검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 25

        1.
        2024.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        철근은 콘크리트와 결합하여 인장 능력을 보완하고 표면 피막으로 부식을 방지하지만, 탄산화 및 염화물 침투로 인해 부식이 발생하면 내력이 저하된다. 이를 해결하기 위해 내부식성이 뛰어난 GFRP(Glass Fiber Reinforced Polymer) 보강근이 철근 대채제로 주 목받고 있다. 본 연구는 직경에 따른 GFRP 보강근의 부착특성을 철근과 실험적으로 비교 분석하였다. 콘크리트는 약 39MPa의 고강도 에 가까운 콘크리트를 사용하였으며, 보강근의 직경은 D10과 D13을 사용하였다. 실험 결과, GFRP 보강근의 평균 부착 응력은 17.21MPa로 철근의 18.14MPa와 유사하게 나타났다. GFRP 보강근의 슬립 양은 3.05mm로 철근의 1.53mm 보다 크게 나타났다. 또한 GFRP의 경우 인발 과정에서 표면에 국부손상이 발생하는 것을 확인하였다.
        4,000원
        2.
        2022.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 실내실험 및 수치해석을 적용하여 GFRP 보강근의 콘크리트 휨 및 인발 부착성능을 분석하였다. 부착길이 변화에 대하여 철근 또는 GFRP로 보강된 콘크리트 보의 하중-변위 곡선을 도출하였다. 또한, 두 타입의 근에 대하여 인발 실험 을 수행하였다. 다음으로 3차원 유한요소 해석을 통하여 실험 결과를 검증하였다. 본 연구로부터 도출은 결과는 GFRP 보강근이 철근을 대체하는 휨 및 인발 부착 성능을 보유하고 있음을 보여 준다.
        4,000원
        3.
        2018.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This paper presents experimental results for evaluating bond strength of FRP Hybrid Bars(HYB). In order to confirm the bond strength of HYB, direct bond strength tests were performed on 20 specimens. 20 specimens made of deformed steel bars were also tested for relative comparison. HYB and deformed steel bars were embedded in a concrete block with a size of 200 mm and different attachment lengths were applied depending on the diameter of the reinforcing bars. During the test, load and relative displacement(slip) were measured and the load-displacement behaviors of all specimens were analyzed from the measured results. The maximum bond strength of deformed steel bars were higher than that of HYB regardless of its diameter. However, after the maximum load, the deformed steel bars were more dominant than the HYB in the sudden load reduction tendency.
        4,000원
        4.
        2018.05 구독 인증기관·개인회원 무료
        In recent years, pavement distresses have been caused by diverse factors such as spalling, deterioration of repaired sections, blow-up, and alkali aggregate reaction due to changing climate environment of a concrete pavement and its construction and maintenance conditions (supply of materials, increase in use of de-icers, etc,). As a leading repair method for deteriorated concrete pavements, partial-depth repair is implemented in accordance with guidelines of material properties for joints of a concrete pavement and field application evaluation systems, but still some of the repaired sections become deteriorated again at an early stage due to poor construction quality and failure of response to environmental impacts. Distresses that can be corrected with partial-depth repairs are largely divided into those of repair materials and of the existing pavement bonded to repair materials, and combined distress of repair materials and the existing pavement. Although re-repair methods should be different by distress type and scale than conventional pavement repair methods, appropriate repair methods and guidance for re-repairs have not been in place so far, and therefore currently, re-repair practices follow the existing manual of partial depth repairs. Therefore, this study evaluated concrete bond characteristics by removing method and repair scope for an experimental section of frequently distressed pavements to determine a re-repair scope and method for deteriorated partial depth repair sections of concrete pavement, the number of which has increased over time.
        5.
        2018.05 구독 인증기관·개인회원 무료
        Generally, asphalt binder experiences short-term aging during mixing and constructing processes in high temperature environments and long-term aging during the service life after opening the road. Binder aging inside asphalt mixtures incurs changes in strength of asphalt paved roads, which then changes physical properties of the mixture such as cracks and rutting resistance. This study aims to measure bond strength of aging asphalt binder using asphalt bond strength (ABS) test that can measure a bonding force of asphalt binder and aggregate surface using Pneumatic Adhesion Tensile Testing Instrument (PATTI) used previously in the paint industry as a testing method specified in AASHTO TP-91.
        6.
        2017.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES: A composite pavement utilizes both an asphalt surface and a concrete base. Typically, a concrete base layer provides structural capacity, while an asphalt surface layer provides smoothness and riding quality. This pavement type can be used in conjunction with rollercompacted concrete (RCC) pavement as a base layer due to its fast construction, economic efficiency, and structural performance. However, the service life and functionality of composite pavement may be reduced due to interfacial bond failure. Therefore, adequate interfacial bonding between the asphalt surface and the concrete base is essential to achieving monolithic behavior. The purpose of this study is to investigate the bond characteristics at the interface between asphalt (HMA; hot-mixed asphalt) and the RCC baseMETHODS: This study was performed to determine the optimal type and application rate of tack coat material for RCC-base composite pavement. In addition, the core size effect, temperature condition, and bonding failure shape were analyzed to investigate the bonding characteristics at the interface between the RCC base and HMA surface. To evaluate the bond strength, a pull-off test was performed using different diameters of specimens such as 50 mm and 100 mm. Tack coat materials such as RSC-4 and BD-Coat were applied in amounts of 0.3, 0.5, 0.7, 0.9, and 1.1ℓ/m2 to determine the optimal application rate. In order to evaluate the bond strength characteristics with temperature changes, a pull-off test was carried out at -15, 0, 20, and 40 °C. In addition, the bond failure shapes were analyzed using an image analysis program after the pull-off tests were completed.RESULTS: The test results indicated that the optimal application rate of RSC-4 and BD-Coat were 0.8ℓ/m2, 0.9 ℓ/m2, respectively. The core size effect was determined to be negligible because the bond strengths were similar in specimens with diameters of 50 mm and 100 mm. The bond strengths of RSC-4 and BD-Coat were found to decrease significantly when the temperature increased. As a result of the bonding failure shape in low-temperature conditions such as -15, 0, and 20 °C, it was found that most of the debonding occurred at the interface between the tack coat and RCC surface. On the other hand, the interface between the HMA and tack coat was weaker than that between the tack coat and RCC at a high temperature of 40 °C.CONCLUSIONS: This study suggested an optimal application rate of tack coat materials to apply to RCC-base composite pavement. The bond strengths at high temperatures were significantly lower than the required bond (tensile) strength of 0.4 MPa. It was known that the temperature was a critical factor affecting the bond strength at the interface of the RCC-base composite pavement.
        4,000원
        7.
        2013.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES : Bonded concrete overlay is a favorable maintenance method since the material properties are similar to existing concrete pavements. In addition, bonded concrete overlay has advantage of structural performance since the overlay layer and the existing pavement perform as a monolithic layer. It is important to have suitable bond strength criteria to secure the performance of bonded concrete overlay. This study aimed to investigate the factors influencing bond strength characteristics between existing concrete pavement and overlay material. METHODS: Bond strength between overlay and existing pavement are measured and analyzed for various conditions such as the type of overlay materials, compressive and flexure strength of overlay and existing pavement, and deterioration status of existing pavement. RESULTS: The strength of overlay material does not significantly influence the bond strength. The overlay of ultra-rapid hardening cement generally gives low bond strength. However, ultra rapid hardening polymer modified concrete gives robust bond strength. The deterioration of existing concrete significantly decrease the bond strength. CONCLUSIONS: Bond strength of bonded concrete overlay highly depends on condition of existing concrete pavement rather than overlay material.
        4,000원
        8.
        2006.09 구독 인증기관·개인회원 무료
        We found that the """interface reaction between Ni-based alloy bond, diamond, and steel core is very critical in bond strength of diamond tool. None element from metal bond diffuses into the steel core but the Fe element of steel core was easily diffused into the bond. This diffusion depth of Fe has a great effect on the bonding strength. The Cr in steel core accelerated the Fe diffusion and improved the bond strength, on the other hand, carbon decreased the strength. Ni-based alloy bond including Cr was chemically bonded with diamond by forming Cr carbide. However, the Cr and Fe in STS304 were largely interdiffused, the strength was very low. The Cr passivity layer formed at surface of STS304 made worse strength at commissure in brazing process.
        9.
        2000.04 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        HIP처리가 가스터빈 고정익 등 고온부품에 적용되는 열차폐 코팅층의 접착강도 및 고온특성에 미치는 영향을 조사하였다. 시편은 IN738LC 초합금 표면에 8wt%Y2O3-ZrO2분말을 플라즈마 용사법으로 코팅한 후 1200˚C, 100MPa의 고온, 고압에서 4시간 동안 HIP 처리하여 준비하였다. 실험결과 HIP 처리된 코팅의 경우 미세균열과 기공이 상당량 감소하였으며 EDX분석을 통해 계면에서 원자간 상호확산이 발생한 것을 확인하였다. 이러한 코팅층의 치밀화 및 상호확산으로 인해 HIP처리된 코팅층의 접착강도는 48% 이상 크게 증가하였으며 조직 또한 균질화 되었다. 반면 가열과 냉각이 반복되는 환경에서 코팅층의 내구력은 HIP 처리된 경우가 다소 저하되었다. 이는 코팅과 모재와의 열팽창 차이로 인한 변형을 완화시켜주는 기공과 미세균열이 감소되었기 때문으로 판단된다.
        4,000원
        10.
        2019.10 서비스 종료(열람 제한)
        포스트텐션 프리캐스트콘크리트(Precast Concrete, PC) 보-기둥 접합부에서는 프리스트레스가 도입된 긴장재가 접합부 내부를 관통하기 때문에, 기존의 철근콘크리트(Reinforced Concrete, RC) 보-기둥 접합부와 다른 거동을 나타내며, 포스트텐션 PC 접합부의 정확한 해석 및 설계를 위해서는 먼저 긴장재의 부착특성 및 그에 따른 접합부 거동이 명확히 규명 되어야 한다. 이 연구에서는 포스트텐션 PC 보-기둥 접합부에서 긴장재의 부착특성을 분석하고, 그에 따른 보의 거동 및 파괴모드를 규명함으로써 이를 추후 보-기둥 접합부 모델링에 활용하고자 한다.
        11.
        2018.10 서비스 종료(열람 제한)
        In this study, the bond strength of FRP reinforced inorganic adhesive developed in previous studies was exposed to high temperature. As a result of the experiment, it was confirmed that the bond strength was increased at room temperature in the range of 100 to 200 ° C, but the width gradually decreased with increasing temperature.
        12.
        2017.09 서비스 종료(열람 제한)
        To examine the practical potentials of V-ties to provide a confinement to a strengthening jacket section of existing reinforced concrete members, direct bond tests were conducted under a parameter of the V-tie details. Test results showed that V-ties with headed-end had a higher bond strength than those with the other details.
        13.
        2017.04 서비스 종료(열람 제한)
        In this study, cement mortar (KS F 4042) used for repairing concrete structures was evaluated for compressive strength and bond strength according to the mixing ratio of polymer. From the experimental results, it was confirmed that as the polymer content increases, the bond strength properties increase, but the compressive strength decreases slightly at a certain rate.
        14.
        2017.01 KCI 등재 서비스 종료(열람 제한)
        In this study, cement mortar (KS F 4042) used for repairing concrete structures was evaluated for compressive strength and bond strength according to the mixing ratio of polymer. From the experimental results, it was confirmed that as the polymer content increases, the bond strength properties increase, but the compressive strength decreases slightly at a certain rate.
        15.
        2016.10 서비스 종료(열람 제한)
        According to social needs, eco-friendly material for concrete structures has been developed in recent years. Hwang-toh is one of the eco-friendly architectural material and hwang-toh has been used by partial or complete replacement of portland cement. Pullout tests on deformed steel reinforcing bars with non-activated hwangtoh concrete are conducted in this paper. Experimental results, average bond strength of non-activated hwangtoh concrete was appeared to 7.3 MPa.
        16.
        2016.10 서비스 종료(열람 제한)
        This paper describes pullout tests on deformed steel reinforcing bars with PVA fiber-reinforced activated hwangtoh concrete (PFRC). Four pullout specimens with the variation of the replacement ratio of PFRC to cement are prepared and test. Experimental results, average bond strength of PFRC was appeared to 19.81. MPa.
        17.
        2016.04 서비스 종료(열람 제한)
        The purpose of this paper is to evaluate bond capacity of steel fiber reinforced concrete. Test variables were compressive strength of concrete and steel bar diameter and a total of six specimens in order to examine the discrepancy in bond resistance due to each variable. The specimens were tested by using universal testing machine in displacement control mode. From the test results, it can be seen that the bond strength increased with increasing diameter of steel bar for the same compressive strength of concrete. Also, the higher strength concrete is, the higher bond strength can be found in the test. Significant slip resistance inducing greater bond strength can be observed in the specimens with large diameter steel bar. All the specimens failed in splitting failure after its maximum load and compressive stress of concrete predominated in bond capacity.
        18.
        2015.10 서비스 종료(열람 제한)
        A series of tests on the bond characteristics between new and old concrete were carried out. Main test variables are type and amount of mineral admixtures, treatment method of the interface and type of waterstops. The test results showed a slightly increased bond strength when applying mineral admixtures and the interface was treated rough and dry.
        19.
        2015.07 KCI 등재 서비스 종료(열람 제한)
        용융아연도금(galvanizing)은 콘크리트 구조물의 철근 부식 문제를 해결하기 위해 사용된다. 용융아연도금 철근 콘크리트 보의 부착강도 영향에 대한 자료는 거의 없는 실정이다. 따라서, 이 연구의 목적은 용융아연도금철근이 콘크리트 보의 부착강도에 미치는 영향을 파악하는 데 있다. 용융아연도금철근을 사용한 부재와 일반철근을 사용한 부재의 구조실험을 통하여 겹침이음 거동과 부착강도 특성을 비교하였다. 실험변수로써 철근의 용융아연코팅 유무, 철근 직경과 겹침이음 길이를 고려하였다. 용융아연도금 철근콘크리트 보의 균열 및 파괴 특성을 파악하였다. 용융아연도금철근 콘크리트 보의 겹침이음부 휨 거동특성은 일반철근 콘크리트 보의 겹침이음부 휨거동과 유사한 것으로 나타난다. 또한, 용융아연도금철근의 사용은 일반철근을 사용할 때에 비해 콘크리트 보의 부착강도에 불리한 영향을 미치지는 않는 것으로 나타났다.
        20.
        2014.04 서비스 종료(열람 제한)
        The bond performance of Latex modified concrete(LMC) is excellent when compared with conventional pavement concrete. But LMC have a several problems. In order to improve the problem of LMC, Remicon latex modified concrete(Remicon LMC) was developed. In this study, the surface scaling resistance and bond properties of Remcion LMC containing extra admixture was compared with latex ratio. From the results, when latex and admixture were mixed in concrete, bond strength was improved. And, the surface scaling resistance of Remicon LMC was quite good comparing to LMC. The surface scaling resistance of Remicon LMC mixed latex ratio 8% more showed the equivalent capacity of LMC.
        1 2