This study evaluates adhesion strength under various conditions to ensure adhesion performance during asphalt-pavement maintenance. The adhesion performance of a tack coat varies under various conditions. Therefore, to evaluate its curing behavior, several tests, i.e., evaporation residue rate, tracking, tack-lifter, and shear bond strength tests, were conducted based on the type, amount, and curing time of the tack coat.The result of the evaporation residue rate test shows that, except for the SSC tack coat, RSC-4 and modified tack coats require similar curing times, even though the modified tack coats have a lower moisture content. Additionally, based on the evaporation residue rate, the tracking and track-lifter test results show that approximately 75% curing is required to prevent the loss of the tack coat during asphaltpavement maintenance. After maintenance work is completed, the shear bond strength was measured to evaluate the curing properties of the tack coat. The results show that the amount applied, curing degree, and shear bond strength are proportional, whereas the modified tack coat indicate a significant difference in the strength increase rate depending on the curing degree. Additionally, when dust is attached to the surface of the tack coat, the difference in strength exceeds 20%, depending on the attachment ratio.To achieve the best adhesion performance by the tack coat during maintenance work, the loss of the tack coat should be prevented by implementing the exact curing time determined experimentally, regardless of whether the tack coat is modified, and the surface where the tack coat is applied should be cleaned before application.

Pepper cultivation requires a great amount of manual labor, especially for varieties needing support stakes to prevent them bending or breaking in heavy winds or rain. In Korea, it is recommended to secure support stakes and string lines carefully, so as to minimize the risk of damage caused by typhoons. The harvesting of peppers is a labor-intensive process with low rates of mechanization.The removal of stakes is particularly time-consuming during mechanical harvesting, and lodging is a major issue during cultivation and mechanical harvesting. Given increased mechanization during pepper harvesting, it is important to consider these issues when undertaking variety development and cultivation method improvements. Further research and development are required to improve cultivation practices and develop pepper varieties that are more resistant to lodging. Therefore, this study aimed to investigate the impact of different cultivation methods on pepper lodging, thus broadening our knowledge on the desirable architecture of pepper plants required for lodging tolerance.

During wartime, the operation of engineering equipment plays a pivotal role in bolstering the combat prowess of military units. To fully harness this combat potential, it is imperative to provide efficient support precisely when and where it is needed most. While previous research has predominantly focused on optimizing equipment combinations to expedite individual mission performance, our model considers routing challenges encompassing multiple missions and temporal constraints. We implement a comprehensive analysis of potential wartime missions and developed a routing model for the operation of engineering equipment that takes into account multiple missions and their respective time windows of required start and completion time. Our approach focused on two primary objectives: maximizing overall capability and minimizing mission duration, all while adhering to a diverse set of constraints, including mission requirements, equipment availability, geographical locations, and time constraints.

During wartime, the operation of engineering equipment plays a pivotal role in bolstering the combat prowess of military units. To fully harness this combat potential, it is imperative to provide efficient support precisely when and where it is needed most. While previous research has predominantly focused on optimizing equipment combinations to expedite individual mission performance, our model considers routing challenges encompassing multiple missions and temporal constraints. We implement a comprehensive analysis of potential wartime missions and developed a routing model for the operation of engineering equipment that takes into account multiple missions and their respective time windows. Our approach centered on two primary objectives: maximizing overall capability and minimizing mission duration, all while adhering to a diverse set of constraints, including mission requirements, equipment availability, geographical locations, and time constraints.

해양산업시설에서는 많은 종류의 유해물질의 배출 가능성이 존재하기 때문에 이에 대한 체계적인 대응체계가 필요하다. 그 중 연속자동 측정이 가능하면서 ppb 수준의 낮은 검출하한 (limit of detection:LOD)를 갖는 센서 구현은 매우 중요하다. 이를 위해 본 연구에서 는 활성탄소(carbon black)와 Indium tin oxide (ITO) 나노입자를 혼합한 film의 표면저항의 변화를 이용한 고성능 센서 제안 및 구현을 위해 성능인자를 최적화하였다. 센서 구조는 접촉 면적과 전극 간격을 최적화하였다. 접촉 면적이 증가하면 감도, LOD 성능이 향상되었으며 60 mm2에서 최적화되었다. 또한, 전극 간격은 접촉 면적을 일정하게 유지한 상태에서 변화시켰으며 센서 응답은 전극 간격이 감소함에 따라 증가하는 것을 확인하였다. 마지막으로 센서 표면에서의 유해물질의 잔류시간 증가를 위해 화학흡착제를 적용하였다. 화학흡착제는 유해 물질을 선택적으로 흡수할 수 있는 polyester계를 선택하였다. 그 결과 농도가 증가함에 따라 응답이 선형적으로 증가하여 센서로 활용이 가능한 것을 확인하였다. 이러한 3가지의 방법을 통해 센서를 제작하였을 때 액상 유해물질을 기존 센서의 LOD(89.9 ppb)와 비교 10~40 ppb 정도의 낮은 농도를 검출할 수 있는 센서를 구현하였다.

In this study, an accelerated weathering test was performed to examine the variation of thermal insulation performance according to the service life. A widely used class 1 thermal screen (matt georgette + polyethylene (PE) foam + chemical cotton + felt + matt georgette) was selected as the target thermal screen. The ultraviolet irradiation that reached the target thermal screen specimen (60 x 60cm) was 5mW/cm2. Thus, the ultraviolet irradiance was set to 5mW/cm2, and the exposure periods of accelerated weathering conditions on the specimens were set to 0, 282, 847, and 1412h. The radiation exposure periods of the weathering conditions for 0, 282, 847, and 1412h indicate the amount of ultraviolet accumulation for 0, 1, 3, and 5years, respectively. In the accelerated weathering test, the target specimens that completed each exposure phase were subjected to the hotbox test to analyze their thermal insulation performances. Consequently, the thermal insulation performance of the multi-layer thermal screen was estimated to degrade rapidly after approximately two years. In the accelerated weathering condition, a quadratic function model was used to calculate the expected service life, since it adequately described the variation in thermal insulation of the thermal screen according to time. The results showed that when the thermal insulation performance degraded by 5, 10, 20, and 30%, the expected service lives were 2.5, 3.3, 4.5, and 5.5years, respectively.

Due to the strengthening of domestic and international environmental regulations, the replacement of FRP ships with aluminum ships for small ships is continuously in progress. Domestic aluminum ships are being applied to various types of ships, mainly special ships, passenger ships and fishing ships. Gas metal arc welding(GMAW) is used as a welding method when manufacturing ships using aluminum materials for ships with a thickness of 5mm or more. However, it is carried out manually by the workers in the shipyard, and there is a limit to relying on the skills of the workers. In this study, basic research on high-efficiency tandem welding was performed as a basic study for the application of high-quality automatic welding equipment when working on aluminum ships. In this study, welding deformation according to constraint conditions was comparatively analyzed using tandem welding equipment and cross-sections of welds were evaluated for each experiment.

Hierarchically porous carbon materials with high nitrogen functionalities are extensively studied as highperformance supercapacitor electrode materials. In this study, nitrogen-doped porous carbon textile (N-PCT) with hierarchical pore structures is prepared as an electrode material for supercapacitors from a waste cotton T-shirt (WCT). Porous carbon textile (PCT) is first prepared from WCT by two-step heat treatment of stabilization and carbonization. The PCT is then nitrogendoped with urea at various concentrations. The obtained N-PCT is found to have multi-modal pore structures with a high specific surface area of 1,299 m2 g−1 and large total pore volume of 1.01 cm3 g−1. The N-PCT-based electrode shows excellent electrochemical performance in a 3-electrode system, such as a specific capacitance of 235 F g−1 at 1 A g−1, excellent cycling stability of 100 % at 5 A g−1 after 1,000 cycles, and a power density of 2,500 W kg−1 at an energy density of 3.593 Wh kg−1. Thus, the prepared N-PCT can be used as an electrode material for supercapacitors.

본 연구에서는 광화학 대기질 모델인 CMAQ을 활용해 화력발전소 배출량 제거에 따른 O3 농도의 변화 특성을 분석하였다. 하동 화력발전소를 대상으로 주변 지역의 O3 농도 변화에 대한 발전소 배출량의 영향을 조사하기 위해 하 동 화력발전소의 배출량 제거 전과 후의 CMAQ 수치 모의를 수행하였다. 수치 모의 결과 O3의 주요 전구 물질인 NOx (-18.87%)와 VOCs (-11.27%)의 농도가 감소한 반면에 O3 (25.24%)의 농도는 증가한 것으로 나타났다. 화력발전소 배출량 제거로 인한 NO와 O3 농도의 상대적인 변화를 비교해 본 결과 높은 음의 상관관계(R= -0.72)를 나타내는 것이 확인되었다. 이러한 결과는 O3의 농도 증가가 NO 농도 감소로 인한 O3의 적정 효과 완화로 설명 될 수 있음을 의미한 다. 해당 지역의 O3의 농도 증가가 NO의 농도 감소에 주로 영향을 받은 이유는 해당 지역이 VOC-limited (i.e., NOxsaturated) 지역이기 때문으로 분석되었다. 이러한 결과는 특정 지역의 O3의 농도가 단순히 배출량의 증감에 따라 비례하게 나타나지 않을 수 있다는 것을 암시한다. 따라서 화력발전소 배출량 저감 조치로 인한 대기 중 O3 농도 개선 효과를 정확히 예측 및 평가하기 위해서는 지역 별 O3의 생성 및 소멸 기작에 대한 심도 있는 이해가 필요하다.

Cognitive impairment is considered to be key research topics in the field of neurodegenerative diseases and in understanding of learning and memory. In the present study, we investigated neuroprotective effects of Schisandra chinensis (SC) and Ribes fasciculatum (RF) extracts in hydrogen peroxide-induced neuronal cell death in vitro and scopolamine-induced cognitive impairment in Sprague Dawley® (SD) rat in vivo. Apoptotic cell death in neuroblastic PC12 cell line was induced by hydrogen peroxide for 1 hour at 100 μM. However, mixture of SC and RF treatment prevented peroxide induced PC12 cell death with no neurotoxic effects. For in vivo experiment, the effect of SC and RF extracts on scopolamine-induced cognitive impairment in SD rat was evaluated by spontaneous alternation behavior in Y-Maze test. After 30 min scopolamine injection, the scopolamine-induced rats presented significantly decreased % spontaneous alteration and acetylcholine level, compared to non-induced group. However, treatment of SC+RF extracts rescued the reduced % spontaneous alteration with acetylcholine concentration from hippocampus in scopolamineinduced rats. These results suggested that mixture of SC and RF extract may be a potential natural therapeutic agent for the prevention of cognitive impairment.

본 연구에서는 고설 딸기 관부(크라운부) 난방시스템을 전기 온수 보일러, 축열조, 순환 펌프, 관부난방 배관 (백색 연질 PE관, 관경 16mm) 및 온도 제어반으로 구성하였다. 관부(크라운부) 난방의 경우 난방 배관을 딸기 관부에 최대한 밀착될 수 있도록 설치하고 배관 위치를 원예용 고정핀으로 고정하였다. 또한 관부 난방시스템의 에너지 효율을 증진하기 위해 축열조 온수 온도를 20~23oC, 관부 온도를 13~15oC로 관리하였다. 관부난방은 전기 온수보일러를 이용하여 20~23oC의 온수를 축열조에 저장하고 순환펌프를 제어하기 위한 온도 센서를 딸기의 관부에 최대한 근접하여 설치하고 온도를 감지함 으로써 관부(크라운부)를 집중적으로 난방하는 방식이다. 시험 온실의 난방 처리는 공간 난방 4oC + 관부난방(처 리 1), 공간 난방 8oC (대조구), 공간 난방 6oC + 관부 난방(처리 2)로 처리하였다. 각 난방처리는 온실 1동에 딸기를 980주를 심었으며, 재배방법은 표준재배법에 준해서 재배하였다. 난방 에너지 소비에 대한 비교시험은 2017년 11월 8일부터 2018년 3월 30일까지 수행되었다. 소비된 누적 전력량은 등유 사용량으로 환산하였고, 등유 소비량은 공간난방 8oC(대조구)의 경우 1,320L (100%), 공간난방 4oC + 관부난방의 경우 928L(70.3%), 공간난방 6oC + 관부난방의 경우 1,161L (88%)로 계측 되었다. 공간난방 4oC + 관부난방(처리 1) 및 공간난방 6oC + 관부난방(처리 2)은 8oC 공간난방(대조구)에 비해 생육 저하, 수확시기의 지연 등이 없이 비슷하게 딸기 수확이 가능하였으며, 29.7% 및 12%의 난방 에너지가 절감되는 것으로 분석되었다.