2장에서는 음의 연속을 통해 얻어진 ‘선율’을 대신하는 ‘음색 선율’ 또는 ‘주제’를 대신하는‘음색 주제’를 넘어 ‘음색’ 그 자체가 형식을 이루는 과정을 20세기 전후 창작된 작품분석으로 확인시켜준다. 또한 작품분석은 ‘음색’이 주요 음악적 매개변수로 자리매김 하는 과정이 ‘악기고유 정체성 해체’에 종착점을 두었다는 결론을 이끌 수 있게 하였다. 그 방법에 있어서는‘음고’와의 관계를 유지하면서 구체화 한 음색작곡과 악기의 특수주법과 연결된 음색작곡이라는 두 가지 방법으로 분류할 수 있었고, 그 분류는 ‘쇤베르크/드뷔시-리게티-배음렬음악 작곡가들’ 그리고 ‘베베른-케이지/펜데레츠키-카겔’에 이른다.