The fatty acid composition and free amino acid content of domestic soybean cultivars were analyzed to confirm the quality characteristics of protein and fat contained in soybeans. The saturated fatty acid content of soybeans included palmitic acid at 9.47~11.15%, followed by stearic acid and myristic acid. The total saturated fatty acid content in soybeans was 12.56~14.34%, with Taekwang having the lowest content, followed by Daewon, Seonyu, Cheonga, and Jinpung. The linoleic acid content, an unsaturated fatty acid, was 45.69~58.17%, with Taekwang showing the lowest composition and Jinpung showing the highest composition. Next was oleic acid at 14.69~33.86%. Jinpung had the highest linoleic acid composition, had the lowest and Taekwang which had the least linoleic acid, had the highest. The unsaturated fatty acid content was in the order of linolenic acid, eicosatrienoic acid, eicosadienoic acid, and eicosapentaenoic acid. The total free amino acid content was 217.28~456.66 mg%, with Daewon showing the highest free amino acid content, followed by Seonyu, Taekwang, Cheonga, and Jinpung. The free amino acid content varied depending on the cultivars, but in general, the free amino acids in the soybeans used in the experiment showed higher aspartic acid, glutamic acid, and proline contents than other amino acids.

Lac 색소의 열수와 메탄올 추출물의 일부 유리아미노산과 그 유도체의 조성 및 함량, phenolic acid와 flavonoid의 조성 및 함량을 분석하고, 일부 피부미용 화장품 생리활성을 조사한 결과는 다음과 같다. 유리아미노산은 열수와 메탄올 추출물에서 각각 검출되지 않았으며, 단백질 비구성 아미노산 유도체는 열수 추출물에서 2종, 메탄올 추출물에서는 3종이 검출되었다. Phenolic acid와 flavonoids의 조성 및 함량분석에서, phenolic acid의 경우 열수 추출물에서 2종, 메탄올 추출물에서 5종이 검출되었다. 또한 flavonoids의 경우 열수 추출물에서는 검출되지 않았으나, 메탄올 추출물에서는 rutin과 taxifolin이 약간 존재하는 것으로 나타났다. DPPH radical 소거 활성은 메탄올 추출물이 40.43 ± 0.21%로 열수 추출물에서보다 약간 높게 나타났고, Tyrosinase 저해 활성은 메탄올 추출물이 열수 추출물에서 보다 약 2배 정도 높은 것으로 나타났다. HaCaT 세포주에 대한 세포독성은 모든 처리 농도에서 나타나지 않았으며, 처리 농도가 증가함에 따라 세포 생장이 증가하는 경향이었다.

본 연구결과 glucose, NH3, AST, ALT는 4℃일 때 가장 높게 나타났으며, glucose와AST는 4℃일 때 다른 염분구보다 26 psu에서 유의하게 높았다. 참전복에는 총 18가지 FAA가 존재하였으며, taurine, arginine, glutamic acid, alanine, glycine, lysine이 전체의 90% 가량을 차지하는 우점 FAA 로 나타났다. Taurine은 30 psu 이상에서는 수온 간 유의한 차이가 없었으나, 26 psu에서는 6, 8℃일 때 유의하게 증가하였다. Glycine은 수온이 낮아질수록 유의하게 감소하여 6℃일 때 가 장 높게 나타났다. 따라서 참전복은 30~34 psu, 8~10℃에서의 조건으로 수송 시 스트레스를 최소화할 수 있을 것으로 여겨진다.

Yellow phosphor dispersed color conversion glasses are promising phosphor materials for white LED applications because of their good thermal durability, chemical stability, and anti-ultraviolet property. Six color conversion glasses were prepared with high Tg and low Tg specimens of glass. Luminous efficacy, luminance, CIE (Commission Internationale de l'Eclairage) chromaticity, CCT (Correlated Color Temperature), and CRI (Color Rendering Index) of the color conversion glasses were analyzed according to the PL spectrum. Color conversion glasses with high Tg glass frit, sintered at higher temperature, showed better luminous properties than did color conversion glasses with low Tg glass frit. The characteristics of the color conversion glass depended on the glass composition rather than on the sintering temperature. The XRD peaks of the YAG phosphor disappeared in the color conversion glass with major components of B2O3-ZnO-SiO2-CaO and, in the XRD results, new crystalline peaks of BaSi2O5 appeared in the color conversion glass with major components of Bi2O3-ZnO-B2O3-MgO. The characteristics of CIE chromaticity, CCT, and the CRI of low Tg color conversion glasses showed worse color properties than those of high Tg color conversion glasses. However, these color characteristics of low Tg glasses were improved by thickness variation. So color conversion glasses with good characteristics of both luminous and color properties were attained.

For the purpose of improving the durability problem, translucent opal glass was fabricated as a substitute for the polycarbonate diffuser of LED lighting. Calcium phosphate was used as an opacifier of opal glass and melted in an electric furnace. The opaque effect was identified according to the change of the cooling procedure. As results, translucent opal glass was obtained by the melting of a batch with a composition of 3.8% calcium phosphate at 1550˚C for 2 hrs and then the cooling of the material in the furnace. For the cooling condition of the glass sample, HTCG (High Temperature Cooled Glass) was found to have better optical properties than LTAG (Low Temperature Annealed Glass). It had excellent optical properties for a diffuser of LED lighting, with no dazzling from direct light due to its high haze value of over 99% and low parallel transmittance value of under 1%. For the thermal properties, it had an expressed thermal expansion coefficient of 5.7×10-6/˚C and a softening point of 876˚C; it also had good thermal properties such as good thermal shock resistance and was easy to apply to the general manufacturing process in the forming of glass tubes and bulbs. Therefore, it is concluded that this translucent opal glass can be used as a glass diffuser material for LED lighting with high heat resistance and high durability; this material is suitable as a substitute for polycarbonate diffusers.

원전에서 발생되는 방사성폐기물에 대한 고화처리 방법 중 하나인 유리화기술이 일부 가연성폐기물에 대해 적용되고 있다. 국내외적으로 중저준위 방사성폐기물의 효과적인 감용과 안정적인 처분을 위해 다양한 폐기물에 대한 유리화기술 적용방안이 확대 연구되고 있으며, 최근에는 가연성폐기물 뿐만 아니라 알루미늄 금속과 같은 비가연성폐기물에도 유리화 연구가 활발하게 진행되고 있다. 공기조화계통 (HVAC)에는 주로 필터가 이용되고 있으며, 사용 후 필터는 여과재 (유리섬유 및 알루미늄)를 이용하여 배기체를 흡착하기 때문에 방사성폐기물로 처리가 되어야 한다. 본 연구는 필터에 대한 처리기술 연구를 위해 유도가열식 저온용융로 (Cold Crucible Induction Melter: CCIM)를 이용한 유리화 타당성 연구를 수행하였다. 사용후 필터에 대한 유리화 (Vitrification)는 먼저 유리섬유 및 알루미늄 함량을 고려한 최적의 유리조성을 개발 하였으며, 개발된 유리조성을 이용하여 최적의 폐기물 저감을 위한 용융변수와 최종 생성된 유리고화체의 특성을 분석하였다. 사용후 필터 유리화용 조성유리는 주로 SiO2와 B2O3로 구성되어 있다. 전기로를 이용한 용융물 특성시험에서는 폐기물 투입률 및 최종 생성물인 유리고화체의 특성이 검토되었다. 본 연구에서는 알루미늄 금속과 유리섬유로 구성된 필터에 대한 유리조성 개발과 이를 통해 생성된 유리고화체의 물리화학적 특성을 검토하고 유리화 타당성을 확인하였다.

In this study, the additivity factors of compositions to density and glass transition point (Tg) in a xLi2O-(1-x)[(1-y)TeO2-yZnO] (0<x<20, 0<y<20) glass system were analyzed by using mixture design, and the change of ionic conductivity with density and Tg was discussed. As a method for predicting the relation between glass structure and ionic conductivity, density was measured by the Archimedes method. The glass transition point was analyzed to predict the relation between ionic conductivity and the bonding energy between alkali ions and non-bridge oxygen (NBO). The relation equations showing the additivity factor of each composition to the two properties are as follows: Density(g/cm3) = 2.441x1 ＋ 5.559x2 ＋ 4.863x3 Tg(˚C) = 319x1 ＋ 247x2 ＋ 609x3 － 1950x1x3 (x1 : fraction of Li2O, x2 : fraction of TeO2, x3 : fraction of ZnO) The density decreased as Li2O content increased. This was attributed to change of the TeO2 structure. From this structural result, the electric conductivity of the glass samples was predicted following the ionic conduction mechanism. Finally, it is expected that electric conductivity will increase as the activation energy for ion movement decreases.

Pretreatment of eliminating FFA is needed to make biodiesel from animal fat recovered from leather wastes because its acid value is high. This study was carried out to investigate the influence of 4 different pretreatment methods, which are heterogeneous catalyst method, ion exchange resin method, low pressure.high temperature method, and alkali method on the eliminating FFA and fatty acid composition. The results showed that the rate of eliminating FFA increased in the order of alkali method > catalyst method > low pressure high temperature method > ion exchange method. In the case of pretreatment of alkali method using NaOH, the rate of eliminating FFA appeared more than 86% regardless of acid value. Therefore, it was considered that alkali method using NaOH was the most effective in the view of economical and productive aspects, taking it into account that the acid value of animal fat recovered from fleshing scrap generated during leather making processes was 7 to 8.

본 실험은 백두산 자생 참돌꽃의 발아조건과 종자, 유식물 및 뿌리유래 캘러스의 유리 아미노산 조성과 함량을 조사하여 다음과 같은 결과를 얻었다. 뿌리로부터 캘러스 유도는 2,4-D 및 NAA가 첨가된 MS배지에서 유도되었다. 캘러스 형성율은 2,4-D 2.0 mg L-1에 kinetin 1.0 mg L-1 혼용 처리구가 NAA 2.0 mg L-1에 kinetin 1.0 mg L-1 혼용 처리구보다 캘러스 형성율이 높았

The compositions of total and free amino acids in parts of Omija were investigated. The most abundant amino acids in fruits, endocarps, and seeds were arginine (50.80%), lysine (14.37%), glutamic acid (14.22%), respectively. Since the amino acid scores of fruits, endocarps, and seeds were 9.4, 11.9, and 16.7, respectively, the limiting amino acid of each part were S-compound amino acids. In the composition of free amino acids, contents of lysine were highest one such as 51.78, 57.00 and 32.88% in fruits, endocarps and seeds, respectively. The contents of histidine from free amino acids were 23.62% in fruits, 22.37% in endocarps, and 26.41% in seeds.

This study was carried out to investigate the compositions of free sugars, lipids, and nonvolatile organic acids in parts of omija. The major components of free sugars in each part of omija were fructose and glucose. The contents of those were similar in fruits and endocarps, however, the content of glucose was 1.5 times as much as that of fructose in seeds. The content of lipids in endocarps was 2.4 times as much as that in seeds, and major composition of lipids was neutral lipid. In the contents of nonvolatile organic acids, the content of citric acid that content was 61 to 68% depend on each part of sample was highest among other components, and that of malic acid being 25 to 30% was followed. The contents of nonvolatile organic acids of water extract were 74.5, 55.9, and 69.2% as high as those of original sample in fruits, endocarps, and seeds, respectively. The content of oxalic acid in seeds was lower than that of it in original sample.