The background of this study is to establish a systematic development process for SSD(Solid State Drive) which is being watched as the next generation auxiliary memory device and to make stable production. In order to do so, we select the two products that have been developed and classify and analyze all defects generated in each product by type and process of defects. The root cause of the fault and its background were reflected in the contradiction matrix of TRIZ's technical contradiction, and the improvements suggested in the 40 inventive principles were reflected in the test case design methodology of each process. Finally, this study suggests a process optimization method for systematic development.

As a result of frequent occurrence of serious industrial accidents due to chemical substances, Korea Occupational Safety & Health Agency has been implementing the PSM system (process safety management) since 1996, and the target sites are required to submit process safety reports. In the semiconductor business, which is becoming smaller and more integrated as the technology advances, many of these hazardous chemicals are used. Most of the semiconductor sites are PSM target sites, and many devices are included in the PSM target equipment. This study optimizes the introduction and setup process of new equipments in the semiconductor workplace using harmful hazardous materials, and conducted an empirical study on the improvement of the safety risk, focusing on the S group semiconductor business, and applied the common standard of work under the PSM system This is an example of improving the risk of leakage of toxic gas components and waste of rework by arranging functions and risks in the space centering method

This paper deals with solution methods for discrete and multi-valued optimization problems. The objective function of the problem incorporates noise effects generated in case that fitness evaluation is accomplished by computer based experiments such as Monte Carlo simulation or discrete event simulation. Meta heuristics including Genetic Algorithm (GA) and Discrete Particle Swarm Optimization (DPSO) can be used to solve these simulation based multi-valued optimization problems. In applying these population based meta heuristics to simulation based optimization problem, samples size to estimate the expected fitness value of a solution and population (particle) size in a generation (step) should be carefully determined to obtain reliable solutions. Under realistic environment with restriction on available computation time, there exists trade-off between these values. In this paper, the effects of sample and population sizes are analyzed under well-known multi-modal and multi-dimensional test functions with randomly generated noise effects. From the experimental results, it is shown that the performance of DPSO is superior to that of GA. While appropriate determination of population sizes is more important than sample size in GA, appropriate determination of sample size is more important than particle size in DPSO. Especially in DPSO, the solution quality under increasing sample sizes with steps is inferior to constant or decreasing sample sizes with steps. Furthermore, the performance of DPSO is improved when OCBA (Optimal Computing Budget Allocation) is incorporated in selecting the best particle in each step. In applying OCBA in DPSO, smaller value of incremental sample size is preferred to obtain better solutions

The objective of this paper is to suggest structural design for the long-life housing apartment complex to save the construction cost. The key is to use unavailable underground space due to bearing walls or bad configuration of columns in apartments as the parking space. Therefore, the structural plan of apartment buildings considering the parking section in the underground should be designed. After analytical resutls of three cases, it is significant effect in saving construction cost.

This research focused on deciding optimal manufacturing WIP (Work-In-Process) limit for a small production system. Reducing WIP leads to stable capacity, better manufacturing flow and decrease inventory. WIP is the one of the important issue, since it can affect manufacturing area, like productivity and line efficiency and bottlenecks in manufacturing process. Several approaches implemented in this research. First, two strategies applied to decide WIP limit. One is roulette wheel selection and the other one is elite strategy. Second, for each strategy, JIT (Just In Time), CONWIP (Constant WIP), Gated Max WIP System and CWIPL (Critical WIP Loops) system applied to find a best material flow mechanism. Therefore, pull control system is preferred to control production line efficiently. In the production line, the WIP limit has been decided based on mathematical models or expert’s decision. However, due to the complexity of the process or increase of the variables, it is difficult to obtain optimal WIP limit. To obtain an optimal WIP limit, GA applied in each material control system. When evaluating the performance of the result, fitness function is used by reflecting WIP parameter. Elite strategy showed better performance than roulette wheel selection when evaluating fitness value. Elite strategy reach to the optimal WIP limit faster than roulette wheel selection and generation time is short. For this reason, this study proposes a fast and reliable method for determining the WIP level by applying genetic algorithm to pull system based production process. This research showed that this method could be applied to a more complex production system.

다양한 이미지 샘플의 Eye test를 바탕으로 기술적인 화질 지표 조절을 통하여 감성 화질을 최적화 시키는 방법이 소개된다. 여러 가지 이미지 콘텐츠의 다양한 이미지에 대하여, 콘트라스트, 명도, 채도 화질 지표 톤 커브를 사용하여 평가가 수행 되었다. 이미지 화질 향상에 기여하는 우선순위는 명암, 채도 및 밝기 순으로 분석 되었다. 이미지 감성 화질 측정치의 기술적인 화질 지표 변화에 따른 기울기의 공통점을 살펴본 결과, 거의 0, 중간 그리고 최대 기울기의 영역으로 구성된 함수 형태로 모델링을 할 경우, 기존의 역 U 형태의 성질 뿐 아니라 log 또는 포화 형태의 감성 화질 변화까지 분석 가능함을 알 수 있었다. 단일 및 복수의 화질 지표의 경우에 대하여도 화질 개선 방안이 모색 되었으며, 기존 및 본 논문에서 분석된 결과를 위한 새로운 함수가 소개 되었다. 복수의 통합적 이미지 화질 지표를 통하여 향상 시킬 경우 오직 몇몇 한정된 지표 제어의 경우에만 실현 가능하다는 것을 알 수 있었다. 또한, 화질 향상 방법은 영상 콘텐츠에 따라 크게 차이가 없음을 알 수 있었다.

As a preparation of a design standard regarding road facilities in terms of reliability based optimum design examples, such as cantilever columns for traffic lights, optimum design in deterministic and probabilistic ways for the foundation of traffic lights poles are proposed. Most of the previous study have focused on the foundation surrounded by cohesionless soil. However, the design would be governed by risky condition. Therefore the resistance by clay-soil is investigated compared with other design specifications. In deterministic optimization, GRG method is applied. It is found that both geometries of deep and shallow foundation provides optimum values. The resistance of cohesive soil is selected to represent the ultimate limit states, in terms of sliding, overturning and bearing pressures from super structures to the foundation under external loads. Example foundations with varying height of columns for traffic lights are optimized about 30% decreased embedded depth of foundation. The optimum coefficients of resistant and load factors may need to be developed with design load combinations in order to prepare design specifications as the next step.

This study was carried out to extract ginsenosides in by-products from honeyed red ginseng. Response surface methodology (RSM) was used to optimize the extraction conditions. Based on D-optimal design, independent variables were ethanol (extraction solvent) concentration (30-90%, v/v), extraction temperature (25-70oC), and extraction time (5-11 h). Extraction yield (Y1) and total ginsenosides (Y2) in the extract were analyzed as dependent variables. Results found that extraction yield increased with increasing extraction temperature and time, whereas it was decreased with increasing ethanol concentration. Similar trends were found for the content of ginsenosides in the extracts, except for ethanol concentration, which was increased with increasing ethanol concentration. Regression equations derived from RSM were suggested to coincide well with the results from the experiments. The optimal extraction conditions for extraction yield and total ginsenosides were an extraction temperature of 56.94oC, ethanol concentration of 57.90%, and extraction time of 11 h. Under these conditions, extraction yield and total ginsenoside contents were predicted to be 84.52% and 9.54 mg/g, respectively.

This study investigates the analysis algorithm for developing an optimum hull form with minimum wave resistance by using the practical application of one minus prismatic. In this algorithm the potential-based panel method was adopted to get the wave resistance coefficient as the objective function and SQP method was applied as an optimizer to get the optimum hull form. As an target ship, the series 60(CB=0.6) was taken into account and LBP(length between perpendiculars) of the ship was changed in the direction including a central parallel portion. To verity the validity of this study, the results of the numerical analyses were compared with experimental data.

This study was conducted to optimize the conditions of a sweet rice paste as a replacement of red bean paste recipe using the central composite design of response surface methodology (RSM). Ten experimental recipes with two reference points (rice flour and sugar), were selected, and the physical and sensory characteristics of a sweet rice paste were measured. In the Rapid Visco Analyzer test, breakdown value was the highest in rice flour (105.73 RVU). Sweetness significantly increased with addition of sugar contents (p<0.0002) and viscosity increased with addition of rice flour contents (p<0.0185). Moisture contents decreased with increasing contents of rice flour and sugar, whereas yellowness and redness tend to increase. In the sensory evaluation test, quadratic models for color (p<0.01865), sweetness (p<0.0399), thickness (p<0.0073), and overall acceptability (p<0.0249) were approved as independent for the rice flour and sugar contents. In conclusion, the optimal mixing ratio of sweet rice paste was determined to be 45.38 g of rice flour and 77.95 g of sugar.

본 논문에서는 반응표면법과 다목적최적화 기법을 이용한 유한요소모델개선기법의 절차를 제안하고 이를 저층의 철근콘 크리트건물의 모델개선에 적용하였다. 대상건물은 전단벽 신설 및 댐퍼부착을 위한 부재의 강재보강을 통해 내진보강이 이 루어진 건물로서 보강전후에 소형 가진기를 이용한 진동실험을 실시하여 동특성을 구하였다. 대상건물의 개선에 사용된 변 수는 기존콘크리트, 신규타설된 콘크리트, 조적의 탄성계수, 신축줄눈부의 스프링계수, 강재보강된 부재의 유효강성비이다. 보강전후 건물의 초기모델을 구축한 후 중심합성법에 따라 개선변수의 값을 변화시키면서 얻은 해석결과를 통해 고유진동 수의 오차와 모드형상의 오차를 나타내는 2개의 반응함수를 구하고, 이를 다목적최적화의 목적함수로 사용하였다

The study for reducing friction in elevation motion of a large television stand using over 50 inches is performed in this paper. The first study attempted to reduce the frictional force the gas seal lip technology. The second study is for optimized piston structure development by comparison pipe orifice and labyrinth orifice. As the result of the first study, in the gas seal lip technology, the outer-inner diameter of Ø20 × Ø8 in the test result of hollow rod is revealed more proper if the weight of 50 inch television assumed as 30. As the result of the second study, the optimized piston structure development through experiment is fixed orifice specification as labyrinth orifice because pipe orifice is founded slip up/down phenomenon of the Ø0.4~1.0 orifice and the labyrinth orifice is not founded that of the Ø0.4~0.6 orifice both tests on 300 mm intervals.

An injection unit is the important part which guide the melted resine into the mold. Once injection molding is performed, there will be a pressure of 33 MPa built up inside of injection cylinder body. It was confirmed that the crack occurs by internal stress on the 9 mm material when the machine is used for long time. Because the cylinder rod has material thickness of 9~12 mm during manufacturing process on the cylinder body, there would be 3 mm thickness differences. In this experiment, IDEAS, a computer aided structure analysis software, is used to present the optimized design condition. Insert rod with inner diameter of 9 mm was set as a normal and vary 3 mm in x, y axis direction. When the internal pressure of 33 MPa occurs at the injection unit, fix the x and y direction and find out the stress acting only in z axis. It was confirmed that the stress of 45~82 N/mm 2 was built up when the left of cylinder body had been set 9 mm by using a structure analysis. Also, it has been verified the thickness of the material on the left need to be greater and equal than 12 mm to prevent a material crack by an internal stress.

Numerical analysis using k-ε model of unsteady state was performed to decide the optimal shape of power auxiliary apparatus in automotive engine. In order to obtain auxiliary electric power using coolant in automotive engine, shapes of 3 Types were compared. Furthermore to achieve the confidence of numerical analysis, the results of numerical analysis was compared with those of experiment. As the results, it showed that accuracy of numerical analysis was about 85~98%. Further the optimal shape, in this study, was Type-1, which had outer rounding R32.5, among 3 Types.

Coagulation/precipitation process has been widely used for the removal of phosphate within domestic wastewater. Although Fe and Al are typical coagulants used for phosphate removal, these have some shortages such as color problem and low sedimentation velocity. In this study, both Fe and Al were used to overcome the shortages caused by using single one, and anionic polymer coagulant was additionally used to enhance sedimentation velocity of the precipitate formed. Batch experiments using a jar test were conducted with real wastewater, which was an effluent of the second sedimentation tank in domestic wastewater treatment plant. Response Surface Methodology was used to examine the responsibility of each parameter on phosphate removal as well as to optimize the dosage of the three coagulants. Economic analysis was also done on the basis of selling prices of the coagulants in the field. Phosphate removal efficiency of Fe(III) was 30% higher than those of Fe(II). Considering chemical price, optimum dosage for achieving residual phosphate concentration below 0.2 mg/L were determined to be 18.14 mg/L of Fe(III), 2.60 mg/L of Al, and 1.64 mg/L of polymer coagulant.

A membrane module including grid was designed and introduced to MBR (membrane bio-reactor) for the purpose of better control of membrane fouling. It could be anticipated that the grid enhances the shear force of fluid-air mixture into the membrane surface by even-distributing the fluid-air to the membrane module. As MLSS concentration, packing density which is expressed in the ratio of the housing and the cross-sectional area of membrane fibers (Am/At) and air-flow rate were changed, membrane foulings were checked by monitoring fouling resistances. The total fouling resistance (Rc+Rf) without grid installation (i.e., control) was 2.13×1012 m-1 , whereas it was reduced to 1.69×1012 m-1 after the grid was installed. Regardless of the grid installation, the Rc+Rf increased as the packing density increased from 0.09 to 0.28, however, the increment of resistance for the grid installation was less than that of the control. Increase in the air flow rate did not always guarantee the reduction of fouling resistance, indicating that the higher air flow rate can partially de-flocculate the activated sludge flocs, which led to severer membrane fouling. Consequently, installation of grids inside the housing have brought a beneficial effect on membrane fouling and optimum air flow rate is important to keep the membrane lowering fouling.

Stress on plates may increase in the neighborhood the edges or the holes for rivets or bolts. Excessive stress concentration may lead to severe breakage of the plates. Thus, it is important to conduct optimization of arrangement of holes at the design stage. In this paper, accuracy of FEM analysis was examined for such stress concentration . By changing the hole size on a narrow plate, change of the stress concentration factor(K) was investigated. Additionally, the same experiment was conducted about series of multiple holes on plate to investigate interaction between the adjacent holes. Then, the FEM results were compared to the reference predictions respectively. Finally, a method by which simple stress concentrating situations can be optimized, will be suggested. This method was examined by FEM, and showed similar tendency with the expectation. Therefore, this method can be valuable when arranging the holes on a plate.

The objective of this study was to optimize analytical methods for ochratoxin A (OTA) and zearalenone (ZEA) in rice straw silage and winter forage crops using ultra-high performance liquid chromatography (UHPLC). Samples free of mycotoxins were spiked with 50 μg/kg, 250 μg/kg, or 500 μg/kg of OTA and 300 μg/kg, 1500 μg/kg, or 3000 μg/kg of ZEA. OTA and ZEA were extracted by acetonitrile and cleaned-up using an immunoaffinity column. They were then subjected to analysis with UHPLC equipped with a fluorescence detector. The correlation coefficients of calibration curves showed high linearity (R2 ≧ 0.9999 for OTA and R2≧0.9995 for ZEA). The limit of detection and quantification were 0.1 μg/kg and 0.3 μg/kg, respectively, for OTA and 5 μg/kg and 16.7 μg/kg, respectively, for ZEA. The recovery and relative standard deviation (RSD) of OTA were as follows: rice straw = 84.23~95.33%, 2.59~4.77%; Italian ryegrass = 79.02~95%, 0.86~5.83%; barley = 74.93~97%, 0.85~9.19%; rye = 77.99~ 96.67%, 0.33~6.26%. The recovery and RSD of ZEA were: rice straw = 109.6~114.22%, 0.67~7.15%; Italian ryegrass = 98.01~109.44%, 1.65~4.81%; barley = 98~113.53%, 0.25~5.85%; rye = 90.44~108.56%, 2.5~4.66%. They both satisfied the standards of European Commission criteria (EC 401-2006) for quantitative analysis. These results showed that the optimized methods could be used for mycotoxin analysis of forages.

본 연구에서는 대기 중 용액공정으로 유기발광다이오드(OLED)를 구현하였으며, 발광재료로서 고분자와 저분자 가 혼합된 하이브리드 host 물질과 저분자 dopant를 사용하였고, 고분자 소재의 홀이동층과 저분자 소재의 전자이동층 을 사용하였다. 모든 유기층들을 대기 중에서 용액공정으로 스핀코팅 되었으며, 용액공정 기반 OLED의 효율 향상을 위 해서 발광층의 두께 및 열처리 공정의 최적화 조건에 대해서 살펴보았다.

목 적 : 최근 관상동맥 경화반(coronary plaque)을 진단하기 위해 X-ray를 이용한 관상동맥 조영술(coronary angiography), fractional flow wire를 통한 관상동맥 혈류측정 (fractional flow reserve, FFR),혈관내초음파(intravascular ultrasound. IVUS), 심혈관 광간섭 단층촬영(optical coherence tomography, OCT) 등 여러 가지 기법들이 사용되고 있다. 이 중 관상동맥 경화반(coronary plaque) 을 평가할 수 있는 PC-VENC를 이용한 MR- FFR(fractional flow reserve)이 개발되어 기존의 비침습적 영상기법인 관상동맥 CT와 OCT, FFR등 침습적 영상기법과 비교하여 연구가 진행되고 있다. 이에 본 연구는 관상동맥 경화반(coronary plaque)을 평가하는 MR-FFR 검사에서 사용되는 2D PC-VENC 기법의 최적화 요인에 대하여 알아보고자 한다. 대상 및 방법 : 2015년 8월부터 2016년 1월까지 관상동맥의 근위부에 의미 있는 동맥경화반이 관찰되어 침습적 관상동맥 조영술과 OCT 또는 FFR측정이 예정된 환자 30명을 대상으로 MR-FFR 검사를 진행하였다. 3.0T MR(Trio, Siemens Healthcare, Erlangen, Germany) 장비를 사용하였다. 코일은 phased-array body coil을 사용하였고 parameter는 fat saturation을 사용하고 in-plane resolution은 0.5-0.6 × 0.5-0.6 mm², slice thickness 는 3.2 mm, VENC 범위는 동맥 경화반 상태에 따라 40-80 cm/s(3방향 z, x, y), cardiac phases는 2 (segments/phase), scan time은 slice당 4-8min/slice으로 설정하였다. 결 과 : Stenosis 정도 40%이하는 4명(13%), 40~70% 에서는 25명(77%), 70%이상은 3명(10%)으로 검사하였다. 40%이하에서의 VENC측정값은 normal 구간에서 40cm/sec, plaque 구간에서는 41±2.5cm/sec로 나타났고, 40~70%에서의 VENC측정값은 normal에서 40cm/sec, plaque구간에서는 46±4.6cm/sec로 70%이상에서의 VENC 측정값은 normal, plaque구간 모두 45cm/sec로 나타났다. VENC측정값 별 평균 검사시간은 35~40cm/sec에서 91.2분, VENC 40~45cm/sec에서 98.4분, VENC 45~50cm/sec에서 98.4분, VENC 50cm/sec 이상에서 107분이 소요되었다. 결 론 : 관상동맥 경화반 진단을 위한 2D PC-VENC 기법 사용 시, 본 연구에서 측정된 stenosis 정도에 따라 적정 VENC측정값을 사용하여 장시간의 검사시간 낭비를 최소화 할 수 있다. 또한 미리 알고 있는 stenosis정보를 통해 guide가 될 수 있는 VENC값을 사용함으로써 검사시간의 효율화를 구현할 수 있다.