난온대 상록활엽수림의 변화과정을 장기 모니터링하기 위해 1996년 완도수목원에 설치된 16개 고정조사구(시험구, 대조구)를 대상으로 식생구조 변화를 분석했다. 특히 1996년도 복원기법으로 도입한 시험처리(솎아베기, 식물도입)가 식생 발달에 미친 영향을 심도 있게 논의했다. 교목층에 붉가시나무가 우점한 군락(고정조사구 1∼3)에서는 이 종의 평균상대우점치(MIP)가 줄고, 외부에서 들어온 상록활엽수종의 MIP가 늘어나 장래 식생구조 변화가 예상된다. 붉가시 나무-낙엽활엽수림(고정조사구 5, 7), 소나무림(고정조사구 9, 10)에서도 상록활엽수종의 세력 확장이 확인됐다. 솎아베 기를 시행했던 시험구에서 조류 피식 산포형인 생달나무, 참식나무, 후박나무 등의 종 유입과 상록활엽수종의 세력 확장이 두드러져, 난온대림 식생 발달을 촉진하는데 유효했다고 본다. 시험구에 상록활엽수종을 심어 식생구조 변화를 꾀했지만, 식재 수량이 적어 식생구조 변화에 끼친 영향이 미약했던 것으로 보인다. 다른 식생유형보다 소나무림은 소나무, 곰솔의 쇠퇴에 따른 상록활엽수림으로의 식생구조 변화가 뚜렷했다.

본 연구는 초등학생의 골연령에 따라 군집화 시켜 각 군집 그룹의 체격, 체력 및 골성숙도를 분석하고 자료 분석을 통해 초등학생들의 균형적인 발달을 위한 기초자료를 제공하는 데 있다. 연구대상은 8세∼13세에 해당하는 2243명을 대상으로 하였으며 골성숙도 산출을 위해 X-ray필름을 촬영한 후 TW3 방법 점수 환산표에 적용시켜 골성숙도를 산출했다. 신장계(Hanebio, Korea, 2021)와 Inbody 270 (Biospace, Korea, 2019)를 사용하여 총 2개의 체격 요소를 측정하였으며, 체력은 근력(악력), 평형성(외발 서기), 민첩성(플랫테핑), 순발력(제자리멀리뛰기), 유연성(좌전굴), 근지구력(윗몸일으키기), 심폐지구력(셔 틀런)으로 총 7개 체력 요소의 종목을 측정하였다. 자료처리 방법은 SPSS PC/Program(Version 26.0)과 Britics Studio Tool을 이용하여 K-Means 클러스터링 기법, 교차분석, 일원변량분석(One-Way ANOVA) 을 실시하였으며, p< .05 수준에서 유의한 것으로 간주하였다. 본 연구의 결과는 다음과 같다. 첫째, 미숙, 보통, 조숙의 3가지 골성숙도를 사용하여 군집화한 결과, 군집 1(미숙)은 근력, 평형성, 민첩성에서 높게 나 타났다. 군집 2(보통)는 유연성에서 낮게 나타났으며, 군집 3(조숙)은 근력에서 높게 나타났다. 둘째, 초등 학생의 개인특성별 군집화에 따른 체격 차이를 분석한 결과, 신장, 체중, 체지방률 모두 군집 3(조숙)이 높 게 나타났다. 셋째, 초등학생의 개인특성별 군집화에 따른 체력 차이를 분석한 결과, 악력검사(좌, 우)는 군 집 3(조숙)이 높게 나타났고 외발서기의 경우 군집 1(미숙)이 높게 나타났으며, 제자리멀리뛰기의 경우 군 집 3(조숙)이 높게 나타났다.

Tungsten carbide is widely used in carbide tools. However, its production process generates a significant number of end-of-life products and by-products. Therefore, it is necessary to develop efficient recycling methods and investigate the remanufacturing of tungsten carbide using recycled materials. Herein, we have recovered 99.9% of the tungsten in cemented carbide hard scrap as tungsten oxide via an alkali leaching process. Subsequently, using the recovered tungsten oxide as a starting material, tungsten carbide has been produced by employing a self-propagating high-temperature synthesis (SHS) method. SHS is advantageous as it reduces the reaction time and is energy-efficient. Tungsten carbide with a carbon content of 6.18 wt % and a particle size of 116 nm has been successfully synthesized by optimizing the SHS process parameters, pulverization, and mixing. In this study, a series of processes for the highefficiency recycling and quality improvement of tungsten-based materials have been developed.

Recently, high-entropy carbides have attracted considerable attention owing to their excellent physical and chemical properties such as high hardness, fracture toughness, and conductivity. However, as an emerging class of novel materials, the synthesis methods, performance, and applications of high-entropy carbides have ample scope for further development. In this study, equiatomic (Hf-Ti-Ta-Zr-Nb)C high-entropy carbide powders have been prepared by an ultrahigh- energy ball-milling (UHEBM) process with different milling times (1, 5, 15, 30, and 60 min). Further, their refinement behavior and high-entropy synthesis potential have been investigated. With an increase in the milling time, the particle size rapidly reduces (under sub-micrometer size) and homogeneous mixing of the prepared powder is observed. The distortions in the crystal lattice, which occur as a result of the refinement process and the multicomponent effect, are found to improve the sintering, thereby notably enhancing the formation of a single-phase solid solution (high-entropy). Herein, we present a procedure for the bulk synthesis of highly pure, dense, and uniform FCC single-phase (Fm3m crystal structure) (Hf-Ti-Ta-Zr-Nb)C high-entropy carbide using a milling time of 60 min and a sintering temperature of 1,600oC.

Fishery sea anchor is widely used for many fishing vessels. However, standardization of the dimension and terminology of the fishery sea anchor has not been achieved, reducing the reliability of the performance and safety of the fishery sea anchor. Therefore, this study researches the reality of usage of fishery sea anchor and then attempts to suggest the development direction of the standard draft as basic data. As a result of the survey on the reality of usage show that various terms were used for each part of the fishery sea anchor (including the incorrect form of non-standard words derived from Japanese) and that the production of this product in the fishery sea anchor market was concentrated on one specific manufacturer. In addition, the main specifications of the fishery sea anchor are set and manufactured based on conventional experience without standards. In the field, there was no standardized drawing for fishery sea anchor and users had low awareness of the main specifications of fishery sea anchor. Therefore, this study suggested the following regarding the fishery sea anchor: standard terms for each part including Korean and English names and standard drawing of sea anchor. It is hoped that this study will contribute to research for the standardization of fishery sea anchor, which will increase in reliability and lead to increased interest in standardization in the fishery field.

본 논문에서는 유지보수를 위한 구조물 인상 시 위험도 분석을 수행하여 안전사고를 방지할 수 있는 스마트 자동 인상 시스템을 개 발하였다. 쌍대비교행렬 분석 기법을 활용하여 위험도를 분석할 수 있는 정량적 위험도 분석 프로그램을 개발하였고, 이를 자동 인상 시스템과 연계하여 구조물 인상과 동시에 실시간으로 위험도 분석을 하였다. 자동 인상 시스템의 구성요소 중 거리측정센서로 구조 물 인상 시의 변위를 측정하고, 측정된 변위는 정량적 위험도 분석 프로그램에 입력되어 위험도를 분석한다. 개발한 스마트 자동 인상 시스템의 성능을 확인하기 위해 실제 교량을 대상으로 실험을 수행하였으며, 구조물 인상과 동시에 위험도 분석이 가능한지를 확인 하였다. 스마트 자동 인상 시스템의 성능을 평가하기 위해 인상실험 시 검증된 LVDT(linear variable differential transformer)를 함께 설치하였으며 거리측정센서와 LVDT로 측정되는 변위로 최대 인상량과 구역별 단차를 분석하였다. 인상장치의 동시 작동에 대한 성 능을 통계적 분석방법인 분산분석(analysis of variance) 방법을 이용하여 성능을 검증하였다.

본 연구에서는 폐기물 배출해역의 퇴적물이 해양생물에 미치는 영향을 평가하기 위해 2016~2019년 3개 배출해역; 동해병, 서해 병, 동해정 해역의 9개 정점에서 채취한 퇴적물 시료들을 대상으로 국내 해양폐기물공정시험기준에 의거하여 저서성단각류(Monocorophium acherusicum)와 발광박테리아(Vibrio fischeri)를 이용한 독성시험을 수행하였다. 시험결과, 상대평균생존율(저서성단각류)과 상대발광저해율 (발광박테리아)이 각각 30 % 이하로서 ‘독성없음’으로 판정되었으나, t검정을 이용한 독성 평가 결과에서는 총 12개(2016년 6개, 2017년 1개, 2018년 1개, 2019년 4개)의 저서성단각류 시료에서 대조구와 유의한 차이를 나타내었다(p<0.05). 저서성단각류의 독성원인 탐색을 위해 퇴 적물 내 8종 중금속 함량(Cr, As, Ni, Cd, Cu, Pb, Zn, Hg)과 저서성단각류 상대평균생존율의 단순선형회귀분석을 수행한 결과, Cr의 저서성 단각류 독성 기여도가 가장 높았다(p=0.000, R2=0.355). 또한, 매년 독성영향이 가장 높은 정점(DB-85)의 시료에서 Cr이 여전히 가장 높은 농 도로 검출되었으며, 해양환경기준을 매년 초과하였다. 해양폐기물공정시험기준의 생태독성판정 기준 적용 시 ‘독성없음’으로 평가되는 퇴 적물 오염도가 대조구와의 통계적 유의성 검정, 독성원인확인 평가를 적용할 경우 독성영향을 수용 가능한 수준으로 판단하기 어려우므로 향후 종민감도분포곡선을 활용한 정량적 위해성 평가를 통한 준거치를 도출하여 생태독성 영향 판단 기준의 재설정을 고려할 필요가 있다.

PURPOSES : Road surface conditions are vital to traffic safety, management, and operation. To ensure traffic operation and safety during periods of snow and ice during the winter, each local government allocates considerable resources for monitoring that rely on field-oriented manual work. Therefore, a smart monitoring and management system for autonomous snow removal that can rapidly respond to unexpected abrupt heavy snow and black ice in winter must be developed. This study addresses a smart technology for automatically monitoring and detecting road surface conditions in an experimental environment using convolutional neural networks based on a CCTV camera and infrared (IR) sensor data. METHODS : The proposed approach comprises three steps: obtaining CCTV videos and IR sensor data, processing the dataset acquired to apply deep learning based on convolutional neural networks, and training the learning model and validating it. The first step involves a large dataset comprising 12,626 images extracted from the acquired CCTV videos and the synchronized surface temperature data from the IR sensor. In the second step, image frames are extracted from the videos, and only foreground target images are extracted during preprocessing. Hence, only the area (each image measuring 500 × 500) of the asphalt road surface corresponding to the road surface is applied to construct an ideal dataset. In addition, the IR thermometer sensor data stored in the logger are used to calculate the road surface temperatures corresponding to the image acquisition time. The images are classified into three categories, i.e., normal, snow, and black-ice, to construct a training dataset. Under normal conditions, the images include dry and wet road conditions. In the final step, the learning process is conducted using the acquired dataset for deep learning and verification. The dataset contains 10,100 (80%) data points for deep learning and 2,526 (20%) points for verification. RESULTS : To evaluate the proposed approach, the loss, accuracy, and confusion matrix of the addressed model are calculated. The model loss refers to the loss caused by the estimated error of the model, where 0.0479 and 0.0401 are indicated in the learning and verification stages, respectively. Meanwhile, the accuracies are 97.82% and 98.00%, respectively. Based on various tests that involve adjusting the learning parameters, an optimized model is derived by generalizing the characteristics of the input image, and errors such as overfitting are resolved. This experiment shows that this approach can be used for snow and black-ice detections on roads. CONCLUSIONS : The approach introduced herein is feasible in road environments, such as actual tunnel entrances. It does not necessitate expensive imported equipment, as general CCTV cameras can be applied to general roads, and low-cost IR temperature sensors can be used to provide efficiency and high accuracy in road sections such as national roads and highways. It is envisaged that the developed system will be applied to in situ conditions on roads.

PURPOSES : In this study, the results of an intensive field survey of a composite pavement applied to an expressway in Korea are analyzed. The results are intended to be used as basic data for evaluating the composite pavement and for preparing quality control measures through a review and analysis of the change in the state of the tensile bonding strength of the composite pavement. METHODS : To evaluate, repeated field coring and indoor tensile bonding strength evaluations are conducted for five years, and the commonality evaluation of pavement using pavement condition investigation equipment is conducted annually. RESULTS : The results of this study show that the degree of reflective crack generation varies depending on the type of concrete pavement and type of asphalt mixture applied to the intermediate layer, and that the CRCP composite pavement exhibits better initial commonality than the JCP composite pavement. In addition, it is confirmed that the composite cross-section pavement section with MASTIC applied as an intermediate layer shows excellent adhesion performance between the lower concrete layers from the beginning of construction in all sections, as well as satisfied the quality control standards for good pavement and tensile adhesion even after approximately five years of public use. CONCLUSIONS : Based on a follow-up survey of the composite pavement testing sections, it is confirmed that the section constructed with the MASTIC intermediate layer and CRCP satisfies the quality control standards for good pavement conditions and tensile adhesion even after approximately five years of public use.

To investigate the effects of ozonated water concentration and soaking time on adventitious root formation of willow, we studied the efficiency of root cuttings in the revegetation technology of biological engineering of willows. The ozonated water concentrations were used for 5 minutes and 2 hours at 1, 5, 10, 15, 20 ppm by soaking method and then the shoot characteristics were observed. The number and length of adventitious roots were determined. The results indicated that 20 ppm of ozonated water for 2 hours and 1 ppm of ozonated water for 5 minutes resulted in leaves turned wither away and no adventitious root production. Considering the appearance, number and length of the adventitious root, soaking willow cuttings into the ozonated water with dissolved ozone concentration, 5 ppm for 2 hours and 10-15 ppm for 5 minutes were suitable for generating adventitious roots.

본 연구는 유소년의 골연령에 따른 체력을 평가하는 데 있으며, 골연령에 따른 체력 표준지표 를 통해 유소년들의 균형적인 발달을 위한 기초자료를 제공하는 데 있다. 연구 대상은 골연령 11세∼13세 및 역연령 11세∼13세에 해당하는 730명을 대상으로 하였으며 골연령 산출을 위해 X-ray 필름을 촬영한 후 TW3 방법으로 평가하였다. 체격은 신장, 체중을 신장계(Hanebio, Korea, 2021), Inbody 270(Biospace, Korea, 2019)를 사용하여 총 2개의 체격 요소를 측정하였으며, 체력은 근력(악력), 평형성 (외발서기), 민첩성(플랫테핑), 순발력(제자리멀리뛰기), 유연성(좌전굴), 근지구력(윗몸일으키기), 심폐지구 력(셔틀런)으로 총 7개 체력 요소의 종목을 측정하였다. 자료처리 방법은 SPSS PC/Program(Version 26.0) 을 이용하여 기술통계, 독립표본 t-test 검정을 실시하였으며, p< .05수준에서 유의한 것으로 간주하였다. 본 연구의 결과는 다음과 같다. 첫째, 11세∼13세 골연령과 역연령을 비교한 결과, 체력에서 남자는 근력, 순발력, 근지구력, 심폐지구력에서 유의한 차이가 나타났다. 여자는 근력, 평형성, 민첩성, 순발력, 유연성, 근지구력, 심폐지구력에서 유의한 차이가 나타났다. 둘째, 골연령에 따른 유소년의 성별과 연령(11∼13세) 별로 체력평가의 기초 자료인 골연령 체력 표준지표를 개발하였다.

황해는 유엔해양법협약 제123조에서 다루는 반폐쇄해로 한국-중국-북한이 주요 연안국이다. 황해는 UN이 지정하는 66개의 광역해 양생태계 중 하나로 자원적 가치가 큰 해역이다. 동 협약 제194조에 따라 자원의 사용 및 수익에 관한 연안국의 권리행사는 국가들 간 직접적 또는 지역기구를 통한 간접적 형식의 협력을 통하여 해양환경보호 및 보전에 관한 권리의무를 이행하는 범위 내에서 이뤄져야 한다. 따라서 월경성 환경오염원의 방지대책에 대한 연안국 사이의 법적 공백은 시의성 있게 다뤄져야 할 사안이다. 이와 관련하여 황해광역해양생태계 (YSLME)는 유엔개발계획(UNDP)의 프로젝트로 2기 사업까지 진행되어왔다. 이 과정에서 황해연안생태계에 대한 한·중 공동과학조사를 통한 월경성진단분석(TDA) 그리고 TDA를 바탕으로 한 전략활동계획(SAP) 수립이라는 성과도 있었지만 북한의 참여가 보장되지 못하였고 SAP의 이행에 관한 실효성 있는 관리체제의 부재라는 한계가 있었다. 이에 본 논문에서는 제3기 YSLME 프로젝트가 나아가야 할 방향으로 연안국 간 구속력 있는 조약체결 방안에 관한 연구를 목적으로 한다. 본 연구는 기존 와덴해 삼국 지역협정 성공요소 분석을 통해 한·중·북 지역협력체의 설립과 운영에 관한 단계적 조약화 방안의 타당성을 검증하였다. 단계적 방안을 살펴보면 선행적으로 삼국 공동선언을 통한 ‘황해삼국협력 위 원회의 설립’, ‘황해삼국협력관리 협정(trilateral treaty) 체결’, 골격조약(umbrella convention)을 모(母)조약으로 하는 ‘이행협정(Implementing Arrangement) 체결’의 3단계로 구분하여 볼수 있다. 단계적 입법을 통해 민감한 정치적 변수가 발생하여도 북한의 안정적 참여 유도와 사회 전 계층의 자발적 참여를 통해 황해해양오염 방지 및 대응에 관한 조약의 지속성 및 일관성을 담보할 수 있을 것이라 기대된다.

In the flux used in the batch galvanizing process, the effect of the component ratio of NH₄Cl to ZnCl₂ on the microstructure, coating adhesion, and corrosion resistance of Zn-Mg-Al ternary alloy-coated steel is evaluated. Many defects such as cracks and bare spots are formed inside the Zn-Mg-Al coating layer during treatment with the flux composition generally used for Zn coating. Deterioration of the coating property is due to the formation of AlClx mixture generated by the reaction of Al element and chloride in the flux. The coatability of the Zn-Mg-Al alloy coating is improved by increasing the content of ZnCl2 in the flux to reduce the amount of chlorine reacting with Al while maintaining the flux effect and the coating adhesion is improved as the component ratio of NH4Cl to ZnCl2 decreases. Zn-Mg-Al alloy-coated steel products treated with the optimized flux composition of NH₄Cl•3ZnCl₂ show superior corrosion resistance compared to Zn-coated steel products, even with a coating weight of 60 %.

The purpose of this study is to develop a zirconium-based alloy with low modulus and magnetic susceptibility to prevent the stress-shielding effect and the generation of artifacts. Zr-7Cu-xSn (x = 1, 5, 10, 15 mass%) alloys are prepared by an arc melting process. Microstructure characterization is performed by microscopy and X-ray diffraction. Mechanical properties are evaluated using micro Vickers hardness and compression test. The magnetic susceptibility is evaluated using a SQUIDVSM. The average magnetic susceptibility value of the Zr-7Cu-xSn alloy is 1.176 × 108 cm3g1. Corrosion tests of zirconiumbased alloys are conducted through polarization test. The average Icorr value of the Zr-7Cu-xSn alloy is 0.1912 A/cm2. The elastic modulus value of 14 ~ 18 GPa of the zirconium-based alloy is very similar to the elastic modulus value of 15 ~ 30 GPa of the human bone. Consequently, the Sn added zirconium alloy, Zr-7Cu-xSn, is very interesting and attractive as a biomaterial that reduces the stress-shielding effect caused by differences of elastic modulus between human bone and metallic implants. In addition, this material has the potential to be used in metallic dental implants to effectively eliminate artifacts in MRI images due to low magnetic susceptibility.

In 2020, the diversity of benthic macroinvertebrate communities was investigated in the Sohan stream, an ecological and landscape conservation area, and the results were compared with the previous research conducted in 2011. In total, 42 species (two phyla, three classes, and seven orders) were found in the Sohan stream. Species richness and abundance sharply decreased at all sampling sites because of Typhoons Haishen and Maysak in 2020, which had a direct impact on the stream. In the functional feeding group, the ratio of collector-gatherers was the highest at all sampling sites. However, during the autumn season, the shredder ratio increased from 13.4% to 42.4% in the uppermost stream site. Compared with the diversity of benthic macroinvertebrates surveyed in 2011, a total of 53 species (two phyla, three classes, and eight orders) were found. The percentage of species richness and abundance of Ephemeroptera, Plecoptera, and Trichoptera was more than 50% both in 2011 and 2020. Only the richness of Ephemeroptera was significantly different between them (2011: 2.9 and 2020: 6.7). In this study, the abrupt changes of species richness and abundance in benthic macroinvertebrate were not observed before and after the designation of an ecological and landscape conservation area. However, it is necessary to monitor benthic macroinvertebrates in order to confirm that biodiversity is continuously maintained long after the designation of the ecological and landscape conservation area.

An ecological niche is defined as the specific role of a species influenced by time, space, and other resources. By investigating overlaps between ecological niches of different species, we could estimate the degrees of interspecific competition. Such studies often use geographic information systems (GIS) to discover niche overlaps between species. In this study, we used GIS to estimate the spatial niches of two Korean frog species (Pelophylax nigromaculatus and P. chosenicus). This enabled us to predict their geographic distributions in order to identify their coexistence regions and distribution patterns. The results confirmed that altitude was an important variable for predicting their distribution, with a correlation with their climatic range. Spatial distributions of the two frog species were highly overlapped, as the distribution range for P. nigromaculatus included most of the range of P. chosenicus, showing a sympatric distribution pattern. Within the coexisting regions, however, the presence sites for the two species did not overlap, implying weak competition. To confirm the principal factors influencing their competitive relationship and reasons for their sympatric distribution pattern, we need more detailed in-depth studies on the diverse environmental variables within the regions where the two species coexist. By doing so, we would be able to identify various mechanisms for avoiding competition in sympatric frog species.

Airborne bacteria are expected to float in the mushroom cultivation house, as it is a special environment with high humidity and high temperatures. Their concentration and diversity in the indoor air of the cultivation house could effect the health of farmers and the quality of mushrooms. To examine whether microbiota of airborne bacteria change from year to year, we measured the indoor temperature, humidity, and airborne bacterial concentration from mushroom cultivation houses located in six regions in Korea from 2020 to 2021, and isolated and identified airborne bacteria. The surveyed data were compared and the bacterial diversity of the 1st year and the 2nd year were determined. Based on the average temperature and humidity data surveyed, it can be seen that the temperature and humidity environment in the cultivation houses is such that bacteria can easily reproduce. It was observed that the temperature inside the cultivation houses tends to be higher or lower depending on the season and correlates with the temperature outside the cultivation houses. In the first year survey, 32 species of 20 genera were identified, and in the second year survey, bacteria belonging to 29 species of 22 genera were identified. Among them, the most detected species were all species belonging to the genus Bacillus. There were only three species (Bacillus altitudinis, Brevibacterium frigoritolerans, and Staphylococcus epidermidis) that were continuously isolated in common. Our results showed that the species of floating bacteria greatly vary from year to year even for the same cultivation houses.

A pump-type eDNA filtering system that can control voltage and hydraulic pressure respectively has been developed, and applied a filter case that can filter out without damaging the filter. The filtering performance of the developed system was evaluated by comparing the eDNA concentration with the conventional vacuum-pressured filtering method at the catchment conduit intake reservoir. The developed system was divided into a voltage control (manual pump system) method and a pressure control (automatic pump system) method, and the pressure was measured during filtering and the pressure change of each system was compared. The voltage control method started with 65 [KPa] at the beginning of the filtering, and as the filtering time elapsed, the amount of filtrate accumulated in the filter increased, so the pressure gradually increased. As a result of controlling the pressure control method to maintain a constant pressure according to the designed algorithm, there was a difference in the width of the hydraulic pressure fluctuation during the filtering process according to the feedback time of the hydraulic pressure sensor, and it was confirmed that the pressure was converged to the target pressure. The filtering performance of the developed system was confirmed by measuring the eDNA concentration and comparing the voltage control method and the hydraulic control method with the control group. The voltage control method obtained similar results to the control group, but the hydraulic control method showed lower results than the control group. It is considered that the low eDNA concentration in the hydraulic control method is due to the large pressure deviation during filtering and maintaining a constant pressure during the filtering process. Therefore, rather than maintaining a constant pressure during filtering, it was confirmed that a voltage control method in which the pressure is gradually increased as the filtrate increases with the lapse of filtering time is suitable for collecting eDNA. As a result of comparing the average concentration of eDNA in lentic zone and lotic zone as a control group, it was found to be 96.2 [ng μL-1] and 88.4 [ng μL-1l], respectively. The result of comparing the average concentration of eDNA by the pump method was also high in the lentic zone sample as 90.7 [ng μL-1] and 74.8 [ng μL-1] in the lentic zone and the lotic zone, respectively. The high eDNA concentration in the lentic zone is thought to be due to the influence of microorganisms including the remaining eDNA.

도로협곡에서의 수목식재에 따른 보도 내 교통유발 대기오염도 변화를 살펴보기 위해 오픈소스 전산유체역학 코드 FDS(Fire Dynamics Simulator)를 사용하여 수목 투과지수, 식재 위치 및 유형에 따른 영향을 조사하였다. 광범위한 시뮬레이션을 통해 1) 관목층 만으로만 구성된 사례, 2) 관목층과 아교목층으로 구성된 사례 및 3) 관목층과 교목층으로 구성된 사례를 포함하는 400개의 시나리오 사례 중 399개 사례에 대해 유효한 데이터를 생성하였다. 분석결과, 보도 위에서 관찰되는 평균화된 정상상태 대기오염 농도는 식재유 형과는 무관하게 수목식재 후 약 10% 이상 감소하는 것으로 나타났다. 가장 큰 대기오염 감소효과는 관목층만으로 구성된 사례에서 관찰되었는데 대략 45%까지 감소하는 것으로 나타났다. 이러한 감소효과는 차선에서 인도로 대기오염물질을 직접 수송하는 선회류가 관목층에 의해 유리한 방향으로 변형되는 물리적 과정에 기초한다.

A laboratory-scale experiment was conducted to evaluate the effect of supplementing commonly used effective microorganisms on the chemical properties of swine liquid manure. Effective microorganisms used in this study were Bacillus subtilis (1.3×109 colony-forming unit (CFU)/ml), Enterococcus faecium (1.9×1010 CFU/ml), Aspergillus oryzae (2.0×109 CFU/ml), Saccharomyces cerevisiae (6.4×109 CFU/ml), Rhodobacter sphaeroides (1.2×108 CFU/ml), and Streptomyces griseus (6.2×108 CFU/ml). Swine liquid manure collected and decanted from a swine farm was used in this study. Treatments included control (distilled water supplementation), Treatment 1 (T1) (mixed microbes, 109 CFU/ml), and Treatment 2 (T2) (mixed microbes, 107 CFU/ml). Microbial mix was supplemented every 3.5 days and aerated six times (15 min each) a day to facilitate compositing. Ten ml of sample was collected at 2-, 4-, 6-, and 7-week intervals for the measurement of pH, ammonia-N, volatile fatty acid (VFA), total nitrogen, total phosphorus, and total potassium. At seven weeks, samples were further collected to analyze biochemical oxygen demand (BOD) and chemical oxygen demand (COD). Ammonia-N was significantly (p<0.05) decreased in T1 and T2 by 36% and 30%, respectively, compared with control (23%). VFAs including butyrate, iso-butyrate, valerate, iso-valerate, and caproate were not detected in T1 from the four-week aerated sample. The BOD and COD were significantly (p<0.05) decreased in T1 by 96% and 58%, respectively. In conclusion, ammonia-N, VFA, BOD, and COD, known as odor indicators, were decreased in T1 and T2 compared with control, suggesting that effective microorganisms are useful for compositing swine liquid manure