Exploring highly efficient, and low-cost oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) catalysts is extremely vital for the commercial application of advanced energy storage and conversion devices. Herein, a series of graphene-like C2N supported TMx@C2N, (TM = Fe, Co, Ni, and Cu, x = 1, 2) single- and dual-atom catalysts are designed. Their catalytic performance is systematically evaluated by means of spin-polarized density functional theory (DFT) computations coupled with hydrogen electrode model. Regulating metal atom and pairs can widely tune the catalytic performance. The most promising ORR/OER bifunctional activity can be realized on Cu2@ C2N with lowest overpotential of 0.46 and 0.38 V for ORR and OER, respectively. Ni2@ C2N and Ni@C2N can also exhibit good bifunctional activity through effectively balancing the adsorption strength of intermediates. The correlation of reaction overpotential with adsorption free energy is well established to track the activity and reveal the activity origin, indicating that catalytic activity is intrinsically governed by the adsorption strength of reaction intermediates. The key to achieve high catalytic activity is to effectively balance the adsorption of multiple reactive intermediates by means of the synergetic effect of suitably screened bimetal atoms. Our results also demonstrate that lattice strain can effectively regulate the adsorption free energies of reaction intermediates, regarding it as an efficient strategy to tune ORR/OER activity. This study could provide a significant guidance for the discovery and design of highly active noble-metal-free carbon-based ORR/OER catalysts.

In the “宀” radical of Shuowen Jiezi (說文解字): “家，凥也。从宀，豭省聲。𠖔，古文 家.” Duan Yucai believed that, the character “家” (jia) is composed of the radicals “宀” and “豕”, and should be classified under the radical “豕” instead of “宀”. The so-called “豭省聲” mentioned by Xu Shen is baseless. Based on the research of scholars in the Qing Dynasty, as well as the evidence from oracle bone inscriptions and bronze inscriptions, it can be concluded that “豭” is a newly created character, and its ancient form should be “𢑓”, which is “豕” with an additional semantic stroke indicating a male pig. The original intention of “豭省聲” should be to omit the character form of “叚” while preserve the pronunciation of “叚”. This takes into account both the ideographic character “家” derived from “ (𢑓)” and the phonetic-semantic character “家” derived from “ (豭)”. Duan Yucai proposed the concepts of “the original meaning of character creation” and “the original sense of character usage” to distinguish between the original meaning and the extended borrowed meaning, which is the value of his theory.

This paper presents the construction and characterization of an amperometric immunosensor based on the graphene/gold nanoparticles (AuNPs/GO) nanocomposite for the detection of the bladder cancer biomarker, apolipoprotein A1 (Apo-A1). The morphological analysis of the AuNPs/GO nanocomposite demonstrated an almost spherical shape of AuNPs and the successful coverage of their surface by graphene oxide. An increased G peak and decreased D peak after the association of AuNPs with GO, implied a reduction in graphene defects. The X-ray photoelectron spectroscopy (XPS) indicated a significant decrease in the quantity of oxygen-containing functional groups in the AuNPs/GO nanocomposite, as compared to the original GO. Furthermore, the developed sensor demonstrated commendable sensitivity and selectivity, with a wide linear range for Apo-A1 detection. Importantly, the immunosensor exhibited remarkable stability over a period of 14 days, signifying its potential for practical applications.

Silage inoculants, crucial in modern silage production, comprise beneficial microorganisms, primarily lactic acid bacteria (LAB), strategically applied to forage material during ensiling. This study aimed to compare the effectiveness of various inoculants produced by different companies. Five treatments were evaluated, including a control group: T1 (Lactobacillus plantarum), T2 (Lactobacillus plantarum + Pediococcus pentosaceus), T3 (Lactobacillus plantarum + Pediococcus pentosaceus + Lactobacillus buchneri), T4 (Lactobacillus plantarum + Lactobacillus acidophilus + Lactobacillus bulgaricus), and T5 (Lactobacillus plantarum + Pediococcus pentosaceus + Enterococcus faecium). Italian ryegrass was harvested at the heading stage and treated with these silage inoculants. Samples were collected over a 60-day ensiling period. Co-inoculation with L. plantarum and P. pentosaceus (T2) resulted in significantly higher CP compared to the control group co-inoculation exhibited with resulted in Lactobacillus plantarum and Pediococcus pentosaceus in the T2 treatment exhibited higher CP content of 106.35 g/kg dry matter (DM). The T3 treatment, which included heterofermentative bacterial strains such as Lactobacillus buchneri, exhibited an increase in acetic acid concentration (11.15 g/kg DM). In the T4 treatment group, which utilized a mixed culture of Lactobacillus acidophilus and Lactobacillus bulgaricus, the NH3-N/TN content was observed to be the lowest (20.52 g/kg DM). The T5 containing Enterococcus faecium had the highest RFV (123) after 60 days. Expanding upon these findings, the study underscores not only the beneficial effects of particular inoculant treatments on silage quality but also underscores the potential of customized inoculation strategies in maximizing nutrient retention and overall silage preservation.

Aurantii Fructus Immature (AFI) and Aurantii Fructus (AF) are two important traditional Chinese herbs. As the harvesting time varies, the medicinal value of the plants is not uniform. Consequently, it has been difficult to quickly recognize them within the realm of traditional Chinese medicine. Separation and detection technologies are employed in combination to create fingerprints for identification. We proposed the utilization of graphene-assisted electrochemical fingerprint technology to acquire fingerprints of two varieties of medicinal materials. Simultaneously, we also obtained their fingerprints through HPLC. Two fingerprint recognition technologies were compared for their effectiveness. The findings demonstrate that the signals obtained through electrochemical fingerprinting have a higher recognition rate.

Corn silage is extensively utilized in ruminant feeding on a global scale, with substantial research efforts directed towards enhancing its nutritional worth and managing moisture content. The purpose of this study was to assess the impact of normal cutting height and elevated cutting height on whole-crop corn silage. Corn was harvested at heights of 15 cm and 45 cm above the ground, respectively, 45 days after heading. The harvested corn was cut into 2-3 cm lengths and packed into 20-liter plastic silos in triplicate. The results showed that dry matter (DM), crude protein (CP), water soluble carbohydrates (WSC), and in vitro dry matter digestibility (IVDMD) of C45 were significantly higher than those of the control, while the neutral detergent fiber (NDF) was significantly lower in C45 (p<0.05). The C15 had higher yields than C45 (p<0.05). There was no significant difference in the total digestible nutrients (TDN) yield of whole-crop corn silage. The increase in cutting height resulted in a larger change in moisture content and NDF per centimeter. After 60 days-ensiling, C45 showed significantly lower NH3-N concentrations. Moreover, C45 had significantly higher lactic acid concentration, lactic acid/acetic acid ratio, and lactic acid bacteria count compared to the control. Mold was not detected and the yeast count was less than 2 log10 cfu/g fresh matter in both control and C45. In summary, C45 improved the feeding value and fermentation quality of whole-crop corn silage at the expense of forage productivity.

Decabromodiphenyl ether (BDE209) is a persistent aromatic compound widely associated with environmental pollutants. Given its persistence and possible bioaccumulation, exploring a feasible technique to eradicate BDE209 efficiently is critical for today’s environmentally sustainable societies. Herein, an advanced nanocomposite is elaborately constructed, in which a large number of titanium dioxide ( TiO2) nanoparticles are anchored uniformly on two-dimensional graphene oxide (GO) nanosheets ( TiO2/GO) via a modified Hummer’s method and subsequent solvothermal treatment to achieve efficient photocatalytic degradation BDE209. The obtained TiO2/ GO photocatalyst has excellent photocatalytic due to the intense coupling between conductive GO nanosheets and TiO2 nanoparticles. Under the optimal photocatalytic degradation test conditions, the degradation efficiency of BDE209 is more than 90%. In addition, this study also provides an efficient route for designing highly active catalytic materials.

With the popularity of live streaming commerce, the characteristics of streamers and products subtly influence consumer behavior through visual live streaming form. Based on dual-process theory, this paper develops a comprehensive theoretical model to examine how consumer perceived streamer characteristics and product characteristics influence streamer attractiveness and product attractiveness, and explore how consumer behavior inertia is affected by streamer attractiveness and product attractiveness. An online survey consisting of 300 participants was recruited to empirically examine the proposed research model. The results indicated that consumer perceived streamer characteristics and product characteristics are important factors affecting the streamer attractiveness and product attractiveness, which in turn positively affect consumer’s shopping experience memory, which further influence consumer behavior inertia. In addition, the moderating effects of mindfulness are also examined.

An all-perovskite oxide heterostructure composed of SrSnO3/Nb-doped SrTiO3 was fabricated using the pulsed laser deposition method. In-plane and out-of-plane structural characterization of the fabricated films were analyzed by x-ray diffraction with θ-2θ scans and φ scans. X-ray photoelectron spectroscopy measurement was performed to check the film’s composition. The electrical transport characteristic of the heterostructure was determined by applying a pulsed dc bias across the interface. Unusual transport properties of the interface between the SrSnO3 and Nb-doped SrTiO3 were investigated at temperatures from 100 to 300 K. A diodelike rectifying behavior was observed in the temperature-dependent current-voltage (IV) measurements. The forward current showed the typical IV characteristics of p-n junctions or Schottky diodes, and were perfectly fitted using the thermionic emission model. Two regions with different transport mechanism were detected, and the boundary curve was expressed by ln I = -1.28V - 13. Under reverse bias, however, the temperature- dependent IV curves revealed an unusual increase in the reverse-bias current with decreasing temperature, indicating tunneling effects at the interface. The Poole-Frenkel emission was used to explain this electrical transport mechanism under the reverse voltages.

This experiment was conducted to confirm the possibility of preparing Sorghum×sudangrass hybrid artificial hay using far-infrared rays in Korea. The machine used in this experiment is a drying device based on far-infrared rays, and is designed to control temperature, air flow rate, far-infrared radiation amount, and air flow speed. The Sorghum×sudangrass hybrids harvested in late September were wilted in the field for one day, and a drying test was performed on them. Conditions for drying were performed by selecting a total of 7 conditions, and each condition induced a change in radiation amount in a single condition (42%) and two steps (4 treatments) and three steps (2 treatments). The speed of the air flow in the device was fixed at 60 m/s, and the run time was changed to 30, 60, and 90 minutes. The average dry matter (DM) content was 82.84%. The DM content was 59.94 and 76.91%, respectively, in drying conditions 1 and 3, which were not suitable for hay. In terms of drying rate, it was significantly higher than 80% in the 5, 6 and 7 treatment, and power consumption was slightly high with an average of 5.7 kw/h. As for the feed value according to each drying condition, the crude protein (CP) content increased as the drying time increased, and there was no significant difference between treatments in ADF, NDF, IVDMD and TDN content. In terms of RFV, treatment 1, which is a single condition, was significantly lower than the complex condition. Through the above results, it was determined that the drying conditions 4 and 5 were the most advantageous when considering the drying speed, power consumption, and quality.

Graphite felt is a felt-like porous material made of high-temperature carbonized polymers. It is widely used in electrode materials because of its good temperature resistance, corrosion resistance, large surface area and excellent electrical conductivity. In this paper, the surface functional group modification is of graphite felt electrodes (mainly nitrogen doping modification, nitrogen–sulfur or nitrogen–boron co-doping modification) and surface catalytic modification (metal/ion surface modification and metal oxide surface modification as Main). There are two main methods and research progresses to improve the performance of graphite felt electrodes, and the comprehensive performance of surface functional group-modified graphite felt electrodes and surface catalytically modified graphite felt electrodes are compared respectively. The results show that both surface functional group modification and surface catalytic modification can improve the comprehensive performance of graphite felt electrodes. In this paper, the future development direction of graphite felt activation modification is also prospected.

본 시험은 우리나라에서 원적외선을 이용한 이탈리안 라이그 라스 인공건초 조제 가능성을 확인하기 위해 수행되었다. 본 시험 에 사용된 기계는 온도, 송풍량, 원적외선 방사량을 조절할 수 있 는 원적외선 건조기로 5월에 수확한 이탈리안 라이그라스를 대상 으로 실시하였다. 건조를 위한 조건은 전체 9개의 조건을 선택하 여 수행하였으며 각각의 조건은 방사율 42∼45 %로 설정을 하였 으며 내부 온도는 65℃로 설정하였다. 기기내의 기류의 속도는 40 ∼60m/s로 하였으며, 전체적인 건조시간은 방사량 42%는 30분, 43%는 25분 그리고 45%는 20분으로 하여 수행하였다. 각각의 건조조건에 따른 최종 건물함량은 평균 88.5%로 나타났으며 전 처리에서 건초에 적합한 건물함량을 나타내었다. 건조 조건에 따 른 전력 소비량을 보면 45% 방사량에서 20분간을 건조한 처리구 에서 가장 낮게 나타났다. 건조율에 있어서는 1∼5번 건조 조건에 서는 차이가 없었으나 6∼7조건에서는 유의적으로 낮은 경향을 보였다. 사료가치에 있어서는 대부분의 건조조건에서 원물보다 CP, IVDMD는 높았고 ADF, NDF 함량은 낮게 나타났으며 대체 적으로 4, 7 및 8번 건조 조건에서 높은 경향을 보였다. 이상의 결과를 통하여 건조속도, 전력량, 품질 등을 고려할 때 7 및 8번 건조조건이 가장 유리한 것으로 판단되었다.

This experiment was conducted to evaluate the growth characteristics and productivity of silage corn varieties developed in Korea. Corn cultivation was carried out using the experimental field in the Pyeongchang campus of Seoul National University (550 m above sea level). There have 10 domestic cultivars (Gwangpyeongok, Dacheongok, Yanganok, Jangdaok, Cheongdaok, Daanok, Sinhwangok, Sinhwangok Ⅱ, Pyeonggangok, and Hwangdaok) with one imported cultivar (P1543) which tested as a control, and randomized block design with three replications. Among the 100-grains weight of the seeds, Dacheongok was the heaviest, and the germination rate for each variety was 74.6% on average, while that of Daanok and Sinhwangok were over 90%. Sinhwangok was the fastest in tasseling and silking date. The number of days required to be silking date was as slow as 85 days in Dacheongok, Cheongdaok and Pyeonggangok, and as fast as 80 days or less in Sinhwangok, Sinhwangok Ⅱ and Hwangdaok. The plant height of P1543 was the highest as 344cm, and Hwangdaok and Daanok were short. In terms of the ratio of ears, Daanok had the highest rate of 60.18%, and Jangdaok and Dacheongok had the lowest. There was no significant difference in dry matter content in stover, but P1543 was generally higher in ear and total dry matter content. The dry matter yield was highest in P1543, and the yield of TDN was significantly higher in P1543 and Yanganok. There was a significant difference in the crude protein content of ears and the dry digestibility of stems (p<0.05), while there was no significant difference in the content of each part or element. Combining the above results, Yanganok was the highest in terms of yield, and Dacheongok, Sinhwangok and Pyeonggangok were also recommended for domestically grown corn varieties in the mountainous regions of Gangwon-do.

In view of the activated carbon pore-forming mechanism, the fractal hypothesis of pore interior growth was proposed by optimizing the structure of Sierpinski sponge. Based on the hypothesis and the definition of fractal dimension, the function relationship between the reaction degree, reaction step length, specific surface area and pore volume was deduced, and the pore fractal growth model of activated carbon activation process was established. Semi-coke, apple charcoal and lychee charcoal were used to prepare activated carbon. The pore size distributions of the activated carbons are in accordance with the fractal growth hypothesis. Further, the reaction degree and reaction step length can be determined by the experimental data of pore and surface structure, which verified the feasibility of the pore fractal growth model.

In this study, phase-pure titanium dioxide TiO2 ceramics are sintered using standard high-temperature solid-state reaction technique at different temperatures (1,000, 1,100, 1,200, 1,300, 1,400 oC). The effect of sintering temperature on the densification and impedance properties of TiO2 ceramics is investigated. The bulk density and average grain size increase with the increase of sintering temperature. Impedance spectroscopy analysis (complex impedance Z * and complex modulus M *), performed in a broad frequency range from 100 Hz to 10 MHz, indicates that the TiO2 ceramics are dielectrically heterogeneous, consisting of grains and grain boundaries. The complex impedance Z *-plane indicates the resistance of grains of the TiO2 ceramics increases with increasing sintering temperature, while that of grain boundaries develops in the opposing direction. The complex modulus M *-plane shows a grain capacitance that seems to be independent of the sintering temperature, while that of the grain boundaries decreases with increasing sintering temperature. These results suggest that different sintering temperatures have effects on the microstructure, leading to changes in the impedance properties of TiO2 ceramics.

To improve the pyrolytic carbon (PyC) deposition rate of Carbon/Carbon (C/C) composites prepared by the traditional chemical vapor infiltration (CVI) method, the 3D Ni/wood-carbon (3D Ni/C) catalyst was introduced into the CVI process. The effects of catalyst on the density of C/C composites were studied, and the deposition rate and morphologies of PyC were investigated after catalytic CVI. The morphologies of catalyst and PyC were characterized by scanning electron microscope and polarized light microscopy. The catalytic deposition mechanism of PyC was studied by density functional theory. The experimental results show that the initial carbon deposition efficiency of the catalytic pyrolysis process was 3–4 times that of the noncatalytic process. The catalyst reduced the energy barrier in the first step of deposition reaction from 382.55 to 171.67 kJ/mol according to simulation results. The pyrolysis reaction energy with Ni catalyst is reduced by 54% than that without the catalyst.

Well-crystallized vanadium pentoxide V2O5 thin films are fabricated on MgO single crystal substrates by using pulsed-laser deposition technique. The linear optical transmission spectra are measured and found to be in a wavelength range from 300 to 800 nm; the data are used to determine the linear refractive index of the V2O5 films. The value of linear refractive index decreases with increasing wavelength, and the relationship can be well explained by Wemple’s theory. The third-order nonlinear optical properties of the films are determined by a single beam z-scan method at a wavelength of 532 nm. The results show that the prepared V2O5 films exhibit a fast third-order nonlinear optical response with nonlinear absorption coefficient and nonlinear refractive index of 2.13 × 10−10 m/W and 2.07 × 10−15 cm2/kW, respectively. The real and imaginary parts of the nonlinear susceptibility are determined to be 3.03 × 10−11 esu and 1.12 × 10−11 esu, respectively. The enhancement of the nonlinear optical properties is discussed.

Bi2MoO6 (BMO) via the structure-directing role of CO(NH2)2 is successfully prepared via a facile solvothermal route. The structure, morphology, and photocatalytic performance of the nanoflake BMO are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), fluorescence spectrum analysis (PL), UV-vis spectroscopy (UVvis) and electrochemical test. SEM images show that the size of nanoflake BMO is about 50 ~ 200 nm. PL and electrochemical analysis show that the nanoflake BMO has a lower recombination rate of photogenerated carriers than particle BMO. The photocatalytic degradation of tetracycline hydrochloride (TC) by nanoflake BMO under visible light is investigated. The results show that the nanoflake BMO-3 has the highest degradation efficiency under visible light, and the degradation efficiency reached 75 % within 120 min, attributed to the unique hierarchical structure, efficient carrier separation and sufficient free radicals to generate active center synergies. The photocatalytic reaction mechanism of TC degradation on the nanoflake BMO is proposed.