본 연구에서는 CH4/CO2 혼합가스에서 CO2 분리를 위해 세라믹 중공사 접촉막 모듈(HFMC)을 이용하여 실험을 수행하였다. 고 내구성의 HFMC를 제작하기 위해, 고강도의 중공사막을 제조하여 평가하였다. 제조한 중공사막을 이용하여 HFMC를 제작하였고, 실험은 CH4/CO2 혼합 기체(30% CO2, CH4 balance)와 monoethanolamine (MEA)를 사용하였다. HFMC 운전 중 기체와 흡수제의 압력이 CO2 제거 효율에 어떠한 영향을 주는지 평가하였다. CO2 제거 효율은 기체압력이 증가함에 따라 같이 상승하였으며, CO2 흡수 flux 또한 액체유량과 함께 증가하는 추세를 보였다. 또한 CO2 흡수율이 40% 이하일 때 는 흡수제가 아래쪽에서 들어가는 향류형태인 LTS-1이 흡수제가 위쪽에서 들어가는 향류형태인 LTS-2보다 CO2 제거 성능 이 높았으며, 흡수율이 40% 이상일 때는 LTS-2가 LTS-1보다 성능이 높았다.

SiC is a material with excellent strength, heat resistance, and corrosion resistance. It is generally used as a material for SiC invertors, semiconductor susceptors, edge rings, MOCVD susceptors, and mechanical bearings. Recently, SiC single crystals for LED are expected to be a new market application. In addition, SiC is also used as a heating element applied directly to electrical energy. Research in this study has focused on the manufacture of heating elements that can raise the temperature in a short time by irradiating SiC-I2 with microwaves with polarization difference, instead of applying electric energy directly to increase the convenience and efficiency. In this experiment, Polydimethylsilane (PDMS) with 1,2 wt% of iodine is synthesized under high temperature and pressure using an autoclave. The synthesized Polycarbosilane (PCS) is heat treated in an argon gas atmosphere after curing process. The experimental results obtain resonance peaks using FT-IR and UV-Visible, and the crystal structure is measured by XRD. Also, the heat-generating characteristics are determined in the frequency band of 2.45 GHz after heat treatment in an air atmosphere furnace.

The investigation on the lightweight of automobiles has been underway in commercial vehicles as well as passenger cars due to global warming and strengthening of European emission standards. In this study, the V-arm were developed for lightweight parts using aluminum alloy instead of steel with high pressure die casting processing. This study has focused on lightweight adaptive concept design. Several models of V-arm were designed and analyzed for the fluidity and solidification. V-arm was produced with ADC12 by high pressure die-casting process. The mechanical properties of developed V-arm were measured; such as tensile strength, elongation, shear strength, and durability. The possibility of mass production with the light weight aluminum V-arm substitute from the steel. The weight was reduced about 38% from 16kg to 9.98kg. The productivity was improved with decreasing the process from 8 to 5 by All-in-0ne process using high pressure die-casting.

Using a high pressure homonizer, we report on the electrochemical performance of Li4Ti5O12(LTO) particles manufactured as anode active material for lithium ion battery. High-pressure synthesis processing is performed under conditions in which the mole fraction of Li/Ti is 0.9, the synthesis pressure is 2,000 bar and the numbers of passings-through are 5, 7 and 10. The observed X-ray diffraction patterns show that pure LTO is manufactured when the number of passings-through is 10. It is found from scanning electron microscopy analysis that the average size of synthesized particles decreases as the number of passings-through increases. LiCoO2-based active cathode materials are used to fabricate several coin half/full cells and their battery characteristics such as lifetime, rate capability and charge transfer resistance are then estimated, revealing quite good electrochemical performance of the LTO particles as an effective anode active material for lithium secondary batteries.

Cutting tools tend to wear gradually with progressing of machining process due to extremely high surface loads and temperature from the relative motions between tool and workpiece. Especially, the high cutting temperature is a dominant factor in the relation to tool life. High-pressure coolant has been reported as an effective method to prevent the severe wear from cutting temperature. This research investigates efficient supplying conditions of high-pressure coolant with the CFD results from a internal-flush drilling process. The flow rate of coolant is increased drastically up to three times under 70 bar compared to conventional way.

The purpose of this study was to examine the antioxidant properties resulting from high-pressure homogenization of wheat bran. For this purpose, the researcher compared the radicals clearance of DPPH and ABTS, the ferrousion chelating effects, and the contents of the surface-reactive phenol compounds. In the course of this study, it was possible to reduce the particle size of the wheat bran effectively by means of high-pressure homogenization. This also resulted in structural changes, such as changes in the cellular structure of wheat bran, dissipating the cellulose matrix. It was found that this process, in turn, caused the phenol compounds which were entrapped inside the cellulose matrix or bound by polysaccharides to be released, affecting the antioxidation. As the intensity of high-pressure homogenization process increased, the radical clearance of DPPH and ABTS, as well as the surface reactive phenol compound, increased in return, while the ferrous-ion chelating effect decreased without any statistical significance, however (p > 0.05). Therefore, it would be safe to conclude that high-pressure homogenization could be an effective solution to increasing the antioxidant properties of wheat bran, which, in turn, could be used as a functional material (a natural antioxidant) in food industries

In this study, the behavior of densification of copper powders during high-pressure torsion (HPT) at room temperature is investigated using the finite element method. The simulation results show that the center of the workpiece is the first to reach the true density of copper during the compressive stage because the pressure is higher at the center than the periphery. Subsequently, whole workpiece reaches true density after compression due to the high pressure. In addition, the effective strain is increased along the radius during torsional stage. After one rotation, the periphery shows that the effective strain is increased up to 25, which is extensive deformation. These high pressure and severe strain do not only play a key role in consolidation of copper powders but also make the matrix harder by grain refinement.

본 연구에서는 초임계 CO2 추출법을 이용하여 공정변수가 대두유의 수율에 미치는 영향과 초고압 처리가 초임계 추출에 미치는 영향에 대하여 분석하였다. RSM 실험법을 통한 최적화 실험에서 468.18 bar, 80.23oC, 46.82 g/min의 조건에서 최대값 25.88%를 나타내었다. 초임계 추출법의 최적추출조건에서 초고압 전처리 후 추출 수율은 17.15-23.66%로 전처리 전보다 감소하는 경향을 나타내었다. 462.13MPa, 1분의 추출조건에서 정상점은 최대값으로 24.91%가 예측되었다. 초고압 전처리 후 초임계 추출에서 수율이 증가하지 않은 이유는 초고압 전처리시 입자의 뭉침현상이 일어나 평균입자크기가 증가하여 나타난 현상으로 추론하였다. 결과적으로 초고압 전처리는 초임계 추출 수율 증가에 영향을 미치지 못하는 것을 알 수 있었다. 초임계 CO2 추출법을 이용하여 대두유를 추출할 경우 추출 압력, 유량이 높을수록 추출온도가 낮을수록 더 많은 양의 대두유를 추출할 수 있다.

This study was conducted to develop HTHP ginseng (high temperature and high pressure ginseng) with improved antioxidative activity and phenolic acid composition by high temperature and high pressure process. The HTHP ginseng extract was analyzed for the total phenol content, DPPH radical scavenging activity and phenolic acid composition. The total phenol content was increased in HTHP ginseng (14.76 ㎎/g) compared to raw ginseng (3.59 ㎎/g) and red ginseng (3.93 ㎎/g). DPPH radical scavenging activities of HTHP ginseng, raw ginseng and red ginseng extracts were 4.8～78.4%, 1～47.4% and 1.8～56.5% at 1～100 ㎎/㎖ concentration. Also ABTS radical scavenging activities of HTHP ginseng, raw ginseng and red ginseng extracts were 8.9～99.8%, 3.4～96% and 1.2～96.5% at 1～100 ㎎/㎖ concentration. In HPLC analysis, amounts of measured phenolic acid of HTHP ginseng greatly increased than raw ginseng and red ginseng, but salicylic acid was not detected in HTHP ginseng. In addition, DPPH radical scavenging activity of phenolic acid from HTHP ginseng was increased. Consequently, we believe high temperature and high pressure process is better method than existing method to increase the bioactivity of ginseng.

In this study, electrolytic copper powders were consolidated by high-pressure torsion process (HPT) which is the most effective process to produce bulk ultrafine grained and nanocrystalline metallic materials among various severe plastic deformation processes. The bulk samples were manufactured by the HPT process at 2.5 GPa and 1/2, 1 and 10 turns. After 10 turns, full densification was achieved by high pressure with shear deformation and ultrafine grained structure (average grain size of 677 nm) was observed by electron backscatter diffraction and a scanning transmission electron microscope.

유기용매와 초임계유체를 사용하여 대두분말에서 지방성분을 추출하는 공정에서 분말화공정(분쇄)의 시간의 변화에 따른 입자도와 초고압처리에 의한 추출속도를 측정하였다. 대두분말의 입자가 작을수록 추출속도가 향상되었으면 이는 입자의 크기가 작아짐에 따라 전체적인 표면적이 증가하여 고-액추출에서 중요한 반응기작인 물질전달속도를 증가시켰기 때문이라 판단된다. 초고압공정을 적용 시 동일한 입자크기에서 추출속도가 현저히 향상되었으며 이는 대두분말 내부에서 발생하는 확산현상에 대한 저항이 초고압상태에서의 변화로 감소되었기 때문이라 사료된다. 초임계유출에 의한 추출은 수율이 낮은 단점이 있으나 입자의 크기가 큰 상태에서는 초고압처리를 전처리로 사용할 경우 시간당 추출량을 상당부분 증가시킬 수 있음을 보여주었으나, 입자크기가 작을 경우 초고압처리가 영향을 미치지 못함을 보여주었다.

Metal powder for dust core application was developed. The powder can be produced improved high-pressure water atomization process. The process has produced powder of spherical shape and lower coercivity. The dust core obta ined shows lower core loss.

본 연구는 산업 폐기물인 비지를 활용하여 부가 가치가 높은 가공식품을 개발하기 위한 일환으로 수행되었다. 즉 대두 가공 부산물인 비지를 활용하여 죽류, 음료류 및 유동 식 등의 제품으로 개발하기 위해, 초고압균질 가공 기술을 활용하여 초미세 비지 현탁액을 제조하고 추출수율, 영양 성분 및 항산화성을 확인하였다. 비지 분산액을 homogenizer 를 이용하여 1,0000 rpm에서 5분 분쇄한 후 1,000bar, 1,500bar 및 2,000bar의 압력을 가해 고압균질 가공 처리 하였다. 고압균질 가공처리한 모든 실험구가 대조군에 비 하여 추출수율이 유의적으로 증가하였다(p<0.05). 초고압 균질 처리 후 총당, 환원당 및 가용성 식이섬유의 함량은 유의적으로 증가하였으며, 불용성 식이섬유는 유의적으로 감소하였다(p<0.05). 단백질 함량과 유리아미노산 함량은 대조군보다 높은 경향을 나타내었다. 총 폴리페놀 함량은 처리 압력이 높아질수록 유의적으로 증가하였으며, ABTS 라디칼 소거능도 유의적으로 증대되었다(p<0.05). 초고압 균질 가공 기술은 비지의 영양성분과 항산화성을 증가시키 는 매우 효과적인 가공방법이며, 비지의 영양성분을 효율적 으로 활용하여 가공식품을 제조할 수 있음을 확인하였다.

Curcuma longa L. leaf was extracted by water at 60˚C for 12 hours after being treatment of Ultra High Pressure under 500 MPa for 5-15 minute. The high pressure extraction for 15 minute (HPE15) was measured the highest extraction yield of 25.48% (w/w), compared to those from conventional extraction methods. The HPE15 showed the lowest cytotoxicity as 11.97% in adding 1.0mg/mℓ of concentration. Also, HPE15 was measured the highest inhibition of hyaluronidase as 44.48% in adding 1.0mg/mℓ. In addition, The production of NO from macrophages was measured as 7.06μM in adding 1.0mg/mℓ of HPE15, which was lower than the those from others processes. Finally, HPE15 significantly reduced up to 649.44pg/mℓ of ProstaglandinE2 production from UV-irradiation. These results suggest that the Curcuma longa Linne leaf extract from high pressure process might enhance the skin immune activities possibly by high elution of active components than other processes.

This study was to investigate the improvement of immune activities of the extracts from Codonopsis lan-ceolata by stepwise steaming process and high pressure process. The phenol contents was 8.742㎍/㎎ which was higher thanthat from conventional extraction using 70% ethyl alcohol at 80℃ for 24hours. All of extracts at a concentration of 1.0㎎/㎖showed relatively low cytotoxicity on human normal kidney cell (HEK293) in range of 16 19%. The immune B and T cellgrowth was improved by extracts using the steamed and high pressure precess of C. lanceolata up to 180×10⁴cells/㎖ and96×10⁴cells/㎖, respectively. The extract prepared also greatly increased the secretion of both IL-6 and TNF-α from thestepwise steamed and high pressure process. This results can conclude that stepwise steamed and high pressure processeffectively released active biomaterials which could important role in enhancing immune activity in the body.

According to previous reports, antioxidant activities of Codonopsis lanceolata could be increased by a steaming process. This study was performed to improve its antioxidant activity and skin whitening activities of C. lanceolata by high pressure and stepwise steaming complex process. The complex processed C. lanceolata showed highest free radical scavenging acitivity as 45.21%, and for phenol and flavonoid contents, complex processed C. lanceolata contained higher than those from conventional extraction process or steaming process alone. The Cytotoxicity of all C. lanceolata extracts also showed low cytotoxicity against human fibroblast cell (CCD-986sk) as 4.49 ~ 10.40%. In whitening activity, high inhibition of tyrosinase activity was estimated as 25.08% by adding the extracts from complex process. We found that whitening and antioxidant activity of complex processed C. lancolata extract was higher than those obtained from conventional extraction and a steaming process because various kinds of antioxidant compounds could be easily released by combined process, compared to one of each process.

This study was performed to enhance anticancer activities of Lithospermum erythrorhizon by eluting high amount of shikonin through ultra high pressure process. Extraction yield was increased up to 5~10% by ultra high pressure process, compare to the normal extraction processes such as water solvent extraction, 70% ethyl alcohol solvent extraction. The cytotoxicity of the extracts (1.0μg/ml) from ultra high pressure process was showed the lowest cytotoxicity 13.4% for human lung cell (HEL299). The anticancer activities showed 80~85% by adding 1.0μg/ml of the extracts from ultra high pressure process in several cancer cell lines such as AGS, Hep3B, MCF-7 and HeLa cells. Among them, MCF-7 cell of the endocrine system was highest inhibited than other cells. The anticancer activities of the extracts from ultra high pressure extraction process showed 10~15%, which was higher than the extracts from normal extraction processes. From HPLC analysis of the extracts, the contents of shikonin in the extracts from ultra high pressure process was 11.42% (w/w), which was 20% higher than others. This results indicate that ultra high pressure process could increase the extraction yield of shikonin and other contents, which resulted in higher anticancer activities.