단순 침전법으로 제조한 CdZnS/ZnO 광촉매를 이용하여 가시광선하에서 메틸렌블루의 광분해 반응에 대한 연구를 수행하였다. X선 회절분석법과 UV-vis 확산반사 분광법 등을 이용하여 제조된 촉매들의 물리화학적 특성을 분석하였다. 그리고 CdZnS/ZnO 광촉매의 활성을 조사하고 CdS 및 TiO2와 비교 검토하였다. CdZnS/ZnO 광촉매는 자외선뿐만 아니라 400nm에서 600nm 범위의 가시광선 영역에 있어서도 우수한 광흡수 특성을 나타내었다. 가시광선하에서 메틸렌 블루의 광분해 반응에 대해서 CdZnS/ZnO 광촉매는 CdS 와 TiO2 보다 우수한 광촉매 활성을 나타내는 것을 알 수 있었다. 그리고 가시광선하에서의 메틸렌블루의 광분해 반응에는 광촉매 반응뿐만 아니라 감광반응도 관여하고 있음을 확인할 수 있었다.

본 연구는 헤이워드 다래나무의 비정상 생장 관련 문제점을 파악하고자, 건전 개체와 비건전 개체 간의 물리·해부학적 특성 및 Calcium Oxalate 형성 특성을 비교분석 하였다. 두 집단 간 밀도와 함수율 등의 물리적 요인과 연륜폭, 도관직경, 도관비율, 방사조직 높이와 너비 등의 해부학적 특성 요인을 비교분석해 본 결과 모든 요인에서 유의적인 차이가 나타났다. 특히 Calcium oxalate 결정은 주로 수피 부분에 여러 개가 다발형태로 다수가 존재하였으나, 도관 주위에서는 출현율이 낮았고, Pith와 목질부에서는 거의 나타나지 않았다. 이러한 Calcium oxalate 결정체는 건전개체(9.0 ×106/g개) 보다 고사가 진행 중인 비건전개체(10.4×106/g)에서 유의적으로 출현빈도가 높게 나타났음을 알 수 있었다.

The surface of silicon dummy wafers is contaminated with metallic impurities owing to the reaction with and adhesion of chemicals during the oxidation process. These metallic impurities negatively affect the device performance, reliability, and yield. To solve this problem, a wafer-cleaning process that removes metallic impurities is essential. RCA (Radio Corporation of America) cleaning is commonly used, but there are problems such as increased surface roughness and formation of metal hydroxides. Herein, we attempt to use a chelating agent (EDTA) to reduce the surface roughness, improve the stability of cleaning solutions, and prevent the re-adsorption of impurities. The bonding between the cleaning solution and metal powder is analyzed by referring to the Pourbaix diagram. The changes in the ionic conductivity, H2O2 decomposition behavior, and degree of dissolution are checked with a conductivity meter, and the changes in the absorbance and particle size before and after the reaction are confirmed by ultraviolet-visible spectroscopy (UV-vis) and dynamic light scattering (DLS) analyses. Thus, the addition of a chelating agent prevents the decomposition of H2O2 and improves the life of the silicon wafer cleaning solution, allowing it to react smoothly with metallic impurities.

Lac 색소의 열수와 메탄올 추출물의 일부 유리아미노산과 그 유도체의 조성 및 함량, phenolic acid와 flavonoid의 조성 및 함량을 분석하고, 일부 피부미용 화장품 생리활성을 조사한 결과는 다음과 같다. 유리아미노산은 열수와 메탄올 추출물에서 각각 검출되지 않았으며, 단백질 비구성 아미노산 유도체는 열수 추출물에서 2종, 메탄올 추출물에서는 3종이 검출되었다. Phenolic acid와 flavonoids의 조성 및 함량분석에서, phenolic acid의 경우 열수 추출물에서 2종, 메탄올 추출물에서 5종이 검출되었다. 또한 flavonoids의 경우 열수 추출물에서는 검출되지 않았으나, 메탄올 추출물에서는 rutin과 taxifolin이 약간 존재하는 것으로 나타났다. DPPH radical 소거 활성은 메탄올 추출물이 40.43 ± 0.21%로 열수 추출물에서보다 약간 높게 나타났고, Tyrosinase 저해 활성은 메탄올 추출물이 열수 추출물에서 보다 약 2배 정도 높은 것으로 나타났다. HaCaT 세포주에 대한 세포독성은 모든 처리 농도에서 나타나지 않았으며, 처리 농도가 증가함에 따라 세포 생장이 증가하는 경향이었다.

본 실험은 삼채에 발생하는 점박이응애의 효율적인 약제방제전략의 기초 자료를 확보하고자 시판되고 있는 10종의 살비제에 대해 약제감 수성과 포장 방제효과를 평가하였다. 점박이응애 암컷 성충에 대한 실내감수성 평가 결과 Abamectin EC, Pyflubumide SC, Cyenopyrafen SC, Acequinocyl SC가 100%의 살비효과를 나타내었고, Pyflubumide SC, Acequinocyl SC, Etoxazole SC는 부화율이 0%로 나타나 100% 의 살란효과를 나타내었다. 실내감수성 평가에서 살비효과가 우수했던 Abamectin EC, Pyflubumide SC, Cyenopyrafen SC, Cyflumetofen SC, Acequinocyl SC를 대상으로 포장검정을 평가한 결과, 약제처리 7일차에서 모든 처리구는 90.3% 이상의 방제가를 나타내었다.

Molybdenum trioxide (MoO3) is used in various applications including sensors, photocatalysts, and batteries owing to its excellent ionic conductivity and thermal properties. It can also be used as a precursor in the hydrogen reduction process to obtain molybdenum metals. Control of the parameters governing the MoO3 synthesis process is extremely important because the size and shape of MoO3 in the reduction process affect the shape, size, and crystallization of Mo metal. In this study, we fabricated MoO3 nanoparticles using a solution combustion synthesis (SCS) method that utilizes an organic additive, thereby controlling their morphology. The nucleation behavior and particle morphology were confirmed using ultraviolet-visible spectroscopy (UV-vis) and field emission scanning electron microscopy (FE-SEM). The concentration of the precursor (ammonium heptamolybdate tetrahydrate) was adjusted to be 0.1, 0.2, and 0.4 M. Depending on this concentration, different nucleation rates were obtained, thereby resulting in different particle morphologies.

Tin oxide (SnO2) nanocrystals are synthesized by a thermal evaporation method using a mixture of SnO2 and Mg powders. The synthesis process is performed in air at atmospheric pressure, which makes the process very simple. Nanocrystals with a belt shape start to form at 900 oC lower than the melting point of SnO2. As the synthesis temperature increases to 1,100 oC, the quantity of nanocrystals increases. The size of the nanocrystals did not change with increasing temperature. When SnO2 powder without Mg powder is used as the source material, no nanocrystals are synthesized even at 1,100 oC, indicating that Mg plays an important role in the formation of the SnO2 nanocrystals at temperatures as low as 900 oC. X-ray diffraction analysis shows that the SnO2 nanocrystals have a rutile crystal structure. The belt-shaped SnO2 nanocrystals have a width of 300~800 nm, a thickness of 50 nm, and a length of several tens of micrometers. A strong blue emission peak centered at 410 nm is observed in the cathodoluminescence spectra of the belt-shaped SnO2 nanocrystals.

Titanium dioxide (TiO2) is a typical inorganic material that has an excellent photocatalytic property and a high refractive index. It is used in water/air purifiers, solar cells, white pigments, refractory materials, semiconductors, etc.; its demand is continuously increasing. In this study, anatase and rutile phase titanium dioxide is prepared using hydroxyl and carboxyl; the titanium complex and its mechanism are investigated. As a result of analyzing the phase transition characteristics by a heat treatment temperature using a titanium complex having a hydroxyl group and a carboxyl group, it is confirmed that the material properties were different from each other and that the anatase and rutile phase contents can be controlled. The titanium complexes prepared in this study show different characteristics from the titania-formation temperatures of the known anatase and rutile phases. It is inferred that this is due to the change of electrostatic adsorption behavior due to the complexing function of the oxygen sharing point, which crystals of the TiO6 structure share.

이 연구는 얼굴 유형에 따른 헤어커트스타일 선호도를 조사하기 위하여 대전·충남지역 여성 276명을 대상으로 설문지를 사용하여 설문조사 하였다. 분석은 통계 처리프로그램인 SPSS(Statistical Package for Social Science) 24.0을 이용하였으며, 결과는 다음과 같다. 얼굴 유형에 따른 헤어커트스타일의 선호도는 둥근형, 삼각형, 장방형 얼굴은 레이어커트스타일(Layered cut style)을 가장 선호하였고, 선호 정도는 둥근형 얼굴 46.7%, 삼각형 32.6%, 장방형 35.1%이었다. 그러나 사각형 얼굴은 스파니엘커트스타일(Spaniel cut style)을 가장 선호하는 것으로 나타났으며, 선호 정도는 54.0%이었다. 이의 결과는 통계적으로 유의한 차이가 있었다(p<.001). 따라서 이와 같은 결과는 얼굴형에 따라 선호하는 헤어커트 스타일에는 차이가 있는 것으로 나타났다.

Zinc oxide(ZnO) micro/nanocrystals are grown via thermal evaporation of ZnO powder mixed with Mn powder, which is used as a reducing agent. The ZnO/Mn powder mixture produces ZnO micro/nanocrystals with diverse morphologies such as rods, wires, belts, and spherical shapes. Rod-shaped ZnO micro/nanocrystals, which have an average diameter of 360 nm and an average length of about 12 μm, are fabricated at a temperature as low as 800 °C due to the reducibility of Mn. Wireand belt-like ZnO micro/nanocrystals with length of 3 μm are formed at 900 °C and 1,000 °C. When the growth temperature is 1,100 °C, spherical shaped ZnO crystals having a diameter of 150 nm are synthesized. X-ray diffraction patterns reveal that ZnO had hexagonal wurtzite crystal structure. A strong ultraviolet emission peak and a weak visible emission band are observed in the cathodoluminescence spectra of the rod- and wire-shaped ZnO crystals, while visible emission is detected for the spherical shaped ZnO crystals.

Tungsten heavy alloys (W–Ni–Fe) play an important role in various industries because of their excellent mechanical properties, such as the excellent hardness of tungsten, low thermal expansion, corrosion resistance of nickel, and ductility of iron. In tungsten heavy alloys, tungsten nanoparticles allow the relatively low-temperature molding of high-melting-point tungsten and can improve densification. In this study, to improve the densification of tungsten heavy alloy, nanoparticles are manufactured by ultrasonic milling of metal oxide. The physical properties of the metal oxide and the solvent viscosity are selected as the main parameters. When the density is low and the Mohs hardness is high, the particle size distribution is relatively high. When the density is high and the Mohs hardness is low, the particle size distribution is relatively low. Additionally, the average particle size tends to decrease with increasing viscosity. Metal oxides prepared by ultrasonic milling in high-viscosity solvent show an average particle size of less than 300 nm based on the dynamic light scattering and scanning electron microscopy analysis. The effects of the physical properties of the metal oxide and the solvent viscosity on the pulverization are analyzed experimentally.

This study was aimed at investigating the levels of the natural preservatives of benzoic, sorbic and propionic acids in cereal grains, nuts and seeds. Benzoic and sorbic acid were analyzed by high-performance liquid chromatography with a diode-array detector (HPLC-DAD) and further confirmed by liquid chromatography-tandem mass spectrometry (LC-MS/MS), whereas propionic acid was analyzed using a gas chromatography-flame ionization detector (GC-FID) and further confirmed by gas chromatography-mass spectrometry (GC-MS). Benzoic, sorbic and propionic acids were found in 44, 22, and 550 samples out of 702 samples, respectively. From the total of 702 samples. The concentrations of benzoic, sorbic and propionic acid were ranged from not detected (ND) to 23.74 mg/L, from ND to 7.90 mg/L, and from ND to 37.39 mg/L in cereal grains, nuts and seeds, respectively. The concentration ranges determined in this study could be used as standard criteria in the process of inspecting cereal grains, nuts and seeds for preservatives as well as to address consumer complaints or trade disputes.

가공식품에서 폴리아크릴산나트륨에 대한 분석 방법을 size-exclusion chromatography를 사용하여 개발하고 유통중인 가공식품에 대해 모니터링 하였다. 분석조건에 대하여 GF-7M HQ column과 UV / VIS 검출기를 피크 모양과 선형성을 기준으로 선택하였으며, 유속, column oven 온도 및 이동상은 각각 0.6 mL/min, 45℃ 및 50 mM sodium phosphate buffer (pH 9.0)으로 선정되었다. 시료의 전처리를 위하여 pH 7.0의 50 mM sodium phosphate buffer로 20℃, 150 rpm에서 3 시간 동안 추출하였다. 확립된 분석법을 검증한 결과 적절한 선택성을 나타내었으며, 검량선은 50~500 mg/L의 범위에서 선정되었고, 이때 검량선의 상관계수(R2)는 0.9985로 나타났다. 폴리아크릴산나트륨의 검출한계(LOD)는 10.95 mg/kg으로 정량한계(LOQ)는 33.19mg/kg의 값을 얻었으며, 정밀도는 intra-day의 경우 3.0~8.3%를, inter day의 경우 1.3~2.6%로 확인되었다. 정확도는 intra-day의 경우 99.6~127.6%를 나타내었으며, interday의 경우 94.3~121.9%로 확인되었다. 유통 중인 가공식품 125품목을 대상으로 폴리아크릴산나트륨의 함유량을 분석한 결과 40품목에서 검출되었으며, 검출량은 식품첨가물공전의 규격인 0.2% 미만으로 검출되었다. 본 연구 결과는 size-exclusion chromatography에 의한 분석방법이 가공식품에서 폴리아크릴산나트륨을 분석하는데 적용할 수 있는 적합한 방법이라는 것을 나타내었다.

ZnO micro/nanocrystals are formed by a vapor transport method. Mixtures of ZnO and TiO powders are used as the source materials. The TiO powder acts as a reducing agent to reduce the ZnO to Zn and plays an important role in the formation of ZnO micro/nanocrystals. The vapor transport process is carried out in air at atmospheric pressure. When the weight ratios of TiO to ZnO in the source material are lower than 1:2, no ZnO micro/nanocrystals are formed. However, when the ratios of TiO to ZnO in the source material are greater than 1:1, the ZnO crystals with one-dimensional wire morphology are formed. In the room temperature cathodoluminescence spectra of all the products, a strong ultraviolet emission centered at 380 nm is observed. As the ratio of TiO to ZnO in the source material increases from 1:2 to 1:1, the intensity ratio of ultraviolet to visible emission increases, suggesting that the crystallinity of the ZnO crystals is improved. Only the ultraviolet emission is observed for the ZnO crystals prepared using the source material with a TiO/ZnO ratio of 2:1.