검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 415

        181.
        2008.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        종균의 종류에 따라 중온성 품종의 생산성이 어떻게 달라지는지를 확인하고자 연구를 수행하였다. 버섯의 발생 경향은 세 처리구 모두 비슷했으며, 성형종균과 액체종균 처리구는 2차발생까지 총수확량의 50% 이상, 4차까지 80%이상 발생되었다. 기형버섯조사에서는, 세 처리구 모두 2차 발생까지만 기형버섯이 발생되었다. 하지만 기형버섯 발생률에 있어서는 다른 처리구들에 비해 액체종균 접종구에서의 발생률이 낮았다. 수확량조사에서는 액체종균을 접종했을 때 배지당 411 g으로 처리구들 중 가장 많았고 10 g이 넘는 버섯도 309 g으로 톱밥종균과 성형종균에 비해 많았다. 그리고 발생된 자실체 개수는 톱밥종균과 성형종균 간에 유의성이 있었지만 자실체 개당 무게는 세 처리구 간에 유의성이 없었다.
        3,000원
        182.
        2008.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        비틂시험에서 전단탄성계수와 감쇠비에 상응하는 변형률 산정의 복잡성은 여러 방법에 의하여 해결되어 왔다. 특히, 수정 등가반경법은 공진주/비틂전단 시험의 모든 변형률 영역에서 변형률에 따른 등가반경비 곡선을 보다 효과적으로 나타내는데 적합하다. 감쇠비 산정시 수정 등가반경법을 쌍곡선 모델, 수정 쌍곡선 모델, 램버그오스굿 모델등에 적용시켜 보았다. 연구결과는 감쇠비 산정시 재래식 등가반경법에 의한 하나의 등가반경 수치를 사용하는 것은 적절치 않다는 것을 보여주었다. 이력감쇠뿐 아니라 미소변형률 영역에서의 흙의 감쇠 현상을 고려하기 위하여 새로운 모델이 개발되었고, 이러한 두 가지 복합감쇠에 상응하는 변형률 산정시 부가적 조정이 필요한지 검토해 보았다.
        4,500원
        183.
        2007.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Timoshenko의 전통적인 보 이론에 근거한 유한 요소의 전단 잠김 현상을 해결하기 위하여 가정 변형도법을 적용한 7자유도 공간 박벽 뼈대요소를 개발하였다. 2개의 노드를 갖는 직선 보요소에서 한 요소내의 변형도가 일정하다고 가정하여 형상함수를 유도하고 이를 바탕으로 가상일의 원리에 따라 강성행렬을 구성하였다. Corotational 기하 비선형 해석법을 이용하여 불평형 하중을 산정하였으며 부재 길이의 비선형 효과를 반영하기 위하여 bowing effect를 정밀하게 고려하였다. 일축 비대칭 단면을 갖는 곡선 외팔보와 이축 비대칭 단면을 갖는 직선 외팔보에 대하여 횡-비틀림 좌굴에 의한 안정 해석과 후좌굴 해석을 수행한 결과 ABAQUS 쉘요소와 좋은 일치를 보여 주었다.
        4,300원
        184.
        2007.12 KCI 등재 구독 인증기관·개인회원 무료
        This study was carried out to obtain basic data on physiological characteristics for an artificial cultivation of Grifola frondosa. Ten strains of G. frondosa were collected from Korea, China and Japan and those were isolated and tested. PDA medium was selected for the favorable culture medium. The optimal conditions for the mycelial growth of G. frondosa were 25℃ and pH 4∼5 respectively. The carbon and nitrogen sources for the optimum mycelial growth were fructose and peptone, respectively. Highest mycelial growth was observed when the C/N ratio was 10∼20. Significant differences among lines were found for production yield and crop cycle time. KME44009 had a short spawn run time, high yield, good color and quality compare with other strains. To find out the suitable medium composition of G. frondosa, physicochemical conditions were investigated. The T2 formulation (55:25:8:12 mixing ratio of oak sawdust, oak chip, wheat bran and soybean cake) showed the shortest time to complete the crop cycle and the highest yields(weight of fresh mushrooms harvested at maturity). Among the physicochemical factors, pH, crude oil and total nitrogen may affect mushroom yield. Therefore, development of suitable medium would benefit from increased production efficiency of G. frondosa mushrooms and be commercial potential.
        187.
        2007.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        돌나물의 수확후 저장온도가 저장성에 미치는 영향을 분석하기 위하여 저장온도에 따른 생체중, 색상차, 엽록소 함량, 수분함량, 외관상 변화 등을 조사하였다. 생체중은 저장온도에 따라 8.7-25.3%의 감소를 보였으며, 저장온도가 높을수록 생체중 감소율도 높았다. 계통에 따른 생체중 감소는 포항지방종이 가장 컷으며, 완주 지방종의 변화가 비교적 적었다. 외관상 품질은 20℃에서 4일경, 10℃에서 6일경, 5℃에서 8일경부터 하위 잎에 변색이 나타나기 시작하였으며, 시간이 지남에 따라 서서히 부패하기 시작하였다 SPAD 값으로 비교한 엽록소 함량은 20℃와 10℃에서는 4일과 6일 후부터 급격한 감소를 보였으나, 5℃에서는 변화가 적었다. 잎의 색도 변화에서 명도를 나타내는 L값과 녹색-적색을 나타내는 a값은 저장온도가 높을수록 저장일 수에 따라 유의하게 증가하였다. 저장 후 10일째에 변색이나 부패한 돌나물의 비율은 저장온도가 높을수록 증가하였으며, 이는 수확시의 수분함량과 유의한 상관 관계를 보였다(P=0.01). 계통간에는 완주 지방종이 비교적 저장성이 높았으며, 군산, 완도, 포항 순으로 부패율이 높았다. 따라서 돌나물을 스치로폼 접시에 랩포장 할 경우, 5℃에서는 수확 후 8일까지 상품성을 유지한 상태로 저장이 가능하였다.
        4,000원
        188.
        2007.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        위상최적화기법을 이용하여 보의 기본고유진동수 최대화문제를 수행하였다. 도입된 위상최적화기법은 구조물의 모드형상에 의해서 발생되는 모드변형에너지를 바탕으로 한다. 최소화하고자하는 모드변형에너지를 목적함수로 하고 구조물의 초기부피를 제약함수로 채택하였다. 최적정기준법을 바탕으로 한 크기조절알고리듬을 유한요소내부에 존재하는 셀의 빈공간의 크기를 조절하기 위해 도입하였다. 세 가지의 다른 경계조건을 가지는 보를 이용하여 자유진동모드형상에 저항하는 보의 최적위상을 조사하였다. 수치해석결과로부터 도입된 위상최적화기법을 이용하여 도출한 보의 최적위상은 초기구조물에 비해 저차의 자유진동수가 크게 증가하는 것으로 나타났으며 특히 모드변형에너지를 이용하는 위상최적화의 경우에는 구조물의 기본진동수를 최대화하는데 매우 효과적인 것으로 나타났다.
        4,000원
        189.
        2007.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Entomopathogenic nematode, Steinernema carpocapsae GSN1 strain was evaluated for the environmentally sound control of Tebenna issikii (Lepidoptera: Choreutidae) in the laboratory. The corrected mortality of Tebenna issikii larvae was 100% at the 40 infective juveniles (Ijs)/larva 3 days after treatment with S. carpocapsae GSN1 strain in Petri dish. LC₅₀ value of S. carpocapsae GSN1 strain against Tebenna issikii was 5.7 Ijs. The mean penetration numbers of Ijs of S. carpocapsae GSN1 strain at the 5, 10, 20, 40 and 80 Ijs/larva in a Tebenna issikii larva were 1.4, 1.4, 3.2, 5.6 and 11.9 Ijs/larva, respectively. However penetration rate of Ijs of S. carpocapsae GSN1 strain at 5 Ijs/larva was the highest among other nematode concentrations. Progeny of S. carpocapsae GSN1 strain in a Tebenna issikii larva was higher with increasing nematode concentration.
        4,000원
        190.
        2007.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        맛버섯의 우량균주를 선발하고 병재배에 적합한 환경조건과 재배기술을 찾고자 시험한 결과는 다음과 같다. 맛버섯 균사는 MCM배지와 Hamada배지에서 잘 자랐고, 배지의 적정산도는 pH6~7이었다. 균사생육에 가장 적합한 온도는 25℃였으며, 15℃ 이하와 30℃ 이상의 조건에서는 균사생육이 현저하게 늦어졌다. 맛버섯 균주 29계통 중 생산성이 좋은 계통은 JNM19007, JNM19026, JNM19027과 JNM19028이었다. 자실체 생산을 위하여 가장 적합한 배지조성비는 미송톱밥 80%와 밀기울 20%(V/V) 혼합배지로 1,100cc 병당 평균 188g의 자실체가 생산되었다. 최적 후배양기간은 50일 이었으며, 균긁기 후 7일 만에 발이 되었다. 발이유기동안 적정 온도는 12℃이었고, 생육기에는 16℃였다. 맛버섯 전 재배기간 동안 적합한 상대습도는 95%였다.
        4,000원
        191.
        2007.06 구독 인증기관·개인회원 무료
        This study was carried out to obtain basic data on physiological characteristics for an artificial cultivation of Grifola frondosa. Ten strains of G. frondosa were collected from Korea, China and Japan and those were isolated and tested. PDA medium was selected for the favorable culture medium. The optimal conditions for the mycelial growth of G. frondosa were 25℃ and pH 4~5 respectively. The carbon and nitrogen sources for the optimum mycelial growth were fructose and peptone, respectively. Highest mycelial growth was observed when the C/N ratio was 10~20. Significant differences among lines were found for production yield and crop cycle time. KME44009 had a short spawn run time, high yield, good color and quality compare with other strains. To find out the suitable medium composition of G. frondosa, physicochemical conditions were investigated. The T2 formulation(55:25:8:12 mixing ratio of oak sawdust, oak chip, wheat bran and soybean cake) showed the shortest time to complete the crop cycle and the highest yields(weight of fresh mushrooms harvested at maturity). Among the physicochemical factors, pH, crude oil and total nitrogen may affect mushroom yield. Therefore, development of suitable medium would benefit from increased production efficiency of G. frondosa mushrooms and be commercial potential.
        192.
        2007.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        From the course of screening of useful enzyme producing microorganism from insect guts, we isolated 9 lipase producing strains and their lipase producing activities were tested. 16S rDNA sequence analysis showed that they were Gram negative bacteria grouped on Serratia sp., Pseudomonas sp., and Burkholderia sp.. Among them, an excellent lipase producing strain, Burkholderia sp. HY-10 identified by 16S rDNA analysis and biochemical methods, was further studied its lipase producing characteristics. It was isolated from a longcorm beetle, Prionus insularis and showed cell density dependent lipase producing activity in the culture media that contained olive oil as a carbon source. Maximum lipase production was achieved in the M9 media containing 0.5% yeast extract and 0.5% olive oil when cultured at 30℃ for 36-42 hrs.
        4,000원
        193.
        2007.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        느타리버섯류의 새로운 품목을 개발하기 위하여 고온기에 재배하기 알맞은 분홍느타리 품종 을 개발하였다. 단포자를 분리하고 균사접합 방법을 이용하여 분홍느타리 4개 계통에 의한 5개 교잡조합으로 125개의 교잡주를 육성하였다. 이중에서 2186 x 2104의 교잡주 25개중에서 3개의 백색 자실체 교잡주가 나타났다. 특성이 우수한 2172와 2104를 교잡하여 수량이 높고 색깔 등 품질이 우수한 Pss 2006-420호를 선발하여 새로운 품종 '노을'을 육성하였다. 주요 특성으로 균사배양 최적온도는 25℃∼30℃, 버섯발생 온도는 19∼24℃, 자실체 생육온도는 19∼24℃로 원기형성을 위하여 저온처리가 필요하지 않으며 여름철을 중심으로 늦봄부터 이른 가을까지 재배하기에 알맞은 품종이다. 자실체의 갓 색깔은 분홍색이며 자실체 형태는 다발형으로 기존에 보급되지 않은 새로운 종의 품종이다. 균사체 배양기간은 30-35일이며 균긁기 후 초발이소요일수는 3∼5일, 생육일수는 5∼10일로 온도가 높을수록 단축된다. 자실체 형태는 깔때기형이며 유효경수는 병당 47개, 대굵기는 11.3mm로 다른 느타리 종에 비해 가늘고, 개체중은 3.5g으로 갓이 얇고 수량은 병당 (850ml) 102.2±8.2g이다. 품질을 높게 하려면 재배온도를 19-22℃로 다소 낮은 생육온도에서 관리하는 것이 좋다. 재배 배지가 달라지거나 자실체가 너무 크게 생육하면 질겨지는 경향이 있고 담자포자의 비산량이 많은 편이다. 기존의 다른 느타리와는 달리 자실체 색깔이 분홍색으로 꽃과 같이 아주 아름답다. 특히 최근에 색깔이 다양한 웰빙식품이 각광을 받음에 따라 버섯의 칼러화가 요구되고 있다. 이러한 분홍느타리는 시각적 효과가 뚜렷하여 버섯요리 개발과 판촉행사 등에 유용하게 이용될 수 있을 것으로 기대되며, 궁극적으로는 새로운 버섯의 수요 창출로 농가 소득에 이바지 하게 될 것이다.
        4,000원
        194.
        2007.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        우수한 약리기능성을 보이는 잎새버섯의 병재배에 적합한 새로운 품종 "함박"을 이핵단핵 (di-mono) 교잡육종법으로 육성하였다. "함박" 잎새버섯의 재배는 참나무 톱밥 75% + 포플라톱밥 25%에 영양원으로는 미강 15% 또는 옥수수피 10%를 혼합사용할 때 가장 좋았으며, 병재배와 봉지재배가 모두 가능하다. 그러나 재배농가에서 현재 재배되는 버섯을 대체하기에는 배양기간이 길고, 재배시 습도관리가 까다로워 재배법을 더 개선할 필요가 있다. 무엇보다 시장을 형성하기 위해서는 잎새버섯의 약리 기능성에 관한 연구와 이를 바탕으로한 지속적인 홍보가 필요하다. 함박 잎새버섯의 특성은 다음과 같다. 균사배양 최적온도는 25℃, 자실체발생온도는 15∼16℃, 생육온도는 15∼18℃로 기존품종에 비하여 다소 낮은 중온성이다. 함박자실체의 색깔은 갈색이며 갓 이면에는 장타원형의 관공으로 되어 있다. 병재배시 초발이소요일수가 잎새1호보다 2일 빠르고 수량은 병당 97g으로 높으며, 자실체 송이의 크기가 크며 색택이 진하여 품질이 좋다.
        4,000원
        195.
        2006.09 구독 인증기관·개인회원 무료
        In order to investigate 95% retained critical current of Bi-2223/Ag tapes under various stress-strain conditions, load cell attached tension and bending apparatus was used. The critical current of stress-strained tape was degraded below 95% retained critical current when tension and bending was simultaneously applied together. But only one of this tension or bending did not degrade the tape below 95% retained critical current. Deformation temperature was important to maintain the 95% retained Ic of Bi-2223/Ag tapes after bending or tension deformation because mechanical strength of tapes can be changed drastically between room temperature and 77 K.
        196.
        2006.09 구독 인증기관·개인회원 무료
        Tensile stress-strain and dynamic acoustic resonance tests were performed on Fe-C-Ni-Cu-Mo high-strength steels, characterized by a heterogeneous matrix microstructure and the prevalence of open porosity. All materials display the first yielding phenomenon and, successively, a continuous yielding behavior. This flow behavior can be described by the Ludwigson equation and developes through three stages: the onset of localized plastic deformation at the pore edges; the evolution of plastic deformation at the pore necks (where the austenitic Ni-rich phase is predominant); the spreading of plastic deformation in the interior of the matrix. The analytical modeling of the strain hardening behavior made it possible to obtain the boundaries between the different deformation stages.
        197.
        2006.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Bacillus thuringiensis strains were isolated from the domestic soil and a strain was selected that had a new host range and high toxicity against agriculture insect pest. The 142 samples of soil were sampled from the mountains, paddy fields and patches, in Daejon, Chungnam, Chungbuk and Jeonbuk and used for the investigation. Sixteen B. t strains were isolated from 12 samples among collected samples. There were 11 strains that showed toxical activity on Plutella xylostella (Lepidoptera: Yponomeutidae), 7 strains on Spodoptera litura (Lepidoptera: Noctuidae), 5 strains on Arcte coerulea (Lepidoptera: Noctuidae), 5 strains on Culex pipiens pallens (Diptera: Culicidae) among the 16 isolated B. t strains. But there were not any strains that showed activity against Hyphanria cunea (Lepidoptera: Arctiidae) and Sitophilus oryzae (Coleoptera: Rhynchophoridae). And also some of B. thuringiensis strains showed insecticidal activity with 2, 3 or 4 kinds of insects. But there were also 3 strains that did not show any activities to the 6 insects which were used in the experiment. When examined with a phase-contrast microscope, the insecticidal crystal protein produced from 16 selected strains had 13 bipyramidal and 3 spherical shapes. The insecticidal bioactivity of the S. litura showed 100% mortality when there were 1.3×10⁷ (cfu/㎖) of CAB109 isolates.
        4,000원
        198.
        2006.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        구조물의 진동 자료를 이용하는 유전알고리즘(GA) 기반 손상검색기법에 있어, 사용되는 모드 특징의 선택은 손상검색 결과의 정확도를 높이는데 중요하다. 본 연구의 목적은 고유진동수와 모드변형에너지를 이용하여 손상검색의 정확도를 높이는 것이다. 이와 같은 연구 목적을 달성하기 위하여 다음과 같은 연구를 수행하였다. 먼저, 모드 변형에너지를 유도하고 고유진동수와 모드변형에너지를 이용하는 새로운 GA 기반 손상검색기법을 제안하였다. 다음으로 제안된 기법의 효율성을 검증하기 위하여 양단 자유보의 손상시나리오를 제시하고, 손상시나리오에 따른 진동모드 실험을 실시하였다. 마지막으로 실험 자료를 바탕으로 제안된 기법과 기존의 고유진동수와 모드형상을 이용하는 기법으로 손상검색을 실시하여 결과를 비교하였다.
        4,000원
        199.
        2006.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        A ligniolytic bacterial strain was isolated from the digestive tract of a red dragonfly, Sympetrum depressiusculum. It was identified as a Serratia marcescens HY-5 by 16S rDNA sequence analysis and physiological and biochemical analysis. The isolated strain showed proportional increase of ligninolytic activity to the cell growth in the culture media which include lignin compounds. It showed about 25-45% decomposition of lignin compound by 48 hr incubation especially, showed effective decomposition of monomer lignin compounds, vanillin and guaiacol, and a dimer, dealkaline lignin. PCR amplification of 16S rDNA followed by denaturing gradient gel electrophoresis analysis showed high density of S. marcescens HY-5 in the gut of the S. depressiusculum at both gut samples which collected at different site.
        4,000원