우리는 콘크리트 세상 속에 살고 있다고 해도 과언이 아니다. 콘크리트 도로를 달리고 콘크리트 건 물 속에서 살고 있다. 그런데 최근 노후화된 구조물의 붕괴 사례들이 지속적으로 발생하고 있으며 이 에 대한 원인 규명과 재발 방지, 그리고 기술적 사전 예측 등이 필요하다. 특히 우리나라의 경우 4계 절의 영향을 받는 철근콘크리트 구조물은 시간이 흐름에 따라 다양한 열화로 인해 강도가 저하되고, 이로 인해 건축물의 심각한 손상 및 붕괴가 발생하게 된다. 전국적으로 기온이 영하로 내려가는 겨울 철에는 동결융해의 영향으로 인한 강도 저하로 노후화가 진행되며, 콘크리트의 공기율에 따라 동결융 해로 인한 노후화 정도가 달라지게 된다. 이는 콘크리트 공기율에 따라 내구성지수가 변화하여 동결융 해의 영향 정도가 변화하기 때문이다. 그러나 기존의 콘크리트에 관한 동결융해 영향 연구는 재료에 대한 연구가 많지만, 상대적으로 큰 철근콘크리트 부재 단위에 대한 연구는 부족하다. 따라서 본 연구 에서는 철근콘크리트 부재를 대상으로 기중 동결융해 시험 방법을 통해 콘크리트의 공기율이 증가함 에 따른 재료 단위의 영향과 철근콘크리트 부재의 휨 거동 특성에 대한 영향을 분석하고자 한다.본 연 구에서는 동결융해를 입은 콘크리트가 공기율이 증가함에 따라 동탄성계수와 내구성지수를 비교하고, 이에 따른 압축강도 실험을 통해 동결융해의 영향을 평가하였으며 철근콘크리트 부재의 휨 실험을 통 해 동결융해가 콘크리트 공기율에 대하여 거동 특성, 탄성 강성 및 항복까지의 에너지 흡수 능력에 미 치는 영향을 비교하여 분석하였다. 또한 ABAQUS 해석 프로그램을 사용하여 유한요소 모델을 제안하 고 휨 거동 성능을 실험값과 비교하여 분석하였다.

In order to determine the future direction of Busan City’s tree planting policy in accordance with changes in automobile fuel and air pollutants, this study selected representative tree species planted in Busan and identified the biogenic volatile organic compounds (BVOCs) emission rate and characteristics of each species. First, representative tree species were selected for each street tree species, forest tree species, and park tree species, and the emission rate and major components of BVOCs were investigated for each tree species. Furthermore, by comparing the ozone generation potential (POCP) for each tree species, tree species with a low emission rate were selected. According to the POCP comparison, P. yedoensis, G. biloba, Z. serrata and C. retusus were selected as roadside tree species, P. densiflora and C. obtusa as forest species, and A. palmatum, C. japonica, and Q. myrsinaefolia were deemed suitable for park species. However, in the case of P. occidentalis, Quercus, and M. glyptostroboides, the emission rates of BVOCs were found to be high. Despite this, these tree species were found to display excellent CO2 absorption and carbon storage. The concentration of NOx in the city center is likely to decrease due to the current trend of transitioning to eco-friendly cars worldwide, resulting in less cars that rely on fossil fuels. Therefore, in the current climate where NOx emissions are still high, planting tree species with a low BVOCs emission rate would be an optimal approach. On the other hand, if the NOx concentration in the city is found to be very low due to changes in automobile fuel use, planting tree species with excellent BVOCs emission capacity and CO2 absorption would be ideal.

The purpose of this study was to propose an operational concept for a ship in a fleet equipped with an interceptor missile system, a naval surface to air defense system, and to develop a simulation program that reflects it. The results of the defense activities of other ships in the fleet can be reflected by receiving information about the status of the enemy missiles. The allocation of defensive assets is based on the survival probability of the ship, not on the destruction of enemy attacks, which can be obtained as the product of the expected survival probability for each enemy missile. In addition, the concept of predicted survivability was introduced to assess the loss of future defense opportunities that would result from assigning a new command. A simulation program was also developed as a tool for realizing the proposed concept of operations, which generated cases.

At Pyropia farms, organic acid treatments have enhanced productivity and quality by removing pest algae (such as Ulva spp. and diatoms) and reducing the occurrence of diseases. Ulva spp. attaches to the Pyropia nets competing for inorganic nutrients & space and diminishing productivity. Additionally, the presence of attached contaminants (such as diatoms and middy particles) on the Pyropia nets negatively affects the quality of Pyropia. This study investigated the effects of removing Ulva linza and washing the Pyropia yezoensis nets using an activating treatment agent (organic acid and highly saline solution) with an air bubble device. The results of measuring the dead cell ratios after treatment under different conditions showed that the dead cell ratio of U. linza did not significantly increase when the air bubble device combined the activating treatment agent with the activating treatment agent alone. When washing the P. yezoensis nets, the air bubble device was about 19-37% more effective than the activating treatment agent alone. The findings of this study suggest that the air bubble device enhances the efficacy of the activating treatment agent, resulting in the effective cleaning of the Pyropia nets.

This study was carried out to verify the effect of increasing the ambient temperature around apple trees by directly blowing warm-air under the slender spindle apple training system using an agricultural warm-air blower and ducts used in plastic house cultivation to develop late frost damage reduction technology during the blooming season. The temperature increase effect around apple trees owing to the operating warm-air blowing ducts was most evident at a height of 30 cm from the ground surface. At this height, the branch ducts made of Oxford fabric and Solartex showed a raised ambient temperature of about 2.6oC and 1.1oC, respectively. However, the temperature rising effect at a height of 130 cm and 230 cm from the ground surface owing to the operating warm-air blowing ducts was not distinct compared to that in the control. The effect of raising ambient temperature around apple trees through the operation of warm-air blowing ducts was found to be greater as the ambient temperature did not severely drop below the freezing temperature. Damage to the central flower in the apple inflorescence at the pink stage was significantly reduced in the warm-air blowing ducts made of Oxford fabric (42.8%) compared to that in the control (73.2%). However, the damage to other flowers except the central one was not significant compared to that in the control. The fruiting rate of the central and other flowers in the apple inflorescence depending on the operating warm-air blowing ducts was significantly increased compared to that in the control. The fruiting rates of central and other flowers depending on the ducts materials, such as Oxford fabric, and Solartex, and that of the control were 38.3%/82.7%, 31.4%/82.7%, and 0.5%/61.1%, respectively. In conclusion, in the case of open-field apple orchards, if the warm-air blowing duct is installed close to the laterals where frost damage mainly occurs in the slender- spindle dense cultivation system, the damage caused by late frost in the vicinity of blooming time can be reduced to some extent.

Marketing research in hospitality and tourism has been rising continuously. This study provides a systematic review on marketing research and air transport. It identifies key themes and tracks the changes in scholarly researchers’ perspectives pre and post pandemic. By approaching this review not only from the tourism and air transport perspectives, but also from the marketing perspective, this allows the transfer of theories between disciplines, an added value that provides the basis for a field of research to expand and further evolve. Finally, a conceptual framework and an agenda for future research based on emerging research topics are provided.

The following results were obtained by conducting a flow experiment. The experiment with air volume showed that the ducts with 3 shapes in the same cross-sectional area were large in the order of circular duct, square duct, and flexible duct. As a result of measuring the pressure value by duct shape to determine the cause of the difference between the flow rate and the air volume value by duct, the negative pressure was large in the order of circular duct, square duct, and flexible duct. in the countercurrent test, In the case of circular ducts, the deviation was high, In the case of Flexible ducts, the mild increase in the countercurrent is judged to be the difference in pressure and friction received by shape.

This study aims to investigate the effect of drying temperatures on the quality characteristics and physicochemical properties of vegetables. Lettuce and napa cabbage were dried at 40, 50, and 60oC and analyzed for various quality indexes. Higher drying temperature induced the lower L* and higher a* and b* values of samples. Also, it resulted in lowering the rehydration ratio, pH, and total free amino acid content of dried vegetables. The outcome might be due to the damage to the internal structure of vegetables and the decomposition of free amino acids during thermal treatment. Higher drying temperatures led to higher soluble solid and total polyphenol contents due to the conversion of phenolic compounds from combined to free form during the drying process, which changed phenolic compounds from combined to free form. Consequently, samples dried at higher temperatures had higher DPPH radical scavenging ability. The final moisture content and drying time decreased as the drying temperature increased; moreover, the antioxidant activity increased. A lower drying temperature is beneficial to maintaining the chemical characteristics of crops.

This study measured the suspended fungal concentration in indoor multiple facilities nationwide. The regions were selected as representative cities by region: Seoul, Gyeonggi (Incheon), Gangwon, Gwangju, Daejeon, and Busan. A total of 2028 regional comparisons, including department stores, schools, public toilets, libraries, and banks, subway, sports facilities and comparative analysis were conducted for each multi-use facility industry. Among the nationwide, Among the regions, the average concentration of floating mold in indoor multi-use facilities was the lowest in Busan at 394.67 CFU/m3, followed by Gyeonggi and Incheon 487.90 CFU/m3, Seoul 542.84 CFU/m3, Daejeon 809.30 CFU/m3, Gangwon 1,145.22 CFU/m3, Gwangju was 1,371.10 CFU/m3 in the order. Busan was the lowest, and Gangwon was the highest. The reason that Busan, which has a high average temperature and population density, shows a lower mold concentration than Gangwon, is that floating mold in the indoor air is not affected by the external atmospheric environment, population density, and number of facility users. Although it cannot be said that there is no influence of the atmospheric environment, it was found that the indoor environment has different characteristics from the outdoor environment. The importance of air quality management has been confirmed, and further, it is necessary to subdivide the management standards by region and multi-use facilities, and the management standards need to be converted to maintenance rather than recommendations.

In this study, the cooling performance change according to the arrangement of the fin-tube heat exchanger using a single tube and the cooling performance change according to the air flow rate were studied. The arrangement of basic heat exchanger was set to 4 columns and 4 rows, and the performance change was studied while changing the columns and rows. In addition, the performance change was investigated by changing the air flow rate of the basic heat exchanger.

Recently, the Defense Advanced Research Projects Agency(DARPA) in the United States is studying a new concept of war called Mosaic Warfare, and MUM-T(Manned-Unmanned Teaming) through the division of missions between expensive manned and inexpensive unmanned aircraft is at the center. This study began with the aim of deriving the priority of autonomous functions according to the role of unmanned aerial vehicles in the present and present collaboration that is emerging along with the concept of mosaic warfare. The autonomous function of unmanned aerial vehicles between the presence and absence collaboration may vary in priority depending on the tactical operation of unmanned aerial vehicles, such as air-to-air, air-to-ground, and surveillance and reconnaissance. In this paper, ACE (Air Combat Evaluation), Skyborg, and Longshot, which are recently studied by DARPA, derive the priority of autonomous functions according to air-to-air collaboration, and use AHP analysis. The results of this study are meaningful in that it is possible to recognize the priorities of autonomous functions necessary for unmanned aircraft in order to develop unmanned aerial vehicles according to the priority of autonomous functions and to construct a roadmap for technology implementation. Furthermore, it is believed that the mass production and utilization of unmanned air vehicles will increase if one unmanned air vehicle platform with only essential functions necessary for air-to-air, air-to-air, and surveillance is developed and autonomous functions are expanded in the form of modules according to the tactical operation concept.

최근 도심항공모빌리티(UAM) 상용화에 앞서 도심 내 항공 교통수단 관련 산업에 대한 연구개발 중요성이 급격히 증가하고 있다. 도심항공모빌리티(UAM) 환경을 조성하기 위해서 핵심 항공 이동 수단 비행체인 개인용 항공기 (PAV) 기체에 관한 연구가 수행되고 있으나, 탑승자 관점의 연구가 상대적으로 부족한 상황이다. 특히 PAV는 탑승 자의 새로운 생활공간으로 활용될 것으로 예상되기 때문에 탑승자의 실내행위를 지원하는 실내공간 설계를 위해서 는 PAV 기체에서 발생하는 물리적 요소가 인체에 미치는 영향에 관한 연구가 필수적으로 이루어져야 한다. 이에 본 연구의 목적은 PAV의 공중 운항 특성으로 인해 인체에 영향을 주는 제약 요소를 도출하고, 이러한 제약 요소가 실내행위를 수행하는 탑승자 인체에 미치는 영향을 파악하는 것이다. 본 연구 결과, 항공 이동 수단 비행 기체 PAV 는 4,000ft 이하에서 운항해야 하는 기준에 따라, 운항고도에 따른 제약 요소는 소음, 진동, 저주파 운동에 의한 멀미 로 나타났다. 이러한 제약 요소가 실내행위에 영향을 미친다는 관점에서 PAV에서 행할 수 있는 실내행위를 자율주 행 자동차, 비행기, PAV 컨셉 사례를 활용하여 도출하고 인체에 미치는 영향과 수준을 고려하여 실내행위 지원을 위한 제약 요소 권장기준을 설정하였다. 또한 실내행위 지원을 위한 제약 요소의 인체 영향 수준을 감소시키기 위해 서는 시트의 형태 및 내장기능(진동 저감 기능, 온도조절, LED조명 등), 개인 좌석별 지향성 스피커를 활용한 외부소 음 감소, 소음과 진동 감소를 위한 내장재 등을 실내공간 설계에 반영해야 함을 제시하였다. 본 연구는 PAV 실내행 위에 영향을 주는 제약 요소를 도출하였고, 인체에 미치는 영향 수준을 확인하였으며, 추후 PAV 실내 설계 시 기초 자료로써 활용할 수 있다는 점에서 의미가 있다.

High concentrations of fine particles are increasingly being detected due to inflows from abroad and local emission sources in Korea. As most people spend about 90% of their time indoors, the use of indoor air cleaners has grown significantly as they are now thought to be essential items. In this study, the noise, power consumption, and clean air delivery rate (CADR) of commercial air cleaners were analyzed according to the structural shape of the air cleaners. Analyses were performed based on the experimental results of 249 cases for air cleaners certified by Korea Air Cleaning Association. The air cleaners with front inlet and upper outlet air flow direction, which currently account for the highest market share, were found to have the highest noise per CADR (dB(A)/(m3/min)). On the other hand, the air cleaners with the inlet and outlet air flow in the same horizontal direction were found to have lowest noise per CADR than other structures.

In general, small and medium-sized computer rooms do not have access floors for reasons of increased floor height and increased construction cost. Therefore, the air conditioning method used here applies the method of directly blowing the cold air of the air conditioner into the computer room. In this case, the hot/cold air is not separated, and as the hot air is recirculated, it is re-introduced to the front of the server rack, resulting in a problem that the server cooling efficiency is decreased. In addition, in such a computer room structure, it is difficult to configure and install a containment system. In this study, we tried to understand the problem of the formation airflow in the case of using the existing air conditioning method, and to find a method of configuring the air conditioning environment to improve the cooling efficiency. The purpose of this study was to understand the airflow/temperature distribution in the computer room using the CFD simulation method. In addition, the thermal characteristics of various air-conditioning environments such as the location of the CRAC cold air discharge location, the layout between server rack and CRAC and the containment were reviewed.

본 연구는 저장 온도를 달리하여 높은 상대습도의 환경에서 건조 감자를 저장하였을 때 발생하는 품질변화를 관찰하였다. 저장기간 및 건조온도가 증가함에 따라 L* value 는 감소하였고, a* 및 b* value는 증가하는 경향을 나타내었다. 수분활성도는 높은 습도 조건으로 인해 10일차부터 급격히 증가하였으며, 환원형 비타민 C 함량은 급격히 감소하는 경향을 나타내었다. pH 값은 저장기간 동안 완만하게 감소하였으며 40oC에서 저장했을 때 큰 폭으로 감소하였다. 저장기간 동안 대장균군은 검출되지 않았으며, 일반 세균 수는 저장 온도가 증가함에 따라 많이 검출되었다. 전체적으로 20oC와 30oC에서 저장한 시료 간의 차이는 크지 않았으나, 40oC에서 저장한 시료의 경우 큰 품질변화를 나타내었고, 밀봉된 상태로 저장한 대조구의 경우 품질변화가 적게 나타나는 것을 확인할 수 있었다. 따라서 본 연구결과를 종합해 볼 때, 밀봉하여 산소와 수분을 차단한 상태로 저장하는 것이 제품 고유의 특성을 유지하는데 가장 효과적이며, 높은 습도의 환경일 경우 낮은 온도로 저장하는 것이 품질 변화를 지연시키는데 도움이 될 것으로 판단된다.

Manned-unmanned teaming can be a very promising air-to-air combat tactic since it can maximize the advantage of combining human insight with the robustness of the machine. The rapid advances in artificial intelligence and autonomous control technology will speed up the development of manned-unmanned teaming air-to-air combat system. In this paper, we introduce a manned-unmanned teaming air-to-air combat tactic which is composed of a manned aircraft and an UAV. In this tactic, a manned aircraft equipped with radar is functioning both as a sensor to detect the hostile aircraft and as a controller to direct the UAV to engage the hostile aircraft. The UAV equipped with missiles is functioning as an actor to engage the hostile aircraft. We also developed a combat scenario of executing this tactic where the manned-unmanned teaming is engaging a hostile aircraft. The hostile aircraft is equipped with both missiles and radar. To demonstrate the efficiency of the tactic, we run the simulation of the scenario of the tactic. Using the simulation, we found the optimal formation and maneuver for the manned-unmanned teaming where the manned-unmanned teaming can survive while the hostile aircraft is shot-downed. The result of this study can provide an insight to how manned aircraft can collaborate with UAV to carry out air-to-air combat missions.

This study was conducted to help manage total floating bacteria and fungi in the indoor air by studying the characteristics of total floating bacteria and fungi according to the indoor CO2 concentration of daycare centers. The sampling and analysis of samples was based on the indoor air quality process test method, and the result analysis was conducted using the SPSS statistical program to perform correlation and regression analysis. Correlation and regression results show that CO2 and total airborne bacteria showed positive relationships, but airborne mold did not show relevance. In addition, in order to identify factors affecting airborne mold, correlation analysis and regression analysis were performed regarding total airborne bacteria, PM10, PM2.5, HCHO, outdoor mold, I/O ratio, indoor temperature/ humidity, area per classroom and volume. The results showed that the factors affecting airborne mold were I/O ratio, outdoor airborne mold, and total airborne bacteria. Research results show that CO2 and total airborne bacteria can be reduced and controlled by natural ventilation, and in the case of airborne mold, mechanical forced ventilation such as hoods will be necessary due to the introduction of outdoor airborne mold. In addition, it is necessary to consider I/O ratio criteria in order to confirm effective indoor mold contamination, taking into account the effect of outdoor mold inflow.