An experimental study was conducted to examine for the structural behavior of coupled steel plate shear wall (Coupled SPSW) system what is formed by connection the two steel plate shear walls (SPSW) with a coupling beam. The variable of this study was the length of coupling beam. The testing results were showed that the strength and stiffness of specimen with shorter coupling beam were improved than those of other specimen. However there is no difference of the yielding mechanism.

우리나라 해안지역에는 많은 섬들이 위치하고 있어 대규모 지진해일이 발생하였을 때 섬과 지진해일의 상호작용으로 예기치 않은 지진해일 피해가 우려된다. 2011년 발생한 동일본 지진해일의 경우 제주도를 비롯한 남해안 섬들에 영향을 미쳤다. 본 연구에서는 천수이론에 근거한 수치모형을 이용하여 섬 중앙에 대하여 비대칭으로 입사하는 고립파의 처오름높이에 관하여 연구한다. 연구에서 얻은 결과는 지진해일의 급습에 대비한 방재대책을 수립하는데 사용될 수 있을 것이다.

According to social needs, eco-friendly material for concrete structures has been developed in recent years. Hwang-toh is one of the eco-friendly architectural material and hwang-toh has been used by partial or complete replacement of portland cement. Four beam specimens with the variations of types of FRP bar (GFRP or CFRP bar) and cement are prepared and tested. From development test, the performance of FRP rebar for PVA fiber reinforced AHC was evaluated.

Phase change material (PCM) has been developed and applied in various fields as construction material. If the application of PCM as the semi-rigid pavement cement grout becomes available, it would be possible to control the occurrence of a micro crack due to the generation of hydration heat in the ultra rapid harding cement, and if the occurrence of a micro crack is reduced, it would be possible to improve the cohesion performance between asphalt matrix and grout as well as to compact the matrix of the pavement material, improving the durability. Therefore, the applicability review of PCM for the purpose of improving the semi-rigid pavement materials through the shrink reduction of ultra rapid harding cement used as the semi-rigid pavement cement grout was carried out in this study.

This paper presents the flexural test results of steel fiber reinforced concrete (SFRC) prisms with different lengths of steel fibers. The specified compressive strength of SFRC is 40 MPa. Two types of steel fiber used in this study have lengths (0.5 and 0.9mm). Test results indicated that steel fibers with longer length is more effective to improve the flexural performance of concrete prisms than steel fibers with shorter length.

This study is for the damage with lack of drain pipe length and it is presented for the improved references which is ｢Design and management guidelines of road drainage facilities｣.

The condition assessment of the road tunnel is based on the judgment of the responsible engineer about the expansion joint. The evaluation result is divided into the span unit or the sheet unit when calculating the evaluation result. Therefore, it was divided into span units and sheet units and the actual difference was compared.

This study was made to examine the motion characteristics according to the reinforcement of the reinforcement length and stiffener reinforcement for shear reinforcement to the foundation structure reinforced with shear reinforcement steel plate. Experimental study was made after specimen was installed on the ground as the same as in the practical site. Reinforcement lengths of the steel for shear reinforcement are divided into 1,000 mm, 1,200 mm and 1,400 mm in the specimen and as for reinforcement method of the stiffener, 4 stiffeners with interval of 100mm reinforced with the same materials as the shear reinforcement were manufactured for the experiment. Considering result of the experiment, it is expressed that no effect of the stiffener reinforcement was found and regarding the reinforcement length of shear reinforcement material the crossed point of the two converted lines of the value that the shear force is expressed in the bearing power in the expanded dangerous section and the value that the shear capacity receivable by the reinforcement materials in the dangerous section is proposed as effective reinforcement length.

Phase change material (PCM) has been developed and applied in various fields as construction material. If the application of PCM as the semi-rigid pavement cement grout becomes available, it would be possible to control the occurrence of a micro crack due to the generation of hydration heat in the ultra rapid harding cement, and if the occurrence of a micro crack is reduced, it would be possible to improve the cohesion performance between asphalt matrix and grout as well as to compact the matrix of the pavement material, improving the durability. Therefore, the applicability review of PCM for the purpose of improving the semi-rigid pavement materials through the shrink reduction of ultra rapid harding cement used as the semi-rigid pavement cement grout was carried out in this

This paper presents the flexural test results of steel fiber reinforced concrete (SFRC) prisms with different lengths of steel fibers. The specified compressive strength of SFRC is 40 MPa. Two types of steel fiber used in this study have lengths (0.5 and 0.9mm). Test results indicated that steel fibers with longer length is more effective to improve the flexural performance of concrete prisms than steel fibers with shorter length.

This study is for the damage with lack of drain pipe length and it is presented for the improved references which is ｢Design and management guidelines of road drainage facilities｣.

Change in the adhesion strength between AR-glass textile and concrete was performed through pull-out test with longitudinal (load direction) and transverse development length. In case of longitudinal development length, adhesion performance was not shown. But in case of transverse, adhesion performance was increased according to the increasing transverse textile length.

When estimate Short Lenth External Tendon's tension by Vibration Measurement Method, We Consider Tendon's Boundary. This paper is a case about estimation of short lenth tendon's tension by using practical formula estimation and stiff string with clamped-clamped boundary conditions.

In a pretensioned concrete member, the effective prestress is not fully developed in a certain length from the end of the member, which is defined as transfer length. Because of its complex mechanism, previous transfer length models are mostly empirical and provide very different results. In this study, the Adaptive Neuro-Fuzzy Inference System(ANFIS) was introduced to estimate the transfer lengths of pretensioned concrete members. A total of 209 experimental data has been used to train ANFIS, and the trained ANFIS algorithm estimated the transfer lengths of test specimens very accurately.

Background : Platycodon grandiflorum radix used as a therapeutic agent for lung and respiratory diseases in traditional Korean medicine. The saponin and sugar content in P. grandiflorum root is dependent on the drying temperature and method. In this study, we investigated saponins and antioxidant contents in dried P. grandiflorum roots either not cut or cut to different lengths. Methods and Results : P. grandiflorum roots were either cut to 0.5, 1.0 or 2.0 ㎝ in length or left uncut. They were dried at 45℃ and the effect of antioxidant substances, antioxidant ability, and saponin content were investigated. P. grandiflorum roots rapidly dried out when cut to short lengths. The saponin contents (platycodin D, polygalacin D, and deapioplatycodin D) was highest in the uncut P. grandiflorum roots. When the cut lengths were long, the levels of polyphenolic compound increased. However, 2,2'-azinobis- 3-ethylbenzo-thiazoline-6-sulfonic acid (ABTS) and 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activities were higher in the samples cut to shorter lengths. Conclusions : These results suggested that the saponin and antioxidant content of P. grandiflorum roots could be maximized by controlling the drying rate of the roots via adjustments to the root cutting length.

Recently, many researches have been conducted to use FBG seonsors in order to measure the effective prestress force in a PSC girder. FBG sensors can be useful to investigate transfer length in prestressed concrete members since they do not have any effect on the bond mechanism between a tendon and concrete. In this research, an experimental program has been conducted to measure transfer length of tendons in high strength concrete members by using FBG sensors. The test results showed that FBG sensors gave a transfer length similar to that measured by concrete surface gauges, but they gave more stable results. This research can be useful for relevant areas such as investigation on the bond mechanism of a tendon in high strength concrete members.

This study is to investigate the waterproofing effects on the splice length of the waterproofed sheet. A Total of 10 specimens were produced and tested in order to investigate the waterproofing effects for reinforced concrete members. Test variables are the lengths of splice, the attachment method of waterproofed sheet and existence of mesh. The splices’ length set as 5%, 6.6%, and 10% of waterproofed sheet’s width. Two ways of Epoxy adhesion and hot-melt were used. Also, the mesh put to enhance the adhesion capacity between waterproofed sheets. The results of the experimental test, the specimens which composed with splice length over 6.6% of waterproofed sheet, epoxy adhesion constructed and with/without mesh did not showed water leakage. Whereas, the specimen of splice length under 5% and epoxy applied showed water leakage. In addition, the specimen with mesh (BE-S1-M1) proved less water leakage than the one without mesh (BE-S1-M0).

This paper is to evaluate the flexural characteristics of 180MPa Ultra High Performance Concrete and reinforcing steel. In this study, the bending test is performed to evaluate the flexural characteristics considering lap-splice length. The stability of the lap-splice length proposed the structural design codes are evaluated on load-displacement. The results confirmed that the ductility has increased when the lap-splice has increased.

본 연구는 고강도 철근을 확대머리 이형철근으로 사용하는 경우 정착길이 효과에 관한 실험 연구이다. 현행 기준에서는 확대머리 이형철근의 정착길이를 산정하는 식에서 철근의 설계기준강도를 400 MPa로 한정하고 있다. 고강도 철근에 대한 연구결과가 충분하지 않기 때문에 이러한 규정이 명시된 것이다. 따라서 본 연구에서는 설계기준 항목강도 600 MPa의 철근으로 확대머리 이형철근을 제작하여, 변수별 실험연구를 수행하였다. 실험은 철근의 정착길이, 철근의 개수, 그리고 확대머리의 형상 등의 변수로 계획하였다. 실험체는 정착길이가 긴 L형과 정착길이가 짧은 S형으로 분류하고, 확대머리의 형상은 원판형(A형)과 원뿔형(B형)으로 구분하였다. L형 실험체는 원판형 확대머리를 대상으로 철근 개수가 1∼3으로 변하는 3개의 실험체와 S형 실험체는 원판과 원뿔형 확대머리 형상에 대하여 정착길이를 L형의 50%, 45%, 40%, 35%로 변화한 실험체를 계획하였다. L형(LA형) 3개, SA형 4개, SB형 4개 등 총 11개의 실험체를 인발실험을 하였다. 실험결과는 콘크리트구조기준(부록 II)의 정착길이 산정 규정에 따라 평가하였으며, 그 결과 항복강도 600 MPa의 철근을 사용한 확대머리 이형철근은 현행기준의 설계식을 적용하여 설계할 수 있음을 보였다.

하천주변의도시화와이상기후등으로인해기존의하천위주의홍수방어는한계를보이고있으며, 이에따라유역통합적인홍수방어대 책의 하나로 강변저류지 설치에 대한 요구가 증대되고 있다. 강변저류지를 치수대책에 포함시키기 위해서는 정량적인 홍수조절효과 산정이 필요하며, 이를 위해서는 강변저류지 홍수조절효과에 영향을 미치는 인자들의 불확실성을 줄이기 위한 노력이 필요하다. 특히 하천 수위 예측의 중요 변수인 하천 조도계수는 항상 불확실성을 포함하고 있으므로, 이를 고려한 설계방법이 필요하다. 따라서 본 연구에서는상대적으로설계자가자유롭게결정할수있는설계인자인강변저류지의횡월류부길이를이용하여하천조도계수의불확실성 을 고려한 강변저류지 설계 기법을 제안하고자 한다. 이를 위해 HEC-RAS 부정류 수치모형을 이용하여 하천 조도계수와 횡월류부 길이 변화가 홍수조절효과에 미치는 영향을 검토하였고, 분석결과를 이용하여 하천의 수위 예측 불확실성을 고려한 횡월류부 길이를 결정하는 기법을 제시하였다. 본 연구에서 제시한 횡월류부 길이 결정 기법은 하천 수위 예측의 불확실성을 해결할 수 있기 때문에 강변저류지의 홍수조절효과를 좀 더 안전측으로 제시하는데 도움이 될 것으로 기대한다.