In this study, an experimental analysis of noise reduction in road traffic by applying the Micro Grooving technique to concrete highway pavements is explored. Initiated in 1984 to address the aging and damage issues observed in South Korea's concrete highways, Micro Grooving is known for creating fine grooves on the cement pavement surface to increase friction, prevent hydroplaning, and inhibit ice formation, while reducing vehicle friction noise by 3∼5dB(A). It is determined from noise measurement results that the application of the Micro Grooving method can be expected to reduce roadside noise and enhance the safety of drivers' driving experience.

본 연구는 산업화 유망 식물인 회화나무의 이차대사산물 대량생산용 캘러스 확보에 필요한 기초조건을 확인하고자 수행하였다. 기내 배양한 회화나무 하배축을 2.0 mg·L-1 NAA + 0.1 mg·L-1 TDZ 배지에서 배양하였을 때 유백색의 부드러운 캘러스가 형성되었고, 캘러스 형성률 100±0.0%, 캘러스 형성에 걸리는 기간 7.1±0.03일, 캘러스 무게 249.8±12.73 mg으로 가장 효과적임을 확인하였다. 또한, 하배축에서 유도한 캘러스는 백색광 조건의 1.0 mg·L-1 IBA + 0.1 mg·L-1 TDZ 처리 배지에서 배양하였을 때 연노란색의 단단한 캘러스가 다량으로 형성되었고, 캘러스 생체중 186±5.4 mg, 면적 40.6±1.6 mm2으로 가장 무겁고, 크기가 우수한 것을 확인하였다. 기내 배양한 캘러스 소재 추출물의 추출수율은 50% 에탄올 추출 시 59%, 물 추출 시 54%로 확인하였고, 추출물 내 유효성분으로 마키아인 함량은 1.68 mg·g-1으로 검출되었다. 본 연구의 결과는 산업화 식물로써 유망있는 수종인 회화나무의 기내 대량증식과 이차대사산물 생산성을 향상할 수 있는 위한 기초자료로 활용할 수 있을 것이다.

본 연구는 기업의 국제화 수준이 기업 간 제휴 파트너로서의 매력도를 증가시키는지 검증해 보고자 하였다. 이 와 더불어 기술적 역량과 기업집단 소속여부가 국제화 수준과 기업 간 제휴형성 사이의 관계를 강화시키는지도 함께 검증하였다. 가설의 검증을 위해 1997년 기준 코스닥 등록기업 리스트를 토대로 1997년부터 2014년까지 국내 242개 제조업체에서 수집한 3,546개의 쌍체 표본 자료(dyadic data)를 구성하였다. 음이항 회귀분석 (negative binominal regression)을 사용한 실증분석 결과, 국제화 수준이 기업간 제휴형성에 긍정적인 영향을 미칠 것이라는 본 논문의 가설이 지지된다는 것을 확인할 수 있었다. 한편, 기술적 역량과 기업집단 소속여부는 기업 간의 제휴형성에 긍정적인 영향을 미치는 것이 확인되었으나 국제화 수준과 기업 간 제휴형성 사이에서의 조절효과는 나타나지 않았다. 본 논문의 결과에 따르면, 제휴 파트너 선택 과정에서 국제화 수준이라는 지표는 제휴 파트너 기업의 내부 역량에 대한 긍정적인 신호로 작용하여 조직 장(organizational field) 내에서의 잠재 적 제휴 파트너로서의 정당성을 획득하는 수단이 될 수도 있음을 시사한다. 본 논문은 국제화 수준이라는 지표가 오디언스(audience)로 하여금 해당 조직의 내부역량에 대한 긍정적 기대효과를 유발할 수도 있음을, 실제 기업 간의 전략적 제휴라는 상황적 맥락을 바탕으로 이론화하고 이를 실증분석 하였다는데 의의가 있다.

Internal combustion engine is the main source of environmental pollutants and therefore advanced technology is required to reduce harmful elements from the exhaust gases all over the world. Especially, when the exhaust gas is released from the automotive muffler, exhaust noise has many bad influence on the surrounding environment. In order to reduce the exhaust noise, it is necessary that automotive muffler must be designed for best exhaust efficiency. The sound insulation room was installed for the analysis of an acoustics characteristics of the noise from automotive muffler, in this study. Exhaust gas noise, noise distribution characteristics, pressure and temperature of exhaust gas were investigated with the change of annulus temperature of air cooled annulus automotive muffler and cooled annulus automotive muffler. The following results were obtained with this study. From the frequency analysis of automotive muffler, high noise distribution was observed in the range 100~2000Hz. It means that the noise in this range has an dominate influence for the overall noise. Noise reduction of automotive muffler was affected by the temperature of annulus. It is caused the result that the high temperature and pressure of exhaust gas are changed lower by the drop of annulus temperature. The tendencies of noise, the temperature and pressure of exhaust gas are similar to the performance curve of engine. Exhaust gas pressure is determined by the r.p.m. of engine and affected by the cooling performance of automotive muffler.

This study was conducted to analyze the effects of stand density on fire fuel (FF) changes in a Chamaecyparis obtusa forest. The study site was located in Mt. Munsu in Jeollabuk-do and consisted of a control, 30% thinning treatment (LT), and 50% thinning treatment (HT). Three-year-old seedlings were planted at a density of 3,000 trees ha-1 in 1976, and thinning was carried out in 2000. FF production was measured every 2 months by installing 3 circular litter traps 1.2 m above the ground. Litter bags containing 5 g of each leaf and branch were made and buried in the organic layer to investigate the FF decomposition rate. The decay constant was calculated after 18 months. FF accumulation was measured by collecting dry-weight organic matter from each plot using a square frame (0.09 m2) in September 2018. The FF production in LT and HT was significantly lower than that of the control (P<0.001). The leaf decay constant for HT was significantly lower than that of the control (P<0.05). The FF accumulation in HT was significantly lower than that of the control (P<0.01), but LT was not significantly different from the control. The results of this study showed that thinning decreased FF production.

PURPOSES : The purpose of this study is to identify the beneficiaries of car-sharing that can utilize autonomous car-sharing services when they are introduced. METHODS : This study was conducted in two stages. The first step was to analyze the characteristics of shared car usage by region and rental time using t-Ttest. The second step was to analyze the beneficiaries of autonomous car-sharing services if they are introduced. The beneficiaries were derived using parking time and survey data. RESULTS : Car-sharing behavior showed statistically different usage characteristics by region and rental period. However, the distance traveled per trip for short trips was similar. When the autonomous car sharing service with free return and rental is introduced, 31% (Jeju) to 38% (Daejeon) of short-term renters and 50 to 52% of long-term renters are expected to benefit. CONCLUSIONS : When introducing autonomous car-sharing services, it is necessary to establish a shared car strategy that reflects the characteristics of car-sharing use by region and rental period. In particular, in Jeju Island, where the rental time is relatively longer than Daejeon, the introduction of autonomous car-sharing services will contribute to reducing the cost of shared vehicles in terms of cost.

This study investigates the integration of astronomy-related topics in the Korean national science curricula spanning from 1945 to 2023. We analyze the placement and extent of astronomy content across different school levels. Astronomy contents in the science curricula have changed in response to social needs (e.g., practical knowledge required for agriculture and fishery) and advancement in astronomical research (e.g., the discovery of exoplanets and the suggestion of new cosmological parameters). Contents addressing the motions of celestial objects and stellar physical properties have remained relatively consistent. In the latest 2022 revised national curriculum, scheduled for implementation in 2024, several elements, such as coordinate systems, have been removed, while the inquiry activities using digital tools are emphasized. The incorporation of the cosmic perspectives in the national curriculum, as well as astronomy education within the context of education for sustainable development, remains limited even in the most recent curriculum. For future life revisions, the active participation of researchers is needed to reflect the latest astronomical research progress and scientific characteristics in the field of astronomy.

본 연구는 국내 유통 조미건어포 27건 중 프로피온산, 안 식향산, 소브산 함량을 분석하였다. 식품의약품안전처 식 품공전의 분석 방법으로 GC-FID를 이용하여 프로피온산 을 분석하였고 HPLC-DAD를 이용하여 안식향산과 소브 산을 분석하였다. 그 결과 총 27건 중 프로피온산은 16건 (검출률 59%), 안식향산은 불검출, 소브산은 7건(검출률 26%)이 검출되었다. 조미건어포에서 프로피온산은 ND- 125.10 mg/kg의 농도로 검출이 되었으며 이는 미생물 최 소저해농도 이하의 수치로 보존 효과를 나타낼 수 없는 농도로 보여 의도적으로 첨가되지는 않았을 것으로 사료 된다. 또한, 소브산의 경우 소르빈산 칼륨이 표기된 시료 에서만 검출되었으며 표기된 시료 8건 중 7건에서만 검출 이 되었다. 소브산 검출 시료의 경우 658.18 mg/kg의 농도 까지 검출이 되었으며, 이는 그 사용 기준에 적합한 수치 였다. 본 연구는 향후 조미건어포에 대한 안전 관리를 위 한 기초자료로 사용될 수 있을 것으로 사료된다.

Cucurbita is one of the crops with high demand in the world. Securing breeding sources is crucial and fundamental to any plant breeding program. This study was conducted to investigate the characterization of phenotypic traits and phylogenetic classification of germplasm provided by the National Agrobiodiversity Center of RDA. Fourteen phenotypic traits were measured in 199 accessions of Cucurbita germplasm. Among these germplasm, 92 accessions of C. moschata, 34 accessions of C. maxima, and 73 accessions of C. pepo were classified using the KASP marker from the Seed Industry Center. It was confirmed that there were five classifications in C. moschata, five in C. maxima and four in the C. pepo. The results of this study provide fundamental data on Cucurbita germplasm and are expected to be useful in breeding programs.

This paper investigates the effects of aspect ratio and volume fraction of hooked-end normal-strength steel fibers on the compressive and flexural properties of high-strength concrete with specified compressive strength of 60 MPa. Three types of hooked-end steel fibers with aspect ratios of 64, 67 and 80 were considered and three volume fractions of 0.25%, 0.50% and 0.75% for each steel fiber were respectively added into each high-strength concrete mixture. The test results indicated that the addition of normal-strength steel fibers is effective to improve compressive and flexural properties of high-strength concrete but fiber aspect ratio had little effect on the modulus of elasticity and compressive strength. As steel fiber content and aspect ratio increased, flexural beahvior of notched high-strength concrete beams was effectively improved.

Metal material production process machinery is becoming larger due to the development of industry. Since there are many overseas manufacturers of large machines used in industrial fields, there are limitations in investigating the manufacturer's noise prediction method and measurement method. A noise map was prepared to obtain information necessary for noise reduction and to effectively manage noise companies. It was modeled with the drawings provided to prepare the noise map and the results of the actual measurement of the site. In order to improve the noise environment of workers, there was a noise reduction effect when a soundproof wall was installed between the noise source and the worker's workplace.

This study was conducted to explore the change in the market issues on HMR (Home Meal Replacements) using local foods after the COVID-19 outbreak. Online text data were collected from internet news, social media posts, and web documents before (from January 2016 to December 2019) and after (from January 2020 to November 2022) the COVID- 19 outbreak. TF-IDF analysis showed that ‘Trend’, ‘Market’, ‘Consumption’, and ‘Food service industry’ were the major keywords before the COVID-19 outbreak, whereas ‘Wanju-gun’, ‘Distribution’, ‘Development’, and ‘Meal-kit’ were main keywords after the COVID-19 outbreak. The results of topic modeling analysis and categorization showed that after the COVID-19 outbreak, the ‘Market’ category included ‘Non-face-to-face market’ instead of ‘Event,’ and ‘Delivery’ instead of ‘Distribution’. In the ‘Product’ category, ‘Marketing’ was included instead of ‘Trend’. Additionally, in the ‘Support’ category, ‘Start-up’ and ‘School food service’ appeared as new topics after the COVID-19 outbreak. In conclusion, this study showed that meaningful change had occurred in market issues on HMR using local foods after the COVID-19 outbreak. Therefore, governments should take advantage of such market opportunity by implementing policy and programs to promote the development and marketing of HMR using local foods.

Today’s customer service providers, who have the greatest impact on customer satisfaction, are experiencing severe stress and job burnout due to various causes. Unlike general companies, the corporation has a relatively high level of dissatisfaction with customer service since there is a large conflict between the provision of kindness and the reasonable handling of civil complaints according to laws and regulations. In order to analyze the environment of the NPS’ customer service providers, 5.583 branch employees working at the National Pension Service and 407 call center employees were surveyed online using the questionnaire function of the Enterprise resource planning system. The contents of the survey consisted of a survey on customer-facing employees, the level of awareness of customer-facing workers protection measures, and opinions on improvement and supplementation related to customer-facing workers protection measures. As a result of the survey, 72.8% of the total respondents experienced grievance complaints, and the proportion of call center employees was even higher at 89.0%. In addition, both the branch and the call center had the largest share of complaints about obstruction of business, unreasonable demands, abusive language, and verbal abuse. More than 40% of call center employees in their 20s and 30s experienced the highest frequency of complaints 13 or more times a year. The most difficult thing in the process of responding to complaints was that both branch offices and call centers had insufficient psychological recovery time, lack of space, and lack of help from colleagues and superiors. Based on the survey analysis, it is suggested to establish a countermeasure through case analysis rather than the right to suspend work for civil complaints that cannot be handled, such as customized manuals and action strategies for the age group with high grievance complaints.

The main noise of a large machine can be divided into the noise generated during the work process and the noise of the equipment used in the work. The main noise in the noisy area is the air propagation sound caused by the operation of the rotating body. This is not fixed, but changes depending on the situation at the time of measurement. Workplaces exposed to noise can harm workers' health and cause related industrial disasters, resulting in many complaints and social problems, and eventually lead to a lot of damage in terms of productivity. Large machines that need noise reduction the most are motors, pumps, fans, blowers, and compressors. To reduce noise, mechanical structure or material changes are most effective. In this study, the noise reduction method and noise management method of large machines were investigated. To measure noise, the same method as ISO 3744 in Europe and JISA 8305 in Japan was used as KS A ISO 3744, KS A ISO 3746, which is a method of measuring the acoustic power level of machinery.

Due to the development of the industry, the machinery of plant facilities becomes large and operates at high speed and high power. Workers at plant facility sites are exposed to high noise and impact noise, and the number of people with noise-induced hearing loss is increasing every year. Therefore, in order to minimize such damage, many efforts have been made to reduce the noise of large machines in production facilities. Measures, education, and recommendation of wearing hearing protectors are needed to protect the hearing of workers in high noise industries. In addition, it is urgent to reduce noise sources by blocking noise propagation paths, such as installing noise boxes and silencers, and installing facilities and equipment that generate less noise. It is necessary to repair the noise reduction device of the large machine of the plant or to study the noise reduction device when designing the plant.

최근 대규모 토목 및 건축 구조물 증가 추세로 건설 부재의 고강도 및 경량화에 대한 수요가 높아지고 있다. 기존 시멘트 경량 복합체의 경우 단위 체적 중량이 낮아 강도 저하 문제가 발생할 수 있다. 보통 경량화를 위해서 시멘트 복합체를 배합할 때 일반 경량골재와 고무재질의 경량골재, 플라스틱 펠릿 등 다양한 인공 경량골재를 적용한 시멘트 복합체로 경량화를 확보할 수 있다. 이 중에서도 시멘트 복합체의 인공 경량골재로 플라스틱을 사용하면 상대적으로 골재 자체의 강도를 확보하면서 경량화를 꾀할 수 있지만 재료의 매끄러운 표면 특성으로 인해 시멘트 페이스트와 부착하는 데 불리한 부분이 있고 이는 콘크리트 골재 또는 시멘트 복합체 골재로서의 사용에 있어 단점이 된다. 띠라서 이번 연구에서는 기존 연구에서 플라스틱 골재 로 가장 적합한 유형으로 확인된 PP, PE 두가지 유형의 플라스틱 골재와 강섬유, 양생방법을 변수로 하여 실험을 진행하였고 실험 결과 플라스틱의 비중이나 표면 재질뿐만 아니라 강섬유의 혼입유무, 양생방법에 의해서 시멘트 복합체의 물리적 특성이 변화된다는 것을 확인하였다.

RHDS 촉매는 코크와 황 화합물 그리고 금속인 바나듐이 표면에 침적되어 비활성화가 된다. 이러한 오염물을 제거하기 위해서 먼저 폐 RHDS 촉매에 묻어있는 중질유분의 세정, 코크와 황 화합물을 고온 배소 처리한 후, 과량으로 침적되어 있는 바나듐의 침출량을 조절하기 위하여 0.5, 1 wt% 옥살산 수용액을 이용하여 초음파 교반기에서 50 ℃, 10 sec 동안 교반하여 NOx 저감을 위한 SCR 촉매로의 적용 가능성을 확인하고자 하였다. 재생처리 한 RHDS 촉매의 성분은 XRF 를 사용하여 분석하였고, 상압 고정층 연속 흐름 반응기 상에서 NOx 저감 성능을 측정하였다. 옥살산 수용액 0.5 wt%, 10 sec 동안 초음파 침출한 촉매가 가장 안 정적인 NOx 저감 성능을 보였으며, 375 ℃ 이상의 고온에서는 상용 촉매와 동등 수준의 NOx 저감 성능을 확인할 수 있었으나 저온영역 200 ℃에서 250 ℃까지는 상용 촉매보다 낮은 NOx 저감 성능을 보였다. 따라서 폐 RHDS 촉매를 재생처리 한 후 분말로 메탈 코로게이트 지지체에 워시코팅한 촉매는 상용 SCR 촉매로서 이용 가능함을 확인하였다.